summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-09-18mac80211: support using ieee80211_tx_status_ext to free skbs without status infoFelix Fietkau1-11/+16
For encap-offloaded packets, ieee80211_free_txskb cannot be used, since it does not have the vif pointer. Using ieee80211_tx_status_ext for this purpose has the advantage of being able avoid an extra station lookup for AQL Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-12-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: unify 802.3 (offload) and 802.11 tx status codepathFelix Fietkau1-64/+28
Make ieee80211_tx_status_8023 call ieee80211_tx_status_ext, similar to ieee80211_tx_status. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-11-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: optimize station connection monitorFelix Fietkau5-47/+22
Calling mod_timer for every rx/tx packet can be quite expensive. Instead of constantly updating the timer, we can simply let it run out and check the timestamp of the last ACK or rx packet to re-arm it. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-9-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: notify the driver when a sta uses 4-address modeFelix Fietkau5-0/+49
This is needed for encapsulation offload of 4-address mode packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-14-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: swap NEED_TXPROCESSING and HW_80211_ENCAP tx flagsFelix Fietkau8-25/+25
In order to unify the tx status path, the hw 802.11 encapsulation flag needs to survive the trip to the tx status call. Since we don't have any free bits in info->flags, we need to move one. IEEE80211_TX_INTFL_NEED_TXPROCESSING is only used internally in mac80211, and only before the call into the driver. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-10-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: remove tx status call to ieee80211_sta_register_airtimeFelix Fietkau2-8/+3
All drivers using airtime fairness are calling ieee80211_sta_register_airtime directly, now they must. Document this as well. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-8-nbd@nbd.name [johannes: update the documentation to suit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: reduce duplication in tx status functionsFelix Fietkau1-66/+35
Move redundant functionality from __ieee80211_tx_status into ieee80211_tx_status_ext. Preparation for unifying with the 802.3 tx status codepath. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-7-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: rework tx encapsulation offload APIFelix Fietkau9-114/+219
The current API (which lets the driver turn on/off per vif directly) has a number of limitations: - it does not deal with AP_VLAN - conditions for enabling (no tkip, no monitor) are only checked at add_interface time - no way to indicate 4-addr support In order to address this, store offload flags in struct ieee80211_vif (easy to extend for decap offload later). mac80211 initially sets the enable flag, but gives the driver a chance to modify it before its settings are applied. In addition to the .add_interface op, a .update_vif_offload op is introduced, which can be used for runtime changes. If a driver can't disable encap offload at runtime, or if it has some extra limitations, it can simply override the flags within those ops. Support for encap offload with 4-address mode interfaces can be enabled by setting a flag from .add_interface or .update_vif_offload. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-6-nbd@nbd.name [resolved conflict with commit aa2092a9bab3 ("ath11k: add raw mode and software crypto support")] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: set info->control.hw_key for encap offload packetsFelix Fietkau1-0/+5
This is needed for drivers that don't do the key lookup themselves Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: skip encap offload for tx multicast/control packetsFelix Fietkau1-55/+19
This simplifies the checks in the encap offload tx handler and allows using it in cases where software crypto is used for multicast packets, e.g. when using an AP_VLAN. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-4-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: check and refresh aggregation session in encap offload txFelix Fietkau1-0/+18
Update the last_tx timestamp to avoid tearing down the aggregation session early. Fall back to the slow path if the session setup is still running Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: add missing queue/hash initialization to 802.3 xmitFelix Fietkau1-0/+6
