| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit d8ef4b38cb69d907f9b0e889c44d05fc0f890977 ]
This reverts commit 9a9e97b2f1f2 ("cgroup: Add memory barriers to plug
cgroup_rstat_updated() race window").
The commit was added in anticipation of memcg rstat conversion which needed
synchronous accounting for the event counters (e.g. oom kill count). However,
the conversion didn't get merged due to percpu memory overhead concern which
couldn't be addressed at the time.
Unfortunately, the patch's addition of smp_mb() to cgroup_rstat_updated()
meant that every scheduling event now had to go through an additional full
barrier and Mel Gorman noticed it as 1% regression in netperf UDP_STREAM test.
There's no need to have this barrier in tree now and even if we need
synchronous accounting in the future, the right thing to do is separating that
out to a separate function so that hot paths which don't care about
synchronous behavior don't have to pay the overhead of the full barrier. Let's
revert.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Link: http://lkml.kernel.org/r/20200409154413.GK3818@techsingularity.net
Cc: v4.18+
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
The hub FSI master can access the cfams on two other processors. Reflect
this by adding a second cfam to the first hub description.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This is the 5.4.44 stable release
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Set the bus id for each mux channel to avoid switching channels
multiple times.
Set smbus_en of IO expander to 1 in order to be able to read tmp401
sensor.
Add 8 tmp401 thermal sensors.
OpenBMC-Staging-Count: 1
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
On AST2500 update the pcie-device property. On AST2600 update the
pcie-device property and the reset-names.
The reserved memory should be compatible with the shared DMA pool for
use with the XDMA engine. Update the three systems that enable this
dirver: Witherspoon, Tacoma and Rainier.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Update to the latest on the upstream lists.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Switch the documentation to schema and update to the latest on the
upstream lists.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Ports should be defined in the devicetree if they are to be enabled on
the system.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The port number field in the status register was not correct, so fix it.
OpenBMC-Staging-Count: 1
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
|
|
commit 0ada120c883d4f1f6aafd01cf0fbb10d8bbba015 upstream.
libbfd has changed the bfd_section_* macros to inline functions
bfd_section_<field> since 2019-09-18. See below two commits:
o http://www.sourceware.org/ml/gdb-cvs/2019-09/msg00064.html
o https://www.sourceware.org/ml/gdb-cvs/2019-09/msg00072.html
This fix make perf able to build with both old and new libbfd.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200128152938.31413-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4946ea5c1237036155c3b3a24f049fd5f849f8f6 upstream.
>> include/linux/netfilter/nf_conntrack_pptp.h:13:20: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers]
extern const char *const pptp_msg_name(u_int16_t msg);
^~~~~~
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 4c559f15efcc ("netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46c1e0621a72e0469ec4edfdb6ed4d387ec34f8a upstream.
Clang warns:
net/netfilter/nf_conntrack_core.c:2068:21: warning: variable 'ctinfo' is
uninitialized when used here [-Wuninitialized]
nf_ct_set(skb, ct, ctinfo);
^~~~~~
net/netfilter/nf_conntrack_core.c:2024:2: note: variable 'ctinfo' is
declared here
enum ip_conntrack_info ctinfo;
^
1 warning generated.
nf_conntrack_update was split up into nf_conntrack_update and
__nf_conntrack_update, where the assignment of ctinfo is in
nf_conntrack_update but it is used in __nf_conntrack_update.
Pass the value of ctinfo from nf_conntrack_update to
__nf_conntrack_update so that uninitialized memory is not used
and everything works properly.
Fixes: ee04805ff54a ("netfilter: conntrack: make conntrack userspace helpers work again")
Link: https://github.com/ClangBuiltLinux/linux/issues/1039
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 94945ad2b330207cded0fd8d4abebde43a776dfb upstream.
net/netfilter/nf_conntrack_core.c: In function nf_confirm_cthelper:
net/netfilter/nf_conntrack_core.c:2117:15: warning: comparison of unsigned expression in < 0 is always false [-Wtype-limits]
2117 | if (protoff < 0 || (frag_off & htons(~0x7)) != 0)
| ^
ipv6_skip_exthdr() returns a signed integer.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 703acd70f249 ("netfilter: nfnetlink_cthelper: unbreak userspace helper support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a068aab42258e25094bc2c159948d263ed7d7a77 upstream.
