summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-08-18KVM: VMX: always require WB memory type for EPTDavid Hildenbrand1-2/+7
We already always set that type but don't check if it is supported. Also for nVMX, we only support WB for now. Let's just require it. Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-18KVM: VMX: cleanup EPTP definitionsDavid Hildenbrand2-19/+17
Don't use shifts, tag them correctly as EPTP and use better matching names (PWL vs. GAW). Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-18KVM: SVM: delete avic_vm_id_bitmap (2 megabyte static array)Denys Vlasenko1-40/+21
With lightly tweaked defconfig: text data bss dec hex filename 11259661 5109408 2981888 19350957 12745ad vmlinux.before 11259661 5109408 884736 17253805 10745ad vmlinux.after Only compile-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: x86@kernel.org Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-18KVM: x86: fix use of L1 MMIO areas in nested guestsPaolo Bonzini4-5/+20
There is currently some confusion between nested and L1 GPAs. The assignment to "direct" in kvm_mmu_page_fault tries to fix that, but it is not enough. What this patch does is fence off the MMIO cache completely when using shadow nested page tables, since we have neither a GVA nor an L1 GPA to put in the cache. This also allows some simplifications in kvm_mmu_page_fault and FNAME(page_fault). The EPT misconfig likewise does not have an L1 GPA to pass to kvm_io_bus_write, so that must be skipped for guest mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [Changed comment to say "GPAs" instead of "L1's physical addresses", as per David's review. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-18KVM: x86: Avoid guest page table walk when gpa_available is setBrijesh Singh5-22/+17
When a guest causes a page fault which requires emulation, the vcpu->arch.gpa_available flag is set to indicate that cr2 contains a valid GPA. Currently, emulator_read_write_onepage() makes use of gpa_available flag to avoid a guest page walk for a known MMIO regions. Lets not limit the gpa_available optimization to just MMIO region. The patch extends the check to avoid page walk whenever gpa_available flag is set. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> [Fix EPT=0 according to Wanpeng Li's fix, plus ensure VMX also uses the new code. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [Moved "ret < 0" to the else brach, as per David's review. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-18KVM: x86: simplify ept_misconfigPaolo Bonzini3-28/+21
Calling handle_mmio_page_fault() has been unnecessary since commit e9ee956e311d ("KVM: x86: MMU: Move handle_mmio_page_fault() call to kvm_mmu_page_fault()", 2016-02-22). handle_mmio_page_fault() can now be made static. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-15kvm: avoid uninitialized-variable warningsArnd Bergmann1-1/+2
When PAGE_OFFSET is not a compile-time constant, we run into warnings from the use of kvm_is_error_hva() that the compiler cannot optimize out: arch/arm/kvm/../../../virt/kvm/kvm_main.c: In function '__kvm_gfn_to_hva_cache_init': arch/arm/kvm/../../../virt/kvm/kvm_main.c:1978:14: error: 'nr_pages_avail' may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/arm/kvm/../../../virt/kvm/kvm_main.c: In function 'gfn_to_page_many_atomic': arch/arm/kvm/../../../virt/kvm/kvm_main.c:1660:5: error: 'entry' may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds fake initializations to the two instances I ran into. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-11kvm: x86: Disallow illegal IA32_APIC_BASE MSR valuesJim Mattson1-6/+8
Host-initiated writes to the IA32_APIC_BASE MSR do not have to follow local APIC state transition constraints, but the value written must be valid. Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-11KVM: MMU: Bail out immediately if there is no available mmu pageWanpeng Li2-10/+29
Bailing out immediately if there is no available mmu page to alloc. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-11KVM: MMU: Fix softlockup due to mmu_lock is held too longWanpeng Li1-3/+1
watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [warn_test:3089] irq event stamp: 20532 hardirqs last enabled at (20531): [<ffffffff8e9b6908>] restore_regs_and_iret+0x0/0x1d hardirqs last disabled at (20532): [<ffffffff8e9b7ae8>] apic_timer_interrupt+0x98/0xb0 softirqs last enabled at (8266): [<ffffffff8e9badc6>] __do_softirq+0x206/0x4c1 softirqs last disabled at (8253): [<ffffffff8e083918>] irq_exit+0xf8/0x100 CPU: 5 PID: 3089 Comm: warn_test Tainted: G OE 4.13.0-rc3+ #8 RIP: 0010:kvm_mmu_prepare_zap_page+0x72/0x4b0 [kvm] Call Trace: make_mmu_pages_available.isra.120+0x71/0xc0 [kvm] kvm_mmu_load+0x1cf/0x410 [kvm] kvm_arch_vcpu_ioctl_run+0x1316/0x1bf0 [kvm] kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 ? __this_cpu_preempt_check+0x13/0x20 This can be reproduced readily by ept=N and running syzkaller tests since many syzkaller testcases don't setup any memory regions. However, if ept=Y rmode identity map will be created, then kvm_mmu_calculate_mmu_pages() will extend the number of VM's mmu pages to at least KVM_MIN_ALLOC_MMU_PAGES which just hide the issue. I saw the scenario kvm->arch.n_max_mmu_pages == 0 && kvm->arch.n_used_mmu_pages == 1, so there is one active mmu page on the list, kvm_mmu_prepare_zap_page() fails to zap any pages, however prepare_zap_oldest_mmu_page() always returns true. It incurs infinite loop in make_mmu_pages_available() which causes mmu->lock softlockup. This patch fixes it by setting the return value of prepare_zap_oldest_mmu_page() according to whether or not there is mmu page zapped. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-11KVM: nVMX: validate eptp pointerDavid Hildenbrand1-5/+2
Let's reuse the function introduced with eptp switching. We don't explicitly have to check against enable_ept_ad_bits, as this is implicitly done when checking against nested_vmx_ept_caps in valid_ept_address(). Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-11KVM: MAINTAINERS improvementsAndrew Jones1-11/+26
Remove nonexistent files, allow less awkward expressions when extracting arch-specific information, and only return relevant information when using arch-specific expressions. Additionally add include/trace/events/kvm.h, arch/*/include/uapi/asm/kvm*, and arch/powerpc/kernel/kvm* to appropriate sections. The arch- specific expressions are now: /KVM/ -- All KVM /\(KVM\)|\(KVM\/x86\)/ -- X86 /\(KVM\)|\(KVM\/x86\)|\(KVM\/amd\)/ -- X86 plus AMD /\(KVM\)|\(KVM\/arm\)/ -- ARM /\(KVM\)|\(KVM\/arm\)|\(KVM\/arm64\)/ -- ARM plus ARM64 /\(KVM\)|\(KVM\/powerpc\)/ -- POWERPC /\(KVM\)|\(KVM\/s390\)/ -- S390 /\(KVM\)|\(KVM\/mips\)/ -- MIPS Signed-off-by: Andrew Jones <drjones@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-10kvm: nVMX: Add support for fast unprotection of nested guest page tablesPaolo Bonzini3-6/+5
This is the same as commit 147277540bbc ("kvm: svm: Add support for additional SVM NPF error codes", 2016-11-23), but for Intel processors. In this case, the exit qualification field's bit 8 says whether the EPT violation occurred while translating the guest's final physical address or rather while translating the guest page tables. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-10KVM: SVM: Limit PFERR_NESTED_GUEST_PAGE error_code check to L1 guestBrijesh Singh1-1/+2
Commit 147277540bbc ("kvm: svm: Add support for additional SVM NPF error codes", 2016-11-23) added a new error code to aid nested page fault handling. The commit unprotects (kvm_mmu_unprotect_page) the page when we get a NPF due to guest page table walk where the page was marked RO. However, if an L0->L2 shadow nested page table can also be marked read-only when a page is read only in L1's nested page table. If such a page is accessed by L2 while walking page tables it can cause a nested page fault (page table walks are write accesses). However, after kvm_mmu_unprotect_page we may get another page fault, and again in an endless stream. To cover this use case, we qualify the new error_code check with vcpu->arch.mmu_direct_map so that the error_code check would run on L1 guest, and not the L2 guest. This avoids hitting the above scenario. Fixes: 147277540bbc54119172481c8ef6d930cc9fbfc2 Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Lendacky <thomas.lendacky@amd.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-10KVM: X86: Fix residual mmio emulation request to userspaceWanpeng Li2-0/+2
