summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-12-12udp: ipv4: fix potential use after free in udp_v4_early_demux()Eric Dumazet1-3/+6
pskb_may_pull() can reallocate skb->head, we need to move the initialization of iph and uh pointers after its call. Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12macvtap: signal truncated packetsJason Wang1-5/+6
macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the trunca checking work. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12tun: unbreak truncated packet signallingJason Wang1-7/+9
Commit 6680ec68eff47d36f67b4351bc9836fd6cba9532 (tuntap: hardware vlan tx support) breaks the truncated packet signal by nev return a length greater than iov length in tun_put_user(). This patch fixes by always return the length of packet plus possible vlan header. Caller can detect the truncated packet by comparing the return value and the size of io length. Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12net: sched: htb: fix the calculation of quantumYang Yingliang1-8/+12
Now, 32bit rates may be not the true rate. So use rate_bytes_ps which is from max(rate32, rate64) to calcualte quantum. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12net: sched: tbf: fix the calculation of max_sizeYang Yingliang1-45/+70
Current max_size is caluated from rate table. Now, the rate table has been replaced and it's wrong to caculate max_size based on this rate table. It can lead wrong calculation of max_size. The burst in kernel may be lower than user asked, because burst may gets some loss when transform it to buffer(E.g. "burst 40kb rate 30mbit/s") and it seems we cannot avoid this loss. Burst's value(max_size) based on rate table may be equal user asked. If a packet's length is max_size, this packet will be stalled in tbf_dequeue() because its length is above the burst in kernel so that it cannot get enough tokens. The max_size guards against enqueuing packet sizes above q->buffer "time" in tbf_enqueue(). To make consistent with the calculation of tokens, this patch add a helper psched_ns_t2l() to calculate burst(max_size) directly to fix this problem. After this fix, we can support to using 64bit rates to calculate burst as well. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11micrel: add support for KSZ8041RNLISergei Shtylyov2-0/+17
Renesas R-Car development boards use KSZ8041RNLI PHY which for some reason has ID of 0x00221537 that is not documented for KSZ8041-family PHYs and does not match the documented ID of 0x0022151x (where 'x' is the revision). We have to add the new #define PHY_ID_* and new ksphy_driver[] entry, almost the same as KSZ8041 one, differing only in the 'phy_id' and 'name' fields. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11Merge branch 'for-davem' of ↵David S. Miller1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Just one patch this time -- a fix from Felix Fietkau to fix the duration calculation for non-aggregated packets in ath9k. This is a small change and it is obviously specific to ath9k. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11Merge branch 'master' of ↵John W. Linville1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-12-11udp: ipv4: fix an use after free in __udp4_lib_rcv()Eric Dumazet1-10/+6
Dave Jones reported a use after free in UDP stack : [ 5059.434216] ========================= [ 5059.434314] [ BUG: held lock freed! ] [ 5059.434420] 3.13.0-rc3+ #9 Not tainted [ 5059.434520] ------------------------- [ 5059.434620] named/863 is freeing memory ffff88005e960000-ffff88005e96061f, with a lock still held there! [ 5059.434815] (slock-AF_INET){+.-...}, at: [<ffffffff8149bd21>] udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.435012] 3 locks held by named/863: [ 5059.435086] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff8143054d>] __netif_receive_skb_core+0x11d/0x940 [ 5059.435295] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff81467a5e>] ip_local_deliver_finish+0x3e/0x410 [ 5059.435500] #2: (slock-AF_INET){+.-...