summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-16scsi: mptscsih: Fix read sense data sizeTomas Henzl1-3/+1
[ Upstream commit afe89f115e84edbc76d316759e206580a06c6973 ] The sense data buffer in sense_buf_pool is allocated with size of MPT_SENSE_BUFFER_ALLOC(64) (multiplied by req_depth) while SNS_LEN(sc)(96) is used when reading the data. That may lead to a read from unallocated area, sometimes from another (unallocated) page. To fix this, limit the read size to MPT_SENSE_BUFFER_ALLOC. Link: https://lore.kernel.org/r/20200616150446.4840-1-thenzl@redhat.com Co-developed-by: Stanislav Saner <ssaner@redhat.com> Signed-off-by: Stanislav Saner <ssaner@redhat.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16scsi: qla2xxx: Fix MPI failure AEN (8200) handlingArun Easi7-43/+186
[ Upstream commit cbb01c2f2f630f1497f703c51ff21538ae2d86b8 ] Today, upon an MPI failure AEN, on top of collecting an MPI dump, a regular firmware dump is also taken and then chip reset. This is disruptive to IOs and not required. Make the firmware dump collection, followed by chip reset, optional (not done by default). Firmware dump buffer and MPI dump buffer are independent of each other with this change and each can have dump that was taken at two different times for two different issues. The MPI dump is saved in a separate buffer and is retrieved differently from firmware dump. To collect full dump on MPI failure AEN, a module parameter is introduced: ql2xfulldump_on_mpifail (default: 0) Link: https://lore.kernel.org/r/20200331104015.24868-2-njavali@marvell.com Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16ARM: imx6: add missing put_device() call in imx6q_suspend_init()yu kuai1-4/+6
[ Upstream commit 4845446036fc9c13f43b54a65c9b757c14f5141b ] if of_find_device_by_node() succeed, imx6q_suspend_init() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16cifs: update ctime and mtime during truncateZhang Xiaoxu1-0/+9
[ Upstream commit 5618303d8516f8ac5ecfe53ee8e8bc9a40eaf066 ] As the man description of the truncate, if the size changed, then the st_ctime and st_mtime fields should be updated. But in cifs, we doesn't do it. It lead the xfstests generic/313 failed. So, add the ATTR_MTIME|ATTR_CTIME flags on attrs when change the file size Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16s390/kasan: fix early pgm check handler executionVasily Gorbik1-0/+2
[ Upstream commit 998f5bbe3dbdab81c1cfb1aef7c3892f5d24f6c7 ] Currently if early_pgm_check_handler is called it ends up in pgm check loop. The problem is that early_pgm_check_handler is instrumented by KASAN but executed without DAT flag enabled which leads to addressing exception when KASAN checks try to access shadow memory. Fix that by executing early handlers with DAT flag on under KASAN as expected. Reported-and-tested-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16drm: panel-orientation-quirks: Use generic orientation-data for Acer S1003Hans de Goede1-7/+1
[ Upstream commit a05caf9e62a85d12da27e814ac13195f4683f21c ] The Acer S1003 has proper DMI strings for sys-vendor and product-name, so we do not need to match by BIOS-date. This means that the Acer S1003 can use the generic lcd800x1280_rightside_up drm_dmi_panel_orientation_data struct which is also used by other quirks. Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-2-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16drm: panel-orientation-quirks: Add quirk for Asus T101HA panelHans de Goede1-0/+6
[ Upstream commit 6c22bc18a3b93a38018844636557ad02e588e055 ] Like the Asus T100HA the Asus T101HA also uses a panel which has been mounted 90 degrees rotated, albeit in the opposite direction. Add a quirk for this. Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200531093025.28050-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16iommu/vt-d: Don't apply gfx quirks to untrusted devicesRajat Jain1-0/+37
[ Upstream commit 67e8a5b18d41af9298db5c17193f671f235cce01 ] Currently, an external malicious PCI device can masquerade the VID:PID of faulty gfx devices, and thus apply iommu quirks to effectively disable the IOMMU restrictions for itself. Thus we need to ensure that the device we are applying quirks to, is indeed an internal trusted device. Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200622231345.29722-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16xprtrdma: Prevent dereferencing r_xprt->rx_ep after it is freedChuck Lever1-10/+23
