summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-08-12drm/vmwgfx: select CONFIG_FBDaniel Vetter1-0/+1
vmwgfx doesn't actually build without that. It would be great if vmwgfx could switch over to the fbdev emulation helpers, since those will take care of all this already. I guess one reason to not do that was lack of defio support in the helpers, but that's fixed now. If there's any other hold-up, we should figure out what it is and whether it makes sense to address it. Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-4-git-send-email-daniel.vetter@ffwll.ch
2016-08-12drm: Remove superflous linux/fb.h includesDaniel Vetter26-28/+0
Everyone who uses the fbdev emulation helpers doesn't need to include fb.h directly. Remove it. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-3-git-send-email-daniel.vetter@ffwll.ch
2016-08-12drm/fb-helper: Add a dummy remove_conflicting_framebuffersDaniel Vetter12-11/+30
Lots of drivers don't properly compile without this when CONFIG_FB=n. It's kinda a hack, but since CONFIG_FB doesn't stub any fucntions when it's disabled I think it makes sense to add it to drm_fb_helper.h. Long term we probably need to rethink all the logic to unload firmware framebuffer drivers, at least if we want to be able to move away from CONFIG_FB and fbcon. v2: Unfortunately just stubbing out remove_conflicting_framebuffers in drm_fb_helper.h upset gcc about static vs. non-static declarations, so a new wrapper it needs to be. Means more churn :( Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: tomi.valkeinen@ti.com Cc: dh.herrmann@gmail.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-2-git-send-email-daniel.vetter@ffwll.ch
2016-08-11dma-buf/sync_file: only enable fence signalling on poll()Gustavo Padovan2-13/+10
Signalling doesn't need to be enabled at sync_file creation, it is only required if userspace waiting the fence to signal through poll(). Thus we delay fence_add_callback() until poll is called. It only adds the callback the first time poll() is called. This avoid re-adding the same callback multiple times. v2: rebase and update to work with new fence support for sync_file v3: use atomic operation to set enabled and protect fence_add_callback() v4: use user bit from fence flags (comment from Chris Wilson) v5: use ternary if on poll return (comment from Chris Wilson) Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: remove unused var status] Link: http://patchwork.freedesktop.org/patch/msgid/1470404378-27961-1-git-send-email-gustavo@padovan.org
2016-08-11Documentation: add doc for sync_file_get_fence()Gustavo Padovan1-0/+14
Document the new function added to sync_file.c v2: Adapt to fence_array v3: Take in Chris Wilson suggestions Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-08-11dma-buf/sync_file: add sync_file_get_fence()Gustavo Padovan2-0/+24
Creates a function that given an sync file descriptor returns a fence containing all fences in the sync_file. v2: Comments by Daniel Vetter - Adapt to new version of fence_collection_init() - Hold a reference for the fence we return v3: - Adapt to use fput() directly - rename to sync_file_get_fence() as we always return one fence v4: Adapt to use fence_array v5: set fence through fence_get() Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-08-11dma-buf/sync_file: refactor fence storage in struct sync_fileGustavo Padovan3-74/+129
Create sync_file->fence to abstract the type of fence we are using for each sync_file. If only one fence is present we use a normal struct fence but if there is more fences to be added to the sync_file a fence_array is created. This change cleans up sync_file a bit. We don't need to have sync_file_cb array anymore. Instead, as we always have one fence, only one fence callback is registered per sync_file. v2: Comments from Chris Wilson and Christian König - Not using fence_ops anymore - fence_is_array() was created to differentiate fence from fence_array - fence_array_teardown() is now exported and used under fence_is_array() - struct sync_file lost num_fences member v3: Comments from Chris Wilson and Christian König - struct sync_file lost status member in favor of fence_is_signaled() - drop use of fence_array_teardown() - use sizeof(*fence) to allocate only an array on fence pointers v4: Comments from Chris Wilson - use sizeof(*fence) to reallocate array - fix typo in comments - protect num_fences sum against overflows - use array->base instead of casting the to struct fence v5: fixes checkpatch warnings v6: fix case where all fences are signaled. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-08-11dma-buf/fence-array: add fence_is_array()Gustavo Padovan2-0/+11