Fixes AQL for encap-offloaded tx Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18cfg80211: add more comments for ap_isolate in bss_parametersWright Feng1-0/+1
The value of struct bss_parameters::ap_isolate will be -1, 0 or 1. The value -1 means not to change. To prevent developers from thinking ap_isolate is only 0 or 1, I add more comments on it. Signed-off-by: Wright Feng <wright.feng@cypress.com> Reviewed-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200908060157.98846-1-wright.feng@cypress.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18lib80211: Remove unused macro DRV_NAMEYueHaibing1-2/+0
There is no caller in tree any more. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200829115506.17828-1-yuehaibing@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mptcp: fix integer overflow in mptcp_subflow_discard_data()Paolo Abeni1-1/+1
Christoph reported an infinite loop in the subflow receive path under stress condition. If there are multiple subflows, each of them using a large send buffer, the delta between the sequence number used by MPTCP-level retransmission can and the current msk->ack_seq can be greater than MAX_INT. In the above scenario, when calling mptcp_subflow_discard_data(), such delta will be truncated to int, and could result in a negative number: no bytes will be dropped, and subflow_check_data_avail() will try again to process the same packet, looping forever. This change addresses the issue by expanding the 'limit' size to 64 bits, so that overflows are not possible anymore. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/87 Fixes: 6719331c2f73 ("mptcp: trigger msk processing even for OoO data") Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net/smc: fix double kfree in smc_listen_work()Ursula Braun1-2/+2
If smc_listen_rmda_finish() returns with an error, the storage addressed by 'buf' is freed a second time. Consolidate freeing under a common label and jump to that label. Fixes: 6bb14e48ee8d ("net/smc: dynamic allocation of CLC proposal buffer") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18ionic: add DIMLIB to KconfigShannon Nelson1-0/+1
>> ld.lld: error: undefined symbol: net_dim_get_rx_moderation >>> referenced by ionic_lif.c:52 (drivers/net/ethernet/pensando/ionic/ionic_lif.c:52) >>> net/ethernet/pensando/ionic/ionic_lif.o:(ionic_dim_work) in archive drivers/built-in.a >> ld.lld: error: undefined symbol: net_dim >>> referenced by ionic_txrx.c:456 (drivers/net/ethernet/pensando/ionic/ionic_txrx.c:456) >>> net/ethernet/pensando/ionic/ionic_txrx.o:(ionic_dim_update) in archive drivers/built-in.a v2: removed sketchy dashes in commit message Fixes: 04a834592bf5 ("ionic: dynamic interrupt moderation") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: remove comments on struct rtnl_link_statsJakub Kicinski1-16/+15
We removed the misleading comments from struct rtnl_link_stats64 when we added proper kdoc. struct rtnl_link_stats has the same inline comments, so remove them, too. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: mdio: octeon: Select MDIO_DEVRESAndrew Lunn1-0/+1
This driver makes use of devm_mdiobus_alloc_size. To ensure this is available select MDIO_DEVRES which provides it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18selftests: Set default protocol for raw sockets in nettestDavid Ahern1-0/+2
IPPROTO_IP (0) is not valid for raw sockets. Default the protocol for raw sockets to IPPROTO_RAW if the protocol has not been set via the -P option. Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18dpaa2-eth: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao1-57/+6
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: hsr: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao1-19/+2
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18Merge branch 'mlxsw-Support-dcbnl_setbuffer-dcbnl_getbuffer'David S. Miller4-4/+122
