summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-02-07Merge tag 'sunxi-dt-for-4.11-2' of ↵Arnd Bergmann5-0/+176
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Pull "Allwinner DT changes for 4.11, part 2" from Maxime Ripard: Support for the audio codec and Mali GPU for the A33 * tag 'sunxi-dt-for-4.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun8i: sinlinx: Enable audio nodes ARM: dts: sun8i: parrot: Enable audio nodes ARM: dts: sun8i: Add audio codec, dai and card for A33 ARM: sun8i: dt: Add mali node dt-bindings: gpu: Add Mali Utgard bindings
2017-02-07Merge tag 'sunxi-dt-for-4.11' of ↵Arnd Bergmann32-71/+1436
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Pull "Allwinner DT changes for 4.11" from Maxime Ripard: The usual chunk of DT changes, most notably: - Support for the H2+ and the V3s - CPUFreq support for the A33 - SPDIF support for the A31 and H3 - New boards: Beelink X2, Lichee Pi One, Lichee Pi Zero, Orange Pi Zero * tag 'sunxi-dt-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (42 commits) ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2 ARM: dts: sun8i-h3: Add the SPDIF block to the H3 ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3 ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB ARM: sun8i: sina33: Enable display ARM: sun8i: a23/a33: Add the oscillators accuracy ARM: sun8i: a23/a33: Enable the real LOSC and use it ARM: dts: sunxi: add support for Lichee Pi Zero board ARM: dts: sunxi: add dtsi file for V3s SoC ARM: dts: sun6i: sina31s: Enable USB OTG controller in peripheral mode ARM: dts: sun8i: reference-design: use AXP223 DTSI ARM: dts: sun8i: parrot: use AXP223 DTSI ARM: dts: sun8i: sina33: use AXP223 DTSI ARM: dts: sun8i: a33-olinuxino: use AXP223 DTSI ARM: dts: add DTSI for AXP223 dt-bindings: power: axp20x-usb: add axp223 compatible ARM: dts: sun7i: Add wifi dt node on Banana Pro ARM: dts: sun6i: Add SPDIF to the Mele I7 devicetree: bindings: Add vendor prefix for Shenzhen Xunlong Software ARM: dts: sun8i-h3: orange-pi-pc: Enable audio codec ...
2017-02-07Merge tag 'socfpga_dts_for_v4.11_part_2' of ↵Arnd Bergmann2-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt Pull "SoCFPGA DTS updates for v4.11, part 2" from Dinh Nguyen: - Add AXI configuration for DWMAC ethernet controllers on Arria10 - Use watchdog1 instead of watchdog0 on Arria10 * tag 'socfpga_dts_for_v4.11_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: Add EMAC AXI settings for Arria10 ARM: dts: watchdog0 cannot reliably trigger reset
2017-02-07Merge tag 'samsung-dt-4.11-3' of ↵Arnd Bergmann5-0/+17
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Samsung DeviceTree update for v4.11, third round" from Krzysztof Kozlowski 1. Add descriptive user-friendly label names for power domains. This makes debugging easier. * tag 'samsung-dt-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add labels to all existing power domains
2017-02-07Merge tag 'ux500-dt-1' of ↵Arnd Bergmann5-14/+26
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt Pull "Ux500 Device Tree updates for v4.11" from Linus Walleij: This cleans the device tree a bit and rectifies some clocking bugs. They are in a sense regressions, but there is no hurry for this platform. * tag 'ux500-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: add the AB8500 sysclk to the device trees ARM: dts: Ux500: move USB PHY pins to PHY device ARM: dts: push MMC/SD to board and add comments
2017-02-07Merge tag 'stm32-dt-for-v4.11-2' of ↵Arnd Bergmann4-43/+388
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt Pull "STM32 DT updates for v4.11, round 2" from Alexandre Torgue: Highlights: ---------- - ADD Timers support on STM32F429 MCU - Enable PWM1 & PWM3 on STM32F469 Disco board - Fix STM32F4_X_CLOCK macro - Use STM32F4_X_CLOCK macro in STM32 device tree - Add I2C1 support for STM32F429 MCU - Enable I2C1 on STM32F429 eval board * tag 'stm32-dt-for-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU
