summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2007-08-239p: update maintainers and documentationEric Van Hensbergen2-7/+21
Updates to the MAINTAINERS file and documentation for 9p to point to the swik wiki versus the outdated sf.net page. Also updated some email addresses and added pointers to papers which better describe the implementation and application of the Linux 9p client. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-08-239p: fix use after freeEric Van Hensbergen1-3/+6
On 7/22/07, Adrian Bunk <bunk@stusta.de> wrote: The Coverity checker spotted the following use-after-free in net/9p/mux.c: <-- snip --> ... struct p9_conn *p9_conn_create(struct p9_transport *trans, int msize, unsigned char *extended) { ... if (!m->tagpool) { kfree(m); return ERR_PTR(PTR_ERR(m->tagpool)); } ... <-- snip --> Also spotted was a leak of the same structure further down in the function. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-08-21Revert "USB: EHCI cpufreq fix"Linus Torvalds5-215/+0
This reverts commit 196705c9bbc03540429b0f7cf9ee35c2f928a534. It was reported to cause a regression by Daniel Exner, and Arjan van de Ven points out that we actually already have infrastructure in place for setting limits on acceptable DMA latency that would be the much more correct fix for the problem with some Broadcom EHCI controllers. Fixed up trivial conflicts due to the changes to support big-endian host controller descriptors in drivers/usb/host/{ehci-sched.c,ehci.h}. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-21dio: zero struct dio with kzalloc instead of manuallyZach Brown1-17/+1
This patch uses kzalloc to zero all of struct dio rather than manually trying to track which fields we rely on being zero. It passed aio+dio stress testing and some bug regression testing on ext3. This patch was introduced by Linus in the conversation that lead up to Badari's minimal fix to manually zero .map_bh.b_state in commit: 6a648fa72161d1f6468dabd96c5d3c0db04f598a It makes the code a bit smaller. Maybe a couple fewer cachelines to load, if we're lucky: text data bss dec hex filename 3285925 568506 1304616 5159047 4eb887 vmlinux 3285797 568506 1304616 5158919 4eb807 vmlinux.patched I was unable to measure a stable difference in the number of cpu cycles spent in blockdev_direct_IO() when pushing aio+dio 256K reads at ~340MB/s. So the resulting intent of the patch isn't a performance gain but to avoid exposing ourselves to the risk of finding another field like .map_bh.b_state where we rely on zeroing but don't enforce it in the code. Signed-off-by: Zach Brown <zach.brown@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds15-74/+113
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide-disk: workaround for buggy HPA support on ST340823A (take 3) hpt34x: fix CONFIG_HPT34X_AUTODMA=n handling triflex: add missing ->dma_base check pdc202xx_old: add missing ->dma_base check pdc202xx_new: add missing ->dma_base check cs5530: add missing ->dma_base check ide: ide_config_drive_speed() bugfixes ide: add cable detection for early UDMA66 devices (take 3) ide-pmac: fix drive->init_speed reporting ide: config_drive_for_dma() fixes ide-cris: fix ->set_pio_mode method to set transfer mode on the device ide: fix hidden dependencies on CONFIG_IDE_GENERIC ide: make CONFIG_IDE_GENERIC default to N
2007-08-21Merge branch 'master' of ↵Linus Torvalds6-20/+51
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (6028): Turn an unnecessary mdelay() into msleep(). V4L/DVB (6027): Get rid of an ill-behaved msleep in i2c write V4L/DVB (6026): Avoid powering up the camera on resume V4L/DVB (6016): get_dvb_firmware: update script for new location of tda10046 firmware V4L/DVB (5991): dvb-pll: Set minimum and maximum frequency properly V4L/DVB (5969): ivtv: report ivtv version in status log V4L/DVB (5967): ivtv: fix VIDIOC_S_FBUF:new OSD values where never set V4L/DVB (5968): videodev2.h: remove superfluous FBUF GLOBAL_INV_ALPHA support
2007-08-21JFFS2 locking regression fix.David Woodhouse1-0/+3
Commit a491486a2087ac3dfc00efb4f838c8d684afaf54 introduced a locking problem in JFFS2 -- we up() the alloc_sem when we weren't previously holding it. This leads to all kinds of fun behaviour later. There was a _reason_ for the if (1 /* alternative path needs testing */ || which the above-mentioned commit removed :) Discovered and debugged by Giulio Fedel <giulio.fedel@andorsystems.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-21Merge branch 'fixes-2.6.23' of ↵Linus Torvalds13-553/+389
