summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-02-27MIPS: Octeon: Use optimized memory barrier primitives.David Daney2-13/+31
In order to achieve correct synchronization semantics, the Octeon port had defined CONFIG_WEAK_REORDERING_BEYOND_LLSC. This resulted in code that looks like: sync ll ... . . . sc ... . . sync The second SYNC was redundant, but harmless. Octeon has a SYNCW instruction that acts as a write-memory-barrier (due to an erratum in some parts two SYNCW are used). It is much faster than SYNC because it imposes ordering on the writes, but doesn't otherwise stall the execution pipeline. On Octeon, SYNC stalls execution until all preceeding writes are committed to the coherent memory system. Using: syncw;syncw ll . . . sc . . Has identical semantics to the first sequence, but is much faster. The SYNCW orders the writes, and the SC will not complete successfully until the write is committed to the coherent memory system. So at the end all preceeding writes have been committed. Since Octeon does not do speculative reads, this functions as a full barrier. The patch removes CONFIG_WEAK_REORDERING_BEYOND_LLSC, and substitutes SYNCW for SYNC in write-memory-barriers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/850/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: New macro smp_mb__before_llsc.David Daney6-25/+32
Replace some instances of smp_llsc_mb() with a new macro smp_mb__before_llsc(). It is used before ll/sc sequences that are documented as needing write barrier semantics. The default implementation of smp_mb__before_llsc() is just smp_llsc_mb(), so there are no changes in semantics. Also simplify definition of smp_mb(), smp_rmb(), and smp_wmb() to be just barrier() in the non-SMP case. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/851/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Remove unused macros from barrier.hDavid Daney1-2/+0
The smp_llsc_rmb() and smp_llsc_wmb() macros are not used in the tree, remove them. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/848/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Octeon: Register some devices on the I2C bus.David Daney1-0/+13
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: Rade Bozic <rade.bozic.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/845/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: I2C: Add driver for Cavium OCTEON I2C ports.Rade Bozic3-0/+662
Signed-off-by: Rade Bozic <rade.bozic.ext@nsn.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: rade.bozic.ext@nsn.com Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/890/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Octeon: Add I2C platform device.David Daney2-0/+77
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: Rade Bozic <rade.bozic.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/847/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Simplify param.h by using <asm-generic/param.h>Robert P. J. Day1-16/+1
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/810/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: get rid of common/reset.cManuel Lauss8-225/+99
Implement reset / poweroff in the board code instead. The peripheral reset code is gone too since YAMON which all in-tree boards use does the same work when it boots. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/783/ Patchwork: http://patchwork.linux-mips.org/patch/882/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Two-level pagetables for 64-bit kernels with 64KB pages.David Daney8-35/+71
For 64-bit kernels with 64KB pages and two level page tables, there are 42 bits worth of virtual address space This is larger than the 40 bits of virtual address space obtained with the default 4KB Page size and three levels, so there are no draw backs for using two level tables with this configuration. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/761/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: irq: use runtime CPU type detectionManuel Lauss1-43/+54
Use runtime CPU detection instead of relying on preprocessor symbols. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/701/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Only build AU1000 INTC code for compatible cpusManuel Lauss3-10/+12
Use the GPIO config symbol to only build Au1000 interrupt code on chips with compatible hw. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/670/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: use runtime cpu detection in GPIO code.Manuel Lauss2-49/+51
Remove the cpu subtype cpp macros in favor of runtime detection, to improve compile coverage of the alchemy common code. (Increases kernel size by 700 bytes). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27NET: au1000-eth: Convert to platform_driver modelFlorian Fainelli2-218/+232
This patch converts the au1000-eth driver to become a full platform-driver as it ought to be. We now pass PHY-speficic configurations through platform_data but for compatibility the driver still assumes the default settings (search for PHY1 on MAC0) when no platform_data is passed. Tested on my MTX-1 board. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Patchwork: http://patchwork.linux-mips.org/patch/619/ Patchwork: http://patchwork.linux-mips.org/patch/963/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Add au1000-eth platform deviceFlorian Fainelli3-0/+124