Reported by syzkaller: The kvm-intel.unrestricted_guest=0 WARNING: CPU: 5 PID: 1014 at /home/kernel/data/kvm/arch/x86/kvm//x86.c:7227 kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm] CPU: 5 PID: 1014 Comm: warn_test Tainted: G W OE 4.13.0-rc3+ #8 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm] Call Trace: ? put_pid+0x3a/0x50 ? rcu_read_lock_sched_held+0x79/0x80 ? kmem_cache_free+0x2f2/0x350 kvm_vcpu_ioctl+0x340/0x700 [kvm] ? kvm_vcpu_ioctl+0x340/0x700 [kvm] ? __fget+0xfc/0x210 do_vfs_ioctl+0xa4/0x6a0 ? __fget+0x11d/0x210 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc2 ? __this_cpu_preempt_check+0x13/0x20 The syszkaller folks reported a residual mmio emulation request to userspace due to vm86 fails to emulate inject real mode interrupt(fails to read CS) and incurs a triple fault. The vCPU returns to userspace with vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN exit reason. However, the syszkaller testcase constructs several threads to launch the same vCPU, the thread which lauch this vCPU after the thread whichs get the vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN will trigger the warning. #define _GNU_SOURCE #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/wait.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/mman.h> #include <fcntl.h> #include <unistd.h> #include <linux/kvm.h> #include <stdio.h> int kvmcpu; struct kvm_run *run; void* thr(void* arg) { int res; res = ioctl(kvmcpu, KVM_RUN, 0); printf("ret1=%d exit_reason=%d suberror=%d\n", res, run->exit_reason, run->internal.suberror); return 0; } void test() { int i, kvm, kvmvm; pthread_t th[4]; kvm = open("/dev/kvm", O_RDWR); kvmvm = ioctl(kvm, KVM_CREATE_VM, 0); kvmcpu = ioctl(kvmvm, KVM_CREATE_VCPU, 0); run = (struct kvm_run*)mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, kvmcpu, 0); srand(getpid()); for (i = 0; i < 4; i++) { pthread_create(&th[i], 0, thr, 0); usleep(rand() % 10000); } for (i = 0; i < 4; i++) pthread_join(th[i], 0); } int main() { for (;;) { int pid = fork(); if (pid < 0) exit(1); if (pid == 0) { test(); exit(0); } int status; while (waitpid(pid, &status, __WALL) != pid) {} } return 0; } This patch fixes it by resetting the vcpu->mmio_needed once we receive the triple fault to avoid the residue. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-08KVM: arm: implements the kvm_arch_vcpu_in_kernel()Longpeng(Mike)3-3/+3
This implements the kvm_arch_vcpu_in_kernel() for ARM, and adjusts the calls to kvm_vcpu_on_spin(). Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-08KVM: s390: implements the kvm_arch_vcpu_in_kernel()Longpeng(Mike)2-2/+2
This implements kvm_arch_vcpu_in_kernel() for s390. DIAG is a privileged operation, so it cannot be called from problem state (user mode). Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-08KVM: X86: implement the logic for spinlock optimizationLongpeng(Mike)5-4/+21
get_cpl requires vcpu_load, so we must cache the result (whether the vcpu was preempted when its cpl=0) in kvm_vcpu_arch. Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-08KVM: add spinlock optimization frameworkLongpeng(Mike)13-8/+36
If a vcpu exits due to request a user mode spinlock, then the spinlock-holder may be preempted in user mode or kernel mode. (Note that not all architectures trap spin loops in user mode, only AMD x86 and ARM/ARM64 currently do). But if a vcpu exits in kernel mode, then the holder must be preempted in kernel mode, so we should choose a vcpu in kernel mode as a more likely candidate for the lock holder. This introduces kvm_arch_vcpu_in_kernel() to decide whether the vcpu is in kernel-mode when it's preempted. kvm_vcpu_on_spin's new argument says the same of the spinning VCPU. Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-07KVM: x86: use general helpers for some cpuid manipulationRadim Krčmář4-20/+14
Add guest_cpuid_clear() and use it instead of kvm_find_cpuid_entry(). Also replace some uses of kvm_find_cpuid_entry() with guest_cpuid_has(). Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-07KVM: x86: generalize guest_cpuid_has_ helpersRadim Krčmář6-150/+95
