summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds2463-4249/+4249
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-07Merge branch 'for-linus' of ↵Linus Torvalds8-7/+36
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add support for CH Pro Throttle HID: hid-magicmouse: Increase evdev buffer size HID: add FF support for Logitech G25/G27 HID: roccat: Add support for wireless variant of Pyra HID: Fix typo Keyoutch -> Keytouch HID: add support for Skycable 0x3f07 wireless presenter
2011-04-07fix build fail for hv_mouse indefine udelayYouquan Song1-0/+1
Fix build failure issue for hv_mouse When build 2.6.39-rc1 kernel, it will be blocked at build hv_mouse. drivers/staging/hv/hv_mouse.c: In function ‘ReleaseInputDevice’: drivers/staging/hv/hv_mouse.c:293: error: implicit declaration of function ‘udelay’ Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-07mm: avoid wrapping vm_pgoff in mremap()Linus Torvalds1-2/+9
The normal mmap paths all avoid creating a mapping where the pgoff inside the mapping could wrap around due to overflow. However, an expanding mremap() can take such a non-wrapping mapping and make it bigger and cause a wrapping condition. Noticed by Robert Swiecki when running a system call fuzzer, where it caused a BUG_ON() due to terminally confusing the vma_prio_tree code. A vma dumping patch by Hugh then pinpointed the crazy wrapped case. Reported-and-tested-by: Robert Swiecki <robert@swiecki.net> Acked-by: Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-07ALSA: hda - Don't query connections for widgets have no connectionsTakashi Iwai1-0/+3
Fixes the kernel warnings with IDT codecs like hda_codec: connection list not available for 0x1e Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-07ALSA: HDA: Fix single internal mic on ALC275 (Sony Vaio VPCSB1C5E)David Henningsson1-1/+1
In cases where there is only one internal mic connected to ADC 0x11, alc275_setup_dual_adc won't handle the case, so we need to add the ADC node to the array of candidates. Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/752792 Reported-by: Vincenzo Pii Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-07ALSA: hda - HDMI: Fix MCP7x audio infoframe checksumsAaron Plattner1-26/+44
The MCP7x hardware computes the audio infoframe channel count automatically, but requires the audio driver to set the audio infoframe checksum manually via the Nv_VERB_SET_Info_Frame_Checksum control verb. When audio starts playing, nvhdmi_8ch_7x_pcm_prepare sets the checksum to (0x71 - chan - chanmask). For example, for 2ch audio, chan == 1 and chanmask == 0 so the checksum is set to 0x70. When audio playback finishes and the device is closed, nvhdmi_8ch_7x_pcm_close resets the channel formats, causing the channel count to revert to 8ch. Since the checksum is not reset, the hardware starts generating audio infoframes with invalid checksums. This causes some displays to blank the video. Fix this by updating the checksum and channel mask when the device is closed and also when it is first initialized. In addition, make sure that the channel mask is appropriate for an 8ch infoframe by setting it to 0x13 (FL FR LFE FC RL RR RLC RRC). Signed-off-by: Aaron Plattner <aplattner@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-07x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()Feng Tang1-1/+3
The sfi_mrtc_array[] only gets initialized when the sfi mrtc table is parsed, so the vrtc_paddr should be initalized after it too. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1302140389-27603-1-git-send-email-feng.tang@intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-07rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm()Feng Tang1-3/+4
Commit f44f7f96a20 ("RTC: Initialize kernel state from RTC") caused a boot regression on the MRST platform. The reason is that rtc_device_register() calls rtc_read_alarm() after that change, which function does not have all driver data set up yet. The rtc-mrst driver needs to call dev_set_drvdata() before rtc_device_register() gets called. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1302140384-27571-1-git-send-email-feng.tang@intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-07x86-32, fpu: Fix FPU exception handling on non-SSE systemsHans Rosenfeld1-1/+1
