summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-10-16mtd: nand: initialize ops.modeBrian Norris1-0/+4
Our `ops' information was converted to a local variable recently, and apparently, old code relied on the fact that the global version was often left in a valid mode. We can't make this assumption on local structs, and we shouldn't be relying on a previous state anyway. Instead, we initialize mode to 0 for don't-care situations (i.e., the operation does not use OOB anyway) and MTD_OPS_PLACE_OOB when we want to place OOB data. This fixes a bug with nand_default_block_markbad(), where we catch on the BUG() call in nand_fill_oob(): Kernel bug detected[#1]: ... Call Trace: [<80307350>] nand_fill_oob.clone.5+0xa4/0x15c [<803075d8>] nand_do_write_oob+0x1d0/0x260 [<803077c4>] nand_default_block_markbad+0x15c/0x1a8 [<802e8c2c>] part_block_markbad+0x80/0x98 [<802ebc74>] mtd_ioctl+0x6d8/0xbd0 [<802ec1a4>] mtd_unlocked_ioctl+0x38/0x5c [<800d9c60>] do_vfs_ioctl+0xa4/0x6e4 [<800da2e4>] sys_ioctl+0x44/0xa0 [<8001381c>] stack_done+0x20/0x40 Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-10-16mtd: provide an alias for the redboot module nameAndres Salomon1-0/+3
parse_mtd_partitions takes a list of partition types; if the driver isn't loaded, it attempts to load it, and then it grabs the partition parser. For redboot, the module name is "redboot.ko", while the parser name is "RedBoot". Since modprobe is case-sensitive, attempting to modprobe "RedBoot" will never work. I suspect the embedded systems that make use of redboot just always manually loaded redboot prior to loading their specific nand chip drivers (or statically compiled it in). Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@kernel.org
2011-10-16mtd: m25p80: don't probe device which has status of 'disabled'Shaohui Xie1-0/+6
On some platforms such as P3060QDS, has multiple spi flashes, but they are not available at same time, so if their status is 'disabled', which is set by u-boot, will not be probed. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-10-16mtd: nand_h1900 never workedArnd Bergmann1-1/+1
This driver has been broken through all of git history and cannot even be built. Better mark it as broken. Next stop is removing from the tree. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-10-14mtd: Add DiskOnChip G3 supportRobert Jarzmik4-0/+1424
Add support for DiskOnChip G3 chips. The support is quite limited yet : - no flash writes/erases are implemented - ECC fixes are not implemented - powerdown is not implemented - IPL handling is not yet done On the brighter side, the chip reading does work. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2011-10-14mtd: m25p80: add EON flash EN25Q32B into spi flash id tableShaohui Xie1-0/+1
Add support for EON spi flash EN25Q32B, which is not listed in id table, need to add it in the id table to support the EON flash. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-10-14mtd: mark block device queue as non-rotationalDan McGee1-0/+2
This is similar to what the nbd driver does, among others. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-10-01mtd: r852: make r852_pm_ops staticAxel Lin1-3/+3
It is not used outside this driver so no need to make the symbol global. Also make r852_suspend and r852_resume static. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-26mtd: m25p80: add support for at25df321a spi data flashMikhail Kshevetskiy1-0/+1
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-23mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocksWolfram Stering1-1/+1
For NFC v1, the unlock end block address was 0x4000, which would only unlock the first 32 blocks of the NAND flash. Change that value to 0xffff to unlock all available blocks, as is done for NFC v21 as well. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: switch `check_pattern()' to standard `memcmp()'Brian Norris1-4/+2
A portion of the `check_pattern()' function is basically a `memcmp()'. Since it's possible for `memcmp()' to be optimized for a particular architecture, we should use it instead. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: invalidate cache on unaligned readsBrian Norris1-2/+10
In rare cases, we are given an unaligned parameter `from' in `nand_do_read_ops()'. In such cases, we use the page cache (chip->buffers->databuf) as an intermediate buffer before dumping to the client buffer. However, there are also cases where this buffer is not cleanly reusable. In those cases, we need to make sure that we explicitly invalidate the cache. This patch prevents accidental reusage of the page cache, and for me, this solves some problems I come across when reading a corrupted BBT from flash (NAND_BBT_USE_FLASH and NAND_BBT_NO_OOB). Note: the rare "unaligned" case is a result of the extra BBT pattern + version located in the data area instead of OOB. Also, this patch disables caching on raw reads, since we are reading without error correction. This is, obviously, prone to errors and should not be cached. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB setBrian Norris1-6/+7