[ Upstream commit 2acc5cae292355f5f18ad377a2a966e7f03c8fec ] r_xprt->rx_ep is known to be good while the transport's send lock is held. Otherwise additional references on rx_ep must be held when it is used outside of that lock's critical sections. For now, bump the rx_ep reference count once whenever there is at least one outstanding Receive WR. This avoids the memory bandwidth overhead of taking and releasing the reference count for every ib_post_recv() and Receive completion. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUALAneesh Kumar K.V1-1/+2
[ Upstream commit c1ed1754f271f6b7acb1bfdc8cfb62220fbed423 ] With CONFIG_DEBUG_VIRTUAL=y, __pa() checks for addr value and if it's less than PAGE_OFFSET it leads to a BUG(). #define __pa(x) ({ VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET); (unsigned long)(x) & 0x0fffffffffffffffUL; }) kernel BUG at arch/powerpc/kvm/book3s_64_mmu_radix.c:43! cpu 0x70: Vector: 700 (Program Check) at [c0000018a2187360] pc: c000000000161b30: __kvmhv_copy_tofrom_guest_radix+0x130/0x1f0 lr: c000000000161d5c: kvmhv_copy_from_guest_radix+0x3c/0x80 ... kvmhv_copy_from_guest_radix+0x3c/0x80 kvmhv_load_from_eaddr+0x48/0xc0 kvmppc_ld+0x98/0x1e0 kvmppc_load_last_inst+0x50/0x90 kvmppc_hv_emulate_mmio+0x288/0x2b0 kvmppc_book3s_radix_page_fault+0xd8/0x2b0 kvmppc_book3s_hv_page_fault+0x37c/0x1050 kvmppc_vcpu_run_hv+0xbb8/0x1080 kvmppc_vcpu_run+0x34/0x50 kvm_arch_vcpu_ioctl_run+0x2fc/0x410 kvm_vcpu_ioctl+0x2b4/0x8f0 ksys_ioctl+0xf4/0x150 sys_ioctl+0x28/0x80 system_call_exception+0x104/0x1d0 system_call_common+0xe8/0x214 kvmhv_copy_tofrom_guest_radix() uses a NULL value for to/from to indicate direction of copy. Avoid calling __pa() if the value is NULL to avoid the BUG(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Massage change log a bit to mention CONFIG_DEBUG_VIRTUAL] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200611120159.680284-1-aneesh.kumar@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16ibmvnic: continue to init in CRQ reset returns H_CLOSEDDany Madden1-2/+7
[ Upstream commit 8b40eb73509f5704a0e8cd25de0163876299f1a7 ] Continue the reset path when partner adapter is not ready or H_CLOSED is returned from reset crq. This patch allows the CRQ init to proceed to establish a valid CRQ for traffic to flow after reset. Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16ice: protect ring accesses with WRITE_ONCECiara Loftus2-5/+5
[ Upstream commit b1d95cc2391ffac0c5b27256a4fb0d2cfb021a29 ] The READ_ONCE macro is used when reading rings prior to accessing the statistics pointer. The corresponding WRITE_ONCE usage when allocating and freeing the rings to ensure protected access was not in place. Introduce this. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16i40e: protect ring accesses with READ- and WRITE_ONCECiara Loftus1-10/+19
[ Upstream commit d59e267912cd90b0adf33b4659050d831e746317 ] READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16ixgbe: protect ring accesses with READ- and WRITE_ONCECiara Loftus2-9/+17
[ Upstream commit f140ad9fe2ae16f385f8fe4dc9cf67bb4c51d794 ] READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16net: ethernet: mvneta: Add 2500BaseX support for SoCs without comphySascha Hauer1-0/+6
[ Upstream commit 1a642ca7f38992b086101fe204a1ae3c90ed8016 ] The older SoCs like Armada XP support a 2500BaseX mode in the datasheets referred to as DR-SGMII (Double rated SGMII) or HS-SGMII (High Speed SGMII). This is an upclocked 1000BaseX mode, thus PHY_INTERFACE_MODE_2500BASEX is the appropriate mode define for it. adding support for it merely means writing the correct magic value into the MVNETA_SERDES_CFG register. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphySascha Hauer1-36/+44
[ Upstream commit b4748553f53f2971e07d2619f13d461daac0f3bb ] The MVNETA_SERDES_CFG register is only available on older SoCs like the Armada XP. On newer SoCs like the Armada 38x the fields are moved to comphy. This patch moves the writes to this register next to the comphy initialization, so that depending on the SoC either comphy or MVNETA_SERDES_CFG is configured. With this we no longer write to the MVNETA_SERDES_CFG on SoCs where it doesn't exist. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16spi: spidev: fix a potential use-after-free in spidev_release()Zhenzhong Duan1-10/+10