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc * 'fixes-2.6.23' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: [POWERPC] Fix 8xx compile failure [POWERPC] Fix FSL BookE machine check reporting [POWERPC] Fix interrupt routing and setup of ULI M1575 on FSL boards [POWERPC] Add interrupt resource for RTC CMOS driver
2007-08-21ensure we don't use bootconsoles after init has been releasedRobin Getz1-0/+11
This is a followup to the cleanups for earlyprintk patch from Gerd Hoffmann http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=69331af79cf29e26d1231152a172a1a10c2df511 This ensures that a bootconsole is unregistered if it is not replaced. The current implementation spews garbage out the bootconsole in this case, since the bootconsole structure is normally in the init section, and is freed, but still used. Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-21ide-disk: workaround for buggy HPA support on ST340823A (take 3)Bartlomiej Zolnierkiewicz2-0/+20
This disk reports total number of sectors instead of maximum sector address in response to READ_NATIVE_MAX_ADDRESS command and also happily accepts SET_MAX_ADDRESS command with the bogus value. This results in +1 sector capacity being used and errors on attempts to use the last sector. ... hdd: Host Protected Area detected.         current capacity is 78165360 sectors (40020 MB)         native  capacity is 78165361 sectors (40020 MB) hdd: Host Protected Area disabled. ... hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000 hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360, sector=78165360 ... Add hpa_list[] table and workaround the issue in idedisk_check_hpa(). v2: * Add missing export and improve patch description a bit. v3: * Add list termination. (From Mikko) Fixes kernel bugzilla bug #8816. Thanks to Mikko for investigating the issue and helping with this patch. Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21hpt34x: fix CONFIG_HPT34X_AUTODMA=n handlingBartlomiej Zolnierkiewicz1-4/+2
Programming DMA mode may destroy current PIO mode setting so if CONFIG_HPT34X_AUTODMA=n (the default case) make ide_tune_dma() fail early by disabling all host DMA masks and re-tune PIO mode. This fix doesn't help with the driver being broken but is needed for some other changes. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21triflex: add missing ->dma_base checkBartlomiej Zolnierkiewicz1-0/+3
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21pdc202xx_old: add missing ->dma_base checkBartlomiej Zolnierkiewicz1-3/+6
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21pdc202xx_new: add missing ->dma_base checkBartlomiej Zolnierkiewicz1-2/+8
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Also this host driver requires valid PCI BAR4 for normal operation so check it in ->init_chipset and fail initialization if not set. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21cs5530: add missing ->dma_base checkBartlomiej Zolnierkiewicz1-1/+7
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Also this host driver requires valid PCI BAR4 for normal operation so check it in ->init_chipset and fail initialization if not set. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21ide: ide_config_drive_speed() bugfixesBartlomiej Zolnierkiewicz1-2/+2
* Use ->OUTBSYNC instead of ->OUTB when writing command register (needed for scc_pata and pmac host drivers). * Don't check DRDY bit of the status register on ATAPI devices (ATAPI devices are free to ignore DRDY bit). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21ide: add cable detection for early UDMA66 devices (take 3)Bartlomiej Zolnierkiewicz3-23/+38
* Move ide_in_drive_list() from ide-dma.c to ide-iops.c. * Add ivb_list[] table for listening early UDMA66 devices which don't conform to ATA4 standard wrt cable detection (bit14 is zero, only bit13 is valid) and use only device side cable detection for them since host side cable detection may be unreliable. * Add model "QUANTUM FIREBALLlct10 05" with firwmare "A03.0900" to the list (from Craig's bugreport). v2: * Improve kernel message basing on suggestion from Sergei. v3: * Don't print kernel message when no device side cable detection is done, plus some minor fixes. (Noticed by Sergei) Thanks to Craig for testing this patch. Cc: Craig Block <chblock3@yahoo.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21ide-pmac: fix drive->init_speed reportingBartlomiej Zolnierkiewicz1-11/+3
