| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 60e3f6e4ac5b0fda43dad01c32e09409ec710045 upstream.
Reviewing a fresh portion of coverity defects in USB core
(specifically CID 1458999), Alan Stern noted below in [1]:
On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote:
> A revised search finds line 997 in drivers/usb/core/hub.c and lines
> 216, 269 in drivers/usb/core/port.c. (I didn't try looking in any
> other directories.) AFAICT all three of these should check the
> return value, although a error message in the kernel log probably
> isn't needed.
Factor out the usb_remove_device() change into a standalone patch to
allow conflict-free integration on top of the earliest stable branches.
[1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.2002251419120.1485-100000@iolanthe.rowland.org
Fixes: 253e05724f9230 ("USB: add a "remove hardware" sysfs attribute")
Cc: stable@vger.kernel.org # v2.6.33+
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200226175036.14946-2-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63d6d7ed475c53dc1cabdfedf63de1fd8dcd72ee upstream.
Address below Coverity complaint (Feb 25, 2020, 8:06 AM CET):
|
|
commit 4bf2dd65135a2d7fe202f7c10d65b51bcf645ac6 upstream.
If there are TRBs pending during reset endpoint operation, the
DMA will advance after reset operation, but it isn't expected,
since the data is not yet available (For OUT, the data is not
yet available). After the data is ready, there won't be any
interrupt since the EP_TRADDR already points to next TRB entry
and doorbell is not set.
To fix it, it toggles cycle bit before reset operation, and restores
it after reset, it could avoid unexpected DMA advance due to
cycle bit is for software during the endpoint reset operation.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200219141455.23257-3-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a7c47fb7285b23ca259c888016513d5566fa9e8 upstream.
It has marked the dequeue trb as link trb, but its next segment
pointer is still itself, it causes the transfer can't go on. Fix
it by set its pointer as the trb address for the next request.
Fixes: f616c3bda47e ("usb: cdns3: Fix dequeue implementation")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200219141455.23257-2-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dad2aff3e827b112f27fa5e6f2bf87a110067c3f upstream.
If scatter-gather operation is allowed, a large USB request is split
into multiple TRBs. For preparing TRBs for sg list, driver iterates
over the list and creates TRB for each sg and mark the chain bit to
false for the last sg. The current IOMMU driver is clubbing the list
of sgs which shares a page boundary into one and giving it to USB driver.
With this the number of sgs mapped it not equal to the the number of sgs
passed. Because of this USB driver is not marking the chain bit to false
since it couldn't iterate to the last sg. This patch addresses this issue
by marking the chain bit to false if it is the last mapped sg.
At a practical level, this patch resolves USB transfer stalls
seen with adb on dwc3 based db845c, pixel3 and other qcom
hardware after functionfs gadget added scatter-gather support
around v4.20.
Credit also to Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
who implemented a very similar fix to this issue.
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Yang Fei <fei.yang@intel.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Tejas Joglekar <tejas.joglekar@synopsys.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linux USB List <linux-usb@vger.kernel.org>
Cc: stable <stable@vger.kernel.org> #4.20+
Signed-off-by: Pratham Pratap <prathampratap@codeaurora.org>
[jstultz: Slight tweak to remove sg_is_last() usage, reworked
commit message, minor comment tweak]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200302214443.55783-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b96ed52d781a2026d0c0daa5787c6f3d45415862 upstream.
LPM on the device appears to cause xHCI host controllers to claim
that there isn't enough bandwidth to support additional devices.
Signed-off-by: Dan Lazewatsky <dlaz@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://lore.kernel.org/r/20200226143438.1445-1-gustavo.padovan@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86d92f5465958752481269348d474414dccb1552 upstream.
Current driver has 240 (USB2.0) and 2048 (USB3.0) as max_sectors,
e.g., /sys/bus/scsi/devices/0:0:0:0/max_sectors
If data access times out, driver error handling will issue a port
reset.
Sometimes Samsung Fit (090C:1000) flash disk will not respond to
later Set Address or Get Descriptor command.