This patch makes the board code register the au1000-eth platform device. The au1000-eth platform data can be overriden with the au1xxx_override_eth_cfg function like it has to be done for the Bosporus board which uses a different MAC/PHY setup. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: David Miller <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/618/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: DB1200 defconfig updateManuel Lauss1-631/+850
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS/SOUND: Alchemy: DB1200 AC97+I2S audio support.Manuel Lauss5-150/+200
Machine driver for DB1200 AC97 and I2S audio systems, intended as a proper reference asoc machine for Alchemy-based systems. AC97/I2S can be selected at boot time by setting switch S6.7. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: alsa-devel@alsa-project.org Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Extended DB1200 board support.Manuel Lauss8-75/+654
Create own directory for DB1200 code and update it with new features. - SPI support: - tmp121 temperature sensor - SPI flash on DB1200 - I2C support - NE1619 sensor - AT24 eeprom - I2C/SPI can be selected at boot time via switch S6.8 - Carddetect IRQs for SD cards. - gen_nand based NAND support. - hexleds count sleep/wake transitions. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: physmap-flash for all devboardsManuel Lauss11-173/+163
Replace the devboard NOR MTD mapping driver with physmap-flash support. Also honor the "swapboot" switch settings wrt. to the layout of the NOR partitions. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Don't include <linux/smp_lock.h> unnecessarily.Ralf Baechle4-4/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27SERIAL 8250: Fixes for Alchemy UARTs.Manuel Lauss1-7/+8
Limit the amount of address space claimed for Alchemy serial ports to 0x1000. On the Au1300, ports are only 0x1000 apart, and the registers only extend to 0x110 at most on all supported alchemy models. On the Au1300 the autodetect logic no longer works and this makes it necessary to specify the port type through platform data. Because of this the MSR quirk needs to be moved outside the autoconfig() function which will no longer be called when UPF_FIXED_TYPE is specified. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: UARTs are of type 16550AManuel Lauss1-1/+3
UART autodetection breaks on the Au1300 but the IP blocks are identical, at least according to the datasheets. Help the 8250 driver by passing on uart type information via platform data. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Turn on -Werror for devboards and xss1500Florian Fainelli2-0/+4
Warnings being suppressed, we can now turn on -Werror for boards which did not have it already (devboards and xss1500). Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Fix warnings in DB1x00 / PB1000 / PB1550 board setup codeFlorian Fainelli3-5/+10
This patch fixes warnings due to potentially unused variables in board setup code or mixed variables declaration and code (forbidden by ISO C90). Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove unused SYS area structureManuel Lauss1-49/+0
Nothing in-tree uses it, so get rid of it. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: get rid of superfluous UART definitionsManuel Lauss2-115/+21
Remove unused uart bit definitions and base macros. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: prom_putchar is board dependentManuel Lauss7-69/+51
This patch replaces the general alchemy prom_putchar() implementation in favor of board-specific versions: The UART where the output of prom_putchar is directed to really depends on the board, the current implementation hardcodes this on a per-SoC basis which is just wrong. So a generic uart tx function is provided in the alchemy headers, and the boards can provide their own prom_putchar with custom destination uart, and all in-kernel alchemy boards support early printk. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: change dbdma to accept physical memory addressesManuel Lauss7-26/+26
DMA can only be done from physical addresses; move the "virt_to_phys" source/destination buffer address translation from the dbdma queueing functions (since the hardware can only DMA to/from physical addresses) to their respective users. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove dbdma compat macrosManuel Lauss7-51/+32
Remove dbdma compat macros, move remaining users over to default queueing functions and -flags. (Queueing function signature has changed in order to give a build failure instead of silent functional changes due to the no longer implicitly specified DDMA_FLAGS_IE flag) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: reduce size of irq dispatcherManuel Lauss1-3/+5
By replacing an extra do_IRQ with a goto, the assembly shrinks from 260 to 212 bytes (gcc-4.3.4). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Stop IRQ name sharingManuel Lauss19-665/+743
Eliminate the sharing of IRQ names among the differenct Alchemy variants. IRQ numbers need no longer be hidden behind a CONFIG_SOC_AU1XXX symbol: step 1 in my quest to make the Alchemy code less reliant on a hardcoded subtype. This patch also renames the GPIO irq number constants. It's really an interrupt line, NOT a GPIO number! Code which relied on certain irq numbers to have the same name across all supported cpu subtypes is changed to determine current cpu subtype at runtime; in some places this isn't possible so a "compat" symbol is used. Run-tested on DB1200. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Simple cpu subtype detectorManuel Lauss1-0/+31