On 32bit systems without SSE (that is, they use FSAVE/FRSTOR for FPU context switches), FPU exceptions in user mode cause Oopses, BUGs, recursive faults and other nasty things: fpu exception: 0000 [#1] last sysfs file: /sys/power/state Modules linked in: psmouse evdev pcspkr serio_raw [last unloaded: scsi_wait_scan] Pid: 1638, comm: fxsave-32-excep Not tainted 2.6.35-07798-g58a992b-dirty #633 VP3-596B-DD/VT82C597 EIP: 0060:[<c1003527>] EFLAGS: 00010202 CPU: 0 EIP is at math_error+0x1b4/0x1c8 EAX: 00000003 EBX: cf9be7e0 ECX: 00000000 EDX: cf9c5c00 ESI: cf9d9fb4 EDI: c1372db3 EBP: 00000010 ESP: cf9d9f1c DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 Process fxsave-32-excep (pid: 1638, ti=cf9d8000 task=cf9be7e0 task.ti=cf9d8000) Stack: 00000000 00000301 00000004 00000000 00000000 cf9d3000 cf9da8f0 00000001 <0> 00000004 cf9b6b60 c1019a6b c1019a79 00000020 00000242 000001b6 cf9c5380 <0> cf806b40 cf791880 00000000 00000282 00000282 c108a213 00000020 cf9c5380 Call Trace: [<c1019a6b>] ? need_resched+0x11/0x1a [<c1019a79>] ? should_resched+0x5/0x1f [<c108a213>] ? do_sys_open+0xbd/0xc7 [<c108a213>] ? do_sys_open+0xbd/0xc7 [<c100353b>] ? do_coprocessor_error+0x0/0x11 [<c12d5965>] ? error_code+0x65/0x70 Code: a8 20 74 30 c7 44 24 0c 06 00 03 00 8d 54 24 04 89 d9 b8 08 00 00 00 e8 9b 6d 02 00 eb 16 8b 93 5c 02 00 00 eb 05 e9 04 ff ff ff <9b> dd 32 9b e9 16 ff ff ff 81 c4 84 00 00 00 5b 5e 5f 5d c3 c6 EIP: [<c1003527>] math_error+0x1b4/0x1c8 SS:ESP 0068:cf9d9f1c This usually continues in slight variations until the system is reset. This bug was introduced by commit 58a992b9cbaf449aeebd3575c3695a9eb5d95b5e: x86-32, fpu: Rewrite fpu_save_init() Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com> Link: http://lkml.kernel.org/r/1302106003-366952-1-git-send-email-hans.rosenfeld@amd.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-04-07staging: usbip: bugfix for isochronous packets and optimizationArjan Mels4-14/+122
For isochronous packets the actual_length is the sum of the actual length of each of the packets, however between the packets might be padding, so it is not sufficient to just send the first actual_length bytes of the buffer. To fix this and simultanesouly optimize the bandwidth the content of the isochronous packets are send without the padding, the padding is restored on the receiving end. Signed-off-by: Arjan Mels <arjan.mels@gmx.net> Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Cc: Max Vozeler <max@vozeler.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-07staging: usbip: bugfix add number of packets for isochronous framesArjan Mels1-1/+6
The number_of_packets was not transmitted for RET_SUBMIT packets. The linux client used the stored number_of_packet from the submitted request. The windows userland client does not do this however and needs to know the number_of_packets to determine the size of the transmission. Signed-off-by: Arjan Mels <arjan.mels@gmx.net> Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Cc: Max Vozeler <max@vozeler.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-07staging: usbip: bugfixes related to kthread conversionArjan Mels1-25/+15
When doing a usb port reset do a queued reset instead to prevent a deadlock: the reset will cause the driver to unbind, causing the usb_driver_lock_for_reset to stall. Signed-off-by: Arjan Mels <arjan.mels@gmx.net> Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Cc: Max Vozeler <max@vozeler.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-07staging: usbip: fix shutdown problems.Arjan Mels1-2/+4
When shuting down the tcp_rx and tcp_tx threads first check if they are not closed already (maybe because an error caused them to return). Signed-off-by: Arjan Mels <arjan.mels@gmx.net> Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net> Cc: Max Vozeler <max@vozeler.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-07staging: hv: Fix GARP not sent after Quick MigrationHaiyang Zhang1-0/+24
After Quick Migration, the network is not immediately operational in the current context when receiving RNDIS_STATUS_MEDIA_CONNECT event. So, I added another netif_notify_peers() into a scheduled work, otherwise GARP packet will not be sent after quick migration, and cause network disconnection. Thanks to Mike Surcouf <mike@surcouf.co.uk> for reporting the bug and testing the patch. Reported-by: Mike Surcouf <mike@surcouf.co.uk> Tested-by: Mike Surcouf <mike@surcouf.co.uk> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-07MAINTAINERS: add entry for Xen network backendIan Campbell1-0/+7
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07be2net: Fix suspend/resume operationPadmanabh Ratnakar1-0/+1
