summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-02-18tg3: Rename TG3_FLG3_RGMII_STD_IBND_DISABLEMatt Carlson2-8/+8
The STD part of this preprocessor definition is a bit of a misnomer. This flag is a coarse control of the RGMII inband status facilities. This patch renames the definition to be more accurate. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18tg3: Add more partno entries for fallback pathMatt Carlson1-1/+17
This patch adds 57765 asic partno entries for the path executed if VPD is not present in NVRAM. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18tg3: Allow phylib flowctrl changes anytimeMatt Carlson1-42/+52
This patch loosens the restriction that the phylib interface must be up and running to change the flow control parameters. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18tg3: Add support for 2 new selfboot formatsMatt Carlson2-0/+10
This patch adds new offsets to the bootcode version extraction code to support NVRAM format versions 4 and 5. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18tg3: Make 57791 and 57795 10/100 onlyMatt Carlson1-0/+2
This patch adds the 57791 and 57795 to the list of devices that only support 10 and 100 Mbps speeds. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18tg3: Enforce DMA mapping / skb assignment orderingMatt Carlson1-2/+7
Michael Chan noted that there is nothing in the code that would prevent the compiler from delaying the access of the "mapping" member of the newly arrived packet until much later. If this happened after the skb = NULL assignment, it is possible for the driver to pass a bad dma_addr value to pci_unmap_single(). To enforce this ordering, we need a write memory barrier. The pairing read memory barrier already exists in tg3_rx_prodring_xfer() under the comments starting with "Ensure that updates to the...". Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18tun: socket filter supportMichael S. Tsirkin2-0/+29
This patch adds Linux Socket Filter support to tun driver. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18net: export attach/detach filter routinesMichael S. Tsirkin1-0/+2
Export sk_attach_filter/sk_detach_filter routines, so that tun module can use them. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18chelsio: convert to use netdev_for_each_mc_addrJiri Pirko3-19/+5
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18cxgb3: convert to use netdev_for_each_addrJiri Pirko3-40/+11
Removed whole t3_rx_mode structure and appropriate helpers cause they are no longer needed. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18smsc911x: replace manual phy lookup.kirjanov@gmail.com1-14/+10
Use phy_find_first() function instead of manual lookup. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18net: bug fix for vlan + gro issueAjit Khaparde1-1/+1
Traffic (tcp) doesnot start on a vlan interface when gro is enabled. Even the tcp handshake was not taking place. This is because, the eth_type_trans call before the netif_receive_skb in napi_gro_finish() resets the skb->dev to napi->dev from the previously set vlan netdev interface. This causes the ip_route_input to drop the incoming packet considering it as a packet coming from a martian source. I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7. With this fix, the traffic starts and the test runs fine on both vlan and non-vlan interfaces. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18mv643xx_eth: fix missing validate_addr hookkirjanov@gmail.com1-0/+1
Fix missing validate_addr hook. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driverKristoffer Glembo5-0/+1803
Adds device driver for Aeroflex Gaisler 10/100 and 10/100/1G Ethernet MAC IP cores. Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18via-velocity: Enable scatter/gather IO by defaultSimon Kagstrom1-1/+1
Reduces CPU utilization significantly with sendfile for example. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18ipg: Remove device claimed by dl2k from pci id tableJeff Mahoney1-3/+1
This patch removes D-Link DGE-550T PCI ID (1186:4000) from the ipg driver. The ipg driver is for IP2000-based cards and the DGE-550T is a DL2000-based card. The driver loads and works for a few moments, but once a real workload is applied it stops operating. The ipg driver claimed this ID since it was introduced in 2.6.24 and it's forced many users to blacklist it. The correct driver for this hardware is the dl2k driver, which has been claiming this PCI ID since the 2.4 days. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18xfrm: Revert false event eliding commits.David S. Miller4-20/+9