Extract the alchemy chip variant from c0_prid register. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/14/ Patchwork: http://patchwork.linux-mips.org/patch/707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: higher priority for system timer.Manuel Lauss1-5/+5
Raise RTCMATCH2 interrupt priority in case it is used as the system timer tick. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Remove USB_DEV_REQ_INT prioritization hackManuel Lauss1-28/+22
The Alchemy hardware provides a method to prioritize interrupts on a controller by assigning them to a differenct core request line. Assign usb device request interrupt to IC0 Request 0 (which has highest priority in the core and the dispatcher) and others to Request 1. The explicit check for usb device request occurrence should be obsolete now. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: XXS1500 PCMCIA driver rewriteManuel Lauss7-206/+433
Rewritten XXS1500 PCMCIA socket driver, standalone (doesn't depend on au1000_generic.c) and added carddetect IRQ support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboards: wire up new PCMCIA driver.Manuel Lauss22-125/+412
Register the PCMCIA driver on all boards supported by it, get rid of now-unused pcmcia macros in the board headers (and subsequently empty pb1100/pb1500 ones). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: PCMCIA: new socket driver for Au1000 demoboards.Manuel Lauss9-451/+660
New PCMCIA socket driver for all Db/Pb1xxx boards (except Pb1000), which replaces au1000_db1x00.c and (most of) au1000_pb1x00.c. Notable improvements: - supports Db1000, DB/PB1100/1500/1550/1200. - support for carddetect and statuschange IRQs. - pcmcia socket mem/io/attr areas and irqs passed through platform resource information. - doesn't freeze system during card insertion/ejection like the one it replaces. - boardtype is automatically detected using BCSR ID register. Run-tested on the DB1200. Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove board_init_irq() function.Manuel Lauss20-348/+192
remove board_init_irq(): On all in-kernel boards it is sufficient to initialize board interrupts in an arch_initcall by using the default linux irq functions. Some small irqmap.c files have been folded into board_setup files. Run-tested on DB1200; compile-tested on all other affected boards. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboards: factor out PB1200 IRQ cascade code.Manuel Lauss3-70/+76
Move the PB1200 IRQ cascade code out to the BCSR support code: upcoming DB1300 support can use it too. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboard register abstractionManuel Lauss19-596/+475
All Alchemy development boards have external CPLDs with a few registers in them. They all share an identical register layout with only a few minor differences (except the PB1000) in bit functions and base addresses. This patch - adds a primitive facility to initialize and use these external registers, - replaces all occurrences of bcsr->xxx accesses with calls to the new functions (the pb1200 cascade irq handling code is special). - collects BCSR register information scattered throughout the board headers in a central place. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Fix build error for uncompressed non-plain vmlinux kernelsRalf Baechle1-2/+11
Seen on rm200_defconfig for example: CC arch/mips/boot/compressed/decompress.o /home/ralf/src/linux/upstream-linus/arch/mips/boot/compressed/decompress.c: In function ‘decompress_kernel’: /home/ralf/src/linux/upstream-linus/arch/mips/boot/compressed/decompress.c:116: error: implicit declaration of function ‘decompress’ make[3]: *** [arch/mips/boot/compressed/decompress.o] Error 1 make[2]: *** [vmlinuz.ecoff] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27Merge branch 'for-linus' of ↵Linus Torvalds28-84/+631
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Fix preallocating of memory PM / Hibernate: Remove swsusp.c finally PM / Hibernate: Remove trailing space in message PM: Allow SCSI devices to suspend/resume asynchronously PM: Allow USB devices to suspend/resume asynchronously USB: implement non-tree resume ordering constraints for PCI host controllers PM: Allow PCI devices to suspend/resume asynchronously PM / Hibernate: Swap, remove useless check from swsusp_read() PM / Hibernate: Really deprecate deprecated user ioctls PM: Allow device drivers to use dpm_wait() PM: Start asynchronous resume threads upfront PM: Add facility for advanced testing of async suspend/resume PM: Add a switch for disabling/enabling asynchronous suspend/resume PM: Asynchronous suspend and resume of devices PM: Add parent information to timing messages PM: Document device power attributes in sysfs PM / Runtime: Add sysfs switch for disabling device run-time PM
2010-02-27Remove EXPERIMENTAL from NFS_FSCACHEChristian Kujau1-2/+1
There's currently an open Ubuntu bug[0], with the intent to compile NFS_FSCACHE (and possibly AFS_FSCACHE, 9P_FSCACHE) into the standard Ubuntu kernel. However, since *_FSCACHE still depends on EXPERIMENTAL, this won't happen. As Arjan van de Ven pointed out[1], the EXPERIMENTAL flag doesn't mean that much any more, I propose the following patch to fs/nfs/Kconfig. I'd do the same for fs/9p/Kconfig and fs/afs/Kconfig, but as I did not test 9p or AFS, I feel it would not be appropriate for me to remove the flag. [0] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/440522/comments/5 [1] http://lkml.org/lkml/2010/1/23/145 Signed-off-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-27Merge branch 'for_linus' of ↵Linus Torvalds7-196/+575
