summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-04-29iwlwifi: mvm: beacon statistics shouldn't go backwardsMordechay Goodstein1-2/+11
commit 290d5e4951832e39d10f4184610dbf09038f8483 upstream. We reset statistics also in case that we didn't reassoc so in this cases keep last beacon counter. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.1f9142751fbc.Ifbfd0f928a0a761110b8f4f2ca5483a61fb21131@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29iwlwifi: pcie: actually release queue memory in TVQMJohannes Berg1-0/+3
commit b98b33d5560a2d940f3b80f6768a6177bf3dfbc0 upstream. The iwl_trans_pcie_dyn_txq_free() function only releases the frames that may be left on the queue by calling iwl_pcie_gen2_txq_unmap(), but doesn't actually free the DMA ring or byte-count tables for the queue. This leads to pretty large memory leaks (at least before my queue size improvements), in particular in monitor/sniffer mode on channel hopping since this happens on every channel change. This was also now more evident after the move to a DMA pool for the byte count tables, showing messages such as BUG iwlwifi:bc (...): Objects remaining in iwlwifi:bc on __kmem_cache_shutdown() This fixes https://bugzilla.kernel.org/show_bug.cgi?id=206811. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 6b35ff91572f ("iwlwifi: pcie: introduce a000 TX queues management") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.f5f4c4193ec1.Id5feebc9b4318041913a9c89fc1378bb5454292c@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29SUNRPC: Fix backchannel RPC soft lockupsChuck Lever4-1/+8
commit 6221f1d9b63fed6260273e59a2b89ab30537a811 upstream. Currently, after the forward channel connection goes away, backchannel operations are causing soft lockups on the server because call_transmit_status's SOFTCONN logic ignores ENOTCONN. Such backchannel Calls are aggressively retried until the client reconnects. Backchannel Calls should use RPC_TASK_NOCONNECT rather than RPC_TASK_SOFTCONN. If there is no forward connection, the server is not capable of establishing a connection back to the client, thus that backchannel request should fail before the server attempts to send it. Commit 58255a4e3ce5 ("NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN") was merged several years before RPC_TASK_NOCONNECT was available. Because setup_callback_client() explicitly sets NOPING, the NFSv4.0 callback connection depends on the first callback RPC to initiate a connection to the client. Thus NFSv4.0 needs to continue to use RPC_TASK_SOFTCONN. Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> # v4.20+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29mac80211: populate debugfs only after cfg80211 initJohannes Berg10-25/+51
commit 6cb5f3ea4654faf8c28b901266e960b1a4787b26 upstream. When fixing the initialization race, we neglected to account for the fact that debugfs is initialized in wiphy_register(), and some debugfs things went missing (or rather were rerooted to the global debugfs root). Fix this by adding debugfs entries only after wiphy_register(). This requires some changes in the rate control code since it currently adds debugfs at alloc time, which can no longer be done after the reordering. Reported-by: Jouni Malinen <j@w1.fi> Reported-by: kernel test robot <rong.a.chen@intel.com> Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Felix Fietkau <nbd@nbd.name> Cc: stable@vger.kernel.org Fixes: 52e04b4ce5d0 ("mac80211: fix race in ieee80211_register_hw()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/20200423111344.0e00d3346f12.Iadc76a03a55093d94391fc672e996a458702875d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29ASoC: dapm: fixup dapm kcontrol widgetGyeongtaek Lee1-3/+17
commit ebf1474745b4373fdde0fcf32d9d1f369b50b212 upstream. snd_soc_dapm_kcontrol widget which is created by autodisable control should contain correct on_val, mask and shift because it is set when the widget is powered and changed value is applied on registers by following code in dapm_seq_run_coalesced(). mask |= w->mask << w->shift; if (w->power) value |= w->on_val << w->shift; else value |= w->off_val << w->shift; Shift on the mask in dapm_kcontrol_data_alloc() is removed to prevent double shift. And, on_val in dapm_kcontrol_set_value() is modified to get correct value in the dapm_seq_run_coalesced(). Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/000001d61537$b212f620$1638e260$@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29audit: check the length of userspace generated audit recordsPaul Moore1-0/+3
commit 763dafc520add02a1f4639b500c509acc0ea8e5b upstream. Commit 756125289285 ("audit: always check the netlink payload length in audit_receive_msg()") fixed a number of missing message length checks, but forgot to check the length of userspace generated audit records. The good news is that you need CAP_AUDIT_WRITE to submit userspace audit records, which is generally only given to trusted processes, so the impact should be limited. Cc: stable@vger.kernel.org Fixes: 756125289285 ("audit: always check the netlink payload length in audit_receive_msg()") Reported-by: syzbot+49e69b4d71a420ceda3e@syzkaller.appspotmail.com Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29signal: Avoid corrupting si_pid and si_uid in do_notify_parentEric W. Biederman1-1/+5
commit 61e713bdca3678e84815f2427f7a063fc353a1fc upstream. Christof Meerwald <cmeerw@cmeerw.org> writes: > Hi, > > this is probably related to commit > 7a0cf094944e2540758b7f957eb6846d5126f535 (signal: Correct namespace > fixups of si_pid and si_uid). > > With a 5.6.5 kernel I am seeing SIGCHLD signals that don't include a > properly set si_pid field - this seems to happen for multi-threaded > child processes. > > A simple test program (based on the sample from the signalfd man page): > > #include <sys/signalfd.h> > #include <signal.h> > #include <unistd.h> > #include <spawn.h> > #include <stdlib.h> > #include <stdio.h> > > #define handle_error(msg) \ > do { perror(msg); exit(EXIT_FAILURE); } while (0) > > int main(int argc, char *argv[]) > { > sigset_t mask; > int sfd; > struct signalfd_siginfo fdsi; > ssize_t s; > > sigemptyset(&mask); > sigaddset(&mask, SIGCHLD); > > if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1) > handle_error("sigprocmask"); > > pid_t chldpid; > char *chldargv[] = { "./sfdclient", NULL }; > posix_spawn(&chldpid, "./sfdclient", NULL, NULL, chldargv, NULL); > > sfd = signalfd(-1, &mask, 0); > if (sfd == -1) > handle_error("signalfd"); > > for (;;) { > s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo)); > if (s != sizeof(struct signalfd_siginfo)) > handle_error("read"); > > if (fdsi.ssi_signo == SIGCHLD) { > printf("Got SIGCHLD %d %d %d %d\n", > fdsi.ssi_status, fdsi.ssi_code, > fdsi.ssi_uid, fdsi.ssi_pid); > return 0; > } else { > printf("Read unexpected signal\n"); > } > } > } > > > and a multi-threaded client to test with: > > #include <unistd.h> > #include <pthread.h> > > void *f(void *arg) > { > sleep(100); > } > > int main() > { > pthread_t t[8]; > > for (int i = 0; i != 8; ++i) > { > pthread_create(&t[i], NULL, f, NULL); > } > } > > I tried to do a bit of debugging and what seems to be happening is > that > > /* From an ancestor pid namespace? */ > if (!task_pid_nr_ns(current, task_active_pid_ns(t))) { > > fails inside task_pid_nr_ns because the check for "pid_alive" fails. > > This code seems to be called from do_notify_parent and there we > actually have "tsk != current" (I am assuming both are threads of the > current process?) I instrumented the code with a warning and received the following backtrace: > WARNING: CPU: 0 PID: 777 at kernel/pid.c:501 __task_pid_nr_ns.cold.6+0xc/0x15 > Modules linked in: > CPU: 0 PID: 777 Comm: sfdclient Not tainted 5.7.0-rc1userns+ #2924 > Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 > RIP: 0010:__task_pid_nr_ns.cold.6+0xc/0x15 > Code: ff 66 90 48 83 ec 08 89 7c 24 04 48 8d 7e 08 48 8d 74 24 04 e8 9a b6 44 00 48 83 c4 08 c3 48 c7 c7 59 9f ac 82 e8 c2 c4 04 00 <0f> 0b e9 3fd > RSP: 0018:ffffc9000042fbf8 EFLAGS: 00010046 > RAX: 000000000000000c RBX: 0000000000000000 RCX: ffffc9000042faf4 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81193d29 > RBP: ffffc9000042fc18 R08: 0000000000000000 R09: 0000000000000001 > R10: 000000100f938416 R11: 0000000000000309 R12: ffff8880b941c140 > R13: 0000000000000000 R14: 0000000000000000 R15: ffff8880b941c140 > FS: 0000000000000000(0000) GS:ffff8880bca00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00007f2e8c0a32e0 CR3: 0000000002e10000 CR4: 00000000000006f0 > Call Trace: > send_signal+0x1c8/0x310 > do_notify_parent+0x50f/0x550 > release_task.part.21+0x4fd/0x620 > do_exit+0x6f6/0xaf0 > do_group_exit+0x42/0xb0 > get_signal+0x13b/0xbb0 > do_signal+0x2b/0x670 > ? __audit_syscall_exit+0x24d/0x2b0 > ? rcu_read_lock_sched_held+0x4d/0x60 > ? kfree+0x24c/0x2b0 > do_syscall_64+0x176/0x640 > ? trace_hardirqs_off_thunk+0x1a/0x1c > entry_SYSCALL_64_after_hwframe+0x49/0xb3 The immediate problem is as Christof noticed that "pid_alive(current) == false". This happens because do_notify_parent is called from the last thread to exit in a process after that thread has been reaped. The bigger issue is that do_notify_parent can be called from any process that manages to wait on a thread of a multi-threaded process from wait_task_zombie. So any logic based upon current for do_notify_parent is just nonsense, as current can be pretty much anything. So change do_notify_parent to call __send_signal directly. Inspecting the code it appears this problem has existed since the pid namespace support started handling this case in 2.6.30. This fix only backports to 7a0cf094944e ("signal: Correct namespace fixups of si_pid and si_uid") where the problem logic was moved out of __send_signal and into send_signal. Cc: stable@vger.kernel.org Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary") Ref: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals") Link: https://lore.kernel.org/lkml/20200419201336.GI22017@edge.cmeerw.net/ Reported-by: Christof Meerwald <cmeerw@cmeerw.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29usb-storage: Add unusual_devs entry for JMicron JMS566Alan Stern1-0/+7
commit 94f9c8c3c404ee1f7aaff81ad4f24aec4e34a78b upstream. Cyril Roelandt reports that his JMicron JMS566 USB-SATA bridge fails to handle WRITE commands with the FUA bit set, even though it claims to support FUA. (Oddly enough, a later version of the same bridge, version 2.03 as opposed to 1.14, doesn't claim to support FUA. Also oddly, the bridge _does_ support FUA when using the UAS transport instead of the Bulk-Only transport -- but this device was blacklisted for uas in commit bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") for apparently unrelated reasons.) This patch adds a usb-storage unusual_devs entry with the BROKEN_FUA flag. This allows the bridge to work properly with usb-storage. Reported-and-tested-by: Cyril Roelandt <tipecaml@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221613110.11262-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29tty: rocket, avoid OOB accessJiri Slaby1-11/+14
commit 7127d24372bf23675a36edc64d092dc7fd92ebe8 upstream. init_r_port can access pc104 array out of bounds. pc104 is a 2D array defined to have 4 members. Each member has 8 submembers. * we can have more than 4 (PCI) boards, i.e. [board] can be OOB * line is not modulo-ed by anything, so the first line on the second board can be 4, on the 3rd 12 or alike (depending on previously registered boards). It's zero only on the first line of the first board. So even [line] can be OOB, quite soon (with the 2nd registered board already). This code is broken for ages, so just avoid the OOB accesses and don't try to fix it as we would need to find out the correct line number. Use the default: RS232, if we are out. Generally, if anyone needs to set the interface types, a module parameter is past the last thing that should be used for this purpose. The parameters' description says it's for ISA cards anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: stable <stable@vger.kernel.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/20200417105959.15201-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29tty: hvc: fix buffer overflow during hvc_alloc().Andrew Melnychenko1-9/+14
commit 9a9fc42b86c06120744555fea43fdcabe297c656 upstream. If there is a lot(more then 16) of virtio-console devices or virtio_console module is reloaded - buffers 'vtermnos' and 'cons_ops' are overflowed. In older kernels it overruns spinlock which leads to kernel freezing: https://bugzilla.redhat.com/show_bug.cgi?id=1786239 To reproduce the issue, you can try simple script that loads/unloads module. Something like this: while [ 1 ] do modprobe virtio_console sleep 2 modprobe -r virtio_console sleep 2 done Description of problem: Guest get 'Call Trace' when loading module "virtio_console" and unloading it frequently - clearly reproduced on kernel-4.18.0: [ 81.498208] ------------[ cut here ]------------ [ 81.499263] pvqspinlock: lock 0xffffffff92080020 has corrupted value 0xc0774ca0! [ 81.501000] WARNING: CPU: 0 PID: 785 at kernel/locking/qspinlock_paravirt.h:500 __pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.503173] Modules linked in: virtio_console fuse xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nft_objref nf_conntrack_tftp tun bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 