Adding this quirk to limit max_sectors to 64 sectors to avoid issue
occurring.
Signed-off-by: Jim Lin <jilin@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1583158895-31342-1-git-send-email-jilin@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86f740f2aed5ea7fe1aa86dc2df0fb4ab0f71088 upstream.
To rename a file in SMB2 we open it with the DELETE access and do a
special SetInfo on it. If the handle is missing the DELETE bit the
server will fail the SetInfo with STATUS_ACCESS_DENIED.
We currently try to reuse any existing opened handle we have with
cifs_get_writable_path(). That function looks for handles with WRITE
access but doesn't check for DELETE, making rename() fail if it finds
a handle to reuse. Simple reproducer below.
To select handles with the DELETE bit, this patch adds a flag argument
to cifs_get_writable_path() and find_writable_file() and the existing
'bool fsuid_only' argument is converted to a flag.
The cifsFileInfo struct only stores the UNIX open mode but not the
original SMB access flags. Since the DELETE bit is not mapped in that
mode, this patch stores the access mask in cifs_fid on file open,
which is accessible from cifsFileInfo.
Simple reproducer:
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#define E(s) perror(s), exit(1)
int main(int argc, char *argv[])
{
int fd, ret;
if (argc != 3) {
fprintf(stderr, "Usage: %s A B\n"
"create&open A in write mode, "
"rename A to B, close A\n", argv[0]);
return 0;
}
fd = openat(AT_FDCWD, argv[1], O_WRONLY|O_CREAT|O_SYNC, 0666);
if (fd == -1) E("openat()");
ret = rename(argv[1], argv[2]);
if (ret) E("rename()");
ret = close(fd);
if (ret) E("close()");
return ret;
}
$ gcc -o bugrename bugrename.c
$ ./bugrename /mnt/a /mnt/b
rename(): Permission denied
Fixes: 8de9e86c67ba ("cifs: create a helper to find a writeable handle by path name")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc513fac56e1b626ae48a74d7551d9c35c50129e upstream.
If from cifs_revalidate_dentry_attr() the SMB2/QUERY_INFO call fails with an
error, such as STATUS_SESSION_EXPIRED, causing the session to be reconnected
it is possible we will leak -EAGAIN back to the application even for
system calls such as stat() where this is not a valid error.
Fix this by re-trying the operation from within cifs_revalidate_dentry_attr()
if cifs_get_inode_info*() returns -EAGAIN.
This fixes stat() and possibly also other system calls that uses
cifs_revalidate_dentry*().
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8b33a134a9cc2a501f8fc731d91caef39237d495 upstream.
A headset on the laptop like ASUS B9450FA does not work, until quirk
ALC294_FIXUP_ASUS_HPE is applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200225072920.109199-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d45e86d2267d5bdf7bbb631499788da1c27ceb2 upstream.
The Gigabyte X570 Aorus Master motherboard with ALC1220 codec
requires a similar workaround for Clevo laptops to enforce the
DAC/mixer connection path. Set up a quirk entry for that.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200223092416.15016-2-gladiac@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 76f7dec08fd64e9e3ad0810a1a8a60b0a846d348 upstream.
ThinkPad want to support Headset Button control.
This patch will enable it.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/7f0b7128f40f41f6b5582ff610adc33d@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 78def224f59c05d00e815be946ec229719ccf377 upstream.
Dell desktop platform supported headset Mic.
Add pin verb to enable headset Mic.
This platform only support fixed type headset for Iphone type.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b9da28d772ef43088791b0f3675929e7@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f0fe2c0f050d31babcad7d65f1d550d462a40064 upstream.
This is a necessary follow up to the first fix I proposed and we merged
in 2669b8b0c79 ("binder: prevent UAF for binderfs devices"). I have been
overly optimistic that the simple fix I proposed would work. But alas,
ihold() + iput() won't work since the inodes won't survive the
destruction of the superblock.