Add helper to check if fence is array. v2: Comments from Chris Wilson - remove ternary if from ops comparison - add EXPORT_SYMBOL(fence_array_ops) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-08-09drm/dp_helper: Rate limit timeout errors from drm_dp_i2c_do_msg()Lyude1-1/+11
Timeouts can be errors, but timeouts are also usually normal behavior and happen a lot. Since the kernel already lets us know when we're suppressing messages due to rate limiting, rate limit timeout errors so we don't make too much noise in the kernel log. Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470443443-27252-8-git-send-email-cpaul@redhat.com
2016-08-09drm/dp_helper: Print first error received on failure in drm_dp_dpcd_access()Lyude1-1/+1
Since we always retry in drm_dp_dpcd_access() regardless of the error, we're going to make a lot of noise if the aux->transfer function prints it's own errors (as is the case with radeon). If we can print the error code here, this reduces the need for drivers to do this. So instead of having to print "dp_aux_ch timed out" over 32 times we can just print once. Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470443443-27252-2-git-send-email-cpaul@redhat.com
2016-08-09drm: Add ratelimited versions of the DRM_DEBUG* macrosLyude1-0/+30
There's a couple of places where this would be useful for drivers (such as reporting DP aux transaction timeouts). Signed-off-by: Lyude <cpaul@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470443443-27252-7-git-send-email-cpaul@redhat.com
2016-08-08drm: Make sure drm_vblank_no_hw_counter isn't abusedDaniel Vetter1-0/+1
Shouldn't be possible since everyone kzallocs this, but better safe than sorry. Random drive-by-idea really. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Rodrigo Vivi <rdorigo.vivi@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470673493-14304-1-git-send-email-daniel.vetter@ffwll.ch
2016-08-08drm/mediatek: Fix mtk_atomic_complete for runtime_pmBibby Hsieh1-1/+16
To properly implement atomic w/ runtime pm, we move drm_atomic_helper_commit_modeset_enables() above drm_atomic_helper_commit_planes() to ensure CRTCs are enabled before modifying plane registers, and set active_only to true to filter out plane update notifications when the CRTC is disabled. According to the document from linux kernel: Set the active_only parameters to true in order not to receive plane update notifications related to a disabled CRTC. This avoids the need to manually ignore plane updates in driver code when the driver and/or hardware can't or just don't need to deal with updates on disabled CRTCs, for example when supporting runtime PM. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-8-git-send-email-bibby.hsieh@mediatek.com
2016-08-08drm/mediatek: plane: Use FB's format's cpp to compute x offsetDaniel Kurtz1-1/+1
Use the framebuffer's format to compute its cpp, and use it when calculating the address shift value. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-7-git-send-email-bibby.hsieh@mediatek.com
2016-08-08drm/mediatek: plane: Merge mtk_plane_enable into mtk_plane_atomic_updateDaniel Kurtz1-42/+23
The mtk_plane_enable is just called once by mtk_plane_atomic_update. So, merge mtk_plane_enable into mtk_plane_atomic_update. While we are here, also clean up the function a bit by using an fb local variables. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-6-git-send-email-bibby.hsieh@mediatek.com
2016-08-08drm/mediatek: Use drm_atomic destroy_state helpersBibby Hsieh2-4/+2
Use the core destroy_state helpers to destroy core state to ensure we don't leak if/when more fields get added later. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-5-git-send-email-bibby.hsieh@mediatek.com
2016-08-08drm/mediatek: Remove mtk_drm_planeDaniel Kurtz3-25/+14
Now that mtk_drm_plane just contains its base struct drm_plane, we can just remove it and use struct drm_plane everywhere. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-4-git-send-email-bibby.hsieh@mediatek.com
2016-08-08drm/mediatek: plane: Remove plane zpos/indexDaniel Kurtz3-7/+3
It is not actually useful to a mtk plane to know its zpos/index, so just remove this field. This let's completely remove struct mtk_drm_plane in a follow up patch. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-3-git-send-email-bibby.hsieh@mediatek.com
