summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-12-14i2c: uniphier: error out if bus speed is zeroMasahiro Yamada1-0/+5
There is code to divide by "bus_speed" some lines below. To eliminate the possibility of division by zero, bail out if "clock-frequency" is specified as zero. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: uniphier: error out if clock rate is zeroMasahiro Yamada1-1/+5
This input clock is used to generate the sampling clock for I2C bus. If the clock rate is zero, there is something wrong with the clock driver. Bail out with the appropriate error message in such a case. It would make it easier to find the root cause of failure. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: rcar: honor additional i2c timings from DTWolfram Sang2-9/+16
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: rcar: switch to i2c generic dt parsingWolfram Sang1-7/+9
Switch to the new generic functions. Plain convert, no functionality added yet. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: rcar: refactor probe function a littleWolfram Sang1-23/+17
The probe function is a little bit messy, something here, something there. Rework it so that there is some order: first init the private structure, then the adapter, then do HW init. This also allows us to remove the device argument of the clock calculation function, because it now can be deduced from the private structure. Also, shorten some lines where possible. This is a preparation for further refactoring. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: add generic routine to parse DT for timing informationWolfram Sang2-0/+71
Inspired from the i2c-rk3x driver (thanks guys!) but refactored and extended. See built-in docs for further information. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-14i2c: document generic DT bindings for timing parametersWolfram Sang1-5/+26
Also, sort the properties alphabetically and make indentation consistent. Wording largely taken from i2c-rk3x.txt, thanks guys! Only "i2c-scl-internal-delay-ns" is new, the rest is used by two drivers already and was documented in their driver binding documentation. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-05i2c: emev2: add slave supportNiklas Söderlund1-1/+111
Add I2C slave provider using the generic slave interface. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-04i2c: eg20t: allow build on MIPS platformsPaul Burton1-1/+1
Allow the eg20t I2C driver to be built for MIPS platforms, in preparation for use on the MIPS Boston board. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-04i2c: eg20t: set i2c_adapter->dev.of_nodePaul Burton1-0/+1
Set the I2C adapter devices of_node to that of the PCI device, such that I2C clients may be instantiated via device tree. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-03i2c: at91: add support for the HOLD fieldLudovic Desroches2-4/+54
The hold field allows to configure the data hold time which can be set with the help of the generic binding 'i2c-sda-hold-time-ns'. This feature has been introduced with SAMA5D4 SoC family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-12-03i2c: piix4: remove unneeded assignmentsWolfram Sang1-2/+2
smatch rightfully says: drivers/i2c/busses/i2c-piix4.c:504 piix4_access warn: unused return: i = inb_p() drivers/i2c/busses/i2c-piix4.c:537 piix4_access warn: unused return: i = inb_p() Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Christian Fetzer <fetzer.ch@gmail.com>
2015-12-01i2c: mediatek: add i2c first write then read optimizationLiguo Zhang1-6/+27
For platform with auto restart support, between every transfer, i2c controller will trigger an interrupt and SW need to handle it to start new transfer. When doing write-then-read transfer, instead of restart mechanism, using WRRD mode to have controller send both transfer in one request to reduce latency. Signed-off-by: Liguo Zhang <liguo.zhang@mediatek.com> Reviewed-by: Eddie Huang <eddie.huang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: cadence: Remove the suspended flagShubhrajyoti Datta1-6/+1
The suspended flag is a flag holding the device's PM status. The runtime framework does that for us. Use pm_runtime_suspended call instead. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: cadence: Move to sensible power managementShubhrajyoti Datta1-21/+45