This patch turns guest_cpuid_has_XYZ(cpuid) into guest_cpuid_has(cpuid, X86_FEATURE_XYZ), which gets rid of many very similar helpers. When seeing a X86_FEATURE_*, we can know which cpuid it belongs to, but this information isn't in common code, so we recreate it for KVM. Add some BUILD_BUG_ONs to make sure that it runs nicely. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-07KVM: x86: X86_FEATURE_NRIPS is not scattered anymoreRadim Krčmář1-13/+1
bit(X86_FEATURE_NRIPS) is 3 since 2ccd71f1b278 ("x86/cpufeature: Move some of the scattered feature bits to x86_capability"), so we can simplify the code. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-07KVM: nVMX: Emulate EPTP switching for the L1 hypervisorBandan Das2-6/+124
When L2 uses vmfunc, L0 utilizes the associated vmexit to emulate a switching of the ept pointer by reloading the guest MMU. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-07KVM: nVMX: Enable VMFUNC for the L1 hypervisorBandan Das1-2/+51
Expose VMFUNC in MSRs and VMCS fields. No actual VMFUNCs are enabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-07KVM: vmx: Enable VMFUNCsBandan Das2-1/+24
Enable VMFUNC in the secondary execution controls. This simplifies the changes necessary to expose it to nested hypervisors. VMFUNCs still cause #UD when invoked. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-07KVM: nVMX: get rid of nested_release_page*David Hildenbrand1-26/+15
Let's also just use the underlying functions directly here. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> [Rebased on top of 9f744c597460 ("KVM: nVMX: do not pin the VMCS12")] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-07KVM: nVMX: get rid of nested_get_page()David Hildenbrand2-31/+32
nested_get_page() just sounds confusing. All we want is a page from G1. This is even unrelated to nested. Let's introduce kvm_vcpu_gpa_to_page() so we don't get too lengthy lines. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> [Squash pasto fix from Wanpeng Li. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-07KVM: nVMX: INVPCID supportPaolo Bonzini1-9/+25
Expose the "Enable INVPCID" secondary execution control to the guest and properly reflect the exit reason. In addition, before this patch the guest was always running with INVPCID enabled, causing pcid.flat's "Test on INVPCID when disabled" test to fail. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-07KVM: hyperv: support HV_X64_MSR_TSC_FREQUENCY and HV_X64_MSR_APIC_FREQUENCYLadi Prosek4-2/+10
It has been experimentally confirmed that supporting these two MSRs is one of the necessary conditions for nested Hyper-V to use the TSC page. Modern Windows guests are noticeably slower when they fall back to reading timestamps from the HV_X64_MSR_TIME_REF_COUNT MSR instead of using the TSC page. The newly supported MSRs are advertised with the AccessFrequencyRegs partition privilege flag and CPUID.40000003H:EDX[8] "Support for determining timer frequencies is available" (both outside of the scope of this KVM patch). Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-07Linux 4.13-rc4Linus Torvalds1-1/+1
2017-08-07Merge tag 'platform-drivers-x86-v4.13-4' of ↵Linus Torvalds1-2/+2
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fix from Darren Hart: "Fix loop preventing some platforms from waking up via the power button in s2idle: - intel-vbtn: match power button on press rather than release" * tag 'platform-drivers-x86-v4.13-4' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: intel-vbtn: match power button on press rather than release
2017-08-06Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds13-196/+290
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "A large number of ext4 bug fixes and cleanups for v4.13" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix copy paste error in ext4_swap_extents() ext4: fix overflow caused by missing cast in ext4_resize_fs() ext4, project: expand inode extra size if possible ext4: cleanup ext4_expand_extra_isize_ea() ext4: restructure ext4_expand_extra_isize ext4: fix forgetten xattr lock protection in ext4_expand_extra_isize ext4: make xattr inode reads faster ext4: inplace xattr block update fails to deduplicate blocks ext4: remove unused mode parameter ext4: fix warning about stack corruption ext4: fix dir_nlink behaviour ext4: silence array overflow warning ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize ext4: release discard bio after sending discard commands ext4: convert swap_inode_data() over to use swap() on most of the fields ext4: error should be cleared if ea_inode isn't added to the cache ext4: Don't clear SGID when inheriting ACLs ext4: preserve i_mode if __ext4_set_acl() fails ext4: remove unused metadata accounting variables ext4: correct comment references to ext4_ext_direct_IO()