Updates to our default function for creating bad block patterns have broken the "no OOB" feature. The NAND_BBT_NO_OOB option should not be set while scanning for bad blocks, but we've been passing all BBT options from nand_chip.bbt_options to the bad block scan. This causes us to hit the: BUG_ON(bd->options & NAND_BBT_NO_OOB); in create_bbt() when we scan the flash for bad blocks. Thus, while it can be legal to set NAND_BBT_NO_OOB in a custom badblock pattern descriptor (presumably with NAND_BBT_CREATE disabled?), we should not pass it through in our default function. Also, to help clarify and emphasize that the function creates bad block patterns only (not, for example, table descriptors for locating flash-based BBT), I renamed `nand_create_default_bbt_descr' to `nand_create_badblock_pattern'. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: wait to set BBT versionBrian Norris1-4/+8
Because there are so many cases of checking, writing, and re-writing of the bad block table(s), we might as well wait until the we've settled on a valid, clean copy of the table. This also prevents us from falsely incrementing the table version. For example, we may have the following: Primary table, with version 0x02 Mirror table, with version 0x01 Primary table has uncorrectable ECC errors If we don't have this fix applied, then we will: Choose to read the primary table (higher version) Set mirror table version to 0x02 Read back primary table Invalidate table because of ECC errors Retry readback operation with mirror table, now version 0x02 Mirrored table reads cleanly Writeback BBT to primary table location (with "version 0x02") However, the mirrored table shouldn't have a new version number. Instead, we actually want: Choose to read the primary table (higher version) Read back primary table Invalidate table because of ECC errors Retry readback with mirror table (version 0x01) Mirrored table reads cleanly Set both tables to version 0x01 Writeback BBT to primary table location (version 0x01) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: scrub BBT on ECC errorsBrian Norris1-5/+24
Now that `read_bbt()' returns ECC error codes properly, we handle those codes when checking the integrity of our flash-based BBT. The modifications can be described by this new policy: *) On any uncorrected ECC error, we invalidate the corresponding table and retry our version-checking integrity logic. *) On corrected bitflips, we mark both tables for re-writing to flash (a.k.a. scrubbing). Current integrity checks (i.e., comparing version numbers, etc.) should take care of all the cases that result in rescanning the device for bad blocks or falling back to the BBT as found in the mirror descriptor. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: nand: report ECC errors properly when reading BBTBrian Norris1-5/+12
Instead of just printing a warning when encountering ECC errors, we should return a proper error status and print a more informative warning. Later, we will handle these error messages in the upper layers of the BBT scan. Note that this patch makes our check for ECC error codes a little bit more restrictive, leaving all unrecognized errors to the generic "else" clause. This shouldn't cause problems and could even be a benefit. This code is based on some findings reported by Matthieu Castet. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: utilize `mtd_is_*()' functionsBrian Norris23-78/+78
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-21mtd: define `mtd_is_*()' functionsBrian Norris1-0/+12
These functions can be used instead of referencing -EUCLEAN and -EBADMSG all over the place. They should help make code a little bit more readable. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: remove gotos in `check_create()'Brian Norris1-16/+19
This is a second step in restructuring `check_create()'. When we don't rely on goto statements for our main functionality, the code will become a little easier to manipulate. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: begin restructuring check_createBrian Norris1-19/+5
We will begin restructuring the code for check_create so that we can make some important changes. For now, we should just begin to get rid of some goto statements to make things cleaner. This is the first step of a few, which are separated to make them easier to follow. This step should just be a code refactor. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: fix styleBrian Norris1-14/+14
Remove some extra spaces Consistently use '0x' prefix for bitfield-like constants Spelling: "aplies" -> "applies" Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: remove unnecessary variableBrian Norris1-5/+3
`writeops' is unnecessary in the function `nand_update_bbt()' Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: do not ignore all ECC errorsBrian Norris1-3/+3
