summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2006-01-18[PATCH] sky2: write barrier'sStephen Hemminger1-3/+2
Be more careful about memory barriers. The only place we really need them is before and after updating the chip's ring interface. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: fix ram buffer for Yukon FE rev 2Stephen Hemminger1-22/+30
Fix problems with Yukon FE rev 2 chipset. Don't cut and paste bugs in from sk98lin driver. Change how the ram buffer is divided up, and make the math clearer. Also, set the thresholds where rx takes precedence. The threshold values are just guesses at this point, it might be worth tuning them later. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: version 0.12Stephen Hemminger1-1/+1
Version update. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: call pci_set_consistent_dma_maskStephen Hemminger1-6/+11
Need to call pci_set_consistent_dma_mask in the case of 64 bit DMA. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] sky2: receive buffer alignmentStephen Hemminger1-7/+23
Need to make sure that sky2 receive buffers are 64 bit aligned. Also, don't need to start off with GFP_ATOMIC on initial setup. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] e100: e100 whitespace fixesJesse Brandeburg1-37/+37
e100: e100 whitespace fixes These are whitespace only fixes. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] e100: Handle the return values from pci_* functionsJesse Brandeburg1-7/+23
e100: Handle the return values from pci_* functions This is to resolve warnings during compile time. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[PATCH] e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue)Jesse Brandeburg1-5/+39
e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue) Set the end of list bit to cause the hardware's transmit state machine to work correctly and not prevent management (BMC) traffic. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-18[SOUND]: sparc/cs4231: Fix some typos which wrecked the build.David S. Miller1-1/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18[SPARC]: Fix sbusfb build.David S. Miller2-7/+4
sbusfb_compat_ioctl() needs to return int, not long, as that is what the fb_ops->fb_compat_ioctl method prototype wants. Need to git rid of the "struct file *file" first argument to fbiogetputcmap() and fbiogscursor() to match calls done in sbusfb_compat_ioctl(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18[TIPC] Avoid polluting the global namespacePer Liden44-1673/+1654
This patch adds a tipc_ prefix to all externally visible symbols. Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18[TIPC] Group protocols with sub-options in KconfigPer Liden1-1/+1
This is just a cosmetic change that moves the TIPC configuration entry next to the other protocols that also have sub-options. Makes the the networking options menu look a bit better. Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18[TIPC] Add help text for TIPC configuration optionPer Liden1-1/+6
Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18[TIPC] Remove unused #includesPer Liden3-4/+0
Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18[TIPC] Move ethernet protocol id to linux/if_ether.hPer Liden2-3/+3
Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18[TIPC] Provide real email addresses in MAINTAINERSPer Liden1-3/+3
Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18[TIPC] Updated link priority macrosPer Liden5-14/+25
Added macros for min/default/max link priority in tipc_config.h. Also renamed TIPC_NUM_LINK_PRI to TIPC_MEDIA_LINK_PRI since that is a more accurate description of what it is used for. Signed-off-by: Per Liden <per.liden@ericsson.com>
2006-01-18[TIPC] Minor changes to #includesJon Maloy6-6/+10
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
2006-01-18[SPARC]: change if() BUG(); to BUG_ON in iommu.cEric Sesterhenn1-7/+6
this patch changes if() BUG(); constructs in iommu.c to BUG_ON(); so it gets save to define BUG() and BUG_ON() to nullstatements. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18ARM: OMAP: 4/4 Fix clock framework to use clk_enable/disable miscTony Lindgren6-21/+21
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-18ARM: OMAP: 3/4 Fix clock framework to use clk_enable/disable for omap2Tony Lindgren2-23/+21
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-18ARM: OMAP: 2/4 Fix clock framework to use clk_enable/disable for omap1Tony Lindgren2-106/+106
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-18ARM: OMAP: 1/4 Fix clock framework to use clk_enable/disableTony Lindgren2-39/+4
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Instances of clk_use/unuse are renamed to clk_enable/disable, and references clk_use/unuse are removed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-18[SPARC64]: Eliminate race condition reading Hummingbird STICK registerRichard Mortimer1-11/+11