Ido Schimmel says: ==================== mlxsw: Support dcbnl_setbuffer, dcbnl_getbuffer Petr says: On Spectrum, port buffers, also called port headroom, is where packets are stored while they are parsed and the forwarding decision is being made. For lossless traffic flows, in case shared buffer admission is not allowed, headroom is also where to put the extra traffic received before the sent PAUSE takes effect. Linux supports two DCB interfaces related to the headroom: dcbnl_setbuffer for configuration, and dcbnl_getbuffer for inspection. This patch set implements them. With dcbnl_setbuffer in place, there will be two sources of authority over the ingress configuration: the DCB ETS hook, because ETS configuration is mirrored to ingress, and the DCB setbuffer hook. mlxsw is in a similar situation on the egress side, where there are two sources of the ETS configuration: the DCB ETS hook, and the TC qdisc hooks. This is a non-intuitive situation, because the way the ASIC ends up being configured depends not only on the actual configured bits, but also on the order in which they were configured. To prevent these issues on the ingress side, two configuration modes will exist: DCB mode and TC mode. DCB ETS will keep getting projected to ingress in the (default) DCB mode. When a qdisc is installed on a port, it will be switched to the TC mode, the ingress configuration will be done through the dcbnl_setbuffer callback. The reason is that the dcbnl_setbuffer hook is not standardized and supported by lldpad. Projecting DCB ETS configuration to ingress is a reasonable heuristic to configure ingress especially when PFC is in effect. In patch #1, the toggle between the DCB and TC modes of headroom configuration, described above, is introduced. Patch #2 implements dcbnl_getbuffer and dcbnl_setbuffer. dcbnl_getbuffer can be always used to determine the current port headroom configuration. dcbnl_setbuffer is only permitted in the TC mode. In patch #3, make the qdisc module toggle the headroom mode from DCB to TC and back, depending on whether there is an offloaded qdisc on the port. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18mlxsw: spectrum_qdisc: Disable port buffer autoresize with qdiscsPetr Machata1-1/+33
There are two interfaces to configure ETS: qdiscs and DCB. Historically, DCB ETS configuration was projected to ingress as well, and configured port buffers. Qdisc was not. Keep qdiscs behaving this way, and if an offloaded qdisc is configured on a port, move this port's headroom to a manual mode, thus allowing configuration of port buffers through dcbnl_setbuffer. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18mlxsw: spectrum_dcb: Implement dcbnl_setbuffer / getbufferPetr Machata1-0/+59
Add dcbnl_setbuffer, which bounces requests if a headroom is in DCB mode. Implement dcbnl_getbuffer such that it can always be used to determine port-buffer configuration, regardless of headroom mode. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18mlxsw: spectrum_buffers: Support two headroom modesPetr Machata2-3/+30
There are two interfaces to configure ETS: qdiscs and DCB. Historically, DCB ETS configuration was projected to ingress as well, and configured port buffers. Qdisc was not. So as not to break clients that today use DCB ETS and PFC and rely on getting a reasonable ingress buffer priomap, keep the ETS mirroring in effect. Since qdiscs have not done this mirroring historically, it is reasonable not to introduce it, but rather permit manual ingress configuration through dcbnl_setbuffer only in the qdisc mode. This will require a toggle to indicate whether buffer sizes should be autocomputed or taken from dcbnl_setbuffer, and likewise for priomaps. Introduce such and initialize it, and guard port buffer size configuration as appropriate. The toggle is currently left in the DCB position. In a following patch, qdisc code will switch it. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18netlink: add spaces around '&' in netlink_recv/sendmsg()Yang Yingliang1-4/+4
It's hard to read the code without spaces around '&', for better reading, add spaces around '&'. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18netdev: Remove unused functionsYueHaibing1-10/+0
There is no callers in tree, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18mptcp: Fix unsigned 'max_seq' compared with zero in mptcp_data_queue_ofoYe Bin1-2/+3
Fixes coccicheck warnig: net/mptcp/protocol.c:164:11-18: WARNING: Unsigned expression compared with zero: max_seq > 0 Fixes: ab174ad8ef76 ("mptcp: move ooo skbs into msk out of order queue") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18Merge branch ↵David S. Miller20-0/+6335