2017-02-07Merge tag 'mvebu-dt-4.11-3' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann8-0/+788
Merge "mvebu dt for 4.11 (part 3)" from Gregory CLEMENT: Add support for Marvell switches with integrated CPUs based on Armada XP * tag 'mvebu-dt-4.11-3' of git://git.infradead.org/linux-mvebu: ARM: dts: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards ARM: dts: mvebu: Add device tree for 98DX3236 SoCs
2017-02-07ARM: DTS: Fix register map for virt-capable GICMarc Zyngier37-43/+43
Since everybody copied my own mistake from the DT binding example, let's address all the offenders in one swift go. Most of them got the CPU interface size wrong (4kB, while it should be 8kB), except for both keystone platforms which got the control interface wrong (4kB instead of 8kB). In a few cases where I knew for sure what implementation was used, I've added the "arm,gic-400" compatible string. I'm 99% sure that this is what everyone is using, but short of having the TRM for all the other SoCs, I've left them alone. Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-07dt-bindings: arm,gic: Fix binding example for a virt-capable GICMarc Zyngier1-1/+1
The joys of copy/paste: the example of a virtualization capable GIC in the DT binding was wrong, and propagated to dozens of platforms. By having a GICC region that is only 4kB (instead of 8kB), we end-up not being able to access the GICC_DIR register which is on the second page. Oh well. Let's fix the source of the crap before tackling individual offenders. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-06ARM: dts: sun8i: sinlinx: Enable audio nodesMylène Josserand1-0/+12
Enable the audio codec and the audio dai for the sun8i A33 sinlinx board. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-06ARM: dts: sun8i: parrot: Enable audio nodesMylène Josserand1-0/+12
Enable the audio codec and the audio dai for the sun8i R16 Parrot board. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-06ARM: dts: sun8i: Add audio codec, dai and card for A33Mylène Josserand1-0/+45
Add the audio codec, dai and a simple card to be able to use the audio stream of the builtin codec on sun8i SoC. This commit adds also an audio-routing for the sound card node to link the analog DAPM widgets (Right/Left DAC) and the digital one's as they are created in different drivers. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-03ARM: dts: Add EMAC AXI settings for Arria10Thor Thayer1-0/+9
Add the device tree entries needed to support the EMAC AXI bus settings on the Arria10 SoCFPGA chip. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2017-02-02ARM: sun8i: dt: Add mali nodeMaxime Ripard1-0/+26
The A23 and A33 have an ARM Mali 400 GPU. Now that we have a binding, add it to our DT. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-02dt-bindings: gpu: Add Mali Utgard bindingsMaxime Ripard1-0/+81
The ARM Mali Utgard GPU family is embedded into a number of SoCs from Allwinner, Amlogic, Mediatek or Rockchip. Add a binding for the GPU of that family. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-02-01ARM: dts: stm32: Add I2C1 support for STM32429 eval boardM'boumba Cedric Madianga1-0/+6
This patch adds I2C1 instance support for STM32x9I-Eval board. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-02-01ARM: dts: stm32: Add I2C1 support for STM32F429 SoCM'boumba Cedric Madianga1-0/+22
This patch adds I2C1 support for STM32F429 SoC Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-02-01ARM: dts: stm32: Use clock DT binding definition on stm32f429 familyGabriel Fernandez2-50/+54
This patch uses clock DT binding definition instead numerical values for stm32f429 board. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-02-01dt-bindings: mfd: stm32f4: Add missing binding definitionGabriel Fernandez1-2/+12
This patch adds missing binding definition (backupram, ethernet, otg, qspi, adc & dsi) Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-02-01dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macroGabriel Fernandez1-5/+5