2016-08-08drm/mediatek: Remove mtk_drm_crtc_check_flushDaniel Kurtz1-1/+0
This function no longer exists. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470279597-60453-2-git-send-email-bibby.hsieh@mediatek.com
2016-08-08drm/simple_kms_helper: Use drm_plane_helper_check_state()Ville Syrjälä1-21/+6
Replace the use of drm_plane_helper_check_update() with drm_plane_helper_check_state() since we have a plane state. I don't see any actual users of drm_simple_kms_helper yet, so no actual plane clipping bugs to fix. Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-10-git-send-email-ville.syrjala@linux.intel.com
2016-08-08drm/mediatek: Use drm_plane_helper_check_state()Ville Syrjälä1-52/+20
Replace the use of drm_plane_helper_check_update() with drm_plane_helper_check_state() since we have a plane state. This also eliminates the double clipping the driver was doing in both check and commit phases). And it should fix src coordinate addr adjustement. Previously the driver was expecting negative dst coordinates after clipping, which is not going happen, so any clipping induced addr adjustment simply didn't happen. Neither did the driver respect any user configured src coordinates, so panning and such would have been totally broken. It should be all good now. Cc: CK Hu <ck.hu@mediatek.com> Cc: linux-mediatek@lists.infradead.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Tested-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Acked-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-9-git-send-email-ville.syrjala@linux.intel.com
2016-08-08drm/rockchip: Use drm_plane_helper_check_state()Ville Syrjälä1-20/+5
Replace the use of drm_plane_helper_check_update() with drm_plane_helper_check_state() since we have a plane state. Rockchip looks to handling plane clipping rather well already (unlikje most arm drm drivers) so there are no function changes here. Cc: Yao <mark.yao@rock-chips.com> Cc: linux-rockchip@lists.infradead.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-8-git-send-email-ville.syrjala@linux.intel.com
2016-08-08drm/rockchip: Use drm_plane_state.{src, dst}Ville Syrjälä1-6/+4
Replace the private drm_rects in vop_plane_state with the ones now living in drm_plane_state. Cc: Yao <mark.yao@rock-chips.com> Cc: linux-rockchip@lists.infradead.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-7-git-send-email-ville.syrjala@linux.intel.com
2016-08-08drm/i915: Use drm_plane_helper_check_state()Ville Syrjälä3-31/+19
Replace the use of drm_plane_helper_check_update() with drm_plane_helper_check_state() since we have a plane state. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-6-git-send-email-ville.syrjala@linux.intel.com
2016-08-08drm/i915: Use drm_plane_state.{src,dst,visible}Ville Syrjälä6-155/+156
Replace the private drm_rects/flags in intel_plane_state with the ones now living in drm_plane_state. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-5-git-send-email-ville.syrjala@linux.intel.com
2016-08-08drm/plane-helper: Add drm_plane_helper_check_state()Ville Syrjälä2-32/+112
Add a version of drm_plane_helper_check_update() which takes a plane state instead of having the caller pass in everything. And to reduce code duplication, let's reimplement drm_plane_helper_check_update() in terms of the new function, by having a tempororary plane state on the stack. v2: Add a note that the functions modifies the state (Chris) v3: Fix drm_plane_helper_check_update() y coordinates (Daniel Kurtz) Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> (v2) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1470642910-14073-1-git-send-email-ville.syrjala@linux.intel.com
2016-08-08drm: Store clipped src/dst coordinatee in drm_plane_stateVille Syrjälä1-0/+13
Pretty much all driver will have need for the clipped plane coordinates, so let's stuff then into drm_plane_state. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-3-git-send-email-ville.syrjala@linux.intel.com
2016-08-08drm: Warn about negative sizes when calculating scale factorVille Syrjälä1-1/+1
Passing negative width/hight to scale factor calculations is not legal. Let's WARN if that happens. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1469549224-1860-2-git-send-email-ville.syrjala@linux.intel.com
2016-08-08drm: BIT(DRM_ROTATE_?) -> DRM_ROTATE_?Joonas Lahtinen21-111/+112