'net-marvell-prestera-Add-Switchdev-driver-for-Prestera-family-ASIC-device-98DX3255-AC3x' Vadym Kochan says: ==================== net: marvell: prestera: Add Switchdev driver for Prestera family ASIC device 98DX3255 (AC3x) Marvell Prestera 98DX3255 integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. Prestera Switchdev is a firmware based driver that operates via PCI bus. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. This driver implementation includes only L1, basic L2 support, and RX/TX. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. The following Switchdev features are supported: - VLAN-aware bridge offloading - VLAN-unaware bridge offloading - FDB offloading (learning, ageing) - Switchport configuration The original firmware image is uploaded to the linux-firmware repository. PATCH v9: 1) Replace read_poll_timeout_atomic() by original 'do {} while()' loop because it works much better than read_poll_timeout_atomic() considering the TX rate. Also it fixes warning reported on v8. 2) Use ENOENT instead of EEXIST when item is not found in few places - prestera_hw.c and prestera_rxtx.c Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices PATCH v8: 1) Put license in one line. 2) Sort includes. 3) Add missing comma for last enum member 4) Return original error code from last called func in places where instead other error code was used. 5) Add comma for last member in initialized struct in prestera_hw.c 6) Do not initialize 'int err = 0' where it is not needed. 7) Simplify device-tree "marvell,prestera" node parsing by removing not needed checking on 'np == NULL'. 8) Use u32p_replace_bits() instead of open-coded ((word & ~mask) | val) 9) Use dev_warn_ratelimited() instead of pr_warn_ratelimited to indicate the device instance in prestera_rxtx.c 10) Simplify circular buffer list creation in prestera_sdma_{rx,tx}_init() by using do { } while (prev != tail) construction. 11) Use MSEC_PER_SEC instead of hard-coded 1000. 12) Use traditional error handling pattern: err = F(); if (err) return err; 13) Use ether_addr_copy() instead of memcpy() for mac FDB copying in prestera_hw.c 14) Drop swdev->ageing_time member which is not used. 15) Fix ageing macro to be in ms instead of seconds. Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices [2] net: marvell: prestera: Add PCI interface support [3] net: marvell: prestera: Add basic devlink support [4] net: marvell: prestera: Add ethtool interface support [5] net: marvell: prestera: Add Switchdev driver implementation PATCH v7: 1) Use ether_addr_copy() in prestera_main.c:prestera_port_set_mac_address() instead of memcpy(). 2) Removed not needed device's DMA address range check on dma_pool_alloc() in prestera_rxtx.c:prestera_sdma_buf_init(), this should be handled by dma_xxx() API considerig device's DMA mask. 3) Removed not needed device's DMA address range check on dma_map_single() in prestera_rxtx.c:prestera_sdma_rx_skb_alloc(), this should be handled by dma_xxx() API considerig device's DMA mask. 4) Add comment about port mac address limitation in the code where it is used and checked - prestera_main.c: - prestera_is_valid_mac_addr() - prestera_port_create() 5) Add missing destroy_workqueue(swdev_wq) in prestera_switchdev.c:prestera_switchdev_init() on error path handling. Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices [5] net: marvell: prestera: Add Switchdev driver implementation PATCH v6: 1) Use rwlock to protect port list on create/delete stages. The list is mostly readable by fw event handler or packets receiver, but updated only on create/delete port which are performed on switch init/fini stages. 2) Remove not needed variable initialization in prestera_dsa.c:prestera_dsa_parse() 3) Get rid of bounce buffer used by tx handler in prestera_rxtx.c, the bounce buffer should be handled by dma_xxx API via swiotlb. 4) Fix PRESTERA_SDMA_RX_DESC_PKT_LEN macro by using correct GENMASK(13, 0) in prestera_rxtx.c Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices PATCH v5: 0) add Co-developed tags for people who was involved in development. 1) Make SPDX license as separate comment 2) Change 'u8 *' -> 'void *', It allows to avoid not-needed u8* casting. 3) Remove "," in terminated enum's. 4) Use GENMASK(end, start) where it is applicable in. 5) Remove not-needed 'u8 *' casting. 6) Apply common error-check pattern 7) Use ether_addr_copy instead of memcpy 8) Use define for maximum MAC address range (255) 9) Simplify prestera_port_state_set() in prestera_main.c by using separate if-blocks for state setting: if (is_up) { ... } else { ... } which makes logic more understandable. 10) Simplify sdma tx wait logic when checking/updating tx_ring->burst. 