pmac_ide_tune_chipset() don't set drive->init_speed. Fix it by setting drive->{current,init}_speed in pmac_ide_do_setfeature() and clean up pmac_ide_{tune_chipset,mdma_enable,udma_enable}(). Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21ide: config_drive_for_dma() fixesBartlomiej Zolnierkiewicz3-26/+10
* Add DMA blacklist checking (->ide_dma_on check probably can go now). * Add ->atapi_dma flag checking and remove no longer needed ns87415_ide_dma_check() from ns87415 host driver. * Remove now needless __ide_dma_check() wrapper and symbol export. * Check drive->autodma instead of hwif->autodma (there should be no changes in behavior as all users of config_drive_for_dma() set both ->autodma flags). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21ide-cris: fix ->set_pio_mode method to set transfer mode on the deviceBartlomiej Zolnierkiewicz1-0/+2
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21ide: fix hidden dependencies on CONFIG_IDE_GENERICBartlomiej Zolnierkiewicz3-0/+11
Some host drivers depend on CONFIG_IDE_GENERIC to do the probing but their config options lack explicit dependencies on IDE_GENERIC. In the long-term these host drivers should be fixed to do the probing themselves but for now fix them by making their config options select CONFIG_IDE_GENERIC. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-21ide: make CONFIG_IDE_GENERIC default to NTejun Heo1-2/+1
These days, CONFIG_IDE_GENERIC causes more confusion and misconfiguration than it helps. Especially so because libata is linked after the generic driver. Default to N. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: "P.C.Chan" <pc.chan@alcatel-lucent.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20V4L/DVB (6028): Turn an unnecessary mdelay() into msleep().Marcelo Tosatti1-1/+1
Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (6027): Get rid of an ill-behaved msleep in i2c writeJonathan Corbet2-2/+25
Configuring the OLPC camera requires something over 150 register writes. Unfortunately, querying the CAFE i2c controller too soon after a write causes the hardware to flake. The problem had been "solved" with an msleep() call, but, between the number of registers and how msleep() behaves, that resulted in a 3-second delay on camera initialization. Instead, we hand-code a wait for the completion interrupt which avoids reading the status registers. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (6026): Avoid powering up the camera on resumeChris Ball1-1/+10
Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (6016): get_dvb_firmware: update script for new location of tda10046 ↵Andreas Arens1-12/+12
firmware Update get_dvb_firmware script for the new location of the tda10046 firmware. The old location doesn't work anymore. Signed-off-by: Andreas Arens <ari@goron.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5991): dvb-pll: Set minimum and maximum frequency properlyTrent Piepho1-1/+1
The tuner maximum frequency wasn't being set, while the minimum frequency was set to what the maximum should have been. If a future patch were to enforce these limits, dvb-pll would be effectively broken. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5969): ivtv: report ivtv version in status logHans Verkuil1-1/+1
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5967): ivtv: fix VIDIOC_S_FBUF:new OSD values where never setHans Verkuil1-0/+1
ivtv: fix VIDIOC_S_FBUF support: new OSD values where never actually set. The values set with VIDIOC_S_FBUF were not actually used until the next VIDIOC_S_FMT. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5968): videodev2.h: remove superfluous FBUF GLOBAL_INV_ALPHA supportHans Verkuil1-2/+0
There is no need for a global inverted alpha capability since all the application has to do is to pass '255-alpha' as the global alpha value. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-19missing return in bridge sysfs codeAl Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-19KVM: Avoid calling smp_call_function_single() with interrupts disabledAvi Kivity1-0/+4