Currently the clocks are enabled at probe and disabled at remove. Which keeps the clocks enabled even if no transaction is going on. This patch enables the clocks at the start of transfer and disables after it. Also adapts to runtime pm. converts dev pm to const to silence a checkpatch warning. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: add i2c_check_quirks helper functionNicola Corna1-0/+14
This patch adds a i2c_check_quirks helper function to check the quirk flags of an i2c adapter, in a similar way to i2c_check_functionality. Signed-off-by: Nicola Corna <nicola@corna.info> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: bcm2835: add I2C_AQ_NO_CLK_STRETCHNicola Corna1-0/+10
As reported in the links given below. the BCM2835 has a hardware bug in its i2c module which prevents a correct clock stretching. This patch adds the I2C_AQ_NO_CLK_STRETCH quirk flag to i2c-bcm2835. Signed-off-by: Nicola Corna <nicola@corna.info> [wsa: put the links into the code as comments] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: algo-bit: add I2C_AQ_NO_CLK_STRETCHNicola Corna1-0/+6
Add I2C_AQ_NO_CLK_STRETCH to drivers/i2c/algos/i2c-algo-bit.c when getscl is not available. Signed-off-by: Nicola Corna <nicola@corna.info> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: add i2c quirk flag for unsupported clock stretchingNicola Corna1-0/+2
Add I2C_AQ_NO_CLK_STRETCH quirk flag, to be used when clock stretching is not supported. Signed-off-by: Nicola Corna <nicola@corna.info> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: xiic: Replace spinlock with mutexLars-Peter Clausen1-6/+6
All protected sections are only called from sleep-able context, so there is no need to use a spinlock. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: taos-evm: replace simple_strtoul by kstrtou8LABBE Corentin1-1/+7
The simple_strtoul function is marked as obsolete. This patch replace it by kstrtou8. Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: piix4: Add adapter port name support for SB800 chipsetChristian Fetzer1-4/+12
This patch adds support for port names for the SB800 chipset. Since the chipset supports a multiplexed main SMBus controller, adding the channel name to the adapter name is necessary to differentiate the ports better (for example in sensors output). Signed-off-by: Christian Fetzer <fetzer.ch@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: piix4: Add support for multiplexed main adapter in SB800Christian Fetzer1-22/+147
The SB800 chipset supports a multiplexed main SMBus controller with four ports. The multiplexed ports share the same SMBus address and register set. The port is selected by bits 2:1 of the smb_en register (0x2C). Only one port can be active at any point in time therefore a mutex is needed in order to synchronize access. Additionally, the commit avoids requesting and releasing the SMBus base address index region on every multiplexed transfer by moving the request_region call into piix4_probe. Tested on HP ProLiant MicroServer G7 N54L (where this patch adds support to access sensor data from the w83795adg). Cc: Thomas Brandon <tbrandonau@gmail.com> Cc: Eddi De Pieri <eddi@depieri.net> Signed-off-by: Christian Fetzer <fetzer.ch@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: piix4: Convert piix4_main_adapter to arrayChristian Fetzer1-5/+12
The SB800 chipset supports a multiplexed main SMBus controller with four ports. Therefore the static variable piix4_main_adapter is converted into a piix4_main_adapters array that can hold one i2c_adapter for each multiplexed port. The auxiliary adapter remains unchanged since it represents the second (not multiplexed) SMBus controller on the SB800 chipset. Signed-off-by: Christian Fetzer <fetzer.ch@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: rcar: handle difference in setting up non-first messageWolfram Sang1-5/+16
Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: rcar: clean up after refactoringWolfram Sang1-23/+9
Update the comments to match current behaviour. Shorten some comments. Update copyrights. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: rcar: revoke START request earlyWolfram Sang1-16/+7
If we don't clear START generation as soon as possible, it may cause another message to be generated, e.g. when receiving NACK in address phase. To keep the race window as small as possible, we clear it right at the beginning of the interrupt. We don't need any checks since we always want to stop START and STOP generation on the next occasion after we started it. This patch improves the situation but sadly does not completely fix it. It is still to be researched if we can do better given this HW design. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: rcar: check master irqs before slave irqsWolfram Sang1-8/+5