nft_chain_route_ipv6 nft_chain_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nft_chain_route_ipv4 ip6_tables nft_compat ip_set nf_tables nfnetlink sunrpc bochs_drm drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm i2c_piix4 pcspkr crct10dif_pclmul crc32_pclmul joydev ghash_clmulni_intel ip_tables xfs libcrc32c sd_mod sg ata_generic ata_piix virtio_net libata crc32c_intel net_failover failover serio_raw virtio_scsi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: virtio_console] [ 81.517019] CPU: 0 PID: 785 Comm: kworker/0:2 Kdump: loaded Not tainted 4.18.0-167.el8.x86_64 #1 [ 81.518639] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 81.520205] Workqueue: events control_work_handler [virtio_console] [ 81.521354] RIP: 0010:__pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.522450] Code: 07 00 48 63 7a 10 e8 bf 64 f5 ff 66 90 c3 8b 05 e6 cf d6 01 85 c0 74 01 c3 8b 17 48 89 fe 48 c7 c7 38 4b 29 91 e8 3a 6c fa ff <0f> 0b c3 0f 0b 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 [ 81.525830] RSP: 0018:ffffb51a01ffbd70 EFLAGS: 00010282 [ 81.526798] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000 [ 81.528110] RDX: ffff9e66f1826480 RSI: ffff9e66f1816a08 RDI: ffff9e66f1816a08 [ 81.529437] RBP: ffffffff9153ff10 R08: 000000000000026c R09: 0000000000000053 [ 81.530732] R10: 0000000000000000 R11: ffffb51a01ffbc18 R12: ffff9e66cd682200 [ 81.532133] R13: ffffffff9153ff10 R14: ffff9e6685569500 R15: ffff9e66cd682000 [ 81.533442] FS: 0000000000000000(0000) GS:ffff9e66f1800000(0000) knlGS:0000000000000000 [ 81.534914] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 81.535971] CR2: 00005624c55b14d0 CR3: 00000003a023c000 CR4: 00000000003406f0 [ 81.537283] Call Trace: [ 81.537763] __raw_callee_save___pv_queued_spin_unlock_slowpath+0x11/0x20 [ 81.539011] .slowpath+0x9/0xe [ 81.539585] hvc_alloc+0x25e/0x300 [ 81.540237] init_port_console+0x28/0x100 [virtio_console] [ 81.541251] handle_control_message.constprop.27+0x1c4/0x310 [virtio_console] [ 81.542546] control_work_handler+0x70/0x10c [virtio_console] [ 81.543601] process_one_work+0x1a7/0x3b0 [ 81.544356] worker_thread+0x30/0x390 [ 81.545025] ? create_worker+0x1a0/0x1a0 [ 81.545749] kthread+0x112/0x130 [ 81.546358] ? kthread_flush_work_fn+0x10/0x10 [ 81.547183] ret_from_fork+0x22/0x40 [ 81.547842] ---[ end trace aa97649bd16c8655 ]--- [ 83.546539] general protection fault: 0000 [#1] SMP NOPTI [ 83.547422] CPU: 5 PID: 3225 Comm: modprobe Kdump: loaded Tainted: G W --------- - - 4.18.0-167.el8.x86_64 #1 [ 83.549191] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 83.550544] RIP: 0010:__pv_queued_spin_lock_slowpath+0x19a/0x2a0 [ 83.551504] Code: c4 c1 ea 12 41 be 01 00 00 00 4c 8d 6d 14 41 83 e4 03 8d 42 ff 49 c1 e4 05 48 98 49 81 c4 40 a5 02 00 4c 03 24 c5 60 48 34 91 <49> 89 2c 24 b8 00 80 00 00 eb 15 84 c0 75 0a 41 0f b6 54 24 14 84 [ 83.554449] RSP: 0018:ffffb51a0323fdb0 EFLAGS: 00010202 [ 83.555290] RAX: 000000000000301c RBX: ffffffff92080020 RCX: 0000000000000001 [ 83.556426] RDX: 000000000000301d RSI: 0000000000000000 RDI: 0000000000000000 [ 83.557556] RBP: ffff9e66f196a540 R08: 000000000000028a R09: ffff9e66d2757788 [ 83.558688] R10: 0000000000000000 R11: 0000000000000000 R12: 646e61725f770b07 [ 83.559821] R13: ffff9e66f196a554 R14: 0000000000000001 R15: 0000000000180000 [ 83.560958] FS: 00007fd5032e8740(0000) GS:ffff9e66f1940000(0000) knlGS:0000000000000000 [ 83.562233] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 83.563149] CR2: 00007fd5022b0da0 CR3: 000000038c334000 CR4: 00000000003406e0 Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200414191503.3471783-1-andrew@daynix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29KVM: VMX: Enable machine check support for 32bit targetsUros Bizjak1-1/+1
commit fb56baae5ea509e63c2a068d66a4d8ea91969fca upstream. There is no reason to limit the use of do_machine_check to 64bit targets. MCE handling works for both target familes. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Fixes: a0861c02a981 ("KVM: Add VT-x machine check support") Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Message-Id: <20200414071414.45636-1-ubizjak@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29KVM: Check validity of resolved slot when searching memslotsSean Christopherson1-1/+1
commit b6467ab142b708dd076f6186ca274f14af379c72 upstream. Check that the resolved slot (somewhat confusingly named 'start') is a valid/allocated slot before doing the final comparison to see if the specified gfn resides in the associated slot. The resolved slot can be invalid if the binary search loop terminated because the search index was incremented beyond the number of used slots. This bug has existed since the binary search algorithm was introduced, but went unnoticed because KVM statically allocated memory for the max number of slots, i.e. the access would only be truly out-of-bounds if all possible slots were allocated and the specified gfn was less than the base of the lowest memslot. Commit 36947254e5f98 ("KVM: Dynamically size memslot array based on number of used slots") eliminated the "all possible slots allocated" condition and made the bug embarrasingly easy to hit. Fixes: 9c1a5d38780e6 ("kvm: optimize GFN to memslot lookup with large slots amount") Reported-by: syzbot+d889b59b2bb87d4047a2@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200408064059.8957-2-sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29KVM: s390: Return last valid slot if approx index is out-of-boundsSean Christopherson1-0/+3
commit 97daa028f3f621adff2c4f7b15fe0874e5b5bd6c upstream. Return the index of the last valid slot from gfn_to_memslot_approx() if its binary search loop yielded an out-of-bounds index. The index can be out-of-bounds if the specified gfn is less than the base of the lowest memslot (which is also the last valid memslot). Note, the sole caller, kvm_s390_get_cmma(), ensures used_slots is non-zero. Fixes: afdad61615cc3 ("KVM: s390: Fix storage attributes migration with memory slots") Cc: stable@vger.kernel.org # 4.19.x: 0774a964ef56: KVM: Fix out of range accesses to memslots Cc: stable@vger.kernel.org # 4.19.x Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200408064059.8957-3-sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29tpm: ibmvtpm: retry on H_CLOSED in tpm_ibmvtpm_send()George Wilson1-63/+73