When taking a cpu down, we need to hardware_disable() it. Unfortunately, the CPU_DYING notifier is called with interrupts disabled, which means we can't use smp_call_function_single(). Fortunately, the CPU_DYING notifier is always called on the dying cpu, so we don't need to use the function at all and can simply call hardware_disable() directly. Tested-by: Paolo Ornati <ornati@fastwebnet.it> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-19Remove double inclusion of linux/capability.hChristian Heim1-1/+0
Remove the second inclusion of linux/capability.h, which has been introduced with "[PATCH] move capable() to capability.h" (commit c59ede7b78db329949d9cdcd7064e22d357560ef) Signed-off-by: Christian Heim <phreak@gentoo.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-19Fix <math-emu/soft-fp.h> tpyoAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-19x86: properly initialize temp insn buffer for paravirt patchingChris Wright1-0/+2
With commit ab144f5ec64c42218a555ec1dbde6b60cf2982d6 the patching code now collects the complete new instruction stream into a temp buffer before finally patching in the new insns. In some cases the paravirt patchers will choose to leave the patch site unpatched (length mismatch, clobbers mismatch, etc). This causes the new patching code to copy an uninitialized temp buffer, i.e. garbage, to the callsite. Simply make sure to always initialize the buffer with the original instruction stream. A better fix is to audit all the patchers and return proper length so that apply_paravirt() can skip copies when we leave the patch site untouched. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds3-6/+6
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4549/1: KS8695: Fix build errors [ARM] 4546/1: s3c2410: fix architecture typo for s3c2442 [ARM] 4544/1: arm: fix section mismatch in pxa fb
2007-08-18x86_64: Check for .cfi_rel_offset in CFI probeAndi Kleen2-4/+4
Very old 64bit binutils have .cfi_startproc/endproc, but no .cfi_rel_offset. Check for .cfi_rel_offset too. Cc: Jan Beulich <jbeulich@novell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18x86_64: Change PMDS invocation to single macroAndi Kleen1-2/+1
Very old binutils (2.12.90...) seem to have trouble with newlines in assembler macro invocation. They put them into the resulting argument expansion. In this case this lead to a parse error because a .rept expression ended up spread over multiple lines. Change the PMDS() invocation to a single line. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18x86_64: Fix to keep watchdog disabled by default for i386/x86_64Daniel Gollub5-7/+9
Fixed wrong expression which enabled watchdogs even if nmi_watchdog kernel parameter wasn't set. This regression got slightly introduced with commit b7471c6da94d30d3deadc55986cc38d1ff57f9ca. Introduced NMI_DISABLED (-1) which allows to switch the value of NMI_DEFAULT without breaking the APIC NMI watchdog code (again). Fixes: https://bugzilla.novell.com/show_bug.cgi?id=298084 http://bugzilla.kernel.org/show_bug.cgi?id=7839 And likely some more nmi_watchdog=0 related issues. Signed-off-by: Daniel Gollub <dgollub@suse.de> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18x86_64: Fail dma_alloc_coherent on dma less devicesAndi Kleen1-0/+4
This should fix an oops with PCMCIA PATA devices http://bugzilla.kernel.org/show_bug.cgi?id=8424 This is not a full fix for the problem, but probably still the right thing to do. [ I'm almost certain it's *not* the right thing to do, but it avoids an oops, and I want comments from others on what the right thing would actually be.. I suspect we should just remove the use of dma_mask entirely in this function, and just use coherent_dma_mask. - Linus ] Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18fix random hang in forcedeth driver when using netconsoleTimo Jantunen1-5/+5
If the forcedeth driver receives too much work in an interrupt, it assumes it has a broken hardware with stuck IRQ. It works around the problem by disabling interrupts on the nic but makes a printk while holding device spinlog - which isn't smart thing to do if you have netconsole on the same nic. This patch moves the printk's out of the spinlock protected area. Without this patch the machine hangs hard. With this patch everything still works even when there is significant increase on CPU usage while using the nic. Signed-off-by: Timo Jantunen <jeti@iki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18i386: Fix a couple busy loops in mach_wakecpu.h:wait_for_init_deassert()Satyam Sharma2-2/+4