11) Remove not-needed packed & aligned attributes 12) Use USEC_PER_MSEC as multiplier when converting ms -> usec on calling readl_poll_timeout. 13) Simplified some error path handling by simple return error code in. 14) Remove not-needed err assignment in. 15) Use dev_err() in prestera_devlink_register(...). Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices [2] net: marvell: prestera: Add PCI interface support [3] net: marvell: prestera: Add basic devlink support [4] net: marvell: prestera: Add ethtool interface support [5] net: marvell: prestera: Add Switchdev driver implementation PATCH v4: 1) Use prestera_ prefix in netdev_ops variable. 2) Kconfig: use 'default PRESTERA' build type for CONFIG_PRESTERA_PCI to be synced by default with prestera core module. 3) Use memcpy_xxio helpers in prestera_pci.c for IO buffer copying. 4) Generate fw image path via snprintf() instead of macroses. 5) Use pcim_ helpers in prestera_pci.c which simplified the probe/remove logic. 6) Removed not needed initializations of variables which are used in readl_poll_xxx() helpers. 7) Fixed few grammar mistakes in patch[2] description. 8) Export only prestera_ethtool_ops struct instead of each ethtool handler. 9) Add check for prestera_dev_check() in switchdev event handling to make sure there is no wrong topology. Patches updated: [1] net: marvell: prestera: Add driver for Prestera family ASIC devices [2] net: marvell: prestera: Add PCI interface support [4] net: marvell: prestera: Add ethtool interface support [5] net: marvell: prestera: Add Switchdev driver implementation PATCH v3: 1) Simplify __be32 type casting in prestera_dsa.c 2) Added per-patch changelog under "---" line. PATCH v2: 1) Use devlink_port_type_clear() 2) Add _MS prefix to timeout defines. 3) Remove not-needed packed attribute from the firmware ipc structs, also the firmware image needs to be uploaded too (will do it soon). 4) Introduce prestera_hw_switch_fini(), to be mirrored with init and do simple validation if the event handlers are unregistered. 5) Use kfree_rcu() for event handler unregistering. 6) Get rid of rcu-list usage when dealing with ports, not needed for now. 7) Little spelling corrections in the error/info messages. 8) Make pci probe & remove logic mirrored. 9) Get rid of ETH_FCS_LEN in headroom setting, not needed. PATCH: 1) Fixed W=1 warnings 2) Renamed PCI driver name to be more generic "Prestera DX" because there will be more devices supported. 3) Changed firmware image dir path: marvell/ -> mrvl/prestera/ to be aligned with location in linux-firmware.git (if such will be accepted). RFC v3: 1) Fix prestera prefix in prestera_rxtx.c 2) Protect concurrent access from multiple ports on multiple CPU system on tx path by spinlock in prestera_rxtx.c 3) Try to get base mac address from device-tree, otherwise use a random generated one. 4) Move ethtool interface support into separate prestera_ethtool.c file. 5) Add basic devlink support and get rid of physical port naming ops. 6) Add STP support in Switchdev driver. 7) Removed MODULE_AUTHOR 8) Renamed prestera.c -> prestera_main.c, and kernel module to prestera.ko RFC v2: 1) Use "pestera_" prefix in struct's and functions instead of mvsw_pr_ 2) Original series split into additional patches for Switchdev ethtool support. 3) Use major and minor firmware version numbers in the firmware image filename. 4) Removed not needed prints. 5) Use iopoll API for waiting on register's value in prestera_pci.c 6) Use standart approach for describing PCI ID matching section instead of using custom wrappers in prestera_pci.c 7) Add RX/TX support in prestera_rxtx.c. 8) Rewritten prestera_switchdev.c with following changes: - handle netdev events from prestera.c - use struct prestera_bridge for bridge objects, and get rid of struct prestera_bridge_device which may confuse. - use refcount_t 9) Get rid of macro usage for sending fw requests in prestera_hw.c 10) Add base_mac setting as module parameter. base_mac is required for generation default port's mac. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18dt-bindings: marvell,prestera: Add description for device-tree bindingsVadym Kochan1-0/+34
Add brief description how to configure base mac address binding in device-tree. Describe requirement for the PCI port which is connected to the ASIC, to allow access to the firmware related registers. Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: marvell: prestera: Add Switchdev driver implementationVadym Kochan7-4/+1807