commit eba5cf3dcb844c82f54d4a857e124824e252206d upstream. tpm_ibmvtpm_send() can fail during PowerVM Live Partition Mobility resume with an H_CLOSED return from ibmvtpm_send_crq(). The PAPR says, 'The "partner partition suspended" transport event disables the associated CRQ such that any H_SEND_CRQ hcall() to the associated CRQ returns H_Closed until the CRQ has been explicitly enabled using the H_ENABLE_CRQ hcall.' This patch adds a check in tpm_ibmvtpm_send() for an H_CLOSED return from ibmvtpm_send_crq() and in that case calls tpm_ibmvtpm_resume() and retries the ibmvtpm_send_crq() once. Cc: stable@vger.kernel.org # 3.7.x Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Reported-by: Linh Pham <phaml@us.ibm.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: George Wilson <gcwilson@linux.ibm.com> Tested-by: Linh Pham <phaml@us.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29tpm: fix wrong return value in tpm_pcr_extendTianjia Zhang1-1/+1
commit 29cb79795e324a8b65e7891d76f8f6ca911ba440 upstream. For the algorithm that does not match the bank, a positive value EINVAL is returned here. I think this is a typo error. It is necessary to return an error value. Cc: stable@vger.kernel.org # 5.4.x Fixes: 9f75c8224631 ("KEYS: trusted: correctly initialize digests and fix locking issue") Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29tpm/tpm_tis: Free IRQ if probing failsJarkko Sakkinen1-1/+7
commit b160c94be5d2816b62c8ac338605668304242959 upstream. Call disable_interrupts() if we have to revert to polling in order not to unnecessarily reserve the IRQ for the life-cycle of the driver. Cc: stable@vger.kernel.org # 4.5.x Reported-by: Hans de Goede <hdegoede@redhat.com> Fixes: e3837e74a06d ("tpm_tis: Refactor the interrupt setup") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29ALSA: usb-audio: Filter out unsupported sample rates on Focusrite devicesAlexander Tsoy1-0/+52
commit 1c826792586f526a5a5cd21d55aad388f5bb0b23 upstream. Many Focusrite devices supports a limited set of sample rates per altsetting. These includes audio interfaces with ADAT ports: - Scarlett 18i6, 18i8 1st gen, 18i20 1st gen; - Scarlett 18i8 2nd gen, 18i20 2nd gen; - Scarlett 18i8 3rd gen, 18i20 3rd gen; - Clarett 2Pre USB, 4Pre USB, 8Pre USB. Maximum rate is exposed in the last 4 bytes of Format Type descriptor which has a non-standard bLength = 10. Tested-by: Alexey Skobkin <skobkin-ru@ya.ru> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200418175815.12211-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29ALSA: usb-audio: Fix usb audio refcnt leak when getting spdifXiyu Yang1-4/+8
commit 59e1947ca09ebd1cae147c08c7c41f3141233c84 upstream. snd_microii_spdif_default_get() invokes snd_usb_lock_shutdown(), which increases the refcount of the snd_usb_audio object "chip". When snd_microii_spdif_default_get() returns, local variable "chip" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in several exception handling paths of snd_microii_spdif_default_get(). When those error scenarios occur such as usb_ifnum_to_if() returns NULL, the function forgets to decrease the refcnt increased by snd_usb_lock_shutdown(), causing a refcnt leak. Fix this issue by jumping to "end" label when those error scenarios occur. Fixes: 447d6275f0c2 ("ALSA: usb-audio: Add sanity checks for endpoint accesses") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1587617711-13200-1-git-send-email-xiyuyang19@fudan.edu.cn Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29ALSA: hda/hdmi: Add module option to disable audio component bindingTakashi Iwai1-0/+9
commit b392350ec3f229ad9603d3816f753479e441d99a upstream. As the recent regression showed, we want sometimes to turn off the audio component binding just for debugging. This patch adds the module option to control it easily without compilation. Fixes: ade49db337a9 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207223 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200415162523.27499-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29ALSA: hda/realtek - Add new codec supported for ALC245Kailang Yang1-0/+3
commit 7fbdcd8301a84c09cebfa64f1317a6dafeec9188 upstream. Enable new codec supported for ALC245. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/8c0804738b2c42439f59c39c8437817f@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29ALSA: hda/realtek - Fix unexpected init_amp overrideTakashi Iwai1-3/+5
commit 67791202c5e069cf2ba51db0718d56c634709e78 upstream. The commit 1c76aa5fb48d ("ALSA: hda/realtek - Allow skipping spec->init_amp detection") changed the way to assign spec->init_amp field that specifies the way to initialize the amp. Along with the change, the commit also replaced a few fixups that set spec->init_amp in HDA_FIXUP_ACT_PROBE with HDA_FIXUP_ACT_PRE_PROBE. This was rather aligning to the other fixups, and not supposed to change the actual behavior. However, this change turned out to cause a regression on FSC S7020, which hit exactly the above. The reason was that there is still one place that overrides spec->init_amp after HDA_FIXUP_ACT_PRE_PROBE call, namely in alc_ssid_check(). This patch fixes the regression by adding the proper spec->init_amp override check, i.e. verifying whether it's still ALC_INIT_UNDEFINED. Fixes: 1c76aa5fb48d ("ALSA: hda/realtek - Allow skipping spec->init_amp detection") Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207329 Link: https://lore.kernel.org/r/20200418190639.10082-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29ALSA: usx2y: Fix potential NULL dereferenceTakashi Iwai1-0/+2
commit 7686e3485253635c529cdd5f416fc640abaf076f upstream. The error handling code in usX2Y_rate_set() may hit a potential NULL dereference when an error occurs before allocating all us->urb[]. Add a proper NULL check for fixing the corner case. Reported-by: Lin Yi <teroincn@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200420075529.27203-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29tools/vm: fix cross-compile buildLucas Stach1-0/+2
commit cf01699ee220c38099eb3e43ce3d10690c8b7060 upstream. Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved the setup of the CC variable to tools/scripts/Makefile.include to make the behavior consistent across all the tools Makefiles. As the vm tools missed the include we end up with the wrong CC in a cross-compiling evironment. Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Martin Kelly <martin@martingkelly.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29mm/ksm: fix NULL pointer dereference when KSM zero page is enabledMuchun Song1-2/+10