Due to the HW design, master IRQs are timing critical, so give them precedence over slave IRQ. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: rcar: don't issue stop when HW does it automaticallyWolfram Sang1-2/+2
The manual says (55.4.8.6) that HW does automatically send STOP after NACK was received. My measuerments confirm that. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: rcar: init new messages in irqWolfram Sang1-47/+43
Setting up new messages was done in process context while handling a message was in interrupt context. Because of the HW design, this IP core is sensitive to timing, so the context switches were too expensive. Move this setup to interrupt context as well. In my test setup, this fixed the occasional 'data byte sent twice' issue which a number of people have seen. It also fixes to send REP_START after a read message which was wrongly send as a STOP + START sequence before. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: rcar: refactor setup of a msgWolfram Sang1-6/+9
We want to reuse this function later. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: rcar: remove spinlockWolfram Sang1-19/+4
After making sure to reinit the HW and clear interrupts in the timeout case, we know that interrupts are always disabled in the sections protected by the spinlock. Thus, we can simply remove it which is a preparation for further refactoring. While here, rename the timeout variable to time_left which is way more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: rcar: remove unused IOERROR stateWolfram Sang1-6/+0
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: rcar: rework hw initWolfram Sang1-12/+4
We don't need to init HW before every transfer since we know the HW state then. HW init at probe time is enough. While here, add setting the clock register which belongs to init HW. Also, set MDBS bit since not setting it is prohibited according to the manual. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30i2c: rcar: make sure clocks are on when doing clock calculationWolfram Sang1-9/+17
When calculating the bus speed, the clock should be on, of course. Most bootloaders left them on, so this went unnoticed so far. Move the ioremapping out of this clock-enabled-block and prepare for adding hw initialization there, too. Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-11-30Linux 4.4-rc3Linus Torvalds1-1/+1
2015-11-30Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds27-993/+1093
Pull nouveau and radeon fixes from Dave Airlie: "Just some nouveau and radeon/amdgpu fixes. The nouveau fixes look large as the firmware context files are regenerated, but the actual change is quite small" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: make some dpm errors debug only drm/nouveau/volt/pwm/gk104: fix an off-by-one resulting in the voltage not being set drm/nouveau/nvif: allow userspace access to its own client object drm/nouveau/gr/gf100-: fix oops when calling zbc methods drm/nouveau/gr/gf117-: assume no PPC if NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK is zero drm/nouveau/gr/gf117-: read NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK from correct GPC drm/nouveau/gr/gf100-: split out per-gpc address calculation macro drm/nouveau/bios: return actual size of the buffer retrieved via _ROM drm/nouveau/instmem: protect instobj list with a spinlock drm/nouveau/pci: enable c800 magic for some unknown Samsung laptop drm/nouveau/pci: enable c800 magic for Clevo P157SM drm/radeon: make rv770_set_sw_state failures non-fatal drm/amdgpu: move dependency handling out of atomic section v2 drm/amdgpu: optimize scheduler fence handling drm/amdgpu: remove vm->mutex drm/amdgpu: add mutex for ba_va->valids/invalids drm/amdgpu: adapt vce session create interface changes drm/amdgpu: vce use multiple cache surface starting from stoney drm/amdgpu: reset vce trap interrupt flag
2015-11-30Merge tag 'rtc-4.4-2' of ↵Linus Torvalds2-36/+9
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Two fixes for the ds1307 alarm and wakeup" * tag 'rtc-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1307: fix alarm reading at probe time rtc: ds1307: fix kernel splat due to wakeup irq handling
2015-11-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds3-5/+9
Pull MIPS fix from Ralf Baechle: "Just a fix for empty loops that may be removed by non-antique GCC" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix delay loops which may be removed by GCC.