eq_next_idx is not getting reset to zero during suspend. This causes resume to fail. Added the fix. Signed-off-by: Sarveswara Rao Mygapula <sarveswararao.mygapula@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07be2net: Rename some struct members for clarityPadmanabh Ratnakar2-7/+7
Renamed msix_vec_idx to eq_idx in be_eq_obj struct. Renamed msix_vec_next_idx to eq_next_idx in be_adapter structure. These members are used in INTX mode also. Signed-off-by: Sarveswara Rao Mygapula <sarveswararao.mygapula@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_devUlrich Weber1-1/+1
otherwise we loop forever if a PPPoE socket was set to PPPOX_ZOMBIE state by a PADT message when the ethernet device is going down afterwards. Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07Merge branch 'master' of ↵David S. Miller16-16/+52
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-04-07dsa/mv88e6131: add support for mv88e6085 switchPeter Korsgaard2-4/+21
The mv88e6085 is identical to the mv88e6095, except that all ports are 10/100 Mb/s, so use the existing setup code except for the cpu/dsa speed selection in _setup_port(). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07NFS: Fix a signed vs. unsigned secinfo bugBryan Schumaker1-33/+25
rpc_authflavor_t is cast from an unsigned int, but the initial code tried to use it as a signed int. I fix this by passing an rpc_authflavor_t pointer around, and returning signed integers from functions. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2011-04-07x86, hibernate: Initialize mmu_cr4_features during bootH. Peter Anvin1-0/+5
Restore the initialization of mmu_cr4_features during boot, which was removed without comment in checkin e5f15b45ddf3afa2bbbb10c7ea34fb32b6de0a0e x86: Cleanup highmap after brk is concluded thereby breaking resume from hibernate. This restores previous functionality in approximately the same place, and corrects the reading of %cr4 on pre-CPUID hardware (%cr4 exists if and only if CPUID is supported.) However, part of the problem is that the hibernate suspend/resume sequence should manage the save/restore of %cr4 explicitly. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <201104020154.57136.rjw@sisk.pl>
2011-04-07ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2)Neil Horman2-1/+6
properly record sk_rxhash in ipv6 sockets (v2) Noticed while working on another project that flows to sockets which I had open on a test systems weren't getting steered properly when I had RFS enabled. Looking more closely I found that: 1) The affected sockets were all ipv6 2) They weren't getting steered because sk->sk_rxhash was never set from the incomming skbs on that socket. This was occuring because there are several points in the IPv4 tcp and udp code which save the rxhash value when a new connection is established. Those calls to sock_rps_save_rxhash were never added to the corresponding ipv6 code paths. This patch adds those calls. Tested by myself to properly enable RFS functionalty on ipv6. Change notes: v2: Filtered UDP to only arm RFS on bound sockets (Eric Dumazet) Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06be2net: Fix a potential crash during shutdown.Ajit Khaparde1-3/+5
adapter could remain uninitialized if probe fails for some reason. A null pointer access could cause a crash if be_shutdown is called after that. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06bna: Fix for handling firmware heartbeat failureRasesh Mody1-7/+3
This patch contains a fix for gracefully handling firmware heartbeat failure instead of forcing panic. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06can: mcp251x: Allow pass IRQ flags through platform data.Enric Balletbo i Serra2-1/+4
When an interrupt occurs, the INT pin is driven low by the MCP251x controller (falling edge) but in some cases the INT pin can be connected to the MPU through a transistor or level translator which inverts this signal. In this case interrupt should be configured in rising edge. This patch adds support to pass the IRQ flags via mcp251x_platform_data. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06smsc911x: fix mac_lock acquision before calling smsc911x_mac_readEnric Balletbo i Serra1-3/+5