[ Upstream commit 06096cc6c5a84ced929634b0d79376b94c65a4bd ] If an spi device is unbounded from the driver before the release process, there will be an NULL pointer reference when it's referenced in spi_slave_abort(). Fix it by checking it's already freed before reference. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Link: https://lore.kernel.org/r/20200618032125.4650-2-zhenzhong.duan@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16spi: spidev: fix a race between spidev_release and spidev_removeZhenzhong Duan1-2/+2
[ Upstream commit abd42781c3d2155868821f1b947ae45bbc33330d ] Imagine below scene, spidev is referenced after it's freed. spidev_release() spidev_remove() ... spin_lock_irq(&spidev->spi_lock); spidev->spi = NULL; spin_unlock_irq(&spidev->spi_lock); mutex_lock(&device_list_lock); dofree = (spidev->spi == NULL); if (dofree) kfree(spidev); mutex_unlock(&device_list_lock); mutex_lock(&device_list_lock); list_del(&spidev->device_entry); device_destroy(spidev_class, spidev->devt); clear_bit(MINOR(spidev->devt), minors); if (spidev->users == 0) kfree(spidev); mutex_unlock(&device_list_lock); Fix it by resetting spidev->spi in device_list_lock's protection. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Link: https://lore.kernel.org/r/20200618032125.4650-1-zhenzhong.duan@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16ALSA: hda: Intel: add missing PCI IDs for ICL-H, TGL-H and EKLPierre-Louis Bossart1-0/+8
[ Upstream commit d50313a5a0d803bcf55121a2b82086633060d05e ] Mirror PCI ids used for SOF. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200617164909.18225-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16ASoC: hdac_hda: fix memleak with regmap not freed on removePierre-Louis Bossart1-6/+10
[ Upstream commit a94eaccefea1186947c5c5451fcae2245dd7e714 ] kmemleak throws error reports on module load/unload tests, add snd_hdac_regmap_exit() in .remove(). While we are at it, also fix the error handling flow in .probe() to use snd_hdac_regmap_exit() if needed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200617164144.17859-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16ASoC: SOF: Intel: add PCI ID for CometLake-SPierre-Louis Bossart1-0/+2
[ Upstream commit 258fb4f4c34a0db9d3834aba6784d7b322176bb9 ] Mirror ID added for legacy HDaudio Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200617164755.18104-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16drm: mcde: Fix display initialization problemLinus Walleij1-1/+2
[ Upstream commit b984b6d8b52372b98cce0a6ff6c2787f50665b87 ] The following bug appeared in the MCDE driver/display initialization during the recent merge window. First the place we call drm_fbdev_generic_setup() in the wrong place: this needs to be called AFTER calling drm_dev_register() else we get this splat: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/drm_fb_helper.c:2198 drm_fbdev_generic_setup+0x164/0x1a8 mcde a0350000.mcde: Device has not been registered. Modules linked in: Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) [<c010e704>] (unwind_backtrace) from [<c010a86c>] (show_stack+0x10/0x14) [<c010a86c>] (show_stack) from [<c0414f38>] (dump_stack+0x9c/0xb0) [<c0414f38>] (dump_stack) from [<c0121c8c>] (__warn+0xb8/0xd0) [<c0121c8c>] (__warn) from [<c0121d18>] (warn_slowpath_fmt+0x74/0xb8) [<c0121d18>] (warn_slowpath_fmt) from [<c04b154c>] (drm_fbdev_generic_setup+0x164/0x1a8) [<c04b154c>] (drm_fbdev_generic_setup) from [<c04ed278>] (mcde_drm_bind+0xc4/0x160) [<c04ed278>] (mcde_drm_bind) from [<c04f06b8>] (try_to_bring_up_master+0x15c/0x1a4) (...) Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200613223027.4189309-1-linus.walleij@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16staging: wfx: fix coherency of hif_scan() prototypeJérôme Pouiller3-6/+8