commit 56df70a63ed5d989c1d36deee94cae14342be6e9 upstream. find_mergeable_vma() can return NULL. In this case, it leads to a crash when we access vm_mm(its offset is 0x40) later in write_protect_page. And this case did happen on our server. The following call trace is captured in kernel 4.19 with the following patch applied and KSM zero page enabled on our server. commit e86c59b1b12d ("mm/ksm: improve deduplication of zero pages with colouring") So add a vma check to fix it. BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 Oops: 0000 [#1] SMP NOPTI CPU: 9 PID: 510 Comm: ksmd Kdump: loaded Tainted: G OE 4.19.36.bsk.9-amd64 #4.19.36.bsk.9 RIP: try_to_merge_one_page+0xc7/0x760 Code: 24 58 65 48 33 34 25 28 00 00 00 89 e8 0f 85 a3 06 00 00 48 83 c4 60 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 8b 46 08 a8 01 75 b8 <49> 8b 44 24 40 4c 8d 7c 24 20 b9 07 00 00 00 4c 89 e6 4c 89 ff 48 RSP: 0018:ffffadbdd9fffdb0 EFLAGS: 00010246 RAX: ffffda83ffd4be08 RBX: ffffda83ffd4be40 RCX: 0000002c6e800000 RDX: 0000000000000000 RSI: ffffda83ffd4be40 RDI: 0000000000000000 RBP: ffffa11939f02ec0 R08: 0000000094e1a447 R09: 00000000abe76577 R10: 0000000000000962 R11: 0000000000004e6a R12: 0000000000000000 R13: ffffda83b1e06380 R14: ffffa18f31f072c0 R15: ffffda83ffd4be40 FS: 0000000000000000(0000) GS:ffffa0da43b80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 0000002c77c0a003 CR4: 00000000007626e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ksm_scan_thread+0x115e/0x1960 kthread+0xf5/0x130 ret_from_fork+0x1f/0x30 [songmuchun@bytedance.com: if the vma is out of date, just exit] Link: http://lkml.kernel.org/r/20200416025034.29780-1-songmuchun@bytedance.com [akpm@linux-foundation.org: add the conventional braces, replace /** with /*] Fixes: e86c59b1b12d ("mm/ksm: improve deduplication of zero pages with colouring") Co-developed-by: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Hugh Dickins <hughd@google.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Cc: Markus Elfring <Markus.Elfring@web.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416025034.29780-1-songmuchun@bytedance.com Link: http://lkml.kernel.org/r/20200414132905.83819-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29mm/hugetlb: fix a addressing exception caused by huge_pte_offsetLongpeng1-6/+8
commit 3c1d7e6ccb644d517a12f73a7ff200870926f865 upstream. Our machine encountered a panic(addressing exception) after run for a long time and the calltrace is: RIP: hugetlb_fault+0x307/0xbe0 RSP: 0018:ffff9567fc27f808 EFLAGS: 00010286 RAX: e800c03ff1258d48 RBX: ffffd3bb003b69c0 RCX: e800c03ff1258d48 RDX: 17ff3fc00eda72b7 RSI: 00003ffffffff000 RDI: e800c03ff1258d48 RBP: ffff9567fc27f8c8 R08: e800c03ff1258d48 R09: 0000000000000080 R10: ffffaba0704c22a8 R11: 0000000000000001 R12: ffff95c87b4b60d8 R13: 00005fff00000000 R14: 0000000000000000 R15: ffff9567face8074 FS: 00007fe2d9ffb700(0000) GS:ffff956900e40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffd3bb003b69c0 CR3: 000000be67374000 CR4: 00000000003627e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: follow_hugetlb_page+0x175/0x540 __get_user_pages+0x2a0/0x7e0 __get_user_pages_unlocked+0x15d/0x210 __gfn_to_pfn_memslot+0x3c5/0x460 [kvm] try_async_pf+0x6e/0x2a0 [kvm] tdp_page_fault+0x151/0x2d0 [kvm] ... kvm_arch_vcpu_ioctl_run+0x330/0x490 [kvm] kvm_vcpu_ioctl+0x309/0x6d0 [kvm] do_vfs_ioctl+0x3f0/0x540 SyS_ioctl+0xa1/0xc0 system_call_fastpath+0x22/0x27 For 1G hugepages, huge_pte_offset() wants to return NULL or pudp, but it may return a wrong 'pmdp' if there is a race. Please look at the following code snippet: ... pud = pud_offset(p4d, addr); if (sz != PUD_SIZE && pud_none(*pud)) return NULL; /* hugepage or swap? */ if (pud_huge(*pud) || !pud_present(*pud)) return (pte_t *)pud; pmd = pmd_offset(pud, addr); if (sz != PMD_SIZE && pmd_none(*pmd)) return NULL; /* hugepage or swap? */ if (pmd_huge(*pmd) || !pmd_present(*pmd)) return (pte_t *)pmd; ... The following sequence would trigger this bug: - CPU0: sz = PUD_SIZE and *pud = 0 , continue - CPU0: "pud_huge(*pud)" is false - CPU1: calling hugetlb_no_page and set *pud to xxxx8e7(PRESENT) - CPU0: "!pud_present(*pud)" is false, continue - CPU0: pmd = pmd_offset(pud, addr) and maybe return a wrong pmdp However, we want CPU0 to return NULL or pudp in this case. We must make sure there is exactly one dereference of pud and pmd. Signed-off-by: Longpeng <longpeng2@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200413010342.771-1-longpeng2@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29coredump: fix null pointer dereference on coredumpSudip Mukherjee1-0/+2
commit db973a7289dad24e6c017dcedc6aee886579dc3a upstream. If the core_pattern is set to "|" and any process segfaults then we get a null pointer derefernce while trying to coredump. The call stack shows: RIP: do_coredump+0x628/0x11c0 When the core_pattern has only "|" there is no use of trying the coredump and we can check that while formating the corename and exit with an error. After this change I get: format_corename failed Aborting core Fixes: 315c69261dd3 ("coredump: split pipe command whitespace before expanding template") Reported-by: Matthew Ruffell <matthew.ruffell@canonical.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Paul Wise <pabs3@bonedaddy.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200416194612.21418-1-sudipm.mukherjee@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29staging: gasket: Fix incongruency in handling of sysfs entries creationLuis Mendes2-6/+1
commit 9195d762042b0e5e4ded63606b4b30a93cba4400 upstream. Fix incongruency in handling of sysfs entries creation. This issue could cause invalid memory accesses, by not properly detecting the end of the sysfs attributes array. Fixes: 84c45d5f3bf1 ("staging: gasket: Replace macro __ATTR with __ATTR_NULL") Signed-off-by: Luis Mendes <luis.p.mendes@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200403151534.20753-1-luis.p.mendes@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29vmalloc: fix remap_vmalloc_range() bounds checksJann Horn4-7/+18
commit bdebd6a2831b6fab69eb85cee74a8ba77f1a1cc2 upstream. remap_vmalloc_range() has had various issues with the bounds checks it promises to perform ("This function checks that addr is a valid vmalloc'ed area, and that it is big enough to cover the vma") over time, e.g.: - not detecting pgoff<<PAGE_SHIFT overflow - not detecting (pgoff<<PAGE_SHIFT)+usize overflow - not checking whether addr and addr+(pgoff<<PAGE_SHIFT) are the same vmalloc allocation - comparing a potentially wildly out-of-bounds pointer with the end of the vmalloc region In particular, since commit fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY"), unprivileged users can cause kernel null pointer dereferences by calling mmap() on a BPF map with a size that is bigger than the distance from the start of the BPF map to the end of the address space. This could theoretically be used as a kernel ASLR bypass, by using whether mmap() with a given offset oopses or returns an error code to perform a binary search over the possible address range. To allow remap_vmalloc_range_partial() to verify that addr and addr+(pgoff<<PAGE_SHIFT) are in the same vmalloc region, pass the offset to remap_vmalloc_range_partial() instead of adding it to the pointer in remap_vmalloc_range(). In remap_vmalloc_range_partial(), fix the check against get_vm_area_size() by using size comparisons instead of pointer comparisons, and add checks for pgoff. Fixes: 833423143c3a ("[PATCH] mm: introduce remap_vmalloc_range()") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@chromium.org> Link: http://lkml.kernel.org/r/20200415222312.236431-1-jannh@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29tty: serial: owl: add "much needed" clk_prepare_enable()Amit Singh Tomar1-0/+7