When SMSC911X_SAVE_MAC_ADDRESS flag is enabled the driver calls smsc911x_mac_read and smsc911x_mac_read function without acquiring mac_lock spinlock This patch fixes following warning smsc911x: Driver version 2008-10-21. ------------[ cut here ]------------ WARNING: at drivers/net/smsc911x.c:261 smsc911x_mac_read+0x24/0x220() Modules linked in: [<c0060858>] (unwind_backtrace+0x0/0xe0) from [<c009322c>] (warn_slowpath_common+0x4c/0x64) [<c009322c>] (warn_slowpath_common+0x4c/0x64) from [<c009325c>] (warn_slowpath_null+0x18/0x1c) [<c009325c>] (warn_slowpath_null+0x18/0x1c) from [<c0324bec>] (smsc911x_mac_read+0x24/0x220) [<c0324bec>] (smsc911x_mac_read+0x24/0x220) from [<c0434788>] (smsc911x_read_mac_address+0x18/0x6c) [<c0434788>] (smsc911x_read_mac_address+0x18/0x6c) from [<c0434c74>] (smsc911x_drv_probe+0x498/0x1788) [<c0434c74>] (smsc911x_drv_probe+0x498/0x1788) from [<c02d3e54>] (platform_drv_probe+0x14/0x18) [<c02d3e54>] (platform_drv_probe+0x14/0x18) from [<c02d2d60>] (driver_probe_device+0xc8/0x184) [<c02d2d60>] (driver_probe_device+0xc8/0x184) from [<c02d2e84>] (__driver_attach+0x68/0x8c) [<c02d2e84>] (__driver_attach+0x68/0x8c) from [<c02d1fc8>] (bus_for_each_dev+0x48/0x74) [<c02d1fc8>] (bus_for_each_dev+0x48/0x74) from [<c02d2660>] (bus_add_driver+0x9c/0x228) [<c02d2660>] (bus_add_driver+0x9c/0x228) from [<c02d3598>] (driver_register+0xa0/0x124) [<c02d3598>] (driver_register+0xa0/0x124) from [<c0050668>] (do_one_initcall+0x94/0x168) [<c0050668>] (do_one_initcall+0x94/0x168) from [<c0008984>] (kernel_init+0xa0/0x154) [<c0008984>] (kernel_init+0xa0/0x154) from [<c005afac>] (kernel_thread_exit+0x0/0x8) ---[ end trace 2c931a35b7885770 ]--- Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06sh: select ARCH_NO_SYSDEV_OPS.Paul Mundt1-0/+1
Now that everything that was using these interfaces has been converted to the syscore ops, prevent new code from using the old API. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06ARM: arch-shmobile: only run FSI init on respective boardsKuninori Morimoto1-5/+3
If several boards are enabled in the kernel configuration, fsi_init_pm_clock() functions from board-ap4evb.c will run on any of them. Prevent this by calling these functions from the .init_machine() callback instead of using device_initcall(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06ARM: arch-shmobile: only run HDMI init on respective boardsGuennadi Liakhovetski2-13/+8
If several boards are enabled in the kernel configuration, hdmi_init_pm_clock() functions from board-ap4evb.c and board-mackerel.c will run on any of them. Prevent this by calling these functions from the .init_machine() callback instead of using device_initcall(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Magnus Damm <damm@opensource.se> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06Revert "net/sunrpc: Use static const char arrays"Trond Myklebust1-1/+1
This reverts commit 411b5e05617593efebc06241dbc56f42150f2abe. Olga Kornievskaia reports: Problem: linux client mounting linux server using rc4-hmac-md5 enctype. gssd fails with create a context after receiving a reply from the server. Diagnose: putting printout statements in the server kernel and kerberos libraries revealed that client and server derived different integrity keys. Server kernel code was at fault due the the commit [aglo@skydive linux-pnfs]$ git show 411b5e05617593efebc06241dbc56f42150f2abe Trond: The problem is that since it relies on virt_to_page(), you cannot call sg_set_buf() for data in the const section. Reported-by: Olga Kornievskaia <aglo@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org [2.6.36+]
2011-04-06ARM: mach-shmobile: Correctly check for CONFIG_MACH_MACKERELSimon Horman2-2/+2
I made a bit of a thinko when adding Mackerel to the boards that support zboot using MMCIF. Reported-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06efifb: Add override for 11" Macbook Air 3,1Matthew Garrett1-0/+4
The 11" Macbook Air appears to claim that its stride is 1366, when it's actually 2048. Override it. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06efifb: Support overriding fields FW tells us with the DMI data.Peter Jones1-61/+88
Some machines apparently give us bogus linelength/stride/pitch data, so we need to support letting the DMI table override the supplied data. I bet you can't guess whose machines I'm talking about. Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06fb: Reduce priority of resource conflict messageMatthew Garrett1-1/+1
It's expected that efifb will conflict with a native driver, so the handover message should be informational rather than an error. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06savagefb: Remove obsolete else clause in savage_setup_i2c_busTormod Volden1-2/+1
The else clause was not needed after the cleanup in commit b8901b091db260b0f0101d6395ce5c6016835a47 Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06savagefb: Set up I2C based on chip family instead of card idTormod Volden1-5/+4