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: toshiba_acpi: Add full hotkey support hp-wmi: Add support for tablet rotation key dell-laptop: Add another Dell laptop to the DMI whitelist classmate-laptop: use a single MODULE_DEVICE_TABLE to get correct aliases dell-laptop: Pay attention to which devices the hardware switch controls dell-laptop: Use buffer with 32-bit physical address dell-laptop: Blacklist machines not supporting dell-laptop dell-laptop: Block software state changes when rfkill hard blocked dell-laptop: Fix small memory leak dell-laptop: Fix platform device unregistration dell-laptop: Update rfkill state on kill switch compal-laptop: Replace sysfs support with rfkill support compal-laptop: Add support for known Compal made Dell laptops MAINTAINERS: update drivers/platform/x86 information
2010-02-27Merge branch 'for-linus' of ↵Linus Torvalds8-58/+180
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: use bastmode in debugfs output dlm: Send lockspace name with uevents dlm: send reply before bast dlm: fix ordering of bast and cast
2010-02-27Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds79-1596/+1666
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (52 commits) fs/xfs: Correct NULL test xfs: optimize log flushing in xfs_fsync xfs: only clear the suid bit once in xfs_write xfs: kill xfs_bawrite xfs: log changed inodes instead of writing them synchronously xfs: remove invalid barrier optimization from xfs_fsync xfs: kill the unused XFS_QMOPT_* flush flags V2 xfs: Use delay write promotion for dquot flushing xfs: Sort delayed write buffers before dispatch xfs: Don't issue buffer IO direct from AIL push V2 xfs: Use delayed write for inodes rather than async V2 xfs: Make inode reclaim states explicit xfs: more reserved blocks fixups xfs: turn off sign warnings xfs: don't hold onto reserved blocks on remount,ro xfs: quota limit statvfs available blocks xfs: replace KM_LARGE with explicit vmalloc use xfs: cleanup up xfs_log_force calling conventions xfs: kill XLOG_VEC_SET_TYPE xfs: remove duplicate buffer flags ...
2010-02-27Merge branch 'ibft-fixes' of ↵Linus Torvalds2-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6 * 'ibft-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6: ibft: Update MAINTAINERS file. drivers/firmware/iscsi_ibft.c: remove NIPQUAD_FMT, use %pI4
2010-02-27Merge branch 'v4l_for_linus' of ↵Linus Torvalds293-4780/+27854
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits) V4L-DVB: cx88-dvb: remove extra attribution for core V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index V4L/DVB: Add support for SMT7020 to cx88 V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix V4L/DVB: gspca_stv06xx: Add support for camera button V4L/DVB: gspca_ov519: add support for the button on ov511 based cams V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams V4L/DVB: gspca_ov519: add support for the button on ov519 based cams V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set V4L/DVB: gspca_main: some input error handling fixes V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs V4L/DVB: gspca_pac7302: much improved exposure control V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls V4L/DVB: Documentation: gspca.txt: update known mr97310a cams V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480 V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl ...
2010-02-27dvb-core: Fix DoS bug in ULE decapsulation code that can be triggered by an ↵Ang Way Chuang1-0/+1
invalid Payload Pointer ULE (Unidirectional Lightweight Encapsulation RFC 4326) decapsulation has a bug that causes endless loop when Payload Pointer of MPEG2-TS frame is 182 or 183. Anyone who sends malicious MPEG2-TS frame will cause the receiver of ULE SNDU to go into endless loop. This patch was generated and tested against linux-2.6.32.9 and should apply cleanly to linux-2.6.33 as well because there was only one typo fix to dvb_net.c since v2.6.32. This bug was brought to you by modern day Santa Claus who decided to shower the satellite dish at Keio University with heavy snow causing huge burst of errors. We, receiver end, received Santa Claus's gift in the form of kernel bug. Care has been taken not to introduce more bug by fixing this bug, but please scrutinize the code for I always produces buggy code. Signed-off-by: Ang Way Chuang <wcang79@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-27Merge branch 'kmemcheck-for-linus' of ↵Linus Torvalds3-3/+17
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6 * 'kmemcheck-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: kmemcheck: Test the full object in kmemcheck_is_obj_initialized()
2010-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-viptLinus Torvalds6-1/+89
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-vipt: xfs: fix xfs to work with Virtually Indexed architectures sh: add mm API for DMA to vmalloc/vmap areas arm: add mm API for DMA to vmalloc/vmap areas parisc: add mm API for DMA to vmalloc/vmap areas mm: add coherence API for DMA to vmalloc/vmap areas
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-03 22:33:05 +0300