As reported by Alexey Dobriyan: -------------------- setkey now takes several seconds to run this simple script and it spits "recv: Resource temporarily unavailable" messages. #!/usr/sbin/setkey -f flush; spdflush; add A B ipcomp 44 -m tunnel -C deflate; add B A ipcomp 45 -m tunnel -C deflate; spdadd A B any -P in ipsec ipcomp/tunnel/192.168.1.2-192.168.1.3/use; spdadd B A any -P out ipsec ipcomp/tunnel/192.168.1.3-192.168.1.2/use; -------------------- Obviously applications want the events even when the table is empty. So we cannot make this behavioral change. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18SiS190/191 half-duplex initialization fixRiccardo Ghetta1-1/+10
Adds half-duplex specific setup code (taken from SiS own GPL driver). Without those, half-duplex connections are very unreliable, often working on small transfers and failing after a while. Signed-off-by: Riccardo Ghetta <birrachiara@tin.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18ethtool: Don't flush n-tuple list from ethtool_reset()Ben Hutchings1-3/+0
The n-tuple list should be flushed if and only if the ETH_RESET_FILTER flag is set and the driver is able to reset filtering/flow direction hardware without also resetting a component whose flag is not set. This test is best left to the driver. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18bnx2x: version number and dateVladislav Zolotarov1-2/+2
Updated release version and date: 1.52.1-6 and 2010/02/16 Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18bnx2x: Use firmware 5.2.13Vladislav Zolotarov7-16/+28
Switch to the new firmware version (5.2.13). Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18bnx2x: FW 5.2.13Vladislav Zolotarov2-0/+23040
New firmware version (5.2.13). Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18bnx2x: fix in 57710 self-testVladislav Zolotarov1-1/+2
Bug fix: Use the last unicast entry in CAM in bnx2x_test_int(). Relevant for 57710 only. Author: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18bnx2x: Do not allow enabling LRO if disable_tpa=1Vladislav Zolotarov1-6/+8
Bug fix: Do not allow enabling LRO if disable_tpa=1. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18bnx2x: clean up in case of error in bnx2x_init_hw()Vladislav Zolotarov1-0/+3
Bug fix: clean up MCP state in case of error in bnx2x_init_hw(). Author: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18bnx2x: Properly release allocated MSI-X/MSI vectorsVladislav Zolotarov1-11/+14
Bug fix: Properly release allocated MSI-X/MSI vectors if ifup failed due to lack of memory. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18drivers/net/usb: Use netif_<level> logging facilitiesJoe Perches6-341/+264
Convert from: if (netif_msg_<foo>(priv)) dev_<level>(dev... to netif_<level>(priv, foo, dev... Also convert a few: if (i < REG_TIMEOUT) { etc... return ret; } to if (i >= REG_TIMEOUT) goto fail; etc... return ret; Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18usbnet: Convert dev(dbg|err|warn|info) macros to netdev_<level>Joe Perches11-489/+507
These macros are too similar to the dev_<level> equivalents but take a usbnet * argument. Convert them to the recently introduced netdev_<level> macros and remove the old macros. The old macros had "\n" appended to the format string. Add the "\n" to the converted uses. Some existing uses of the dev<foo> macros in cdc_eem.c probably mistakenly had trailing "\n". No "\n" added there. Fix net1080 this/other log message inversion. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18be2net: implement pci shutdown handlerSathya Perla1-0/+21
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18be2net: fix rx-path to ignore a flush completionSathya Perla1-4/+19
The flush compl (compl with numfrags == 0; no data) is rcvd from hw to indicate completion of RXQ destory operation. Fix the RX path to not process it as RX data. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18be2net: don't rearm mcc cq when device is not openSathya Perla4-2/+26
When an MCC cmd is issued (via a netdev/ethtool op) while the device is not open, the MCC CQ gets processed but the EQ is not processed (as isr is not registered.) This can cause the EQ to become full. So, while the device is not open, CQ must not be re-armed to prevent EQ entries. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18be2net: a mini optimization in rx_compl_process() codeSathya Perla1-10/+10
Introduce unlikely() for skb alloc failure and vlanf checks... Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18qlge: Fix occasional loopback test failure.Ron Mercer1-1/+6