}, at: [<ffffffff8149bd21>] udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.435734] stack backtrace: [ 5059.435858] CPU: 0 PID: 863 Comm: named Not tainted 3.13.0-rc3+ #9 [loadavg: 0.21 0.06 0.06 1/115 1365] [ 5059.436052] Hardware name: /D510MO, BIOS MOPNV10J.86A.0175.2010.0308.0620 03/08/2010 [ 5059.436223] 0000000000000002 ffff88007e203ad8 ffffffff8153a372 ffff8800677130e0 [ 5059.436390] ffff88007e203b10 ffffffff8108cafa ffff88005e960000 ffff88007b00cfc0 [ 5059.436554] ffffea00017a5800 ffffffff8141c490 0000000000000246 ffff88007e203b48 [ 5059.436718] Call Trace: [ 5059.436769] <IRQ> [<ffffffff8153a372>] dump_stack+0x4d/0x66 [ 5059.436904] [<ffffffff8108cafa>] debug_check_no_locks_freed+0x15a/0x160 [ 5059.437037] [<ffffffff8141c490>] ? __sk_free+0x110/0x230 [ 5059.437147] [<ffffffff8112da2a>] kmem_cache_free+0x6a/0x150 [ 5059.437260] [<ffffffff8141c490>] __sk_free+0x110/0x230 [ 5059.437364] [<ffffffff8141c5c9>] sk_free+0x19/0x20 [ 5059.437463] [<ffffffff8141cb25>] sock_edemux+0x25/0x40 [ 5059.437567] [<ffffffff8141c181>] sock_queue_rcv_skb+0x81/0x280 [ 5059.437685] [<ffffffff8149bd21>] ? udp_queue_rcv_skb+0xd1/0x4b0 [ 5059.437805] [<ffffffff81499c82>] __udp_queue_rcv_skb+0x42/0x240 [ 5059.437925] [<ffffffff81541d25>] ? _raw_spin_lock+0x65/0x70 [ 5059.438038] [<ffffffff8149bebb>] udp_queue_rcv_skb+0x26b/0x4b0 [ 5059.438155] [<ffffffff8149c712>] __udp4_lib_rcv+0x152/0xb00 [ 5059.438269] [<ffffffff8149d7f5>] udp_rcv+0x15/0x20 [ 5059.438367] [<ffffffff81467b2f>] ip_local_deliver_finish+0x10f/0x410 [ 5059.438492] [<ffffffff81467a5e>] ? ip_local_deliver_finish+0x3e/0x410 [ 5059.438621] [<ffffffff81468653>] ip_local_deliver+0x43/0x80 [ 5059.438733] [<ffffffff81467f70>] ip_rcv_finish+0x140/0x5a0 [ 5059.438843] [<ffffffff81468926>] ip_rcv+0x296/0x3f0 [ 5059.438945] [<ffffffff81430b72>] __netif_receive_skb_core+0x742/0x940 [ 5059.439074] [<ffffffff8143054d>] ? __netif_receive_skb_core+0x11d/0x940 [ 5059.442231] [<ffffffff8108c81d>] ? trace_hardirqs_on+0xd/0x10 [ 5059.442231] [<ffffffff81430d83>] __netif_receive_skb+0x13/0x60 [ 5059.442231] [<ffffffff81431c1e>] netif_receive_skb+0x1e/0x1f0 [ 5059.442231] [<ffffffff814334e0>] napi_gro_receive+0x70/0xa0 [ 5059.442231] [<ffffffffa01de426>] rtl8169_poll+0x166/0x700 [r8169] [ 5059.442231] [<ffffffff81432bc9>] net_rx_action+0x129/0x1e0 [ 5059.442231] [<ffffffff810478cd>] __do_softirq+0xed/0x240 [ 5059.442231] [<ffffffff81047e25>] irq_exit+0x125/0x140 [ 5059.442231] [<ffffffff81004241>] do_IRQ+0x51/0xc0 [ 5059.442231] [<ffffffff81542bef>] common_interrupt+0x6f/0x6f We need to keep a reference on the socket, by using skb_steal_sock() at the right place. Note that another patch is needed to fix a race in udp_sk_rx_dst_set(), as we hold no lock protecting the dst. Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11Merge branch 'sctp'David S. Miller2-19/+89
Wang Weidong says: ==================== sctp: check the rto_min and rto_max v6 -> v7: -patch2: fix the whitespace issues which pointed out by Daniel v5 -> v6: split the v5' first patch to patch1 and patch2, and remove the macro in constants.h -patch1: do rto_min/max socket option handling in its own patch, and fix the check of rto_min/max. -patch2: do rto_min/max sysctl handling in its own patch. -patch3: add Suggested-by Daniel. v4 -> v5: - patch1: add marco in constants.h and fix up spacing as suggested by Daniel - patch2: add a patch for fix up do_hmac_alg for according to do_rto_min[max] v3 -> v4: -patch1: fix use init_net directly which suggested by Vlad. v2 -> v3: -patch1: add proc_handler for check rto_min and rto_max which suggested by Vlad v1 -> v2: -patch1: fix the From Name which pointed out by David, and add the ACK by Neil ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11sctp: fix up a spacingwangweidong1-5/+2
fix up spacing of proc_sctp_do_hmac_alg for according to the proc_sctp_do_rto_min[max] in sysctl.c Suggested-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11sctp: add check rto_min and rto_max in sysctlwangweidong1-4/+65
rto_min should be smaller than rto_max while rto_max should be larger than rto_min. Add two proc_handler for the checking. Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11sctp: check the rto_min and rto_max in setsockoptwangweidong1-10/+22
When we set 0 to rto_min or rto_max, just not change the value. Also we should check the rto_min > rto_max. Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11ipv6: do not erase dst address with flow label destinationFlorent Fourcot6-6/+0