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348b8" fixed a similar problem.
Fixes: 07699f9a7c8d ("bonding: add sysfs /slave dir for bond slave devices.")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b86cb8299765688c5119fd18d5f436716c81010 upstream.
Be there a platform with the following layout:
Regular NIC
|
+----> DSA master for switch port
|
+----> DSA master for another switch port
After changing DSA back to static lockdep class keys in commit
1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), this
kernel splat can be seen:
[ 13.361198] ============================================
[ 13.366524] WARNING: possible recursive locking detected
[ 13.371851] 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988 Not tainted
[ 13.377874] --------------------------------------------
[ 13.383201] swapper/0/0 is trying to acquire lock:
[ 13.388004] ffff0000668ff298 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0
[ 13.397879]
[ 13.397879] but task is already holding lock:
[ 13.403727] ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0
[ 13.413593]
[ 13.413593] other info that might help us debug this:
[ 13.420140] Possible unsafe locking scenario:
[ 13.420140]
[ 13.426075] CPU0
[ 13.428523] ----
[ 13.430969] lock(&dsa_slave_netdev_xmit_lock_key);
[ 13.435946] lock(&dsa_slave_netdev_xmit_lock_key);
[ 13.440924]
[ 13.440924] *** DEADLOCK ***
[ 13.440924]
[ 13.446860] May be due to missing lock nesting notation
[ 13.446860]
[ 13.453668] 6 locks held by swapper/0/0:
[ 13.457598] #0: ffff800010003de0 ((&idev->mc_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x400
[ 13.466593] #1: ffffd4d3fb478700 (rcu_read_lock){....}-{1:2}, at: mld_sendpack+0x0/0x560
[ 13.474803] #2: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x64/0xb10
[ 13.483886] #3: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0
[ 13.492793] #4: ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0
[ 13.503094] #5: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0
[ 13.512000]
[ 13.512000] stack backtrace:
[ 13.516369] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988
[ 13.530421] Call trace:
[ 13.532871] dump_backtrace+0x0/0x1d8
[ 13.536539] show_stack+0x24/0x30
[ 13.539862] dump_stack+0xe8/0x150
[ 13.543271] __lock_acquire+0x1030/0x1678
[ 13.547290] lock_acquire+0xf8/0x458
[ 13.550873] _raw_spin_lock+0x44/0x58
[ 13.554543] __dev_queue_xmit+0x84c/0xbe0
[ 13.558562] dev_queue_xmit+0x24/0x30
[ 13.562232] dsa_slave_xmit+0xe0/0x128
[ 13.565988] dev_hard_start_xmit+0xf4/0x448
[ 13.570182] __dev_queue_xmit+0x808/0xbe0
[ 13.574200] dev_queue_xmit+0x24/0x30
[ 13.577869] neigh_resolve_output+0x15c/0x220
[ 13.582237] ip6_finish_output2+0x244/0xb10
[ 13.586430] __ip6_finish_output+0x1dc/0x298
[ 13.590709] ip6_output+0x84/0x358
[ 13.594116] mld_sendpack+0x2bc/0x560
[ 13.597786] mld_ifc_timer_expire+0x210/0x390
[ 13.602153] call_timer_fn+0xcc/0x400
[ 13.605822] run_timer_softirq+0x588/0x6e0
[ 13.609927] __do_softirq+0x118/0x590
[ 13.613597] irq_exit+0x13c/0x148
[ 13.616918] __handle_domain_irq+0x6c/0xc0
[ 13.621023] gic_handle_irq+0x6c/0x160
[ 13.624779] el1_irq+0xbc/0x180
[ 13.627927] cpuidle_enter_state+0xb4/0x4d0
[ 13.632120] cpuidle_enter+0x3c/0x50
[ 13.635703] call_cpuidle+0x44/0x78
[ 13.639199] do_idle+0x228/0x2c8
[ 13.642433] cpu_startup_entry+0x2c/0x48
[ 13.646363] rest_init+0x1ac/0x280
[ 13.649773] arch_call_rest_init+0x14/0x1c
[ 13.653878] start_kernel+0x490/0x4bc
Lockdep keys themselves were added in commit ab92d68fc22f ("net: core:
add generic lockdep keys"), and it's very likely that this splat existed
since then, but I have no real way to check, since this stacked platform
wasn't supported by mainline back then.