On some servers we see the cleaning of the RX queue finish before all the loopback packets are sent out. This delay allows the queues to settle before checking for successful completion. Also, delay completion so link has time to come back up. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18qlge: Fix bonding mac address bug.Ron Mercer2-1/+7
Use local copy of current mac address when initializing. In bonding testing we saw cases where dev_addr was out of data causing failover errors. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18qlge: Fix dropping of large non-TCP/UDP frames.Ron Mercer1-15/+5
This was found with pings that were large enough to span multiple rx buffers. The split frame logic handles this case nicely. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18ll_temac: Fix MAC address configuration from userlandSteven J. Magnani1-1/+8
A userland command to set the LLTEMAC MAC address, i.e. "ifconfig eth0 hw addr xx:yy:zz:pp:dd:qq", results in a device address of 00:01:xx:yy:zz:pp. Correct this. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18ll_temac: Add support for V2 LLTEMAC coreSteven J. Magnani1-1/+4
LLTEMAC V1 cores place only received packet length in the app4 word. V2 cores place additional information in app4. Mask out the additional information when retrieving the packet length. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18net: convert multiple drivers to use netdev_for_each_mc_addrJiri Pirko8-27/+15
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18cassini: convert to use netdev_for_each_mc_addrJiri Pirko1-37/+35
Introduced a new function to do the mc list processing, makes code clearer after transition. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18net: use kasprintf() for socket cache namesAlexey Dobriyan1-8/+2
kasprintf() makes code smaller. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18xt_hashlimit: fix lockingEric Dumazet1-4/+0
Commit 2eff25c18c3d332d3c4dd98f2ac9b7114e9771b0 (netfilter: xt_hashlimit: fix race condition and simplify locking) added a mutex deadlock : htable_create() is called with hashlimit_mutex already locked Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18ipmr: remove useless checks from ipmr_device_eventPavel Emelyanov1-3/+0
The net being checked there is dev_net(dev) and thus this if is always false. Fits both net and net-next trees. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18igb: update tx DMA mapping error handlingNick Nunley1-5/+3
This updates the tx DMA mapping error handling code to resemble e1000e/ixgbe. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18igb: change descriptor control thresholdsNick Nunley1-2/+2
This change simplifies the code by setting RX_PTHRESH to 8 for all devices, as it was unlikely that there was any advantage to set it at 16 for earlier cards. Additionally TX_WTHRESH is set to 1 for the 82576 NIC to improve performance by enabling a minimal amount of write combining when writing back descriptors. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18igb: use igb_free_q_vectors to cleanup failure in igb_alloc_q_vectorsNick Nunley1-7/+3
This change makes it so that igb_free_q_vectors is reused in igb_alloc_q_vectors to handle the cleanup instead of unwinding through the allocations. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18igb: remove unused vmolr valueNick Nunley1-4/+0
In an earlier version of igb_write_mc_addr_list() the vmolr register was modified. This register is no longer accessed, although the variable still exists. This patch removes it from the function. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18igb: minor type cleanupsNick Nunley1-6/+6
This change cleans up some instances where unsigned int and u32 were being used interchangeably, and cleans up hdr_len which was being set to 0 twice. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18igb: move gso_segs into buffer_info structureNick Nunley2-1/+3
This change moves gso_segs into the buffer_info structure to avoid a possible cache line miss in clean_tx_irq. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18igb: inline igb_maybe_stop_txNick Nunley1-1/+1
igb_maybe_stop_tx() is extremely small and appears in several spots in the tx hotpath. This change inlines the function for a possible performance boost. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18igb: only read phy specific stats if in internal phy modeNick Nunley1-3/+8
There are a couple statistics registers that are not meant to be read when in SGMII/serdes mode. This patch adds a check to verify mode before reading and updating these statistics. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-27 11:43:13 +0300