Ensure a consistent value is read from the STICK register by ensuring that both high and low are read without high changing due to a roll over of the low register. Various Debian/SPARC users (myself include) have noticed problems with Hummingbird based systems. The symptoms are that the system time is seen to jump forward 3 days, 6 hours, 11 minutes give or take a few seconds. In many cases the system then hangs some time afterwards. I've spotted a race condition in the code to read the STICK register. I could not work out why 3d, 6h, 11m is important but guess that it is due to the 2^32 jump of STICK (forwards on one read and then the next read will seem to be backwards) during a timer interrupt. I'm guessing that a change of -2^32 will get converted to a large unsigned increment after the arithmetic manipulation between STICK, nanoseconds, jiffies etc. I did a test where I modified __hbird_read_stick to artificially inject rollover faults forcefully every few seconds. With this I saw the clock jump over 6 times in 12 hours compared to once every month or so. Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18[NET]: Use is_zero_ether_addr() in net/core/netpoll.cKris Katterjohn1-1/+1
This replaces a memcmp() with is_zero_ether_addr(). Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18[CASSINI]: Fix printk warning.Andrew Morton1-2/+2
drivers/net/cassini.c:1930: warning: long unsigned int format, different type arg (arg 4) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18[PKTGEN]: Replacing with (compare|is_zero)_ether_addr() and ETH_ALENKris Katterjohn1-23/+11
This replaces some tests with is_zero_ether_addr(), memcmp(one, two, 6) with compare_ether_addr(one, two), and 6 with ETH_ALEN where appropriate. Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18[NET]: "signed long" -> "long"Kris Katterjohn3-8/+8
Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18[EBTABLES]: Handle SCTP/DCCP in ebt_{ip,log}Patrick McHardy2-2/+6
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-18[PKT_SCHED]: Handle SCTP/DCCP in sfq_hashPatrick McHardy1-0/+4
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-17[PATCH] libata: add a function to decide if we need iordyAlan Cox2-0/+36
This ought to be simple but for PIO2 we have to poke around the drive data to get it 100% correct. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] libata: Pre UDMA EIDE PIO mode selectionAlan Cox1-5/+9
I misread the spec when doing the original. I've tested the corrected version with pre UDMA drives and it now picks the right modes. This is a specific bug fix rather than an update or new feature item. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[libata] sata_promise: add pci idYusuf Iskenderoglu1-0/+16
2006-01-17airo: Off-by-one channel fixJavier Achirica1-10/+9
2006-01-17[libata] sata_svw: add pci idOliver Weihe1-0/+1
2006-01-17[PATCH] ahci: AHCI mode SATA patch for Intel ICH8Jason Gaston1-0/+10
This patch adds the Intel ICH8 DID's to the ahci.c file for AHCI mode SATA support. Signed-off-by:  Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Removed unused variables and initialized variablesJeff Kirsher2-2/+2
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Cleaned up code and removed hard coded numbersJeff Kirsher1-13/+21
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Added copy break codeJeff Kirsher1-12/+47
Improves small packet performance with large amounts of reassembly being done in the stack. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Added variable to handle return values for pci_enable_* functionsJeff Kirsher1-11/+33
This was to fix compilation warnings. Also added log messages when pci_enable_* functions return with an error. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Added PCIe bus informationJeff Kirsher1-0/+20
This is two patches, the first is adding additional bus information for the 8257{1|2|3} controllers. The second patch was orginally a community patch to print bus type/speed/width, and enhanced by us. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Added firmware version reporting for 8257{1|2|3} controllersJeff Kirsher1-1/+20
The EEPROM image version is reported as a firmware version for these controllers. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Added hardware support for PCI express, 82546GB, and 82571 FiberJeff Kirsher4-2/+36
Added 82571 fiber to WOL fix for dual port adapters. Added support for 82546GB (Quad Copper). Added PCIe typedef for x2, igp cable length 115, and extended TX CTRL registers. Added parity error detection and PCIe CTRL registers. Added EEPROM config registers. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Added cleaned_count to RX buffer allocationJeff Kirsher2-26/+51
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Added interrupt auto mask supportJeff Kirsher1-6/+25
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Fix Netpoll issueJeff Kirsher1-0/+3
Fixed an issue netpoll would error out during communication, generating the following error: --netdump[14973]: Got toomany timeouts in handshaking, ... Even after a kernel panic, netpoll requires two way communication to successfully transfer the crash log to the remote server. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Fixed frame size logicJeff Kirsher1-2/+2
Simplified the logic used to assign the frame_size. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Fix VLAN supportJeff Kirsher1-1/+5
Fixed VLAN support by switching control over to the firmware. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Fix __pskb_pull_tailJeff Kirsher1-8/+7
Fixed by moving code to correct location (for 82572 and 82571 controllers). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17[PATCH] e1000: Fix collision distanceJeff Kirsher3-13/+29
Fixed the collision distance for 82543 controllers and newer. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 20:08:30 +0300