Macro to select a clock was not correct. Offset of enable register starts at 0x30, then calculation to select a bit is: (@enable_reg - 0x30) / 4 * 32 + bit_to_select Tested-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-02-01ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-discoBenjamin Gaignard1-0/+28
Define and enable pwm1 and pwm3 for stm32f469 discovery board Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-02-01ARM: dts: stm32: add Timers driver for stm32f429 MCUBenjamin Gaignard1-0/+275
Add Timers and it sub-nodes into DT for stm32f429 family. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-02-01ARM: dts: add the AB8500 sysclk to the device treesLinus Walleij3-0/+6
This clock has been missing since some early stages of device tree conversion. Adding the right clocks to the device tree makes USB work again. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01ARM: dts: Ux500: move USB PHY pins to PHY deviceLinus Walleij2-12/+12
The physical pins from the SoC are in a sense belonging to the PHY device (AB8500 USB) rather than the MUSB USB IP block. The driver definately assumes so: before this change it complains that it cannot control the pins it is using: abx5x0-usb ab8500-usb.0: could not get/set default pinstate After this patch the warning goes away. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01ARM: dts: push MMC/SD to board and add commentsLinus Walleij4-2/+8
This moves the enable-active-high setting from the SoC to the board for the VMMCQ regulators. It should at least be in the vicinity of the GPIO line it is defined for. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-31ARM: dts: exynos: Add labels to all existing power domainsMarek Szyprowski5-0/+17
Provide human readable names for all power domains defined in Exynos SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-31ARM: dts: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boardsChris Packham3-0/+295
These boards are Marvell's evaluation boards for the 98DX4251 and 98DX3336 SoCs. [gregory.clement@free-electrons.com: fix topic and update Makefile] Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-01-31ARM: dts: mvebu: Add device tree for 98DX3236 SoCsChris Packham5-0/+493
The Marvell 98DX3236, 98DX3336, 98DX4521 and variants are switch ASICs with integrated CPUs. They are similar to the Armada XP SoCs but have different I/O interfaces. [gregory.clement@free-electrons.com: fix topic] Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-01-31Merge tag 'stm32-dt-for-v4.11-1-v2' of ↵Olof Johansson0-0/+0
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt STM32 DT updates for v4.11, round 1 Version 2. Highlights: ---------- - ADD RTC support on STM32F429 MCU - Enable RTC on STM32F469and STM32F429 boards - ADD ADC support on STM32F429 MCU - Enable ADC on STM32F429 Eval board - Add I2S external clock - Fix memory size for STM32F429 Disco * tag 'stm32-dt-for-v4.11-1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: enable RTC on stm32429i-eval ARM: dts: stm32: enable RTC on stm32f469-disco ARM: dts: stm32: enable RTC on stm32f429-disco ARM: dts: stm32: Add RTC support for STM32F429 MCU ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429 ARM: dts: stm32: Include auxiliary stm32fx clock definition ARM: dts: stm32: Add external I2S clock on stm32f429 MCU ARM: dts: stm32: enable ADC on stm32f429i-eval board ARM: dts: stm32: Add ADC support to stm32f429 ARM: dts: stm32: Add missing USART3 pin config to stm32f469-disco board ARM: dts: stm32: Fix memory size from 8MB to 16MB on stm32f469-disco board clk: stm32f4: Update DT bindings documentation Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'samsung-dt-4.11-2' of ↵Olof Johansson2-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DeviceTree update for v4.11, second round: 1. Use bigger reserved memory region for Multi Format Codec on all Exynos chipsets so it could decode FullHD easily. * tag 'samsung-dt-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Fix indentation of EHCI and OHCI ports ARM: dts: exynos: Increase MFC left reserved memory region size Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'imx-dt-4.11' of ↵Olof Johansson132-920/+3870