So all we get with my prior fix is a different race with a tinier
race-window but it doesn't solve the issue. Fwiw, the problem lies with
generic_shutdown_super(). It even has this cozy Al-style comment:
if (!list_empty(&sb->s_inodes)) {
printk("VFS: Busy inodes after unmount of %s. "
"Self-destruct in 5 seconds. Have a nice day...\n",
sb->s_id);
}
On binder_release(), binder_defer_work(proc, BINDER_DEFERRED_RELEASE) is
called which punts the actual cleanup operation to a workqueue. At some
point, binder_deferred_func() will be called which will end up calling
binder_deferred_release() which will retrieve and cleanup the
binder_context attach to this struct binder_proc.
If we trace back where this binder_context is attached to binder_proc we
see that it is set in binder_open() and is taken from the struct
binder_device it is associated with. This obviously assumes that the
struct binder_device that context is attached to is _never_ freed. While
that might be true for devtmpfs binder devices it is most certainly
wrong for binderfs binder devices.
So, assume binder_open() is called on a binderfs binder devices. We now
stash away the struct binder_context associated with that struct
binder_devices:
proc->context = &binder_dev->context;
/* binderfs stashes devices in i_private */
if (is_binderfs_device(nodp)) {
binder_dev = nodp->i_private;
info = nodp->i_sb->s_fs_info;
binder_binderfs_dir_entry_proc = info->proc_log_dir;
} else {
.
.
.
proc->context = &binder_dev->context;
Now let's assume that the binderfs instance for that binder devices is
shutdown via umount() and/or the mount namespace associated with it goes
away. As long as there is still an fd open for that binderfs binder
device things are fine. But let's assume we now close the last fd for
that binderfs binder device. Now binder_release() is called and punts to
the workqueue. Assume that the workqueue has quite a bit of stuff to do
and doesn't get to cleaning up the struct binder_proc and the associated
struct binder_context with it for that binderfs binder device right
away. In the meantime, the VFS is killing the super block and is
ultimately calling sb->evict_inode() which means it will call
binderfs_evict_inode() which does:
static void binderfs_evict_inode(struct inode *inode)
{
struct binder_device *device = inode->i_private;
struct binderfs_info *info = BINDERFS_I(inode);
clear_inode(inode);
if (!S_ISCHR(inode->i_mode) || !device)
return;
mutex_lock(&binderfs_minors_mutex);
--info->device_count;
ida_free(&binderfs_minors, device->miscdev.minor);
mutex_unlock(&binderfs_minors_mutex);
kfree(device->context.name);
kfree(device);
}
thereby freeing the struct binder_device including struct
binder_context.
Now the workqueue finally has time to get around to cleaning up struct
binder_proc and is now trying to access the associate struct
binder_context. Since it's already freed it will OOPs.
Fix this by introducing a refounct on binder devices.
This is an alternative fix to 51d8a7eca677 ("binder: prevent UAF read in
print_binder_transaction_log_entry()").
Fixes: 3ad20fe393b3 ("binder: implement binderfs")
Fixes: 2669b8b0c798 ("binder: prevent UAF for binderfs devices")
Fixes: 03e2e07e3814 ("binder: Make transaction_log available in binderfs")
Related : 51d8a7eca677 ("binder: prevent UAF read in print_binder_transaction_log_entry()")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20200303164340.670054-1-christian.brauner@ubuntu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2669b8b0c798fbe1a31d49e07aa33233d469ad9b upstream.
On binder_release(), binder_defer_work(proc, BINDER_DEFERRED_RELEASE) is
called which punts the actual cleanup operation to a workqueue. At some
point, binder_deferred_func() will be called which will end up calling
binder_deferred_release() which will retrieve and cleanup the
binder_context attach to this struct binder_proc.
If we trace back where this binder_context is attached to binder_proc we
see that it is set in binder_open() and is taken from the struct
binder_device it is associated with. This obviously assumes that the
struct binder_device that context is attached to is _never_ freed. While
that might be true for devtmpfs binder devices it is most certainly
wrong for binderfs binder devices.