Use cpu_relax() in the busy loops, as atomic_read() doesn't automatically imply volatility for i386 and x86_64. x86_64 doesn't have this issue because it open-codes the while loop in smpboot.c:smp_callin() itself that already uses cpu_relax(). For i386, however, smpboot.c:smp_callin() calls wait_for_init_deassert() which is buggy for mach-default and mach-es7000 cases. [ I test-built a kernel -- smp_callin() itself got inlined in its only callsite, smpboot.c:start_secondary() -- and the relevant piece of code disassembles to the following: 0xc1019704 <start_secondary+12>: mov 0xc144c4c8,%eax 0xc1019709 <start_secondary+17>: test %eax,%eax 0xc101970b <start_secondary+19>: je 0xc1019709 <start_secondary+17> init_deasserted (at 0xc144c4c8) gets fetched into %eax only once and then we loop over the test of the stale value in the register only, so these look like real bugs to me. With the fix below, this becomes: 0xc1019706 <start_secondary+14>: pause 0xc1019708 <start_secondary+16>: cmpl $0x0,0xc144c4c8 0xc101970f <start_secondary+23>: je 0xc1019706 <start_secondary+14> which looks nice and healthy. ] Thanks to Heiko Carstens for noticing this. Signed-off-by: Satyam Sharma <satyam@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Add some help texts to recently-introduced kconfig itemsJan Engelhardt11-0/+64
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Enable partitions for lguest block deviceRusty Russell1-3/+6
The lguest block device only requests one minor, which means partitions don't work (eg "root=/dev/lgba1"). Let's follow the crowd and ask for 16. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6Linus Torvalds3-5/+18
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: arch/sh64/kernel/setup.c: duplicate include removal. sh64: arch/sh64/kernel/signal.c: duplicate include removal sh64: Add missing dma_sync_single_for_*().
2007-08-18Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23Linus Torvalds4-1/+28
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23: sh: remove extraneous ; on scif_sercon_putc wait loop sh: Add missing dma_sync_single_range_for_*(). sh: panic on machvec section misalignment. sh: Fix PTRACE_PEEKTEXT/PEEKDATA fallout from generic_ptrace_peekdata().
2007-08-18Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds3-26/+36
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (smsc47m1) restore missing name attribute hwmon: (w83627ehf) don't assume bank 0 hwmon: (w83627ehf) read fan_div values during probe hwmon: fix w83781d temp sensor type setting
2007-08-18Merge branch 'release' of ↵Linus Torvalds24-57/+105
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: Cross-compilation between e.g. i386 -> 64bit could break -> work around it [IA64] Enable early console for Ski simulator [IA64] forbid ptrace changes psr.ri to 3 [IA64] Failure to grow RBS [IA64] Fix processor_get_freq [IA64] SGI Altix : fix a force_interrupt bug on altix [IA64] Update arch/ia64/configs/* s/SLAB/SLUB/ [IA64] get back PT_IA_64_UNWIND program header [IA64] need NOTES in vmlinux.lds.S [IA64] make unwinder stop at last frame of the bootloader [IA64] Clean up CPE handler registration [IA64] Include Kconfig.preempt [IA64] SN2 needs platform specific irq_to_vector() function. [IA64] Use atomic64_read to read an atomic64_t. [IA64] disable irq's and check need_resched before safe_halt
2007-08-18Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: correct error code in selinux_audit_rule_init
2007-08-18Merge branch 'for-linus' of ↵Linus Torvalds15-61/+77
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Incorrect semicolon after if statement mlx4_core: Wait 1 second after reset before accessing device IPoIB: Fix leak in ipoib_transport_dev_init() error path IB/mlx4: Fix opcode returned in RDMA read completion IB/srp: Add OUI for new Cisco targets IB/srp: Wrap OUI checking for workarounds in helper functions RDMA/cxgb3: Always call low level send function via cxgb3_ofld_send() IB: Move the macro IB_UMEM_MAX_PAGE_CHUNK() to umem.c IB: Include <linux/list.h> and <linux/rwsem.h> from <rdma/ib_verbs.h> IB: Include <linux/list.h> from <rdma/ib_mad.h> IB/mad: Fix address handle leak in mad_rmpp IB/mad: agent_send_response() should be void IB/mad: Fix memory leak in switch handling in ib_mad_recv_done_handler() IB/mad: Fix error path if response alloc fails in ib_mad_recv_done_handler() IB/sa: Don't need to check for default P_Key twice IB/core: Ignore membership bit in ib_find_pkey()
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 02:38:50 +0300