The following features are supported: - VLAN-aware bridge offloading - VLAN-unaware bridge offloading - FDB offloading (learning, ageing) - Switchport configuration Currently there are some limitations like: - Only 1 VLAN-aware bridge instance supported - FDB ageing timeout parameter is set globally per device Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: marvell: prestera: Add ethtool interface supportVadym Kochan7-6/+1182
The ethtool API provides support for the configuration of the following features: speed and duplex, auto-negotiation, MDI-x, forward error correction, port media type. The API also provides information about the port status, hardware and software statistic. The following limitation exists: - port media type should be configured before speed setting - ethtool -m option is not supported - ethtool -p option is not supported - ethtool -r option is supported for RJ45 port only - the following combination of parameters is not supported: ethtool -s sw1pX port XX autoneg on - forward error correction feature is supported only on SFP ports, 10G speed - auto-negotiation and MDI-x features are not supported on Copper-to-Fiber SFP module Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: marvell: prestera: Add basic devlink supportVadym Kochan6-5/+165
Add very basic support for devlink interface: - driver name - fw version - devlink ports Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: marvell: prestera: Add PCI interface supportVadym Kochan3-0/+782
Add PCI interface driver for Prestera Switch ASICs family devices, which provides: - Firmware loading mechanism - Requests & events handling to/from the firmware - Access to the firmware on the bus level The firmware has to be loaded each time the device is reset. The driver is loading it from: /lib/firmware/mrvl/prestera/mvsw_prestera_fw-v{MAJOR}.{MINOR}.img The full firmware image version is located within the internal header and consists of 3 numbers - MAJOR.MINOR.PATCH. Additionally, driver has hard-coded minimum supported firmware version which it can work with: MAJOR - reflects the support on ABI level between driver and loaded firmware, this number should be the same for driver and loaded firmware. MINOR - this is the minimum supported version between driver and the firmware. PATCH - indicates only fixes, firmware ABI is not changed. Firmware image file name contains only MAJOR and MINOR numbers to make driver be compatible with any PATCH version. Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: marvell: prestera: Add driver for Prestera family ASIC devicesVadym Kochan12-0/+2380
Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18genetlink: Remove unused function genl_err_attr()YueHaibing1-8/+0
It is never used, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net/sched: Remove unused function qdisc_queue_drop_head()YueHaibing1-6/+0
It is not used since commit a09ceb0e0814 ("sched: remove qdisc->drop") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18selftests: mptcp: interpret \n as a new lineMatthieu Baerts2-4/+4
In case of errors, this message was printed: (...) # read: Resource temporarily unavailable # client exit code 0, server 3 # \nnetns ns1-0-BJlt5D socket stat for 10003: (...) Obviously, the idea was to add a new line before the socket stat and not print "\nnetns". Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN") Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net/packet: Fix a comment about mac_headerXie He1-11/+12
1. Change all "dev->hard_header" to "dev->header_ops" 2. On receiving incoming frames when header_ops == NULL: The comment only says what is wrong, but doesn't say what is right. This patch changes the comment to make it clear what is right. 3. On transmitting and receiving outgoing frames when header_ops == NULL: The comment explains that the LL header will be later added by the driver. However, I think it's better to simply say that the LL header is invisible to us. This phrasing is better from a software engineering perspective, because this makes it clear that what happens in the driver should be hidden from us and we should not care about what happens internally in the driver. 4. On resuming the LL header (for RAW frames) when header_ops == NULL: The comment says we are "unlikely" to restore the LL header. However, we should say that we are "unable" to restore it. It's not possible (rather than not likely) to restore it, because: 1) There is no way for us to restore because the LL header internally processed by the driver should be invisible to us. 2) In function packet_rcv and tpacket_rcv, the code only tries to restore the LL header when header_ops != NULL. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18Merge branch 'net-hns3-updates-for-next'David S. Miller3-111/+140