This patch is following b579035ff766c9412e2b92abf5cab794bff102b6 "ipv6: remove old conditions on flow label sharing" Since there is no reason to restrict a label to a destination, we should not erase the destination value of a socket with the value contained in the flow label storage. This patch allows to really have the same flow label to more than one destination. Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11sctp: properly latch and use autoclose value from sock to associationNeil Horman5-17/+13
Currently, sctp associations latch a sockets autoclose value to an association at association init time, subject to capping constraints from the max_autoclose sysctl value. This leads to an odd situation where an application may set a socket level autoclose timeout, but sliently sctp will limit the autoclose timeout to something less than that. Fix this by modifying the autoclose setsockopt function to check the limit, cap it and warn the user via syslog that the timeout is capped. This will allow getsockopt to return valid autoclose timeout values that reflect what subsequent associations actually use. While were at it, also elimintate the assoc->autoclose variable, it duplicates whats in the timeout array, which leads to multiple sources for the same information, that may differ (as the former isn't subject to any capping). This gives us the timeout information in a canonical place and saves some space in the association structure as well. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> CC: Wang Weidong <wangweidong1@huawei.com> CC: David Miller <davem@davemloft.net> CC: Vlad Yasevich <vyasevich@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11Merge branch 'tipc'David S. Miller2-6/+12
Jon Maloy says: ==================== tipc: corrections related to tasklet job mechanism These commits correct two bugs related to tipc' service for launching functions for asynchronous execution in a separate tasklet. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11tipc: protect handler_enabled variable with qitem_lock spin lockYing Xue1-3/+8
'handler_enabled' is a global flag indicating whether the TIPC signal handling service is enabled or not. The lack of lock protection for this flag incurs a risk for contention, so that a tipc_k_signal() call might queue a signal handler to a destroyed signal queue, with unpredictable results. To correct this, we let the already existing 'qitem_lock' protect the flag, as it already does with the queue itself. This way, we ensure that the flag always is consistent across all cores. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11tipc: correct the order of stopping services at rmmodJon Paul Maloy1-3/+4
The 'signal handler' service in TIPC is a mechanism that makes it possible to postpone execution of functions, by launcing them into a job queue for execution in a separate tasklet, independent of the launching execution thread. When we do rmmod on the tipc module, this service is stopped after the network service. At the same time, the stopping of the network service may itself launch jobs for execution, with the risk that these functions may be scheduled for execution after the data structures meant to be accessed by the job have already been deleted. We have seen this happen, most often resulting in an oops. This commit ensures that the signal handler is the very first to be stopped when TIPC is shut down, so there are no surprises during the cleanup of the other services. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0Nat Gurumoorthy1-0/+3
The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120) uninitialized. From power on reset this register may have garbage in it. The Register Base Address register defines the device local address of a register. The data pointed to by this location is read or written using the Register Data register (PCI config offset 128). When REG_BASE_ADDR has garbage any read or write of Register Data Register (PCI 128) will cause the PCI bus to lock up. The TCO watchdog will fire and bring down the system. Signed-off-by: Nat Gurumoorthy <natg@google.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: Revert macvtap/tun truncation signalling changes.David S. Miller2-26/+24
Jason Wang and Michael S. Tsirkin are still discussing how to properly fix this. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11macvtap: signal truncated packetsJason Wang1-13/+14
macvtap_put_user() never return a value grater than iov length, this in fact bypasses the truncated checking in macvtap_recvmsg(). Fix this by always returning the size of packet plus the possible vlan header to let the truncated checking work. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11tun: unbreak truncated packet signallingJason Wang1-11/+12