So, assume binder_open() is called on a binderfs binder devices. We now
stash away the struct binder_context associated with that struct
binder_devices:
proc->context = &binder_dev->context;
/* binderfs stashes devices in i_private */
if (is_binderfs_device(nodp)) {
binder_dev = nodp->i_private;
info = nodp->i_sb->s_fs_info;
binder_binderfs_dir_entry_proc = info->proc_log_dir;
} else {
.
.
.
proc->context = &binder_dev->context;
Now let's assume that the binderfs instance for that binder devices is
shutdown via umount() and/or the mount namespace associated with it goes
away. As long as there is still an fd open for that binderfs binder
device things are fine. But let's assume we now close the last fd for
that binderfs binder device. Now binder_release() is called and punts to
the workqueue. Assume that the workqueue has quite a bit of stuff to do
and doesn't get to cleaning up the struct binder_proc and the associated
struct binder_context with it for that binderfs binder device right
away. In the meantime, the VFS is killing the super block and is
ultimately calling sb->evict_inode() which means it will call
binderfs_evict_inode() which does:
static void binderfs_evict_inode(struct inode *inode)
{
struct binder_device *device = inode->i_private;
struct binderfs_info *info = BINDERFS_I(inode);
clear_inode(inode);
if (!S_ISCHR(inode->i_mode) || !device)
return;
mutex_lock(&binderfs_minors_mutex);
--info->device_count;
ida_free(&binderfs_minors, device->miscdev.minor);
mutex_unlock(&binderfs_minors_mutex);
kfree(device->context.name);
kfree(device);
}
thereby freeing the struct binder_device including struct
binder_context.
Now the workqueue finally has time to get around to cleaning up struct
binder_proc and is now trying to access the associate struct
binder_context. Since it's already freed it will OOPs.
Fix this by holding an additional reference to the inode that is only
released once the workqueue is done cleaning up struct binder_proc. This
is an easy alternative to introducing separate refcounting on struct
binder_device which we can always do later if it becomes necessary.
This is an alternative fix to 51d8a7eca677 ("binder: prevent UAF read in
print_binder_transaction_log_entry()").
Fixes: 3ad20fe393b3 ("binder: implement binderfs")
Fixes: 03e2e07e3814 ("binder: Make transaction_log available in binderfs")
Related : 51d8a7eca677 ("binder: prevent UAF read in print_binder_transaction_log_entry()")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 26d0fba29c96241de8a9d16f045b1de49875884c upstream.
SCU requires that all messages words are written sequentially but linux MU
driver implements multiple independent channels for each register so ordering
between different channels must be ensured by SCU API interface.
Wait for tx_done before every send to ensure that no queueing happens at the
mailbox channel level.
Fixes: edbee095fafb ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by:: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9b64208f74fbd0e920475ecfe9326f8443fdc3a5 ]
0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid
that. 0x14 and 0x18 would be better and works as well.
Reported-by: Petr Machata <petrm@mellanox.com>
Fixes: 4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bebd26ab623616728d6e72b5c74a47bfff5287d8 ]
Fix wording in help text for the CPU_HAS_LDSTEX symbol.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2305f60b76110cb3e8658a4ae85d1f7eb0c66a5b ]
Implement fstat64, fstatat64, clone3 syscalls to fixup
checksyscalls.sh compile warnings.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 359ae00d12589c31cf103894d0f32588d523ca83 ]
During ftrace init, linux will replace all function prologues
(call_mcout) with nops, but it need flush_dcache and
invalidate_icache to make it work. So flush_cache functions
couldn't be nested called by ftrace framework.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c9492737b25ca32679ba3163609d938c9abfd508 ]
If we use a non-ipi-support interrupt controller, it will cause panic here.
We should let cpu up and work with CONFIG_SMP, when we use a non-ipi intc.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8e17c17b81070f38062dce79ca7f4541851dadd ]
In the past, we didn't care about kernel sp when saving pt_reg. But in some
cases, we still need pt_reg->usp to represent the kernel stack before enter
exception.