There are a few reasons not to ignore ECC errors here. First, mtd->read_oob is being called in raw mode, so there should be no error correction in the first place. Second, if we change this such that there *is* error correction in this function, then we will want to pass the error message upward. In fact, the code I introduced to "ignore ECC errors" would have been better if it had just placed this test down in `scan_block_full()' in the first place. We would like to ignore ECC errors when we are simply checking for bad block markers (e.g., factory marked), but we may not want to ignore ECC errors when scanning OOB for a flash-based BBT pattern (in `scan_read_raw()'; note that the return codes from `scan_read_raw()' are not actually handled yet). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: refactor scanning codeBrian Norris1-20/+8
A few pieces of code are unnecessarily duplicated. For easier maintenance, we should fix this. This should have no functional effect. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: drop Integrator flash map KconfigLinus Walleij1-4/+0
The integrator flash has been deleted, even from the Makefile. Drop the Kconfig entry as well. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: kill old field for `struct mtd_info_user'Brian Norris2-6/+3
The ecctype and eccsize fields have been obsolete for a while. Since they don't have any users, we can kill them and leave padding in their place for now. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: kill member `ops' of `struct nand_chip'Brian Norris2-24/+25
The nand_chip.ops field is a struct that is passed around globally with no particular reason. Every time it is used, it could just as easily be replaced with a local struct that is updated on each operation. So make it local. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: document ABIBrian Norris2-14/+74
We're missing a lot of important documentation in include/mtd/mtd-abi.h: * add a simple description of each ioctl (feel free to expand!) * give full explanations of recently added and modified operations * explain the usage of "RAW" that appear in different modes and types of operations * fix some comment style along the way Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: add MEMWRITE ioctlBrian Norris2-0/+67
Implement a new ioctl for writing both page data and OOB to flash at the same time. This ioctl is intended to be a generic interface that can replace other ioctls (MEMWRITEOOB and MEMWRITEOOB64) and cover the functionality of several other old ones, e.g., MEMWRITE can: * write autoplaced OOB instead of using ECCGETLAYOUT (deprecated) and working around the reserved areas * write raw (no ECC) OOB instead of using MTDFILEMODE to set the per-file-descriptor MTD_FILE_MODE_RAW * write raw (no ECC) data instead of using MTDFILEMODE (MTD_FILE_MODE_RAW) and using standard character device "write" This ioctl is especially useful for MLC NAND, which cannot be written twice (i.e., we cannot successfully write the page data and OOB in two separate operations). Instead, MEMWRITE can write both in a single operation. Note that this ioctl is not affected by the MTD file mode (i.e., MTD_FILE_MODE_RAW vs. MTD_FILE_MODE_NORMAL), since it receives its write mode as an input parameter. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: rename MTD_MODE_* to MTD_FILE_MODE_*Brian Norris2-22/+22
These modes hold their state only for the life of their file descriptor, and they overlap functionality with the MTD_OPS_* modes. Particularly, MTD_MODE_RAW and MTD_OPS_RAW cover the same function: to provide raw (i.e., without ECC) access to the flash. In fact, although it may not be clear, MTD_MODE_RAW implied that operations should enable the MTD_OPS_RAW mode. Thus, we should be specific on what each mode means. This is a start, where MTD_FILE_MODE_* actually represents a "file mode," not necessarily a true global MTD mode. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: rename MTD_OOB_* to MTD_OPS_*Brian Norris22-97/+99
These modes are not necessarily for OOB only. Particularly, MTD_OOB_RAW affected operations on in-band page data as well. To clarify these options and to emphasize that their effect is applied per-operation, we change the primary prefix to MTD_OPS_. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: move mtd_oob_mode_t to shared kernel/user spaceBrian Norris3-17/+18
We will want to use the MTD_OOB_{PLACE,AUTO,RAW} modes in user-space applications through the introduction of new ioctls, so we should make this enum a shared type. This enum is now anonymous. Artem: tweaked the patch. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: support reading OOB without ECCBrian Norris3-7/+17
This fixes issues with `nanddump -n' and the MEMREADOOB[64] ioctls on hardware that performs error correction when reading only OOB data. A driver for such hardware needs to know when we're doing a RAW vs. a normal write, but mtd_do_read_oob does not pass such information to the lower layers (e.g., NAND). We should pass MTD_OOB_RAW or MTD_OOB_PLACE based on the MTD file mode. For now, most drivers can get away with just setting: chip->ecc.read_oob_raw = chip->ecc.read_oob This is done by default; but for systems that behave as described above, you must supply your own replacement function. This was tested with nandsim as well as on actual SLC NAND. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: document nand_chip.oob_poiBrian Norris1-1/+2
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: support writing OOB without ECCBrian Norris3-2/+14