2017-08-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2-0/+3
Pull MIPS fixes from Ralf Baechle: "This fixes two build issues for ralink platforms, both due to missing #includes which used to be included indirectly via other headers" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: mt7620: Add missing header MIPS: ralink: Fix build error due to missing header
2017-08-06Fix compat_sys_sigpending breakageDmitry V. Levin1-4/+7
The latest change of compat_sys_sigpending in commit 8f13621abced ("sigpending(): move compat to native") has broken it in two ways. First, it tries to write 4 bytes more than userspace expects: sizeof(old_sigset_t) == sizeof(long) == 8 instead of sizeof(compat_old_sigset_t) == sizeof(u32) == 4. Second, on big endian architectures these bytes are being written in the wrong order. This bug was found by strace test suite. Reported-by: Anatoly Pugachev <matorola@gmail.com> Inspired-by: Eugene Syromyatnikov <evgsyr@gmail.com> Fixes: 8f13621abced ("sigpending(): move compat to native") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-06ext4: fix copy paste error in ext4_swap_extents()Maninder Singh1-1/+1
This bug was found by a static code checker tool for copy paste problems. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-06ext4: fix overflow caused by missing cast in ext4_resize_fs()Jerry Lee1-1/+2
On a 32-bit platform, the value of n_blcoks_count may be wrong during the file system is resized to size larger than 2^32 blocks. This may caused the superblock being corrupted with zero blocks count. Fixes: 1c6bd7173d66 Signed-off-by: Jerry Lee <jerrylee@qnap.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org # 3.7+
2017-08-06ext4, project: expand inode extra size if possibleMiao Xie3-24/+85
When upgrading from old format, try to set project id to old file first time, it will return EOVERFLOW, but if that file is dirtied(touch etc), changing project id will be allowed, this might be confusing for users, we could try to expand @i_extra_isize here too. Reported-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Wang Shilong <wshilong@ddn.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-06ext4: cleanup ext4_expand_extra_isize_ea()Miao Xie1-9/+5
Clean up some goto statement, make ext4_expand_extra_isize_ea() clearer. Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Wang Shilong <wshilong@ddn.com>
2017-08-06ext4: restructure ext4_expand_extra_isizeMiao Xie2-40/+36
Current ext4_expand_extra_isize just tries to expand extra isize, if someone is holding xattr lock or some check fails, it will give up. So rename its name to ext4_try_to_expand_extra_isize. Besides that, we clean up unnecessary check and move some relative checks into it. Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Wang Shilong <wshilong@ddn.com>
2017-08-06ext4: fix forgetten xattr lock protection in ext4_expand_extra_isizeMiao Xie2-12/+16
We should avoid the contention between the i_extra_isize update and the inline data insertion, so move the xattr trylock in front of i_extra_isize update. Signed-off-by: Miao Xie <miaoxie@huawei.com> Reviewed-by: Wang Shilong <wshilong@ddn.com>
2017-08-06ext4: make xattr inode reads fasterTahsin Erdogan4-48/+92
ext4_xattr_inode_read() currently reads each block sequentially while waiting for io operation to complete before moving on to the next block. This prevents request merging in block layer. Add a ext4_bread_batch() function that starts reads for all blocks then optionally waits for them to complete. A similar logic is used in ext4_find_entry(), so update that code to use the new function. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-06ext4: inplace xattr block update fails to deduplicate blocksTahsin Erdogan1-3/+1