For cmpxhg in atomic.S, we need save and restore usp for above.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f4a567332f035ab16b29010fbd04a0f10183c77 ]
There is no present bit in csky pmd hardware, so we need to prepare invalid_pte_table
for empty pmd entry and the functions (pmd_none & pmd_present) in pgtable.h need
invalid_pte_talbe to get result. If a module use these functions, we need export the
symbol for it.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Mo Qihui <qihui.mo@verisilicon.com>
Cc: Zhange Jian <zhang_jian5@dahuatech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 971617c3b761c876d686a2188220a33898c90e99 ]
While it is not yet understood why a TX underflow can easily occur
for SGMII interfaces resulting in a TX wedge. It has been found that
disabling/re-enabling the LMAC resolves the issue.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Robert Jones <rjones@gateworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9038ec99ceb94fb8d93ade5e236b2928f0792c7c ]
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
arch/x86/xen/enlighten_pv.c: In function ‘xen_write_msr_safe’:
arch/x86/xen/enlighten_pv.c:904:12: warning: statement will never be executed [-Wswitch-unreachable]
904 | unsigned which;
| ^~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200220062318.69299-1-keescook@chromium.org
Reviewed-by: Juergen Gross <jgross@suse.com>
[boris: made @which an 'unsigned int']
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a55c08d3bbc9ffc9639f69f742e59ebd99f913b ]
Remove code that tell the OS that link is going down when user
change flow control via ethtool. When link is up it isn't certain
that link goes down after 0x0605 aq command. If link doesn't go
down, OS thinks that link is down, but physical link is up. To
reset this state user have to take interface down and up.
If link goes down after 0x0605 command, FW send information
about that and after that driver tells the OS that the link goes
down. So this code in ethtool is unnecessary.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15755854d53b4bbb0bb37a0fce66f0156cfc8a17 ]
gcc may detect a false positive on nvme using an unintialized variable
if setting features fails. Since this is not a fast path, explicitly
initialize this variable to suppress the warning.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9091ffd6a0aaced111b5d6ead5eaab5cd7101bc ]
As the comment says, sl->sbal holds an absolute address. qeth currently
solves this through wild casting, while zfcp doesn't care.
Handle this properly in the code that actually builds the SL.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio]
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit df6d4f9db79c1a5d6f48b59db35ccd1e9ff9adfc ]
GCC 10 changed the default to -fno-common, which leads to
LD arch/x86/boot/compressed/vmlinux
ld: arch/x86/boot/compressed/pgtable_64.o:(.bss+0x0): multiple definition of `__force_order'; \
arch/x86/boot/compressed/kaslr_64.o:(.bss+0x0): first defined here
make[2]: *** [arch/x86/boot/compressed/Makefile:119: arch/x86/boot/compressed/vmlinux] Error 1
Since __force_order is already provided in pgtable_64.c, there is no
need to declare __force_order in kaslr_64.c.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200124181811.4780-1-hjl.tools@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98f7b86a0becc1154b1a6df6e75c9695dfd87e0d ]
People reported that old Apple machines are not working properly
if the non-first IRQ vector is in use.
Set quirk for that models to limit IRQ to use first vector only.
Based on original patch by GitHub user npx001.
Link: https://github.com/Dunedan/mbp-2016-linux/issues/9
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1fae37accfc5872af3905d4ba71dc6ab15829be7 ]
The Samsung SSD SM981/PM981 and Toshiba SSD KBG40ZNT256G on the Lenovo
C640 platform experience runtime resume issues when the SSDs are kept in
sleep/suspend mode for long time.
This patch applies the 'Simple Suspend' quirk to these configurations.
With this patch, the issue had not been observed in a 1+ day test.
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shyjumon N <shyjumon.n@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3dfee47b215e49788cfc80e474820ea2e948c031 ]
Serious screen flickering when Stoney Ridge outputs to a 4K monitor.
Use identity-mapping and PCI ATS doesn't help this issue.
According to Alex Deucher, IOMMU isn't enabled on Windows, so let's do
the same here to avoid screen flickering on 4K monitor.
Cc: Alex Deucher <alexander.deucher@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/issues/961
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52d214976d4f64504c1bbb52d47b46a5a3d5ee42 ]
Set vport gvmi in the tag, only when source gvmi is set in the bit mask.
Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3be54d558c75562e42bc83d665df024bd79d399b ]
If CONFIG_LOAD_UEFI_KEYS is enabled, the kernel attempts to load the certs
from the db, dbx and MokListRT EFI variables into the appropriate keyrings.
But it just assumes that the variables will be present and prints an error
if the certs can't be loaded, even when is possible that the variables may
not exist. For example the MokListRT variable will only be present if shim
is used.
So only print an error message about failing to get the certs list from an
EFI variable if this is found. Otherwise these printed errors just pollute
the kernel log ring buffer with confusing messages like the following:
[ 5.427251] Couldn't get size: 0x800000000000000e
[ 5.427261] MODSIGN: Couldn't get UEFI db list
[ 5.428012] Couldn't get size: 0x800000000000000e
[ 5.428023] Couldn't get UEFI MokListRT
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 94e90f727f7424d827256023cace829cad6896f4 ]
For the same reason as commit 19514fc665ff ("arm, kbuild: make "make
install" not depend on vmlinux"), the install targets should never
trigger the rebuild of the kernel.
The variable, CONFIGURE, is not set by anyone. Remove it as well.
Link: https://lkml.kernel.org/r/20200216144829.27023-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b101a5e14f2161869636ff9cb4907b7749dc0c2 ]
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283
Link: https://lore.kernel.org/r/d44c53a7-9bc1-15c7-6d4a-0c10cb9dffce@virtuozzo.com
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9a0e65eda3f78d0b04ec6136c591c000cbc3b76 ]
The da9062 hw has a minimum ping cool down phase of at least 200ms. The
driver takes that into account by setting the min_hw_heartbeat_ms to
300ms and the core guarantees that the hw limit is observed for the
ping() calls. But the core can't guarantee the required minimum ping
cool down phase if a stop() command is send immediately after the ping()
command. So it is not allowed to ping the watchdog within the stop()
command as the driver does. Remove the ping can be done without doubts
because the watchdog gets disabled anyway and a (re)start resets the
watchdog counter too.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de
[groeck: Updated description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a6a0dea16177ccaecc116f560232e63bec115f1 ]
The call to of_get_mac_address() can return -EPROBE_DEFER, for instance
when the MAC address is read from a NVMEM driver that did not probe yet.
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 58292104832fef6cb4a89f736012c0e0724c3442 ]
The Micrel KSZ8851-16MLLI datasheet DS00002357B page 12 states that
BE[3:0] signals are active high. This contradicts the measurements
of the behavior of the actual chip, where these signals behave as
active low. For example, to read the CIDER register, the bus must
expose 0xc0c0 during the address phase, which means BE[3:0]=4'b1100.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit edacb098ea9c31589276152f09b4439052c0f2b1 ]
The packet data written to and read from Micrel KSZ8851-16MLLI must be
byte-swapped in 16-bit mode, add this byte-swapping.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 69233bba6543a37755158ca3382765387b8078df ]
This driver is mixing 8-bit and 16-bit bus accessors for reasons unknown,
however the speculation is that this was some sort of attempt to support
the 8-bit bus mode.
As per the KS8851-16MLL documentation, all two registers accessed via the
8-bit accessors are internally 16-bit registers, so reading them using
16-bit accessors is fine. The KS_CCR read can be converted to 16-bit read
outright, as it is already a concatenation of two 8-bit reads of that
register. The KS_RXQCR accesses are 8-bit only, however writing the top
8 bits of the register is OK as well, since the driver caches the entire
16-bit register value anyway.
Finally, the driver is not used by any hardware in the kernel right now.
The only hardware available to me is one with 16-bit bus, so I have no
way to test the 8-bit bus mode, however it is unlikely this ever really
worked anyway. If the 8-bit bus mode is ever required, it can be easily
added by adjusting the 16-bit accessors to do 2 consecutive accesses,
which is how this should have been done from the beginning.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e7b5f97e6574dc4918e375d5f8d24ec31653cd6d ]
Artificial HW reliability tests revealed a possible hangup in
the driver. Normally, when device disappears from bus, all
register reads returns 0xFFFFFFFF.