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt i.MX device tree updates for 4.11: - New board support: vf610-zii-dev-rev-c, imx6ul-opos6uldev, imx6ul-isiot, imx6qdl-savageboard, imx6q-mccmon6. - A patch from Alexandre to correct the mangled license text which has been copied & pasted all over the i.MX device tree files. - Update cpu nodes of some i.MX SoCs to make them consistent and match ePAPR spec. - Add OCOTP device for i.MX6UL SoC. - Add security violation interrupt for i.MX25 DryIce. - Enable USB OTG, WIFI and Bluetooth support for i.MX6SX Udoo Neo board. - Enable S/PDIF and 2nd display pipeline support for CompuLab board.. - Add SPI and LTC3676 PMIC support for Gateworks Ventana boards. - A few random device addition for various boards: TVE DAC regulators for imx53-qsb, EEPROM for vf610-zii-dev, eMMC and NAND support for i.MX6UL Engicam boards. - Cleanups on obsoleted or unused properties. * tag 'imx-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits) ARM: dts: udoo_neo: Add Bluetooth support ARM: dts: udoo_neo: Add Wifi support ARM: dts: udoo_neo: Add UDOO Neo USB OTG1 and OTG2 support ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL NAND initial support ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC initial support ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible" ARM: dts: vf610-zii-dev: add EEPROM entry to Rev C ARM: dts: add Armadeus Systems OPOS6UL and OPOS6ULDEV support ARM: dts: imx6q-utilite-pro: enable 2nd display pipeline ARM: dts: vf610-zii-dev: Add .dts file for rev. C ARM: dts: vf610-zii-dev-rev-b: Remove leftover PWM pingroup ARM: dts: imx6: Support Savageboard quad ARM: dts: imx6: Support Savageboard dual ARM: dts: imx6: Add Savageboard common file ARM: dts: imx53-qsb: Provide the TVE DAC regulators ARM: dts: imx6q: Add mccmon6 board support Doc: devicetree: bindings: Add vendor prefix entry - lwn ARM: dts: imx/vf: Correct license text ARM: dts: imx25.dtsi: DryIce security violation interrupt ARM: dts: imx: Add ocotp node for imx6ul ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'imx-fixes-nc-4.11' of ↵Olof Johansson9-104/+116
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt i.MX non-critical device tree fixes for 4.11: - A couple of fixes on anatop regulator voltage and constraints according to hardware datasheet. - Correct FEC interrupt routing for i.MX6QP which has got the hardware bug found on i.MX6Q fixed. - Remove unit address from i.MX6 LDB device node to fix DTC warning. - A fix on imx53-qsb board FEC pinmux config to remove the dependency on firmware for setting up pins. - A series from Sascha to fix LPSR pins for i.MX7 boards. * tag 'imx-fixes-nc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx53-qsb-common: fix FEC pinmux config ARM: imx6: remove unit address from LDB node ARM: imx6qp: adapt DT to changed FEC interrupts ARM: imx6: fix regulator constraints on anatop 1p1 and 2p5 ARM: imx6: fix min/max voltage of anatop 2p5 regulator ARM: dts: imx7: Add "LPSR" to LPSR iomux pin names ARM: dts: imx7d-cl-som: Fix OTG power pinctrl ARM: dts: imx7d-sdb: Fix watchdog and pwm pinmux ARM: dts: imx7s-warp: Fix watchdog pinmux Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson10-6/+419
mvebu dt for 4.11 (part 2) Switch device tree files to the new DSA binding * tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding ARM: dts: kirkwood-dir665: Utilize new DSA binding ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding ARM: dts: armada-388-clearfog: Utilize new DSA binding ARM: dts: armada-385-linksys: Utilize new DSA binding ARM: dts: armada-370-rd: Utilize new DSA binding Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge branch 'sti-dt-for-v4.11-round2' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt * 'sti-dt-for-v4.11-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: STiH407-family: Add missing pwm irq Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'tegra-for-4.11-arm-dt' of ↵Olof Johansson7-66/+66