Commit 6680ec68eff47d36f67b4351bc9836fd6cba9532 (tuntap: hardware vlan tx support) breaks the truncated packet signal by never return a length greater than iov length in tun_put_user(). This patch fixes this by always return the length of packet plus possible vlan header. Caller can detect the truncated packet by comparing the return value and the size of iov length. Reported-by: Vlad Yasevich <vyasevich@gmail.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11vxlan: release rt when found circular routeFan Du1-1/+1
Otherwise causing dst memory leakage. Have Checked all other type tunnel device transmit implementation, no such things happens anymore. Signed-off-by: Fan Du <fan.du@windriver.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: unix: allow set_peek_off to failSasha Levin3-4/+8
unix_dgram_recvmsg() will hold the readlock of the socket until recv is complete. In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until unix_dgram_recvmsg() will complete (which can take a while) without allowing us to break out of it, triggering a hung task spew. Instead, allow set_peek_off to fail, this way userspace will not hang. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11Merge branch 'sfc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller6-23/+101
Ben Hutchings says: ==================== Several fixes for the PTP hardware support added in 3.7: 1. Fix filtering of PTP packets on the TX path to be robust against bad header lengths. 2. Limit logging on the RX path in case of a PTP packet flood, partly from Laurence Evans. 3. Disable PTP hardware when the interface is down so that we don't receive RX timestamp events, from Alexandre Rames. 4. Maintain clock frequency adjustment when a time offset is applied. Also fixes for the SFC9100 family support added in 3.12: 5. Take the RX prefix length into account when applying NET_IP_ALIGN, from Andrew Rybchenko. 6. Work around a bug that breaks communication between the driver and firmware, from Robert Stonehouse. Please also queue these up for the appropriate stable branches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: allwinner: emac: Add missing free_irqMaxime Ripard1-2/+3
The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on the managed device mechanism to actually free it. This causes an issue whenever someone wants to restart the interface, the interrupt still being held, and not yet released. Fall back to using the regular request_irq at .ndo_open time, and introduce a free_irq during .ndo_stop. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11inet: fix NULL pointer Oops in fib(6)_rule_suppressStefan Tomanek2-2/+9
This changes ensures that the routing entry investigated by the suppress function actually does point to a device struct before following that pointer, fixing a possible kernel oops situation when verifying the interface group associated with a routing table entry. According to Daniel Golle, this Oops can be triggered by a user process trying to establish an outgoing IPv6 connection while having no real IPv6 connectivity set up (only autoassigned link-local addresses). Fixes: 6ef94cfafba15 ("fib_rules: add route suppression based on ifgroup") Reported-by: Daniel Golle <daniel.golle@gmail.com> Tested-by: Daniel Golle <daniel.golle@gmail.com> Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: drop_monitor: fix the value of maxattrChangli Gao1-1/+0
maxattr in genl_family should be used to save the max attribute type, but not the max command type. Drop monitor doesn't support any attributes, so we should leave it as zero. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: emaclite: add barriers to support Xilinx Zynq platformSrikanth Thokala1-0/+13
This patch adds barriers at appropriate places to ensure the driver works on Xilinx Zynq ARM-based SoC platform. Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: emaclite: Remove unnecessary code that enables/disables interrupts on ↵Srikanth Thokala1-38/+0
PONG buffers There are no specific interrupts for the PONG buffer on both transmit and receive side, same interrupt is valid for both buffers. So, this patch removes this code. Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Reviewed-by: Michal Simek <monstr@monstr.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10ipv6: don't count addrconf generated routes against gc limitHannes Frederic Sowa1-5/+3