commit abf42d2f333b21bf8d33b2fbb8a85fa62037ac01 upstream. commit 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit") breaks the UART on Cubieboard7-lite (based on S700 SoC), This is due to the fact that generic clk routine clk_disable_unused() disables the gate clks, and that in turns disables OWL UART (but UART driver never enables it). To prove this theory, Andre suggested to use "clk_ignore_unused" in kernel commnd line and it worked (Kernel happily lands into RAMFS world :)). This commit fix this up by adding clk_prepare_enable(). Fixes: 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit") Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1587067917-1400-1-git-send-email-amittomer25@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29USB: hub: Revert commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme ↵Alan Stern2-5/+2
first for high speed devices") commit 3155f4f40811c5d7e3c686215051acf504e05565 upstream. Commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices") changed the way the hub driver enumerates high-speed devices. Instead of using the "new" enumeration scheme first and switching to the "old" scheme if that doesn't work, we start with the "old" scheme. In theory this is better because the "old" scheme is slightly faster -- it involves resetting the device only once instead of twice. However, for a long time Windows used only the "new" scheme. Zeng Tao said that Windows 8 and later use the "old" scheme for high-speed devices, but apparently there are some devices that don't like it. William Bader reports that the Ricoh webcam built into his Sony Vaio laptop not only doesn't enumerate under the "old" scheme, it gets hung up so badly that it won't then enumerate under the "new" scheme! Only a cold reset will fix it. Therefore we will revert the commit and go back to trying the "new" scheme first for high-speed devices. Reported-and-tested-by: William Bader <williambader@hotmail.com> Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207219 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices") CC: Zeng Tao <prime.zeng@hisilicon.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221611230.11262-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29USB: hub: Fix handling of connect changes during sleepAlan Stern1-0/+14
commit 9f952e26295d977dbfc6fedeaf8c4f112c818d37 upstream. Commit 8099f58f1ecd ("USB: hub: Don't record a connect-change event during reset-resume") wasn't very well conceived. The problem it tried to fix was that if a connect-change event occurred while the system was asleep (such as a device disconnecting itself from the bus when it is suspended and then reconnecting when it resumes) requiring a reset-resume during the system wakeup transition, the hub port's change_bit entry would remain set afterward. This would cause the hub driver to believe another connect-change event had occurred after the reset-resume, which was wrong and would lead the driver to send unnecessary requests to the device (which could interfere with a firmware update). The commit tried to fix this by not setting the change_bit during the wakeup. But this was the wrong thing to do; it means that when a device is unplugged while the system is asleep, the hub driver doesn't realize anything has happened: The change_bit flag which would tell it to handle the disconnect event is clear. The commit needs to be reverted and the problem fixed in a different way. Fortunately an alternative solution was noted in the commit's Changelog: We can continue to set the change_bit entry in hub_activate() but then clear it when a reset-resume occurs. That way the the hub driver will see the change_bit when a device is disconnected but won't see it when the device is still present. That's what this patch does. Reported-and-tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 8099f58f1ecd ("USB: hub: Don't record a connect-change event during reset-resume") Tested-by: Paul Zimmerman <pauldzim@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221602480.11262-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29USB: core: Fix free-while-in-use bug in the USB S-GlibraryAlan Stern1-1/+8
commit 056ad39ee9253873522f6469c3364964a322912b upstream. FuzzUSB (a variant of syzkaller) found a free-while-still-in-use bug in the USB scatter-gather library: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] BUG: KASAN: use-after-free in usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27 CPU: 1 PID: 27 Comm: kworker/u4:1 Not tainted 5.5.11 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: scsi_tmf_2 scmd_eh_abort_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x153/0x1cb mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x152/0x1b0 mm/kasan/generic.c:192 __kasan_check_read+0x11/0x20 mm/kasan/common.c:95 atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 usb_unlink_urb+0x72/0xb0 drivers/usb/core/urb.c:657 usb_sg_cancel+0x14e/0x290 drivers/usb/core/message.c:602 usb_stor_stop_transport+0x5e/0xa0 drivers/usb/storage/transport.c:937 This bug occurs when cancellation of the S-G transfer races with transfer completion. When that happens, usb_sg_cancel() may continue to access the transfer's URBs after usb_sg_wait() has freed them. The bug is caused by the fact that usb_sg_cancel() does not take any sort of reference to the transfer, and so there is nothing to prevent the URBs from being deallocated while the routine is trying to use them. The fix is to take such a reference by incrementing the transfer's io->count field while the cancellation is in progres and decrementing it afterward. The transfer's URBs are not deallocated until io->complete is triggered, which happens when io->count reaches zero. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2003281615140.14837-100000@netrider.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29USB: early: Handle AMD's spec-compliant identifiers, tooJann Horn2-6/+20