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt ARM: tegra: Device tree changes for v4.11-rc1 This contains a set of patches that add hardware compatibility for newer revisions of the Toradex Apalis TK1. Also included is a fix to the PAZ00 that stabilizes panel initialization on boot as well as a patch to add card detection for the µSD card slot on TrimSlice. To round things off there are a couple of fixes and changes to the Nyan device tree files to fix the battery charger, add compatibility with new revisions of Nyan Blaze and Nyan Big, as well as properly support the TPM. * tag 'tegra-for-4.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: nyan-blaze: Proper pinmux for TPM I2C ARM: tegra: nyan-big: Proper pinmux for TPM I2C ARM: tegra: nyan-blaze: Include compatible revisions for proper detection ARM: tegra: nyan-big: Include compatible revisions for proper detection ARM: tegra: nyan: Use external control for bq24735 charger ARM: tegra: nyan: Use proper IRQ type definitions ARM: dts: tegra: Fix missing card detection in Trimslice µSD card slot ARM: tegra: paz00: Mark panel regulator as enabled on boot ARM: tegra: apalis-tk1: Update compatibility comment ARM: tegra: apalis-tk1: Fix SD card detect on v1.1 HW ARM: tegra: apalis-tk1: Adjust pin muxing for v1.1 HW ARM: tegra: apalis-tk1: Optional DisplayPort hot-plug detect ARM: tegra: apalis-tk1: Pull-up temperature alert Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'at91-ab-4.11-dt2' of ↵Olof Johansson2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt DT for 4.11 #2: - Enable the DMA on sama5d2 and sama5d4 xplained to fix an issue seen by kernelci * tag 'at91-ab-4.11-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: Enable DMA on sama5d2_xplained console ARM: dts: at91: Enable DMA on sama5d4_xplained console Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'renesas-dt2-for-v4.11' of ↵Olof Johansson7-0/+51
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.11 Enhancements: - Add power-domains to mmcif on r7s72100 SoC - Add OSTM to rskrza1/r7s72100 - Link ARM GIC to clock and clock domain on r8a774[35] SoCs Clean-up: - Correct SATA device status on r8a7779/marzen * tag 'renesas-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r7s72100: add power-domains to mmcif ARM: dts: rskrza1: add ostm DT support ARM: dts: r7s72100: add ostm to device tree ARM: dts: r7s72100: add ostm clock to device tree ARM: dts: r8a7745: Link ARM GIC to clock and clock domain ARM: dts: r8a7743: Link ARM GIC to clock and clock domain ARM: dts: r8a7779, marzen: Fix sata device status Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'v4.10-next-dts32' of https://github.com/mbgg/linux-mediatek into ↵Olof Johansson4-20/+285
next/dt Lots of updates for mt2701: Rearrange the dt nodes and fix unit address for pincontroler Add nodes for: - clock controller subsystems - scpsys controller - iommu and smi - spi - nand - auxadc - thermal controller and zones Email address updated for mt7623 devicetree files. * tag 'v4.10-next-dts32' of https://github.com/mbgg/linux-mediatek: arm: dts: mt2701: Add thermal device node. arm: dts: mt2701: Add auxadc device node. arm: dts: mt2701: Add nand device node arm: dts: mt2701: Add spi device node ARM: dts: mt2701: add iommu/smi dtsi node for mt2701 ARM: dts: mediatek: update my email address arm: dts: mt2701: Add power domain controller device node arm: dts: mt2701: Add subsystem clock controller device nodes arm: dts: mt2701: Sort DT nodes by register address Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'omap-for-v4.11/dt-signed-v2' of ↵Olof Johansson34-545/+759