Only property creation uses the rotation as an index, so convert the to figure the index when needed. v2: Use the new defines to build the _MASK defines (Sean) Cc: intel-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: malidp@foss.arm.com Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Sean Paul <seanpaul@chromium.org> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1469771405-17653-1-git-send-email-joonas.lahtinen@linux.intel.com
2016-08-08drm: Don't prepare or cleanup unchanging frame buffers [v3]Keith Packard1-1/+9
When reconfiguring a plane position (as in moving the cursor), the frame buffer for the cursor isn't changing, so don't call the prepare or cleanup driver functions. This avoids making cursor position updates block on all pending rendering. v3: use drm_atomic_helper_framebuffer_changed in both prepare and cleanup phases instead of keeping state in the plane. cc: dri-devel@lists.freedesktop.org cc: David Airlie <airlied@linux.ie> cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com> [danvet: Rebase onto 4.8] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-08-08drm: Used DRM_LEGACY for all legacy functionsDaniel Vetter11-51/+47
Except for nouveau, only legacy drivers need this really. And nouveau is already marked up with DRIVER_KMS_LEGACY_CONTEXT as the special case. I've tried to be careful to leave everything related to modeset still using the DRIVER_MODESET flag. Otherwise it's a direct replacement of !DRIVER_MODESET with DRIVER_LEGACY checks. Also helps readability since fewer negative checks overall. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470251470-30830-2-git-send-email-daniel.vetter@ffwll.ch
2016-08-08drm: Mark up legacy/dri1 drivers with DRM_LEGACYDaniel Vetter9-11/+14
It's super confusing that new drivers need to be marked with DRIVER_MODESET when really it means DRIVER_MODERN. Much better to invert the meaning and rename it to something that's suitably off-putting. Since there's over 100 places using DRIVER_MODESET we need to roll out this change without a flag day. v2: Update docs. Reviewed-by: Frank Binns <frank.binns@imgtec.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470251470-30830-1-git-send-email-daniel.vetter@ffwll.ch
2016-08-08drm: Declare that create drm_mm nodes with size 0 is illegalChris Wilson1-0/+9
At a higher level, all objects are created with definite size i.e. 0 is illegal. In forthcoming patches, this assumption is dependent upon in the drm_mm range manager, i.e. trying to create a drm_mm node with size 0 will have undefined behaviour. Add a couple of WARNs upon creating the drm_mm node to prevent later bugs. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470248788-30873-1-git-send-email-chris@chris-wilson.co.uk
2016-08-08drm: rename DRM_MINOR_LEGACY to DRM_MINOR_PRIMARYDavid Herrmann2-9/+9
The minor referred to by "DRM_MINOR_LEGACY" is called 'dev->primary' and gets 'cardX' as name assigned. Lets reduce this magnificent number of names for the same concept by one and rename DRM_MINOR_LEGACY to DRM_MINOR_PRIMARY (to match the actual struct-member name). Furthermore, this is in no way a legacy node, so lets not call it that. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160803180432.1341-2-dh.herrmann@gmail.com
2016-08-08drm: Skip initialising the drm_mm_node->hole_stackChris Wilson1-5/+1
As we always add this to the drm_mm->hole_stack as our first operation, we do not need to initialise the list node. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470236651-678-3-git-send-email-chris@chris-wilson.co.uk
2016-08-08drm: Convert drm_vma_manager to embedded interval-tree in drm_mmChris Wilson2-36/+9
Having added an interval-tree to struct drm_mm, we can replace the auxiliary rb-tree inside the drm_vma_manager with it. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470236651-678-2-git-send-email-chris@chris-wilson.co.uk
2016-08-08drm: Track drm_mm nodes with an interval treeChris Wilson2-23/+122
In addition to the last-in/first-out stack for accessing drm_mm nodes, we occasionally and in the future often want to find a drm_mm_node by an address. To do so efficiently we need to track the nodes in an interval tree - lookups for a particular address will then be O(lg(N)), where N is the number of nodes in the range manager as opposed to O(N). Insertion however gains an extra O(lg(N)) step for all nodes irrespective of whether the interval tree is in use. For future i915 patches, eliminating the linear walk is a significant improvement. v2: Use generic interval-tree template for u64 and faster insertion. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470236651-678-1-git-send-email-chris@chris-wilson.co.uk