commit 7dbdb53d72a51cea9b921d9dbba54be00752212a upstream. This fixes a bug that causes the USB3 early console to freeze after printing a single line on AMD machines because it can't parse the Transfer TRB properly. The spec at https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf says in section "4.5.1 Device Context Index" that the Context Index, also known as Endpoint ID according to section "1.6 Terms and Abbreviations", is normally computed as `DCI = (Endpoint Number * 2) + Direction`, which matches the current definitions of XDBC_EPID_OUT and XDBC_EPID_IN. However, the numbering in a Debug Capability Context data structure is supposed to be different: Section "7.6.3.2 Endpoint Contexts and Transfer Rings" explains that a Debug Capability Context data structure has the endpoints mapped to indices 0 and 1. Change XDBC_EPID_OUT/XDBC_EPID_IN to the spec-compliant values, add XDBC_EPID_OUT_INTEL/XDBC_EPID_IN_INTEL with Intel's incorrect values, and let xdbc_handle_tx_event() handle both. I have verified that with this patch applied, the USB3 early console works on both an Intel and an AMD machine. Fixes: aeb9dd1de98c ("usb/early: Add driver for xhci debug capability") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20200401074619.8024-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 ↵Jonathan Cox1-0/+4
RGB RAPIDFIRE commit be34a5854b4606bd7a160ad3cb43415d623596c7 upstream. The Corsair K70 RGB RAPIDFIRE needs the USB_QUIRK_DELAY_INIT and USB_QUIRK_DELAY_CTRL_MSG to function or it will randomly not respond on boot, just like other Corsair keyboards Signed-off-by: Jonathan Cox <jonathan@jdcox.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200410212427.2886-1-jonathan@jdcox.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29USB: sisusbvga: Change port variable from signed to unsignedChangming Liu2-17/+17
commit 2df7405f79ce1674d73c2786fe1a8727c905d65b upstream. Change a bunch of arguments of wrapper functions which pass signed integer to an unsigned integer which might cause undefined behaviors when sign integer overflow. Signed-off-by: Changming Liu <liu.changm@northeastern.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/BL0PR06MB45482D71EA822D75A0E60A2EE5D50@BL0PR06MB4548.namprd06.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29iio: xilinx-xadc: Make sure not exceed maximum samplerateLars-Peter Clausen1-18/+60
commit 3b7f9dbb827ce8680b98490215e698b6079a9ec5 upstream. The XADC supports a samplerate of up to 1MSPS. Unfortunately the hardware does not have a FIFO, which means it generates an interrupt for each conversion sequence. At one 1MSPS this creates an interrupt storm that causes the system to soft-lock. For this reason the driver limits the maximum samplerate to 150kSPS. Currently this check is only done when setting a new samplerate. But it is also possible that the initial samplerate configured in the FPGA bitstream exceeds the limit. In this case when starting to capture data without first changing the samplerate the system can overload. To prevent this check the currently configured samplerate in the probe function and reduce it to the maximum if necessary. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29iio: xilinx-xadc: Fix sequencer configuration for aux channels in ↵Lars-Peter Clausen1-0/+10
simultaneous mode commit 8bef455c8b1694547ee59e8b1939205ed9d901a6 upstream. The XADC has two internal ADCs. Depending on the mode it is operating in either one or both of them are used. The device manual calls this continuous (one ADC) and simultaneous (both ADCs) mode. The meaning of the sequencing register for the aux channels changes depending on the mode. In continuous mode each bit corresponds to one of the 16 aux channels. And the single ADC will convert them one by one in order. In simultaneous mode the aux channels are split into two groups the first 8 channels are assigned to the first ADC and the other 8 channels to the second ADC. The upper 8 bits of the sequencing register are unused and the lower 8 bits control both ADCs. This means a bit needs to be set if either the corresponding channel from the first group or the second group (or both) are set. Currently the driver does not have the special handling required for simultaneous mode. Add it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29iio: xilinx-xadc: Fix clearing interrupt when enabling triggerLars-Peter Clausen1-1/+1
commit f954b098fbac4d183219ce5b42d76d6df2aed50a upstream. When enabling the trigger and unmasking the end-of-sequence (EOS) interrupt the EOS interrupt should be cleared from the status register. Otherwise it is possible that it was still set from a previous capture. If that is the case the interrupt would fire immediately even though no conversion has been done yet and stale data is being read from the device. The old code only clears the interrupt if the interrupt was previously unmasked. Which does not make much sense since the interrupt is always masked at this point and in addition masking the interrupt does not clear the interrupt from the status register. So the clearing needs to be done unconditionally. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29iio: xilinx-xadc: Fix ADC-B powerdownLars-Peter Clausen1-2/+3
commit e44ec7794d88f918805d700240211a9ec05ed89d upstream. The check for shutting down the second ADC is inverted. This causes it to be powered down when it should be enabled. As a result channels that are supposed to be handled by the second ADC return invalid conversion results. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29iio: adc: ti-ads8344: properly byte swap valueAlexandre Belloni1-3/+3
commit dd7de4c0023e7564cabe39d64b2822a522890792 upstream. The first received byte is the MSB, followed by the LSB so the value needs to be byte swapped. Also, the ADC actually has a delay of one clock on the SPI bus. Read three bytes to get the last bit. Fixes: 8dd2d7c0fed7 ("iio: adc: Add driver for the TI ADS8344 A/DC chips") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29iio: adc: stm32-adc: fix sleep in atomic contextOlivier Moysan1-3/+28
commit e2042d2936dfc84e9c600fe9b9d0039ca0e54b7d upstream. This commit fixes the following error: "BUG: sleeping function called from invalid context at kernel/irq/chip.c" In DMA mode suppress the trigger irq handler, and make the buffer transfers directly in DMA callback, instead. Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support") Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29iio: st_sensors: rely on odr mask to know if odr can be setLary Gibaud1-1/+1