This fixes issues with `nandwrite -n -o' and the MEMWRITEOOB[64] ioctls on hardware that writes ECC when writing OOB. The problem arises as follows: `nandwrite -n' can write page data to flash without applying ECC, but when used with the `-o' option, ECC is applied (incorrectly), contrary to the `--noecc' option. I found that this is the case because my hardware computes and writes ECC data to flash upon either OOB write or page write. Thus, to support a proper "no ECC" write, my driver must know when we're performing a raw OOB write vs. a normal ECC OOB write. However, MTD does not pass any raw mode information to the write_oob functions. This patch addresses the problems by: 1) Passing MTD_OOB_RAW down to lower layers, instead of just defaulting to MTD_OOB_PLACE 2) Handling MTD_OOB_RAW within the NAND layer's `nand_do_write_oob' 3) Adding a new (replaceable) function pointer in struct ecc_ctrl; this function should support writing OOB without ECC data. Current hardware often can use the same OOB write function when writing either with or without ECC This was tested with nandsim as well as on actual SLC NAND. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: add the common code for GPMI-NAND controller driverHuang Shijie2-0/+1892
These files contain the common code for the GPMI-NAND driver. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Koen Beel <koen.beel@barco.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: add GPMI-NAND driver in the config and MakefileHuang Shijie3-0/+17
add the GPMI-NAND driver in the relevant Kconfig and Makefile in the MTD. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Koen Beel <koen.beel@barco.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: add helper functions library and header files for GPMI NAND driverHuang Shijie3-0/+1313
bch-regs.h : registers file for BCH module gpmi-regs.h: registers file for GPMI module gpmi-lib.c: helper functions library. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Tested-by: Koen Beel <koen.beel@barco.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: check parts pointer before using itJason Liu1-3/+4
The code has the check for parts but it called after kmemdup, kmemdup(parts, sizeof(*parts) * nr_parts,...) if (!parts) return -ENOMEM In fact, we need check parts before safely using it. and we also need check the real_parts to make sure kmemdup allocation sucessfully. Signed-off-by: Jason Liu <jason.hui@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: style fixups in multi-line comment, indentationBrian Norris1-7/+9
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: nand: fix spelling error (date => data)Brian Norris1-1/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: remove MEMSETOOBSEL macro definitionBrian Norris1-1/+6
MEMSETOOBSEL is completely unused and useless. Remove the definition. Note: it's probably best not to use this ioctl number in the future for MTD, since that may cause conflicts between old kernels and new user software (or new kernels and old user software). Artem: leave a comment about MEMSETOOBSEL. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: doc: remove mention of MEMSETOOBSELBrian Norris1-14/+0
It's been gone for a while. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: do not assume oobsize is power of 2Brian Norris1-4/+4
Previous generations of MTDs all used OOB sizes that were powers of 2, (e.g., 64, 128). However, newer generations of flash, especially NAND, use irregular OOB sizes that are not powers of 2 (e.g., 218, 224, 448). This means we cannot use masks like "mtd->oobsize - 1" to assume that we will get a proper bitmask for OOB operations. These masks are really only intended to hide the "page" portion of the offset, leaving any OOB offset intact, so a masking with the writesize (which *is* always a power of 2) is valid and makes more sense. This has been tested for read/write of NAND devices (nanddump/nandwrite) using nandsim and actual NAND flash. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: mxc_nand: add mx53 NFC driver supportJason Liu1-1/+1
This has already been tested with Samsung NAND: K9LAG08U0M on MX53EVK board, ubi/ubifs has already been tested OK too. Signed-off-by: Jason Liu <jason.hui@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: bcm_umi_nand: clean up error handling codeJulia Lawall1-15/+18
Convert error handling code to use gotos. At the same time, this adds calls to kfree and iounmap in a few cases where they were overlooked. Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: eLBC NAND: update ecc_stats.corrected when lteccr availableMichael Hench1-0/+19
Signed-off-by: Michael Hench <MichaelHench@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: s3c2410 nand: Remove uncessary null checkJonghwan Choi1-1/+1
clk_get() return a pointer to the struct clk or an ERR_PTR(). Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: spelling fixesBrian Norris8-28/+28
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: use MTD_NAND_OMAP2 for OMAP4Jan Weitzel1-3/+4
use MTD_NAND_OMAP2 also for OMAP4 arch. testes with omap4430 Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 22:16:51 +0300