Brett Ciphery reported that new ipv6 addresses failed to get installed because the addrconf generated dsts where counted against the dst gc limit. We don't need to count those routes like we currently don't count administratively added routes. Because the max_addresses check enforces a limit on unbounded address generation first in case someone plays with router advertisments, we are still safe here. Reported-by: Brett Ciphery <brett.ciphery@windriver.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller3-28/+45
Pablo Neira Ayuso says: ==================== The following patchset contains three Netfilter fixes for your net tree, they are: * fix incorrect comparison in the new netnet hash ipset type, from Dave Jones. * fix splat in hashlimit due to missing removal of the content of its proc entry in netnamespaces, from Sergey Popovich. * fix missing rule flushing operation by table in nf_tables. Table flushing was already discussed back in October but this got lost and no patch has hit the tree to address this issue so far, from me. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10packet: fix send path when running with proto == 0Daniel Borkmann2-25/+50
Commit e40526cb20b5 introduced a cached dev pointer, that gets hooked into register_prot_hook(), __unregister_prot_hook() to update the device used for the send path. We need to fix this up, as otherwise this will not work with sockets created with protocol = 0, plus with sll_protocol = 0 passed via sockaddr_ll when doing the bind. So instead, assign the pointer directly. The compiler can inline these helper functions automagically. While at it, also assume the cached dev fast-path as likely(), and document this variant of socket creation as it seems it is not widely used (seems not even the author of TX_RING was aware of that in his reference example [1]). Tested with reproducer from e40526cb20b5. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap#Example Fixes: e40526cb20b5 ("packet: fix use after free race in send path when dev is released") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Tested-by: Salam Noureddine <noureddine@aristanetworks.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09ath9k: fix duration calculation for non-aggregated packetsFelix Fietkau1-0/+4
When not aggregating packets, fi->framelen should be passed in as length to calculate the duration. Before the tx path rework, ath_tx_fill_desc was called for either one aggregate, or one single frame, with the length of the packet or the aggregate as a parameter. After the rework, ath_tx_sched_aggr can pass a burst of single frames to ath_tx_fill_desc and sets len=0. Fix broken duration calculation by overriding the length in ath_tx_fill_desc before passing it to ath_buf_set_rate. Cc: stable@vger.kernel.org Reported-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-08netfilter: nf_tables: fix missing rules flushing per tablePablo Neira Ayuso1-13/+33
This patch allows you to atomically remove all rules stored in a table via the NFT_MSG_DELRULE command. You only need to indicate the specific table and no chain to flush all rules stored in that table. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-12-08netfilter: xt_hashlimit: fix proc entry leak in netns destroy pathSergey Popovich1-14/+11
In (32263dd1b netfilter: xt_hashlimit: fix namespace destroy path) the hashlimit_net_exit() function is always called right before hashlimit_mt_destroy() to release netns data. If you use xt_hashlimit with IPv4 and IPv6 together, this produces the following splat via netconsole in the netns destroy path: Pid: 9499, comm: kworker/u:0 Tainted: G WC O 3.2.0-5-netctl-amd64-core2 Call Trace: [<ffffffff8104708d>] ? warn_slowpath_common+0x78/0x8c [<ffffffff81047139>] ? warn_slowpath_fmt+0x45/0x4a [<ffffffff81144a99>] ? remove_proc_entry+0xd8/0x22e [<ffffffff810ebbaa>] ? kfree+0x5b/0x6c [<ffffffffa043c501>] ? hashlimit_net_exit+0x45/0x8d [xt_hashlimit] [<ffffffff8128ab30>] ? ops_exit_list+0x1c/0x44 [<ffffffff8128b28e>] ? cleanup_net+0xf1/0x180 [<ffffffff810369fc>] ? should_resched+0x5/0x23 [<ffffffff8105b8f9>] ? process_one_work+0x161/0x269 [<ffffffff8105aea5>] ? cwq_activate_delayed_work+0x3c/0x48 [<ffffffff8105c8c2>] ? worker_thread+0xc2/0x145 [<ffffffff8105c800>] ? manage_workers.isra.25+0x15b/0x15b [<ffffffff8105fa01>] ? kthread+0x76/0x7e [<ffffffff813581f4>] ? kernel_thread_helper+0x4/0x10 [<ffffffff8105f98b>] ? kthread_worker_fn+0x139/0x139 [<ffffffff813581f0>] ? gs_change+0x13/0x13 ---[ end trace d8c3cc0ad163ef79 ]--- ------------[ cut here ]------------ WARNING: at /usr/src/linux-3.2.52/debian/build/source_netctl/fs/proc/generic.c:849 remove_proc_entry+0x217/0x22e() Hardware name: remove_proc_entry: removing non-empty directory 'net/ip6t_hashlimit', leaking at least 'IN-REJECT' This is due to lack of removal net/ip6t_hashlimit/* entries in hashlimit_proc_net_exit(), since only IPv4 entries are deleted. Fix it by always removing the IPv4 and IPv6 entries and their parent directories in the netns destroy path. Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-12-07sfc: Poll for MCDI completion once before timeout occursRobert Stonehouse1-4/+12
There is an as-yet unexplained bug that sometimes prevents (or delays) the driver seeing the completion event for a completed MCDI request on the SFC9120. The requested configuration change will have happened but the driver assumes it to have failed, and this can result in further failures. We can mitigate this by polling for completion after unsuccessfully waiting for an event. Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-07sfc: Refactor efx_mcdi_poll() by introducing efx_mcdi_poll_once()Robert Stonehouse1-6/+17
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-07sfc: RX buffer allocation takes prefix size into account in IP header alignmentAndrew Rybchenko3-4/+9
rx_prefix_size is 4-bytes aligned on Falcon/Siena (16 bytes), but it is equal to 14 on EF10. So, it should be taken into account if arch requires IP header to be 4-bytes aligned (via NET_IP_ALIGN). Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-07sfc: Maintain current frequency adjustment when applying a time offsetBen Hutchings1-2/+2
There is a single MCDI PTP operation for setting the frequency adjustment and applying a time offset to the hardware clock. When applying a time offset we should not change the frequency adjustment. These two operations can now be requested separately but this requires a flash firmware update. Keep using the single operation, but remember and repeat the previous frequency adjustment. Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-07sfc: Stop/re-start PTP when stopping/starting the datapath.Alexandre Rames3-3/+33
This disables PTP when we bring the interface down to avoid getting unmatched RX timestamp events, and tries to re-enable it when bringing the interface up. [bwh: Make efx_ptp_stop() safe on Falcon. Introduce efx_ptp_{start,stop}_datapath() functions; we'll expand them later.] Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-07sfc: Rate-limit log message for PTP packets without a matching timestamp eventBen Hutchings1-2/+3
In case of a flood of PTP packets, the timestamp peripheral and MC firmware on the SFN[56]322F boards may not be able to provide timestamp events for all packets. Don't complain too much about this. Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-07sfc: PTP: Moderate log message on event queue overflowLaurence Evans1-2/+21
Limit syslog flood if a PTP packet storm occurs. Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-07virtio-net: free bufs correctly on invalid packet lengthMichael Dalton1-3/+3
When a packet with invalid length arrives, ensure that the packet is freed correctly if mergeable packet buffers and big packets (GUEST_TSO4) are both enabled. Signed-off-by: Michael Dalton <mwdalton@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-07net: mvneta: Fix incorrect DMA unmapping sizeEzequiel Garcia1-2/+2