In practice this means enabling I2C (for DDC2) on all prosavage cards, like the xorg ddx does. The savage4 and savage2000 families have only one member each, so there is no change for those. Tested on TwisterK. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06savagefb: Replace magic register address with defineTormod Volden1-1/+1
MM_SERIAL1 was already defined, but not used. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06drivers/video/bfin-lq035q1-fb.c: introduce missing kfreeJulia Lawall1-1/+3
Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06video: s3c-fb: fix checkpatch errors and warningJingoo Han1-3/+5
This patch fixes the checkpatch errors listed below: ERROR: space required before the open parenthesis '(' ERROR: need consistent spacing around '+' (ctx:WxV) ERROR: space prohibited before that close parenthesis ')' Also, following warning is fixed by adding 'platid' variable which can reduce number of lines exceeding 80 characters. WARNING: line over 80 characters Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-06HID: Add support for CH Pro ThrottleJiri Kosina2-0/+2
CH Pro Throttle needs NOGET the same way as other products from the same vendor require. Reported-by: Unavowed <unavowed@vexillium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-06HID: hid-magicmouse: Increase evdev buffer sizeChase Douglas1-0/+2
The evdev buffer isn't big enough when you get many fingers on the device. Bump up the buffer to a reasonable size, matching what other multitouch devices use. Without this change, events may be discarded in the evdev buffer before they are read. Reported-by: Simon Budig <simon@budig.de> Cc: Henrik Rydberg <rydberg@euromail.se> Cc: Jiri Kosina <jkosina@suse.cz> Cc: stable@kernel.org Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-06Merge branch 'perf/urgent' of ↵Ingo Molnar2-65/+113
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent
2011-04-06KVM: move and fix substitue search for missing CPUID entriesAndre Przywara1-6/+25
If KVM cannot find an exact match for a requested CPUID leaf, the code will try to find the closest match instead of simply confessing it's failure. The implementation was meant to satisfy the CPUID specification, but did not properly check for extended and standard leaves and also didn't account for the index subleaf. Beside that this rule only applies to CPUID intercepts, which is not the only user of the kvm_find_cpuid_entry() function. So fix this algorithm and call it from kvm_emulate_cpuid(). This fixes a crash of newer Linux kernels as KVM guests on AMD Bulldozer CPUs, where bogus values were returned in response to a CPUID intercept. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-04-06KVM: fix XSAVE bit scanningAndre Przywara1-3/+3
When KVM scans the 0xD CPUID leaf for propagating the XSAVE save area leaves, it assumes that the leaves are contigious and stops at the first zero one. On AMD hardware there is a gap, though, as LWP uses leaf 62 to announce it's state save area. So lets iterate through all 64 possible leaves and simply skip zero ones to also cover later features. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-04-06KVM: Enable async page fault processingGleb Natapov1-2/+21
If asynchronous hva_to_pfn() is requested call GUP with FOLL_NOWAIT to avoid sleeping on IO. Check for hwpoison is done at the same time, otherwise check_user_page_hwpoison() will call GUP again and will put vcpu to sleep. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-04-06KVM: fix crash on irqfd deassignMichael S. Tsirkin1-1/+1
irqfd in kvm used flush_work incorrectly: it assumed that work scheduled previously can't run after flush_work, but since kvm uses a non-reentrant workqueue (by means of schedule_work) we need flush_work_sync to get that guarantee. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: Jean-Philippe Menil <jean-philippe.menil@univ-nantes.fr> Tested-by: Jean-Philippe Menil <jean-philippe.menil@univ-nantes.fr> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-04-06ALSA: usb-audio: define another USB ID for a buggy USB MIDI cableTarek Soliman1-0/+1
There are many USB MIDI cables out there that have buggy firmware that reports it can do more than 4 bytes in a packet when they can only properly handle 4 This patch adds the ID of yet another one of those cables Signed-off-by: Tarek Soliman <tarek@bashasoliman.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-06Linux 2.6.39-rc2v2.6.39-rc2Linus Torvalds1-1/+1
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-18 00:38:57 +0300