When an xattr block has a single reference, block is updated inplace and it is reinserted to the cache. Later, a cache lookup is performed to see whether an existing block has the same contents. This cache lookup will most of the time return the just inserted entry so deduplication is not achieved. Running the following test script will produce two xattr blocks which can be observed in "File ACL: " line of debugfs output: mke2fs -b 1024 -I 128 -F -O extent /dev/sdb 1G mount /dev/sdb /mnt/sdb touch /mnt/sdb/{x,y} setfattr -n user.1 -v aaa /mnt/sdb/x setfattr -n user.2 -v bbb /mnt/sdb/x setfattr -n user.1 -v aaa /mnt/sdb/y setfattr -n user.2 -v bbb /mnt/sdb/y debugfs -R 'stat x' /dev/sdb | cat debugfs -R 'stat y' /dev/sdb | cat This patch defers the reinsertion to the cache so that we can locate other blocks with the same contents. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca>
2017-08-06ext4: remove unused mode parameterTahsin Erdogan1-5/+4
ext4_alloc_file_blocks() does not use its mode parameter. Remove it. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-06ext4: fix warning about stack corruptionArnd Bergmann1-5/+6
After commit 62d1034f53e3 ("fortify: use WARN instead of BUG for now"), we get a warning about possible stack overflow from a memcpy that was not strictly bounded to the size of the local variable: inlined from 'ext4_mb_seq_groups_show' at fs/ext4/mballoc.c:2322:2: include/linux/string.h:309:9: error: '__builtin_memcpy': writing between 161 and 1116 bytes into a region of size 160 overflows the destination [-Werror=stringop-overflow=] We actually had a bug here that would have been found by the warning, but it was already fixed last year in commit 30a9d7afe70e ("ext4: fix stack memory corruption with 64k block size"). This replaces the fixed-length structure on the stack with a variable-length structure, using the correct upper bound that tells the compiler that everything is really fine here. I also change the loop count to check for the same upper bound for consistency, but the existing code is already correct here. Note that while clang won't allow certain kinds of variable-length arrays in structures, this particular instance is fine, as the array is at the end of the structure, and the size is strictly bounded. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-06ext4: fix dir_nlink behaviourAndreas Dilger2-10/+14
The dir_nlink feature has been enabled by default for new ext4 filesystems since e2fsprogs-1.41 in 2008, and was automatically enabled by the kernel for older ext4 filesystems since the dir_nlink feature was added with ext4 in kernel 2.6.28+ when the subdirectory count exceeded EXT4_LINK_MAX-1. Automatically adding the file system features such as dir_nlink is generally frowned upon, since it could cause the file system to not be mountable on older kernel, thus preventing the administrator from rolling back to an older kernel if necessary. In this case, the administrator might also want to disable the feature because glibc's fts_read() function does not correctly optimize directory traversal for directories that use st_nlinks field of 1 to indicate that the number of links in the directory are not tracked by the file system, and could fail to traverse the full directory hierarchy. Fortunately, in the past ten years very few users have complained about incomplete file system traversal by glibc's fts_read(). This commit also changes ext4_inc_count() to allow i_nlinks to reach the full EXT4_LINK_MAX links on the parent directory (including "." and "..") before changing i_links_count to be 1. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196405 Signed-off-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-06ext4: silence array overflow warningDan Carpenter1-1/+1
I get a static checker warning: fs/ext4/ext4.h:3091 ext4_set_de_type() error: buffer overflow 'ext4_type_by_mode' 15 <= 15 It seems unlikely that we would hit this read overflow in real life, but it's also simple enough to make the array 16 bytes instead of 15. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-06ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesizeJan Kara1-0/+3