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omaps for v4.11 merge window. These changes add earlycon stdout-path propety for the SoCs so far tested with it. The other changes are addition of BeagleBone green and making WLAN work on BeagleBone black wireless and green wireless. The rest of the changes are the usual enabling features on various devices: - Enable devices on am335x-sl50 - Changes to dra7-evm boards to enable enable irqs for dp83867 eth phys, add pinmux configuration for mmc, remov erratum i869 pinmux configurations, disable NAND support because of pin conflict, add pcf8575 used for lcd - Remove NAND partition table for omap3-igep - Configure USB Ethernet MAC from device tree for beagleboard xm, pandaboard, omap5-uevm and igepv5 - Configure am335x-chilisom to wake from RTC-only state - Update Nanobone for external FRAM chip - Clean up n900 dts - Update am335x-phycore and am335x-wega for various devices - Changes for am57xx-beagle-x15 to implement rgmii2 errata * tag 'omap-for-v4.11/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (35 commits) ARM: dts: dra72/1-evm: add pcf8575 used for lcd ARM: dts: dra7xx: Add stdout-path property ARM: dts: am57xx: Add stdout-path property ARM: dts: am43xx: Add stdout-path property ARM: dts: am33xx: Add stdout-path property ARM: dts: am335x-sl50: Enable the Ambient Light Sensor. ARM: dts: am335x-sl50: Enable the MCP23017 GPIO Expander. ARM: dts: am335x-sl50: Enable BQ32000 Real Time Clock. ARM: dts: am335x-sl50: Enable SPI0 interface and Flash Memory. ARM: dts: am335x-sl50: Enable UART1. ARM: dts: am335x-sl50: Remove I2C1 node. ARM: dts: omap3-igep: Remove NAND partition table ARM: dts: am57xx-beagle-x15: implement errata "Ethernet RGMII2 Limited to 10/100 Mbps" ARM: dts: am335x-phycore-som: Remove partition tables ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys ARM: dts: Configure BeagleBone peripheral USB VBUS irq ARM: dts: omap5-igep0050: Allow bootloader to configure USB Ethernet MAC ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC ARM: dts: pandaboard: Allow bootloader to configure USB Ethernet MAC ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'davinci-for-v4.11/dt' of ↵Olof Johansson8-6/+468
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt Device tree updates for DaVinci DA850 * GPIO keys on DA850 LCDK * LCDC display on DA850 LCDK * USB OHCI on DA850 LCDK * VPIF (video input) on DA850 LCDK * Add a DA8xx specific compatible for UARTs * Introduce support for Lego Mindstorms EV3 * tag 'davinci-for-v4.11/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: Add LEGO MINDSTORMS EV3 dts dt-bindings: add "microchip,24c128" compatible string dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification dt-bindings: Add vendor prefix for LEGO ARM: dts: da850: Add ti,da830-uart compatible for serial ports ARM: dts: davinci: da850-lcdk: enable VPIF ARM: dts: davinci: da850-evm: enable VPIF ARM: dts: davinci: da850: VPIF: add node and muxing ARM: dts: da850-lcdk: Enable ohci for omapl138 lcdk ARM: dts: da850: Add usb device node ARM: dts: da850: specify the maximum pixel clock rate for tilcdc ARM: dts: da850-lcdk: add the vga-bridge node ARM: dts: da850: rename the display node label ARM: dts: da850-lcdk: add gpio-keys Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'qcom-dts-for-4.11' of ↵Olof Johansson11-47/+559
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm Device Tree Changes for v4.11 * Add Coresight components for APQ8064 * Fixup PM8058 nodes * Add APQ8060 gyro and accel support * Enable SD600 HDMI support * Add RIVA supprort for Sony Yuga and SD600 * Add PM8821 support * Add MSM8974 ADSP, USB gadget, SMD, and SMP2P support * Fix IPQ8064 clock frequencies * tag 'qcom-dts-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom: Add apq8064 CoreSight components ARM: dts: Add gyro and accel to APQ8060 Dragonboard ARM: dts: reference PM8058 as IRQ parent ARM: dts: rename MSM8660/APQ8060 pmicintc to pm8058 ARM: dts: sd-600eval: enable 1.8v regulator on LS expansion ARM: dts: sd-600eval: add hdmi support ARM: dts: move hdmi pinctrl out of board file. ARM: dts: qcom: sd600eval: Enable riva-pil ARM: dts: qcom: sd600-eval: pm8921_s2 regulator properties ARM: dts: qcom: apq8064-sony-yuga: Enable riva-pil