2015-11-30Merge branch 'for-linus' of ↵Linus Torvalds7-8/+13
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fixes from Geert Uytterhoeven: "Summary: - Add missing initialization of max_pfn, which is needed to make selftests/vm/mlock2-tests succeed, - Wire up new mlock2 syscall" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up mlock2 m68knommu: Add missing initialization of max_pfn and {min,max}_low_pfn m68k/mm: sun3 - Add missing initialization of max_pfn and {min,max}_low_pfn m68k/mm: m54xx - Add missing initialization of max_pfn m68k/mm: motorola - Add missing initialization of max_pfn
2015-11-30Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds3-2/+4
Pull ARM fixes from Russell King: "Just two changes this time around: - wire up the new mlock2 syscall added during the last merge window - fix a build problem with certain configurations provoked by making CONFIG_OF user selectable" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8454/1: OF implies OF_FLATTREE ARM: wire up mlock2 syscall
2015-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds11-64/+53
Pull SCSI target fixes from Nicholas Bellinger: - fix tcm-user backend driver expired cmd time processing (agrover) - eliminate kref_put_spinlock_irqsave() for I/O completion (bart) - fix iscsi login kthread failure case hung task regression (nab) - fix COMPARE_AND_WRITE completion use-after-free race (nab) - fix COMPARE_AND_WRITE with SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC non zero SGL offset data corruption. (Jan + Doug) - fix >= v4.4-rc1 regression for tcm_qla2xxx enable configfs attribute (Himanshu + HCH) * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/stat: print full t10_wwn.model buffer target: fix COMPARE_AND_WRITE non zero SGL offset data corruption qla2xxx: Fix regression introduced by target configFS changes kref: Remove kref_put_spinlock_irqsave() target: Invoke release_cmd() callback without holding a spinlock target: Fix race for SCF_COMPARE_AND_WRITE_POST checking iscsi-target: Fix rx_login_comp hang after login failure iscsi-target: return -ENOMEM instead of -1 in case of failed kmalloc() target/user: Do not set unused fields in tcmu_ops target/user: Fix time calc in expired cmd processing
2015-11-29Merge branch 'next' of ↵Linus Torvalds8-152/+316
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: "Specifics: - several fixes and cleanups on Rockchip thermal drivers. - add the missing support of RK3368 SoCs in Rockchip driver. - small fixes on of-thermal, power_allocator, rcar driver, IMX, and QCOM drivers, and also compilation fixes, on thermal.h, when thermal is not selected" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: imx: thermal: use CPU temperature grade info for thresholds thermal: fix thermal_zone_bind_cooling_device prototype Revert "thermal: qcom_spmi: allow compile test" thermal: rcar_thermal: remove redundant operation thermal: of-thermal: Reduce log level for message when can't fine thermal zone thermal: power_allocator: Use temperature reading from tz thermal: rockchip: Support the RK3368 SoCs in thermal driver thermal: rockchip: consistently use int for temperatures thermal: rockchip: Add the sort mode for adc value increment or decrement thermal: rockchip: improve the conversion function thermal: rockchip: trivial: fix typo in commit thermal: rockchip: better to compatible the driver for different SoCs dt-bindings: rockchip-thermal: Support the RK3368 SoCs compatible
2015-11-29target/stat: print full t10_wwn.model bufferDavid Disseldorp1-1/+1
Cut 'n paste error saw it only process sizeof(t10_wwn.vendor) characters. Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-11-29target: fix COMPARE_AND_WRITE non zero SGL offset data corruptionJan Engelhardt1-2/+2
target_core_sbc's compare_and_write functionality suffers from taking data at the wrong memory location when writing a CAW request to disk when a SGL offset is non-zero. This can happen with loopback and vhost-scsi fabric drivers when SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is used to map existing user-space SGL memory into COMPARE_AND_WRITE READ/WRITE payload buffers. Given the following sample LIO subtopology, % targetcli ls /loopback/ o- loopback ................................. [1 Target] o- naa.6001405ebb8df14a ....... [naa.60014059143ed2b3] o- luns ................................... [2 LUNs] o- lun0 ................ [iblock/ram0 (/dev/ram0)] o- lun1 ................ [iblock/ram1 (/dev/ram1)] % lsscsi -g [3:0:1:0] disk LIO-ORG IBLOCK 4.0 /dev/sdc /dev/sg3 [3:0:1:1] disk LIO-ORG IBLOCK 4.0 /dev/sdd /dev/sg4 the following bug can be observed in Linux 4.3 and 4.4~rc1: % perl -e 'print chr$_ for 0..255,reverse 0..255' >rand % perl -e 'print "\0" x 512' >zero % cat rand >/dev/sdd % sg_compare_and_write -i rand -D zero --lba 0 /dev/sdd % sg_compare_and_write -i zero -D rand --lba 0 /dev/sdd Miscompare reported % hexdump -Cn 512 /dev/sdd 00000000 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00000200 Rather than writing all-zeroes as instructed with the -D file, it corrupts the data in the sector by splicing some of the original bytes in. The page of the first entry of cmd->t_data_sg includes the CDB, and sg->offset is set to a position past the CDB. I presume that sg->offset is also the right choice to use for subsequent sglist members. Signed-off-by: Jan Engelhardt <jengelh@netitwork.de> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-11-29qla2xxx: Fix regression introduced by target configFS changesHimanshu Madhani1-1/+1
this patch fixes following regression # targetcli [Errno 13] Permission denied: '/sys/kernel/config/target/qla2xxx/21:00:00:0e:1e:08:c7:20/tpgt_1/enable' Fixes: 2eafd72939fd ("target: use per-attribute show and store methods") Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-11-29kref: Remove kref_put_spinlock_irqsave()Bart Van Assche1-33/+0
The last user is gone. Hence remove this function. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-11-29target: Invoke release_cmd() callback without holding a spinlockBart Van Assche2-7/+12
This patch fixes the following kernel warning because it avoids that IRQs are disabled while ft_release_cmd() is invoked (fc_seq_set_resp() invokes spin_unlock_bh()): WARNING: CPU: 3 PID: 117 at kernel/softirq.c:150 __local_bh_enable_ip+0xaa/0x110() Call Trace: [<ffffffff814f71eb>] dump_stack+0x4f/0x7b [<ffffffff8105e56a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff8105e65a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81062b2a>] __local_bh_enable_ip+0xaa/0x110 [<ffffffff814ff229>] _raw_spin_unlock_bh+0x39/0x40 [<ffffffffa03a7f94>] fc_seq_set_resp+0xe4/0x100 [libfc] [<ffffffffa02e604a>] ft_free_cmd+0x4a/0x90 [tcm_fc] [<ffffffffa02e6972>] ft_release_cmd+0x12/0x20 [tcm_fc] [<ffffffffa042bd66>] target_release_cmd_kref+0x56/0x90 [target_core_mod] [<ffffffffa042caf0>] target_put_sess_cmd+0xc0/0x110 [target_core_mod] [<ffffffffa042cb81>] transport_release_cmd+0x41/0x70 [target_core_mod] [<ffffffffa042d975>] transport_generic_free_cmd+0x35/0x420 [target_core_mod] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joern Engel <joern@logfs.org> Reviewed-by: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-11-29target: Fix race for SCF_COMPARE_AND_WRITE_POST checkingNicholas Bellinger3-11/+18
This patch addresses a race + use after free where the first stage of COMPARE_AND_WRITE in compare_and_write_callback() is rescheduled after the backend sends the secondary WRITE, resulting in second stage compare_and_write_post() callback completing in target_complete_ok_work() before the first can return. Because current code depends on checking se_cmd->se_cmd_flags after return from se_cmd->transport_complete_callback(), this results in first stage having SCF_COMPARE_AND_WRITE_POST set, which incorrectly falls through into second stage CAW processing code, eventually triggering a NULL pointer dereference due to use after free. To address this bug, pass in a new *post_ret parameter into se_cmd->transport_complete_callback(), and depend upon this value instead of ->se_cmd_flags to determine when to return or fall through into ->queue_status() code for CAW. Cc: Sagi Grimberg <sagig@mellanox.com> Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-11-29iscsi-target: Fix rx_login_comp hang after login failureNicholas Bellinger2-1/+13
This patch addresses a case where iscsi_target_do_tx_login_io() fails sending the last login response PDU, after the RX/TX threads have already been started. The case centers around iscsi_target_rx_thread() not invoking allow_signal(SIGINT) before the send_sig(SIGINT, ...) occurs from the failure path, resulting in RX thread hanging indefinately on iscsi_conn->rx_login_comp. Note this bug is a regression introduced by: commit e54198657b65625085834847ab6271087323ffea Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 22 23:14:19 2015 -0700 iscsi-target: Fix iscsit_start_kthreads failure OOPs To address this bug, complete ->rx_login_complete for good measure in the failure path, and immediately return from RX thread context if connection state did not actually reach full feature phase (TARG_CONN_STATE_LOGGED_IN). Cc: Sagi Grimberg <sagig@mellanox.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-02 06:53:07 +0300