Huazhong Tan says: ==================== net: hns3: updates for -next There are some optimizations related to IO path. Change since V1: - fixes a unsuitable handling in hns3_lb_clear_tx_ring() of #6 which pointed out by Saeed Mahameed. previous version: V1: https://patchwork.ozlabs.org/project/netdev/cover/1600085217-26245-1-git-send-email-tanhuazhong@huawei.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: hns3: use napi_consume_skb() when cleaning tx descYunsheng Lin3-15/+16
Use napi_consume_skb() to batch consuming skb when cleaning tx desc in NAPI polling. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: hns3: use writel() to optimize the barrier operationYunsheng Lin2-8/+3
writel() can be used to order I/O vs memory by default when writing portable drivers. Use writel() to replace wmb() + writel_relaxed(), and writel() is dma_wmb() + writel_relaxed() for ARM64, so there is an optimization here because dma_wmb() is a lighter barrier than wmb(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: hns3: optimize the rx clean processYunsheng Lin1-30/+31
Currently HNS3_RING_RX_RING_FBDNUM_REG register is read to determine how many rx desc can be cleaned. To avoid the register read operation in the critical data path, use the valid bit in the rx desc to determine if a specific rx desc can be cleaned. The hns3 driver clear valid bit in the rx desc before notifying the rx desc to the hw, and hw will only set the valid bit of the rx desc after corresponding buffer is filled with packet data and other field in the rx desc is set accordingly. Add hns3_rx_ring_move_fw() function to clear the valid bit in the rx desc before moving rx ring's next_to_clean forward to avoid double cleaning a rx desc, also add a dma_rmb() barrier in hns3_handle_rx_bd() to make sure valid bit is set before reading other field in the rx desc. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: hns3: optimize the tx clean processYunsheng Lin3-45/+33
Currently HNS3_RING_TX_RING_HEAD_REG register is read to determine how many tx desc can be cleaned. To avoid the register read operation in the critical data path, use the valid bit in the tx desc to determine if a specific tx desc can be cleaned. The hns3 driver sets valid bit in the tx desc before ringing a doorbell to the hw, and hw will only clear the valid bit of the tx desc after corresponding packet is sent out to the wire. And because next_to_use for tx ring is a changing variable when the driver is filling the tx desc, so reuse the pull_len for rx ring to record the tx desc that has notified to the hw, so that hns3_nic_reclaim_desc() can decide how many tx desc's valid bit need checking when reclaiming tx desc. And io_err_cnt stat is also removed for it is not used anymore. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: hns3: batch tx doorbell operationYunsheng Lin3-12/+39
Use netdev_xmit_more() to defer the tx doorbell operation when the skb is passed to the driver continuously. By doing this we can improve the overall xmit performance by avoid some doorbell operations. Also, the tx_err_cnt stat is not used, so rename it to tx_more stat. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: hns3: batch the page reference count updatesYunsheng Lin2-8/+25
Batch the page reference count updates instead of doing them one at a time. By doing this we can improve the overall receive performance by avoid some atomic increment operations when the rx page is reused. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17cxgb4vf: convert to use DEFINE_SEQ_ATTRIBUTE macroLiu Shixin1-81/+11
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17ionic: dynamic interrupt moderationShannon Nelson6-31/+112
Use the dim library to manage dynamic interrupt moderation in ionic. v3: rebase v2: untangled declarations in ionic_dim_work() Signed-off-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net/smc: check variable before dereferencing in smc_close.cKarsten Graul1-3/+4
smc->clcsock and smc->clcsock->sk are used before the check if they can be dereferenced. Fix this by checking the variables first. Fixes: a60a2b1e0af1 ("net/smc: reduce active tcp_listen workers") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 17:48:41 +0300