[ Upstream commit 29de523a6270a308d12d21f4fecf52dac491e226 ] The function hif_scan() return the timeout for the completion of the scan request. It is the only function from hif_tx.c that return another thing than just an error code. This behavior is not coherent with the rest of file. Worse, if value returned is positive, the caller can't make say if it is a timeout or the value returned by the hardware. Uniformize API with other HIF functions, only return the error code and pass timeout with parameters. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200529121256.1045521-1-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16gpu: host1x: Detach driver on unregisterThierry Reding1-0/+9
[ Upstream commit d9a0a05bf8c76e6dc79230669a8b5d685b168c30 ] Currently when a host1x device driver is unregistered, it is not detached from the host1x controller, which means that the device will stay around and when the driver is registered again, it may bind to the old, stale device rather than the new one that was created from scratch upon driver registration. This in turn can cause various weird crashes within the driver core because it is confronted with a device that was already deleted. Fix this by detaching the driver from the host1x controller when it is unregistered. This ensures that the deleted device also is no longer present in the device list that drivers will bind to. Reported-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16drm/tegra: hub: Do not enable orphaned window groupNicolin Chen1-2/+6
[ Upstream commit ef4e417eb3ec7fe657928f10ac1d2154d8a5fb38 ] Though the unconditional enable/disable code is not a final solution, we don't want to run into a NULL pointer situation when window group doesn't link to its DC parent if the DC is disabled in Device Tree. So this patch simply adds a check to make sure that window group has a valid parent before running into tegra_windowgroup_enable/disable. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16gpu: host1x: Clean up debugfs in error handling pathChristophe JAILLET1-2/+3
[ Upstream commit 109be8b23fb2ec8e2d309325ee3b7a49eab63961 ] host1x_debug_init() must be reverted in an error handling path. This is already fixed in the remove function since commit 44156eee91ba ("gpu: host1x: Clean up debugfs on removal") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16drm/ttm: Fix dma_fence refcnt leak when adding move fenceXiyu Yang1-1/+3
[ Upstream commit 11425c4519e2c974a100fc984867046d905b9380 ] ttm_bo_add_move_fence() invokes dma_fence_get(), which returns a reference of the specified dma_fence object to "fence" with increased refcnt. When ttm_bo_add_move_fence() returns, local variable "fence" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of ttm_bo_add_move_fence(). When no_wait_gpu flag is equals to true, the function forgets to decrease the refcnt increased by dma_fence_get(), causing a refcnt leak. Fix this issue by calling dma_fence_put() when no_wait_gpu flag is equals to true. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/370221/ Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16drm/ttm: Fix dma_fence refcnt leak in ttm_bo_vm_fault_reservedXiyu Yang1-0/+2
[ Upstream commit 37cc4b95d13f311c04aa8e9daacca3905ad45ca7 ] ttm_bo_vm_fault_reserved() invokes dma_fence_get(), which returns a reference of the specified dma_fence object to "moving" with increased refcnt. When ttm_bo_vm_fault_reserved() returns, local variable "moving" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in several exception handling paths of ttm_bo_vm_fault_reserved(). When those error scenarios occur such as "err" equals to -EBUSY, the function forgets to decrease the refcnt increased by dma_fence_get(), causing a refcnt leak. Fix this issue by calling dma_fence_put() when no_wait_gpu flag is equals to true. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/370219/ Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16ARM: dts: omap4-droid4: Fix spi configuration and increase rateTony Lindgren1-1/+3
[ Upstream commit 0df12a01f4857495816b05f048c4c31439446e35 ] We can currently sometimes get "RXS timed out" errors and "EOT timed out" errors with spi transfers. These errors can be made easy to reproduce by reading the cpcap iio values in a loop while keeping the CPUs busy by also reading /dev/urandom. The "RXS timed out" errors we can fix by adding spi-cpol and spi-cpha in addition to the spi-cs-high property we already have. The "EOT timed out" errors we can fix by increasing the spi clock rate to 9.6 MHz. Looks similar MC13783 PMIC says it works at spi clock rates up to 20 MHz, so let's assume we can pick any rate up to 20 MHz also for cpcap. Cc: maemo-leste@lists.dyne.org Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16perf/x86/rapl: Fix RAPL config variable bugStephane Eranian1-1/+1