2016-08-08drm: Avoid printing negative values for unsigned variables.Rodrigo Vivi1-5/+5
It was really strange to see negative vblank seqs on debug messages. It is rare to have that big number, but when it happens it is confusing and misleading. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470243226-2750-1-git-send-email-rodrigo.vivi@intel.com
2016-08-08Linux 4.8-rc1Linus Torvalds1-2/+2
2016-08-08Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds62-213/+213
Pull more block fixes from Jens Axboe: "As mentioned in the pull the other day, a few more fixes for this round, all related to the bio op changes in this series. Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I wanted to do that change right after or right before -rc1, so that risk of conflict was reduced. I just rebased the series on top of current master, and no new ->bi_rw usage has snuck in" * 'for-linus' of git://git.kernel.dk/linux-block: block: rename bio bi_rw to bi_opf target: iblock_execute_sync_cache() should use bio_set_op_attrs() mm: make __swap_writepage() use bio_set_op_attrs() block/mm: make bdev_ops->rw_page() take a bool for read/write
2016-08-08Merge tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds22-156/+334
Pull drm zpos property support from Dave Airlie: "This tree was waiting on some media stuff I hadn't had time to get a stable branchpoint off, so I just waited until it was all in your tree first. It's been around a bit on the list and shouldn't affect anything outside adding the generic API and moving some ARM drivers to using it" * tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux: drm: rcar: use generic code for managing zpos plane property drm/exynos: use generic code for managing zpos plane property drm: sti: use generic zpos for plane drm: add generic zpos property
2016-08-07block: rename bio bi_rw to bi_opfJens Axboe51-157/+158
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07target: iblock_execute_sync_cache() should use bio_set_op_attrs()Jens Axboe1-1/+1
The original commit missed this function, it needs to mark it a write flush. Cc: Mike Christie <mchristi@redhat.com> Fixes: e742fc32fcb4 ("target: use bio op accessors") Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07mm: make __swap_writepage() use bio_set_op_attrs()Jens Axboe1-2/+3
Cleaner than manipulating bio->bi_rw flags directly. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07block/mm: make bdev_ops->rw_page() take a bool for read/writeJens Axboe11-53/+51
Commit abf545484d31 changed it from an 'rw' flags type to the newer ops based interface, but now we're effectively leaking some bdev internals to the rest of the kernel. Since we only care about whether it's a read or a write at that level, just pass in a bool 'is_write' parameter instead. Then we can also move op_is_write() and friends back under CONFIG_BLOCK protection. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07Merge tag 'doc-4.8-fixes' of git://git.lwn.net/linuxLinus Torvalds16-34/+31
Pull documentation fixes from Jonathan Corbet: "Three fixes for the docs build, including removing an annoying warning on 'make help' if sphinx isn't present" * tag 'doc-4.8-fixes' of git://git.lwn.net/linux: DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1 Documenation: update cgroup's document path Documentation/sphinx: do not warn about missing tools in 'make help'
2016-08-07Merge tag 'binfmt-for-linus' of ↵Linus Torvalds4-2/+67
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc Pull binfmt_misc update from James Bottomley: "This update is to allow architecture emulation containers to function such that the emulation binary can be housed outside the container itself. The container and fs parts both have acks from relevant experts. To use the new feature you have to add an F option to your binfmt_misc configuration" From the docs: "The usual behaviour of binfmt_misc is to spawn the binary lazily when the misc format file is invoked. However, this doesn't work very well in the face of mount namespaces and changeroots, so the F mode opens the binary as soon as the emulation is installed and uses the opened image to spawn the emulator, meaning it is always available once installed, regardless of how the environment changes" * tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc: binfmt_misc: add F option description to documentation binfmt_misc: add persistent opened binary handler for containers fs: add filp_clone_open API
2016-08-07fs: return EPERM on immutable inodeEryu Guan4-4/+5