ext4_find_unwritten_pgoff() does not properly handle a situation when starting index is in the middle of a page and blocksize < pagesize. The following command shows the bug on filesystem with 1k blocksize: xfs_io -f -c "falloc 0 4k" \ -c "pwrite 1k 1k" \ -c "pwrite 3k 1k" \ -c "seek -a -r 0" foo In this example, neither lseek(fd, 1024, SEEK_HOLE) nor lseek(fd, 2048, SEEK_DATA) will return the correct result. Fix the problem by neglecting buffers in a page before starting offset. Reported-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> CC: stable@vger.kernel.org # 3.8+
2017-08-06platform/x86: intel-vbtn: match power button on press rather than releaseMario Limonciello1-2/+2
This fixes a problem where the system gets stuck in a loop unable to wakeup via power button in s2idle. The problem happens because: - press power button: - system emits 0xc0 (power press), event ignored - system emits 0xc1 (power release), event processed, emited as KEY_POWER - set wakeup_mode to true - system goes to s2idle - press power button - system emits 0xc0 (power press), wakeup_mode is true, system wakes - system emits 0xc1 (power release), event processed, emited as KEY_POWER - system goes to s2idle again To avoid this situation, process the presses (which matches what intel-hid does too). Verified on an Dell XPS 9365 Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-08-06Merge tag 'media/v4.13-2' of ↵Linus Torvalds91-14173/+5162
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "This series is larger than I would like to submit for -rc4. My original intent were to sent it to either -rc2 or -rc3. Unfortunately, due to my vacations, I got a lot of pending stuff after my return, and had to do some biz trips, with prevented me to send this earlier. Several fixes: - some fixes at atomisp staging driver - several gcc 7 warning fixes - cleanup media SVG files, in order to fix PDF build on some distros - fix random Kconfig build of venus driver - some fixes for the venus driver - some changes from semaphone to mutex in ngene's driver - some locking fixes at dib0700 driver - several fixes on ngene's driver and frontends to make it properly support some new boards added on Kernel 4.13 - some fixes to CEC drivers - omap_vout: vrfb: convert to dmaengine - docs-rst: document EBUSY for VIDIOC_S_FMT Please notice that the big diffstat changes here are at the SVG files. Visually, the images look the same, but the file size is now a lot smaller than before, and they don't use some XML tags that would cause them to be badly parsed by some ImageMagick versions, or to require a lot of memory by TeTex, with would break PDF output on some distributions" * tag 'media/v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (68 commits) media: atomisp2: array underflow in imx_enum_frame_size() media: atomisp2: array underflow in ap1302_enum_frame_size() media: atomisp2: Array underflow in atomisp_enum_input() media: platform: davinci: drop VPFE_CMD_S_CCDC_RAW_PARAMS media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl media: venus: don't abuse dma_alloc for non-DMA allocations media: venus: hfi: fix error handling in hfi_sys_init_done() media: venus: fix compile-test build on non-qcom ARM platform media: venus: mark PM functions as __maybe_unused media: cec-notifier: small improvements media: pulse8-cec: persistent_config should be off by default media: cec: cec_transmit_attempt_done: ignore CEC_TX_STATUS_MAX_RETRIES media: staging: atomisp: array underflow in ioctl media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds media: svg: avoid too long lines media: svg files: simplify files media: selection.svg: simplify the SVG file media: vimc: set id_table for platform drivers media: staging: atomisp: disable warnings with cc-disable-warning media: davinci: variable 'common' set but not used ...
2017-08-05ext4: release discard bio after sending discard commandsDaeho Jeong1-1/+3
We've changed the discard command handling into parallel manner. But, in this change, I forgot decreasing the usage count of the bio which was used to send discard request. I'm sorry about that. Fixes: a015434480dc ("ext4: send parallel discards on commit completions") Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-08 16:20:18 +0300