The current code unmaps the DMA mapping created for rx skb_buff's by using the data_size as the the mapping size. This is wrong since the correct size to specify should match the size used to create the mapping. This commit removes the following DMA_API_DEBUG warning: ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:887 check_unmap+0x3a8/0x860() mvneta d0070000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002eb80000] [map size=1600 bytes] [unmap size=66 bytes] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.21-01444-ga88ae13-dirty #92 [<c0013600>] (unwind_backtrace+0x0/0xf8) from [<c0010fb8>] (show_stack+0x10/0x14) [<c0010fb8>] (show_stack+0x10/0x14) from [<c001afa0>] (warn_slowpath_common+0x48/0x68) [<c001afa0>] (warn_slowpath_common+0x48/0x68) from [<c001b01c>] (warn_slowpath_fmt+0x30/0x40) [<c001b01c>] (warn_slowpath_fmt+0x30/0x40) from [<c018d0fc>] (check_unmap+0x3a8/0x860) [<c018d0fc>] (check_unmap+0x3a8/0x860) from [<c018d734>] (debug_dma_unmap_page+0x64/0x70) [<c018d734>] (debug_dma_unmap_page+0x64/0x70) from [<c0233f78>] (mvneta_rx+0xec/0x468) [<c0233f78>] (mvneta_rx+0xec/0x468) from [<c023436c>] (mvneta_poll+0x78/0x16c) [<c023436c>] (mvneta_poll+0x78/0x16c) from [<c02db468>] (net_rx_action+0x94/0x160) [<c02db468>] (net_rx_action+0x94/0x160) from [<c0021e68>] (__do_softirq+0xe8/0x1d0) [<c0021e68>] (__do_softirq+0xe8/0x1d0) from [<c0021ff8>] (do_softirq+0x4c/0x58) [<c0021ff8>] (do_softirq+0x4c/0x58) from [<c0022228>] (irq_exit+0x58/0x90) [<c0022228>] (irq_exit+0x58/0x90) from [<c000e7c8>] (handle_IRQ+0x3c/0x94) [<c000e7c8>] (handle_IRQ+0x3c/0x94) from [<c0008548>] (armada_370_xp_handle_irq+0x4c/0xb4) [<c0008548>] (armada_370_xp_handle_irq+0x4c/0xb4) from [<c000dc20>] (__irq_svc+0x40/0x50) Exception stack(0xc04f1f70 to 0xc04f1fb8) 1f60: c1fe46f8 00000000 00001d92 00001d92 1f80: c04f0000 c04f0000 c04f84a4 c03e081c c05220e7 00000001 c05220e7 c04f0000 1fa0: 00000000 c04f1fb8 c000eaf8 c004c048 60000113 ffffffff [<c000dc20>] (__irq_svc+0x40/0x50) from [<c004c048>] (cpu_startup_entry+0x54/0x128) [<c004c048>] (cpu_startup_entry+0x54/0x128) from [<c04c1a14>] (start_kernel+0x29c/0x2f0) [<c04c1a14>] (start_kernel+0x29c/0x2f0) from [<00008074>] (0x8074) ---[ end trace d4955f6acd178110 ]--- Mapped at: [<c018d600>] debug_dma_map_page+0x4c/0x11c [<c0235d6c>] mvneta_setup_rxqs+0x398/0x598 [<c0236084>] mvneta_open+0x40/0x17c [<c02dbbd4>] __dev_open+0x9c/0x100 [<c02dbe58>] __dev_change_flags+0x7c/0x134 Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-07br: fix use of ->rx_handler_data in code executed on non-rx_handler pathJiri Pirko2-1/+11
br_stp_rcv() is reached by non-rx_handler path. That means there is no guarantee that dev is bridge port and therefore simple NULL check of ->rx_handler_data is not enough. There is need to check if dev is really bridge port and since only rcu read lock is held here, do it by checking ->rx_handler pointer. Note that synchronize_net() in netdev_rx_handler_unregister() ensures this approach as valid. Introduced originally by: commit f350a0a87374418635689471606454abc7beaa3a "bridge: use rx_handler_data pointer to store net_bridge_port pointer" Fixed but not in the best way by: commit b5ed54e94d324f17c97852296d61a143f01b227a "bridge: fix RCU races with bridge port" Reintroduced by: commit 716ec052d2280d511e10e90ad54a86f5b5d4dcc2 "bridge: fix NULL pointer deref of br_port_get_rcu" Please apply to stable trees as well. Thanks. RH bugzilla reference: https://bugzilla.redhat.com/show_bug.cgi?id=1025770 Reported-by: Laine Stump <laine@redhat.com> Debugged-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-07sfc: Add length checks to efx_xmit_with_hwtstamp() and efx_ptp_is_ptp_tx()Ben Hutchings1-0/+4
efx_ptp_is_ptp_tx() must be robust against skbs from raw sockets that have invalid IPv4 and UDP headers. Add checks that: - the transport header has been found - there is enough space between network and transport header offset for an IPv4 header - there is enough space after the transport header offset for a UDP header Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-07virtio: delete napi structures from netdev before releasing memoryAndrey Vagin1-0/+5
free_netdev calls netif_napi_del too, but it's too late, because napi structures are placed on vi->rq. netif_napi_add() is called from virtnet_alloc_queues. general protection fault: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables virtio_balloon pcspkr virtio_net(-) i2c_pii CPU: 1 PID: 347 Comm: rmmod Not tainted 3.13.0-rc2+ #171 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800b779c420 ti: ffff8800379e0000 task.ti: ffff8800379e0000 RIP: 0010:[<ffffffff81322e19>] [<ffffffff81322e19>] __list_del_entry+0x29/0xd0 RSP: 0018:ffff8800379e1dd0 EFLAGS: 00010a83 RAX: 6b6b6b6b6b6b6b6b RBX: ffff8800379c2fd0 RCX: dead000000200200 RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000001 RDI: ffff8800379c2fd0 RBP: ffff8800379e1dd0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800379c2f90 R13: ffff880037839160 R14: 0000000000000000 