In most cases, EPERM is returned on immutable inode, and there're only a few places returning EACCES. I noticed this when running LTP on overlayfs, setxattr03 failed due to unexpected EACCES on immutable inode. So converting all EACCES to EPERM on immutable inode. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-07Merge branch 'for-linus-2' of ↵Linus Torvalds32-130/+82
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted cleanups and fixes. In the "trivial API change" department - ->d_compare() losing 'parent' argument" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cachefiles: Fix race between inactivating and culling a cache object 9p: use clone_fid() 9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()" vfs: make dentry_needs_remove_privs() internal vfs: remove file_needs_remove_privs() vfs: fix deadlock in file_remove_privs() on overlayfs get rid of 'parent' argument of ->d_compare() cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare() affs ->d_compare(): don't bother with ->d_inode fold _d_rehash() and __d_rehash() together fold dentry_rcuwalk_invalidate() into its only remaining caller
2016-08-06Merge tag 'xfs-rmap-for-linus-4.8-rc1' of ↵Linus Torvalds64-915/+6267
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull more xfs updates from Dave Chinner: "This is the second part of the XFS updates for this merge cycle, and contains the new reverse block mapping feature for XFS. Reverse mapping allows us to track the owner of a specific block on disk precisely. It is implemented as a set of btrees (one per allocation group) that track the owners of allocated extents. Effectively it is a "used space tree" that is updated when we allocate or free extents. i.e. it is coherent with the free space btrees we already maintain and never overlaps with them. This reverse mapping infrastructure is the building block of several upcoming features - reflink, copy-on-write data, dedupe, online metadata and data scrubbing, highly accurate bad sector/data loss reporting to users, and significantly improved reconstruction of damaged and corrupted filesystems. There's a lot of new stuff coming along in the next couple of cycles,a nd it all builds in the rmap infrastructure. As such, it's a huge chunk of new code with new on-disk format features and internal infrastructure. It warns at mount time as an experimental feature and that it may eat data (as we do with all new on-disk features until they stabilise). We have not released userspace suport for it yet - userspace support currently requires download from Darrick's xfsprogs repo and build from source, so the access to this feature is really developer/tester only at this point. Initial userspace support will be released at the same time kernel with this code in it is released. The new rmap enabled code regresses 3 xfstests - all are ENOSPC related corner cases, one of which Darrick posted a fix for a few hours ago. The other two are fixed by infrastructure that is part of the upcoming reflink patchset. This new ENOSPC infrastructure requires a on-disk format tweak required to keep mount times in check - we need to keep an on-disk count of allocated rmapbt blocks so we don't have to scan the entire btrees at mount time to count them. This is currently being tested and will be part of the fixes sent in the next week or two so users will not be exposed to this change" * tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (52 commits) xfs: move (and rename) the deferred bmap-free tracepoints xfs: collapse single use static functions xfs: remove unnecessary parentheses from log redo item recovery functions xfs: remove the extents array from the rmap update done log item xfs: in btree_lshift, only allocate temporary cursor when needed xfs: remove unnecesary lshift/rshift key initialization xfs: remove the get*keys and update_keys btree ops pointers xfs: enable the rmap btree functionality xfs: don't update rmapbt when fixing agfl xfs: disable XFS_IOC_SWAPEXT when rmap btree is enabled xfs: add rmap btree block detection to log recovery xfs: add rmap btree geometry feature flag xfs: propagate bmap updates to rmapbt xfs: enable the xfs_defer mechanism to process rmaps to update xfs: log rmap intent items xfs: create rmap update intent log items xfs: add rmap btree insert and delete helpers xfs: convert unwritten status of reverse mappings xfs: remove an extent from the rmap btree xfs: add an extent to the rmap btree ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 19:44:20 +0300