[ Upstream commit 16accae3d97f97d7f61c4ee5d0002bccdef59088 ] This patch fixes a bug introduced by: fd3ae1e1587d6 ("perf/x86/rapl: Move RAPL support to common x86 code") The Kconfig variable name was wrong. It was missing the CONFIG_ prefix. Signed-off-by: Stephane Eranian <eraniangoogle.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Kim Phillips <kim.phillips@amd.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20200528201614.250182-1-eranian@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16perf/x86/rapl: Move RAPL support to common x86 codeStephane Eranian4-8/+10
[ Upstream commit fd3ae1e1587d64ef8cc8e361903d33625458073e ] To prepare for support of both Intel and AMD RAPL. As per the AMD PPR, Fam17h support Package RAPL counters to monitor power usage. The RAPL counter operates as with Intel RAPL, and as such it is beneficial to share the code. No change in functionality. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200527224659.206129-2-eranian@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16regmap: fix alignment issueJens Thoms Toerring1-54/+46
[ Upstream commit 53d860952c8215cf9ae1ea33409c8cb71ad6ad3d ] The assembly and disassembly of data to be sent to or received from a device invoke functions regmap_format_XX() and regmap_parse_XX() that extract or insert data items from or into a buffer, using assignments. In some cases the functions are called with a buffer pointer with an odd address. On architectures with strict alignment requirements this can result in a kernel crash. The assignments have been replaced by functions that take alignment into account. Signed-off-by: Jens Thoms Toerring <jt@toerring.de> Link: https://lore.kernel.org/r/20200531095300.GA27570@toerring.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16spi: spi-fsl-dspi: Fix lockup if device is removed during SPI transferKrzysztof Kozlowski1-1/+10
[ Upstream commit 7684580d45bd3d84ed9b453a4cadf7a9a5605a3f ] During device removal, the driver should unregister the SPI controller and stop the hardware. Otherwise the dspi_transfer_one_message() could wait on completion infinitely. Additionally, calling spi_unregister_controller() first in device removal reverse-matches the probe function, where SPI controller is registered at the end. Fixes: 05209f457069 ("spi: fsl-dspi: add missing clk_disable_unprepare() in dspi_remove()") Reported-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200622110543.5035-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16spi: spi-fsl-dspi: Adding shutdown hookPeng Ma1-0/+23
[ Upstream commit dc234825997ec6ff05980ca9e2204f4ac3f8d695 ] We need to ensure dspi controller could be stopped in order for kexec to start the next kernel. So add the shutdown operation support. Signed-off-by: Peng Ma <peng.ma@nxp.com> Link: https://lore.kernel.org/r/20200424061216.27445-1-peng.ma@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16KVM: s390: reduce number of IO pins to 1Christian Borntraeger1-4/+4
[ Upstream commit 774911290c589e98e3638e73b24b0a4d4530e97c ] The current number of KVM_IRQCHIP_NUM_PINS results in an order 3 allocation (32kb) for each guest start/restart. This can result in OOM killer activity even with free swap when the memory is fragmented enough: kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0 kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu kernel: Hardware name: IBM 8562 T02 Z06 (LPAR) kernel: Call Trace: kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0) kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0 kernel: [<00000001f8687032>] dump_header+0x62/0x258 kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180 kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580 kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90 kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320 kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0 kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0 kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0 kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0 kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760 kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690 kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0 kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40 kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8 As far as I can tell s390x does not use the iopins as we bail our for anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to reduce the memory footprint. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-10leds: pca955x: Add an IBM software implementation of the PCA9552 chipEddie James1-0/+8
IBM created an implementation of the PCA9552 on a PIC16F microcontroller. The I2C device addresses are different from the hardware PCA9552, so add a new compatible string and associated platform data to be able to probe this device. OpenBMC-Staging-Count: 1 Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-10mmc: sdhci-of-aspeed: Prevent clock divider of zeroEddie James1-0/+4
The Aspeed specification forbids a clock divider of zero, which will be calculated if the parent clock is equal to the desired clock. Testing confirmed this broke the host controller. OpenBMC-Staging-Count: 1 Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-10clk: AST2600: Add mux for EMMC clockEddie James1-8/+41
The EMMC clock can be derived from either the HPLL or the MPLL. Register a clock mux so that the rate is calculated correctly based upon the parent. OpenBMC-Staging-Count: 1 Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-09Revert "ARM: dts: aspeed: tacoma: Add gpio-key definitions"Joel Stanley1-59/+0
This patch was applied twice. OpenBMC-Staging-Count: 1 Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-09Linux 5.7.8v5.7.8Greg Kroah-Hartman1-1/+1
2020-07-09efi: Make it possible to disable efivar_ssdt entirelyPeter Jones2-1/+12
commit 435d1a471598752446a72ad1201b3c980526d869 upstream. In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables are tied to specific Kconfig options. Currently this is not the case for modifying the ACPI SSDT via the efivar_ssdt kernel command line option and associated EFI variable. This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults disabled, in order to allow enabling or disabling that feature during the build. Cc: <stable@vger.kernel.org> Signed-off-by: Peter Jones <pjones@redhat.com> Link: https://lore.kernel.org/r/20200615202408.2242614-1-pjones@redhat.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09dm zoned: assign max_io_len correctlyHou Tao1-1/+1
commit 7b2377486767503d47265e4d487a63c651f6b55d upstream. The unit of max_io_len is sector instead of byte (spotted through code review), so fix it. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09mm/cma.c: use exact_nid true to fix possible per-numa cma leakBarry Song1-2/+2
commit 40366bd70bbbbf822ca224dfc227a8c8e868c44f upstream. Calling cma_declare_contiguous_nid() with false exact_nid for per-numa reservation can easily cause cma leak and various confusion. For example, mm/hugetlb.c is trying to reserve per-numa cma for gigantic pages. But it can easily leak cma and make users confused when system has memoryless nodes. In case the system has 4 numa nodes, and only numa node0 has memory. if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4 different numa nodes. since exact_nid=false in current code, all 4 numa nodes will get cma successfully from node0, but hugetlb_cma[1 to 3] will never be available to hugepage will only allocate memory from hugetlb_cma[0]. In case the system has 4 numa nodes, both numa node0&2 has memory, other nodes have no memory. if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4 different numa nodes. since exact_nid=false in current code, all 4 numa nodes will get cma successfully from node0 or 2, but hugetlb_cma[1] and [3] will never be available to hugepage as mm/hugetlb.c will only allocate memory from hugetlb_cma[0] and hugetlb_cma[2]. This causes permanent leak of the cma areas which are supposed to be used by memoryless node. Of cource we can workaround the issue by letting mm/hugetlb.c scan all cma areas in alloc_gigantic_page() even node_mask includes node0 only. that means when node_mask includes node0 only, we can get page from hugetlb_cma[1] to hugetlb_cma[3]. But this will cause kernel crash in free_gigantic_page() while it wants to free page by: cma_release(hugetlb_cma[page_to_nid(page)], page, 1 << order) On the other hand, exact_nid=false won't consider numa distance, it might be not that useful to leverage cma areas on remote nodes. I feel it is much simpler to make exact_nid true to make everything clear. After that, memoryless nodes won't be able to reserve per-numa CMA from other nodes which have memory. Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Roman Gushchin <guro@fb.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Aslan Bakirov <aslan@fb.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andreas Schaufler <andreas.schaufler@gmx.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Rik van Riel <riel@surriel.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200628074345.27228-1-song.bao.hua@hisilicon.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09mm/hugetlb.c: fix pages per hugetlb calculationMike Kravetz1-1/+1
commit 1139d336fff425f9a20374945cdd28eb44d09fa8 upstream. The routine hpage_nr_pages() was incorrectly used to calculate the number of base pages in a hugetlb page. hpage_nr_pages is designed to be called for THP pages and will return HPAGE_PMD_NR for hugetlb pages of any size. Due to the context in which hpage_nr_pages was called, it is unlikely to produce a user visible error. The routine with the incorrect call is only exercised in the case of hugetlb memory error or migration. In addition, this would need to be on an architecture which supports huge page sizes less than PMD_SIZE. And, the vma containing the huge page would also need to smaller than PMD_SIZE. Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200629185003.97202-1-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09irqchip/gic: Atomically update affinityMarc Zyngier1-11/+3
commit 005c34ae4b44f085120d7f371121ec7ded677761 upstream. The GIC driver uses a RMW sequence to update the affinity, and relies on the gic_lock_irqsave/gic_unlock_irqrestore sequences to update it atomically. But these sequences only expand into anything meaningful if the BL_SWITCHER option is selected, which almost never happens. It also turns out that using a RMW and locks is just as silly, as the GIC distributor supports byte accesses for the GICD_TARGETRn registers, which when used make the update atomic by definition. Drop the terminally broken code and replace it by a byte write. Fixes: 04c8b0f82c7d ("irqchip/gic: Make locking a BL_SWITCHER only feature") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09dma-buf: Move dma_buf_release() from fops to dentry_opsSumit Semwal1-29/+25
commit 4ab59c3c638c6c8952bf07739805d20eb6358a4d upstream. Charan Teja reported a 'use-after-free' in dmabuffs_dname [1], which happens if the dma_buf_release() is called while the userspace is accessing the dma_buf pseudo fs's dmabuffs_dname() in another process, and dma_buf_release() releases the dmabuf object when the last reference to the struct file goes away. I discussed with Arnd Bergmann, and he suggested that rather than tying the dma_buf_release() to the file_operations' release(), we can tie it to the dentry_operations' d_release(), which will be called when the last ref to the dentry is removed. The path exercised by __fput() calls f_op->release() first, and then calls dput, which eventually calls d_op->d_release(). In the 'normal' case, when no userspace access is happening via dma_buf pseudo fs, there should be exactly one fd, file, dentry and inode, so closing the fd will kill of everything right away. In the presented case, the dentry's d_release() will be called only when the dentry's last ref is released. Therefore, lets move dma_buf_release() from fops->release() to d_ops->d_release() Many thanks to Arnd for his FS insights :) [1]: https://lore.kernel.org/patchwork/patch/1238278/ Fixes: bb2bb9030425 ("dma-buf: add DMA_BUF_SET_NAME ioctls") Reported-by: syzbot+3643a18836bce555bff6@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> [5.3+] Cc: Arnd Bergmann <arnd@arndb.de> Reported-by: Charan Teja Reddy <charante@codeaurora.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Tested-by: Charan Teja Reddy <charante@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200611114418.19852-1-sumit.semwal@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09drm/amdgpu/atomfirmware: fix vram_info fetching for renoirAlex Deucher1-0/+1