R15: 00000000013352f0 FS: 00007f1400e34740(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f464124c763 CR3: 00000000b68cf000 CR4: 00000000000006e0 Stack: ffff8800379e1df0 ffffffff8155beab 6b6b6b6b6b6b6b2b ffff8800378391c0 ffff8800379e1e18 ffffffff8156499b ffff880037839be0 ffff880037839d20 ffff88003779d3f0 ffff8800379e1e38 ffffffffa003477c ffff88003779d388 Call Trace: [<ffffffff8155beab>] netif_napi_del+0x1b/0x80 [<ffffffff8156499b>] free_netdev+0x8b/0x110 [<ffffffffa003477c>] virtnet_remove+0x7c/0x90 [virtio_net] [<ffffffff813ae323>] virtio_dev_remove+0x23/0x80 [<ffffffff813f62ef>] __device_release_driver+0x7f/0xf0 [<ffffffff813f6ca0>] driver_detach+0xc0/0xd0 [<ffffffff813f5f28>] bus_remove_driver+0x58/0xd0 [<ffffffff813f72ec>] driver_unregister+0x2c/0x50 [<ffffffff813ae65e>] unregister_virtio_driver+0xe/0x10 [<ffffffffa0036942>] virtio_net_driver_exit+0x10/0x6ce [virtio_net] [<ffffffff810d7cf2>] SyS_delete_module+0x172/0x220 [<ffffffff810a732d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff810f5d4c>] ? __audit_syscall_entry+0x9c/0xf0 [<ffffffff81677f69>] system_call_fastpath+0x16/0x1b Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00 RIP [<ffffffff81322e19>] __list_del_entry+0x29/0xd0 RSP <ffff8800379e1dd0> ---[ end trace d5931cd3f87c9763 ]--- Fixes: 986a4f4d452d (virtio_net: multiqueue support) Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Andrey Vagin <avagin@openvz.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-07virtio-net: determine type of bufs correctlyAndrey Vagin1-3/+3
free_unused_bufs must check vi->mergeable_rx_bufs before vi->big_packets, because we use this sequence in other places. Otherwise we allocate buffer of one type, then free it as another type. general protection fault: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables pcspkr virtio_balloon virtio_net(-) i2c_pii CPU: 0 PID: 400 Comm: rmmod Not tainted 3.13.0-rc2+ #170 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800b6d2a210 ti: ffff8800aed32000 task.ti: ffff8800aed32000 RIP: 0010:[<ffffffffa00345f3>] [<ffffffffa00345f3>] free_unused_bufs+0xc3/0x190 [virtio_net] RSP: 0018:ffff8800aed33dd8 EFLAGS: 00010202 RAX: ffff8800b1fe2c00 RBX: ffff8800b66a7240 RCX: 6b6b6b6b6b6b6b6b RDX: 6b6b6b6b6b6b6b6b RSI: ffff8800b8419a68 RDI: ffff8800b66a1148 RBP: ffff8800aed33e00 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffff8800b66a1148 R14: 0000000000000000 R15: 000077ff80000000 FS: 00007fc4f9c4e740(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f63f432f000 CR3: 00000000b6538000 CR4: 00000000000006f0 Stack: ffff8800b66a7240 ffff8800b66a7380 ffff8800377bd3f0 0000000000000000 00000000023302f0 ffff8800aed33e18 ffffffffa00346e2 ffff8800b66a7240 ffff8800aed33e38 ffffffffa003474d ffff8800377bd388 ffff8800377bd390 Call Trace: [<ffffffffa00346e2>] remove_vq_common+0x22/0x40 [virtio_net] [<ffffffffa003474d>] virtnet_remove+0x4d/0x90 [virtio_net] [<ffffffff813ae303>] virtio_dev_remove+0x23/0x80 [<ffffffff813f62cf>] __device_release_driver+0x7f/0xf0 [<ffffffff813f6c80>] driver_detach+0xc0/0xd0 [<ffffffff813f5f08>] bus_remove_driver+0x58/0xd0 [<ffffffff813f72cc>] driver_unregister+0x2c/0x50 [<ffffffff813ae63e>] unregister_virtio_driver+0xe/0x10 [<ffffffffa0036852>] virtio_net_driver_exit+0x10/0x7be [virtio_net] [<ffffffff810d7cf2>] SyS_delete_module+0x172/0x220 [<ffffffff810a732d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff810f5d4c>] ? __audit_syscall_entry+0x9c/0xf0 [<ffffffff81677f69>] system_call_fastpath+0x16/0x1b Code: c0 74 55 0f 1f 44 00 00 80 7b 30 00 74 7a 48 8b 50 30 4c 89 e6 48 03 73 20 48 85 d2 0f 84 bb 00 00 00 66 0f RIP [<ffffffffa00345f3>] free_unused_bufs+0xc3/0x190 [virtio_net] RSP <ffff8800aed33dd8> ---[ end trace edb570ea923cce9c ]--- Fixes: 2613af0ed18a (virtio_net: migrate mergeable rx buffers to page frag allocators) Cc: Michael Dalton <mwdalton@google.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Andrey Vagin <avagin@openvz.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-07bonding: fix packets_per_slave showingNikolay Aleksandrov1-2/+2
There's an issue when showing the value of packets_per_slave due to using signed integer. The value may be < 0 and thus not put through reciprocal_value() before showing. This patch makes it use unsigned integer when showing it. CC: Andy Gospodarek <andy@greyhouse.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 00:58:54 +0300