| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Touchpad LED will not turn on after S3, it will make the touchpad status
doesn't consist with the LED.
By adding one flag to let the LED device restore it's status.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Trivial platform driver for Traverse Technologies Geos and Geos2
single-board computers. Uses SMBIOS to identify platform.
Based on progressive revisions of the leds-net5501 driver that
was rewritten by Ed Wildgoose as a platform driver.
Supports GPIO-based LEDs (3) and 1 polled button which is
typically used for a soft reset.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Ed Wildgoose <ed@wildgooses.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
This doesn't change how the code works, but it silences a Sparse
complaint:
drivers/platform/x86/toshiba_acpi.c:121:37: error: dubious one-bit signed bitfield
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
The "wmi_interface *iface" is a useless input argument for internal wmi get/set
functions, remove it to clear up source code.
Tested on Lenovo E520.
Tested on Acer TravelMate 4750.
Tested-by: mr.kobzar <mr.kobzar@gmail.com>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
This will let the MSIC driver to create platform device for the thermal
driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Instead of complaining that the voltage is on, we can just ask the MSIC to
turn the voltage off. This should save some power.
Voltage for thermistors is turned on when ADC conversion is initiated.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Intel MSIC MFD driver provides common register access interface to the
devices in the MSIC die so we use that instead of SCU IPC.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
In newer boards this device is called "msic_thermal" instead of
"msic_sensor". To support both we add suitable alias for the driver.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
asus_acpi only support old models, it has been deprecated since
2009 in favor of asus-laptop, it's not built by any (sane) distro,
so it is time to say good bye.
Thanks to Julien Lerouge and Karol Kozimor for the work they have
done on it, I would never have wrote asus-laptop and other asus
related drivers without asus_acpi.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
But don't try to do than on pegatron tablets to avoid any
conflict.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Let the user tells if BLED and WLED should be exposed as led or
rfkill (the old sysfs are still here, but this adds a standard
interface to control the device).
For example on my A6JC, with WAPF=1, I would do:
$ modprobe asus-laptop wled_type=led bluetooth_type=rfkill
There is still no known way to automatically guess what BLED
and WLED methods will control, it's why user information is needed.
A userspace database could do that automatically, and maybe some DMI
matching in the driver.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Use pr_warn not pr_warning.
Coalesce formats.
Argument aligning.
Remove superfluous parentheses.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Use pr_warn not pr_warning.
Coalesce formats.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
- don't output error when probing features at load
- print the SABI signature if samsung_sabi_init()
succeed
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
We still need to figure out exactly what each of different fields
represent, but they contain at least model and version informations.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
This enable the driver for everything that look like
a laptop and is from vendor "SAMSUNG ELECTRONICS CO., LTD.".
Note that laptop supported by samsung-q10 seem to have a different
vendor strict.
Also remove every log output until we know that we have a SABI interface
(except if the driver is forced to load, or debug is enabled).
Keeping a whitelist of laptop with a model granularity is something that can't
work without close vendor cooperation (and we don't have that).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
The wireless status get and get commands seems to use one
byte per device. First byte is for wlan and third is for bluetooh,
we will have to find what the other are for.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
We can now do the self test using debugfs, so remove the code
and keep the debug flag to enable more traces.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
This allow to call arbitrary sabi commands wihout
modifying the driver at all. For example, setting
the keyboard backlight brightness to 5 using debugfs
interface can be done like that:
; Set the command
echo 0x78 > command
; Set the data
echo 0x0582 > d0
; Fill the rest with 0
echo 0 > d1
echo 0 > d2
echo 0 > d3
; And issue the command
cat call
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
* SABI command are on 16 bits, not 8
* SABI can read/write up to 11 byte of data
* There is not real difference between "get" and "set"
commands, so refactorise the code of both functions
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Will be usefull later when we will have more platform sysfs files
like battery_life_extender or usb_charge.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
samsung-laptop is not at all related to ACPI, but since this interface
is not documented at all, and the driver has to use it at load to
understand how it works on the laptop, I think it's a good idea to
disable it if a better solution is available.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Create _init()/_exit() function for each subsystem, remove
the local struct samsung_laptop * and only keep a
struct platform_device * that can only be used in samsung_init()
and samsung_exit().