commit e450e07c14abae563ad13b064cbce9fdccc6bc8d upstream. Indeed, relying on addr being not 0 cannot work because some device have their register to set odr at address 0. As a matter of fact, if the odr can be set, then there is a mask. Sensors with ODR register at address 0 are: lsm303dlh, lsm303dlhc, lsm303dlm Fixes: 7d245172675a ("iio: common: st_sensors: check odr address value in st_sensors_set_odr()") Signed-off-by: Lary Gibaud <yarl-baudig@mailoo.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29iio: core: remove extra semi-colon from devm_iio_device_register() macroLars Engebretsen1-1/+1
commit a07479147be03d2450376ebaff9ea1a0682f25d6 upstream. This change removes the semi-colon from the devm_iio_device_register() macro which seems to have been added by accident. Fixes: 63b19547cc3d9 ("iio: Use macro magic to avoid manual assign of driver_module") Signed-off-by: Lars Engebretsen <lars@engebretsen.ch> Cc: <Stable@vger.kernel.org> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29ALSA: usb-audio: Add connector notifier delegationTakashi Iwai3-0/+48
[ Upstream commit fef66ae73a611e84c8b4b74ff6f805ec5f113477 ] It turned out that ALC1220-VB USB-audio device gives the interrupt event to some PCM terminals while those don't allow the connector state request but only the actual I/O terminals return the request. The recent commit 7dc3c5a0172e ("ALSA: usb-audio: Don't create jack controls for PCM terminals") excluded those phantom terminals, so those events are ignored, too. My first thought was that this could be easily deduced from the associated terminals, but some of them have even no associate terminal ID, hence it's not too trivial to figure out. Since the number of such terminals are small and limited, this patch implements another quirk table for the simple mapping of the connectors. It's not really scalable, but let's hope that there will be not many such funky devices in future. Fixes: 7dc3c5a0172e ("ALSA: usb-audio: Don't create jack controls for PCM terminals") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Link: https://lore.kernel.org/r/20200422113320.26664-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-29ALSA: usb-audio: Add static mapping table for ALC1220-VB-based mobosTakashi Iwai3-6/+44
[ Upstream commit a43c1c41bc5145971d06edc42a6b1e8faa0e2bc3 ] TRX40 mobos from MSI and others with ALC1220-VB USB-audio device need yet more quirks for the proper control names. This patch provides the mapping table for those boards, correcting the FU names for volume and mute controls as well as the terminal names for jack controls. It also improves build_connector_control() not to add the directional suffix blindly if the string is given from the mapping table. With this patch applied, the new UCM profiles will be effective. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Link: https://lore.kernel.org/r/20200420062036.28567-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-29ALSA: hda: Remove ASUS ROG Zenith from the blacklistTakashi Iwai1-1/+0
[ Upstream commit a8cf44f085ac12c0b5b8750ebb3b436c7f455419 ] The commit 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist") added a new blacklist for the devices that are known to have empty codecs, and one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f). However, it turned out that the very same PCI SSID is used for the previous model that does have the valid HD-audio codecs and the change broke the sound on it. This patch reverts the corresponding entry as a temporary solution. Although Zenith II and co will see get the empty HD-audio bus again, it'd be merely resource wastes and won't affect the functionality, so it's no end of the world. We'll need to address this later, e.g. by either switching to DMI string matching or using PCI ID & SSID pairs. Fixes: 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist") Reported-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200419071926.22683-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-29KEYS: Avoid false positive ENOMEM error on key readWaiman Long2-15/+55
[ Upstream commit 4f0882491a148059a52480e753b7f07fc550e188 ] By allocating a kernel buffer with a user-supplied buffer length, it is possible that a false positive ENOMEM error may be returned because the user-supplied length is just too large even if the system do have enough memory to hold the actual key data. Moreover, if the buffer length is larger than the maximum amount of memory that can be returned by kmalloc() (2^(MAX_ORDER-1) number of pages), a warning message will also be printed. To reduce this possibility, we set a threshold (PAGE_SIZE) over which we do check the actual key length first before allocating a buffer of the right size to hold it. The threshold is arbitrary, it is just used to trigger a buffer length check. It does not limit the actual key length as long as there is enough memory to satisfy the memory request. To further avoid large buffer allocation failure due to page fragmentation, kvmalloc() is used to allocate the buffer so that vmapped pages can be used when there is not a large enough contiguous set of pages available for allocation. In the extremely unlikely scenario that the key keeps on being changed and made longer (still <= buflen) in between 2 __keyctl_read_key() calls, the __keyctl_read_key() calling loop in keyctl_read_key() may have to be iterated a large number of times, but definitely not infinite. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-29vrf: Check skb for XFRM_TRANSFORMED flagDavid Ahern1-2/+4
[ Upstream commit 16b9db1ce34ff00d6c18e82825125cfef0cdfb13 ] To avoid a loop with qdiscs and xfrms, check if the skb has already gone through the qdisc attached to the VRF device and then to the xfrm layer. If so, no need for a second redirect. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Reported-by: Trev Larock <trev@larock.ca> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29xfrm: Always set XFRM_TRANSFORMED in xfrm{4,6}_output_finishDavid Ahern2-4/+0
[ Upstream commit 0c922a4850eba2e668f73a3f1153196e09abb251 ] IPSKB_XFRM_TRANSFORMED and IP6SKB_XFRM_TRANSFORMED are skb flags set by xfrm code to tell other skb handlers that the packet has been passed through the xfrm output functions. Simplify the code and just always set them rather than conditionally based on netfilter enabled thus making the flag available for other users. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29geneve: use the correct nlattr array in NL_SET_ERR_MSG_ATTRSabrina Dubroca1-1/+1
[ Upstream commit 9a7b5b50de8a764671ba1800fe4c52d3b7013901 ] IFLA_GENEVE_* attributes are in the data array, which is correctly used when fetching the value, but not when setting the extended ack. Because IFLA_GENEVE_MAX < IFLA_MAX, we avoid out of bounds array accesses, but we don't provide a pointer to the invalid attribute to userspace. Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 04:10:48 +0300