ARM: dts: qcom: apq8064: Add riva-pil node ARM: dts: apq8064: add support to pm8821 arm: dts: qcom: Fix ipq board clock rates ARM: dts: msm8974: Remove "unused" reserved region ARM: dts: msm8974: Add ADSP PIL node ARM: dts: msm8974: Add ADSP smp2p and smd nodes ARM: dts: qcom: msm8974: Add USB gadget nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'uniphier-dt-v4.11' of ↵Olof Johansson1-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt UniPhier ARM SoC DT updates for v4.11 - Add eMMC, SD pin-mux nodes * tag 'uniphier-dt-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: add SD pin-mux node ARM: dts: uniphier: add eMMC pin-mux node Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'keystone_dts_for_4.11' of ↵Olof Johansson8-8/+113
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt ARM: Keystone DTS update for 4.11 Brief: - MSM RAM node support for the Keystone 2 SOCs. - PSC node & reset controller node support for keystone 2 SOCs. - da830 UART node support. * tag 'keystone_dts_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-k2e: Add PSC reset controller node ARM: dts: keystone-k2l: Add PSC reset controller node ARM: dts: keystone-k2hk: Add PSC reset controller node ARM: dts: keystone: Add PSC node ARM: keystone: dts: fix netcp clocks and add names ARM: dts: keystone-k2g: Reserve MSM RAM for boot monitor ARM: dts: keystone-k2e: Reserve MSM RAM for boot monitor ARM: dts: keystone-k2l: Reserve MSM RAM for boot monitor ARM: dts: keystone-k2hk: Reserve MSM RAM for boot monitor ARM: dts: keystone-k2g: Add MSM RAM node ARM: dts: keystone-k2e: Add MSM RAM node ARM: dts: keystone-k2l: Add MSM RAM node ARM: dts: keystone-k2hk: Add MSM RAM node ARM: dts: keystone: Add "ti,da830-uart" compatible string Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'v4.11-rockchip-dts32-1' of ↵Olof Johansson37-160/+252
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Bit of cleanup for the cortex-a9 uarts to have that soc-specific spare-compatible as all others have, conversion to gpio constants and addition of rk3288 qos nodes that need to be saved before a power-domain gets turned off. * tag 'v4.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add soc-specific uart compatibles for rk3066/rk3188 ARM: dts: rockchip: use pin constants to describe gpios ARM: dts: rockchip: add qos node for rk3288 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29ARM: dts: exynos: Fix indentation of EHCI and OHCI portsKrzysztof Kozlowski1-12/+12
Replace spaces with tabs in EHCI and OHCI ports indentation. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2017-01-29ARM: dts: imx53-qsb-common: fix FEC pinmux configPatrick Bruenn1-10/+10
The pinmux configuration in device tree was different from manual muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the bootloader already did the correct pinmuxing for us. But recently u-boot is migrating to reuse device tree files from the kernel tree, so it seems to be better to have the correct pinmuxing in our files, too. Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: dts: udoo_neo: Add Bluetooth supportBreno Lima1-0/+32
Udoo Neo has a TI WL1831 Bluetooth chip connected to the UART3 port. Add support for it. Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: dts: udoo_neo: Add Wifi supportBreno Lima1-0/+45
Udoo Neo has a TI WL1831 Wifi chip connected to the USDHC3 port. Add support for it. Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: dts: udoo_neo: Add UDOO Neo USB OTG1 and OTG2 supportBreno Lima1-0/+59
Add support for micro USB (OTG1) and USB Host (OTG2) for UDOO Neo board. Tested on a UDOO Neo Full board by mounting a mass storage device on both ports. Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: imx6: remove unit address from LDB nodeLucas Stach1-1/+1
The LDB has no reg property as it uses the IOMUX-GPR syscon to access its registers. Remove the unit address from the DT node to make DT compiler happy. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-28 21:36:59 +0300