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Even if this driver can only be loaded once, it is still a good
idea to create some kind of context structure.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
module_platform_driver()
This patch converts the drivers in drivers/platform/x86/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Cc: Hong Liu <hong.liu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Turn off the following triggered with gcc 4.6.1 on Debian testing:
drivers/platform/x86/hdaps.c: In function ‘hdaps_temp2_show’:
drivers/platform/x86/hdaps.c:398:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized]
drivers/platform/x86/hdaps.c: In function ‘hdaps_temp1_show’:
drivers/platform/x86/hdaps.c:385:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized]
Cc: Frank Seidel <frank@f-seidel.de>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Add "Vostro 3555", "Inspiron N311z", and "Inspiron M5110" into quirks,
so that they could have touchpad LED function work.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Fix scancodes returned by driver to match scancodes used to remap keys.
(Before the patch FN/E returned scancode 0x1B, but to remap scancode
0x14 had to be used).
The scancodes returned by the sony-laptop driver for function keys did not
match the scancodes used to remap keys. Also, since the scancode was sent
to the input subsystem after the mapped keysym the /lib/udev/keymap
utility was confused about which scancode to report for which keysym.
This patch fixes the driver so the correct scancode is shown for each
key. It also adds to the documentation a description of where to find
the scancodes.
Signed-off-by: John Hughes <john@calva.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
All the production devices use the PC compatible version of this device so
don't use the SCU interfaces or the SCU firmware interfaces.
Delete lots of code and conditional paths
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
When the keyboard backlight support was originally added, the commit said
to default it to on with a 10 second timeout. That actually wasn't the
case, as the default value is commented out for the kbd_backlight parameter.
Because it is a static variable, it gets set to 0 by default without some
other form of initialization.
However, it seems the function to set the value wasn't actually called
immediately, so whatever state the keyboard was in initially would remain.
Then commit df410d522410e67660 was introduced during the 2.6.39 timeframe to
immediately set whatever value was present (as well as attempt to
restore/reset the state on module removal or resume). That seems to have
now forced the light off immediately when the module is loaded unless
the option kbd_backlight=1 is specified.
Let's enable it by default again (for the first time). This should solve
https://bugzilla.redhat.com/show_bug.cgi?id=728478
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Acked-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
|
|
|
|
Commit 28d82dc1c4ed ("epoll: limit paths") that I did to limit the
number of possible wakeup paths in epoll is causing a few applications
to longer work (dovecot for one).
The original patch is really about limiting the amount of epoll nesting
(since epoll fds can be attached to other fds). Thus, we probably can
allow an unlimited number of paths of depth 1. My current patch limits
it at 1000. And enforce the limits on paths that have a greater depth.
This is captured in: https://bugzilla.redhat.com/show_bug.cgi?id=681578
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking changes from David Miller:
"1) icmp6_dst_alloc() returns NULL instead of ERR_PTR() leading to
crashes, particularly during shutdown. Reported by Dave Jones and
fixed by Eric Dumazet.
2) hyperv and wimax/i2400m return NETDEV_TX_BUSY when they have
already freed the SKB, which causes crashes as to the caller this
means requeue the packet. Fixes from Eric Dumazet.
3) usbnet driver doesn't allocate the right amount of headroom on
fresh RX SKBs, fix from Eric Dumazet.
4) Fix regression in ip6_mc_find_dev_rcu(), as an RCU lookup it
abolutely should not take a reference to 'dev', this leads to
leaks. Fix from RonQing Li.
5) Fix netfilter ctnetlink race between delete and timeout expiration.
From Pablo Neira Ayuso.
6) Revert SFQ change which causes regressions, specifically queueing
to tail can lead to unavoidable flow starvation. From Eric
Dumazet.
7) Fix a memory leak and a crash on corrupt firmware files in bnx2x,
from Michal Schmidt."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netfilter: ctnetlink: fix race between delete and timeout expiration
ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
wimax/i2400m: fix erroneous NETDEV_TX_BUSY use
net/hyperv: fix erroneous NETDEV_TX_BUSY use
net/usbnet: reserve headroom on rx skbs
bnx2x: fix memory leak in bnx2x_init_firmware()
bnx2x: fix a crash on corrupt firmware file
sch_sfq: revert dont put new flow at the end of flows
ipv6: fix icmp6_dst_alloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools, x86: Build perf on older user-space as well
perf tools: Use scnprintf where applicable
perf tools: Incorrect use of snprintf results in SEGV
|
|
Kerin Millar reported hardlockups while running `conntrackd -c'
in a busy firewall. That system (with several processors) was
acting as backup in a primary-backup setup.
After several tries, I found a race condition between the deletion
operation of ctnetlink and timeout expiration. This patch fixes
this problem.
Tested-by: Kerin Millar <kerframil@gmail.com>
Reported-by: Kerin Millar <kerframil@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