commit d7a6634a4cfba073ff6a526cb4265d6e58ece234 upstream. Renoir uses integrated_system_info table v12. The table has the same layout as v11 with respect to this data. Just reuse the existing code for v12 for stable. Fixes incorrectly reported vram info in the driver output. Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09drm/amdgpu: use %u rather than %d for sclk/mclkAlex Deucher1-2/+2
commit beaf10efca64ac824240838ab1f054dfbefab5e6 upstream. Large clock values may overflow and show up as negative. Reported by prOMiNd on IRC. Acked-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09drm/amd/display: Only revalidate bandwidth on medium and fast updatesNicholas Kazlauskas1-4/+6
commit 6eb3cf2e06d22b2b08e6b0ab48cb9c05a8e1a107 upstream. [Why] Changes that are fast don't require updating DLG parameters making this call unnecessary. Considering this is an expensive call it should not be done on every flip. DML touches clocks, p-state support, DLG params and a few other DC internal flags and these aren't expected during fast. A hang has been reported with this change when called on every flip which suggests that modifying these fields is not recommended behavior on fast updates. [How] Guard the validation to only happen if update type isn't FAST. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191 Fixes: a24eaa5c51255b ("drm/amd/display: Revalidate bandwidth before commiting DC updates") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09drm/amd/powerplay: Fix NULL dereference in lock_bus() on Vega20 w/o RASIvan Mironov1-4/+7
commit 7e89e4aaa9ae83107d059c186955484b3aa6eb23 upstream. I updated my system with Radeon VII from kernel 5.6 to kernel 5.7, and following started to happen on each boot: ... BUG: kernel NULL pointer dereference, address: 0000000000000128 ... CPU: 9 PID: 1940 Comm: modprobe Tainted: G E 5.7.2-200.im0.fc32.x86_64 #1 Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 1407 04/02/2020 RIP: 0010:lock_bus+0x42/0x60 [amdgpu] ... Call Trace: i2c_smbus_xfer+0x3d/0xf0 i2c_default_probe+0xf3/0x130 i2c_detect.isra.0+0xfe/0x2b0 ? kfree+0xa3/0x200 ? kobject_uevent_env+0x11f/0x6a0 ? i2c_detect.isra.0+0x2b0/0x2b0 __process_new_driver+0x1b/0x20 bus_for_each_dev+0x64/0x90 ? 0xffffffffc0f34000 i2c_register_driver+0x73/0xc0 do_one_initcall+0x46/0x200 ? _cond_resched+0x16/0x40 ? kmem_cache_alloc_trace+0x167/0x220 ? do_init_module+0x23/0x260 do_init_module+0x5c/0x260 __do_sys_init_module+0x14f/0x170 do_syscall_64+0x5b/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... Error appears when some i2c device driver tries to probe for devices using adapter registered by `smu_v11_0_i2c_eeprom_control_init()`. Code supporting this adapter requires `adev->psp.ras.ras` to be not NULL, which is true only when `amdgpu_ras_init()` detects HW support by calling `amdgpu_ras_check_supported()`. Before 9015d60c9ee1, adapter was registered by -> amdgpu_device_ip_init() -> amdgpu_ras_recovery_init() -> amdgpu_ras_eeprom_init() -> smu_v11_0_i2c_eeprom_control_init() after verifying that `adev->psp.ras.ras` is not NULL in `amdgpu_ras_recovery_init()`. Currently it is registered unconditionally by -> amdgpu_device_ip_init() -> pp_sw_init() -> hwmgr_sw_init() -> vega20_smu_init() -> smu_v11_0_i2c_eeprom_control_init() Fix simply adds HW support check (ras == NULL => no support) before calling `smu_v11_0_i2c_eeprom_control_{init,fini}()`. Please note that there is a chance that similar fix is also required for CHIP_ARCTURUS. I do not know whether any actual Arcturus hardware without RAS exist, and whether calling `smu_i2c_eeprom_init()` makes any sense when there is no HW support. Cc: stable@vger.kernel.org Fixes: 9015d60c9ee1 ("drm/amdgpu: Move EEPROM I2C adapter to amdgpu_device") Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Tested-by: Bjorn Nostvold <bjorn.nostvold@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 14:29:21 +0300