At remote procedure invocation towards FW there is a logic
where result is compared with -1 in a loop.
That caused an infinite loop if hardware due to some issues
disappears from bus.
Add extra result checks to prevent this.
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e867c9a50ff1a07ed0b86c3b1c8bc773933d728 ]
After commit 71130f29979c ("vxlan: fix tos value before xmit") we start
strict vxlan xmit tos value by RT_TOS(), which limits the tos value less
than 0x1E. With current value 0x40 the test will failed with "v1: Expected
to capture 10 packets, got 0". So let's choose a smaller tos value for
testing.
Fixes: d417ecf533fe ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8023b030ce1748930e2dc76353a262fe47d4745 ]
For tc ip_proto filter, when we extract the flow via __skb_flow_dissect()
without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to
the inner proto.
So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP
proto.
For test mirror_gre.sh, it may make user confused if we capture ICMP
message on $h3(since the flow is GRE message). So I move the capture
dev to h3-gt{4,6}, and only capture ICMP message.
Before the fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
After fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
Fixes: ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <pmachata@gmail.com>
Tested-by: Petr Machata <pmachata@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c6659785dfb3f8d75f1fe637e4222ff8178f5280 ]
For a given byte clock, if VCO recalc value is exactly same as
vco set rate value, vco_set_rate does not get called assuming
VCO is already set to required value. But Due to GDSC toggle,
VCO values are erased in the HW. To make sure VCO is programmed
correctly, we forcefully call set_rate from vco_prepare.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a1028dcfd0dd97884072288d0c8ed7f30399b528 ]
Save pll state before dsi host is powered off. Without this change
some register values gets resetted.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e99b2c625da181aebf1a3d13493e3f7a5057a9c ]
Add a flag to DMA memory allocation to silence a warning.
This driver allocates DMA memory for IO frames. This allocation may exceed
MAX_ORDER pages for few megaraid_sas controllers (controllers with very
high queue depth). Consequently, the driver has logic to keep reducing the
controller queue depth until the DMA memory allocation succeeds.
On impacted megaraid_sas controllers there would be multiple DMA allocation
failures until driver settled on an allocation that fit. These failed DMA
allocation requests caused stack traces in system logs. These were not
harmful and this patch silences those warnings/stack traces.
[mkp: clarified commit desc]
Link: https://lore.kernel.org/r/20200204152413.7107-1-thenzl@redhat.com
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c320b6ce7510653bce68cecf80cf5b2d67e907f ]
At the moment, only DRM_MODE_ROTATE_180 is allowed when we try to apply
the rotation from the video mode parameters. It is also useful to allow
DRM_MODE_ROTATE_0 in case there is only a reflect option in the video mode
parameter (e.g. video=540x960,reflect_x).
DRM_MODE_ROTATE_0 means "no rotation" and should therefore not require
any special handling, so we can just add it to the if condition.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117153429.54700-3-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6980a727154b793adb218fbc7b4d6af52a7e364 ]
A rotation value should have exactly one rotation angle.
At the moment there is no validation for this when parsing video=
parameters from the command line. This causes problems later on
when we try to combine the command line rotation with the panel
orientation.
To make sure that we generate a valid rotation value:
- Set DRM_MODE_ROTATE_0 by default (if no rotate= option is set)
- Validate that there is exactly one rotation angle set
(i.e. specifying the rotate= option multiple times is invalid)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117153429.54700-2-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7fd2dfc3694922eb7ace4801b7208cf9f62ebc7d ]
I was hitting kCFI crashes when building with clang, and after
some digging finally narrowed it down to the
dsi_mgr_connector_mode_valid() function being implemented as
returning an int, instead of an enum drm_mode_status.
This patch fixes it, and appeases the opaque word of the kCFI
gods (seriously, clang inlining everything makes the kCFI
backtraces only really rough estimates of where things went
wrong).
Thanks as always to Sami for his help narrowing this down.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Alistair Delva <adelva@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: freedreno@lists.freedesktop.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