>From Taehee's own words:
This patch was considered that all stackable devices have LLTX flag.
But the dsa doesn't have LLTX, so this splat happened.
After this patch, dsa shares the same lockdep class key.
On the nested dsa interface architecture, which you illustrated,
the same lockdep class key will be used in __dev_queue_xmit() because
dsa doesn't have LLTX.
So that lockdep detects deadlock because the same lockdep class key is
used recursively although actually the different locks are used.
There are some ways to fix this problem.
1. using NETIF_F_LLTX flag.
If possible, using the LLTX flag is a very clear way for it.
But I'm so sorry I don't know whether the dsa could have LLTX or not.
2. using dynamic lockdep again.
It means that each interface uses a separate lockdep class key.
So, lockdep will not detect recursive locking.
But this way has a problem that it could consume lockdep class key
too many.
Currently, lockdep can have 8192 lockdep class keys.
- you can see this number with the following command.
cat /proc/lockdep_stats
lock-classes: 1251 [max: 8192]
...
The [max: 8192] means that the maximum number of lockdep class keys.
If too many lockdep class keys are registered, lockdep stops to work.
So, using a dynamic(separated) lockdep class key should be considered
carefully.
In addition, updating lockdep class key routine might have to be existing.
(lockdep_register_key(), lockdep_set_class(), lockdep_unregister_key())
3. Using lockdep subclass.
A lockdep class key could have 8 subclasses.
The different subclass is considered different locks by lockdep
infrastructure.
But "lock-classes" is not counted by subclasses.
So, it could avoid stopping lockdep infrastructure by an overflow of
lockdep class keys.
This approach should also have an updating lockdep class key routine.
(lockdep_set_subclass())
4. Using nonvalidate lockdep class key.
The lockdep infrastructure supports nonvalidate lockdep class key type.
It means this lockdep is not validated by lockdep infrastructure.
So, the splat will not happen but lockdep couldn't detect real deadlock
case because lockdep really doesn't validate it.
I think this should be used for really special cases.
(lockdep_set_novalidate_class())
Further discussion here:
https://patchwork.ozlabs.org/project/netdev/patch/20200503052220.4536-2-xiyou.wangcong@gmail.com/
There appears to be no negative side-effect to declaring lockless TX for
the DSA virtual interfaces, which means they handle their own locking.
So that's what we do to make the splat go away.
Patch tested in a wide variety of cases: unicast, multicast, PTP, etc.
Fixes: ab92d68fc22f ("net: core: add generic lockdep keys")
Suggested-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1fd1c768f3624a5e66766e7b4ddb9b607cd834a5 upstream.
Similar to the last path, need to fix fib_info_nh_uses_dev for
external nexthops to avoid referencing multiple nh_grp structs.
Move the device check in fib_info_nh_uses_dev to a helper and
create a nexthop version that is called if the fib_info uses an
external nexthop.
Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b5e2e39739e861fa5fc84ab27a35dbe62a15330 upstream.
I got too fancy consolidating checks on multipath type. The result
is that path lookups can access 2 different nh_grp structs as exposed
by Nik's torture tests. Expand nexthop_is_multipath within nexthop.h to
avoid multiple, nh_grp dereferences and make decisions based on the
consistent struct.
Only 2 places left using nexthop_is_multipath are within IPv6, both
only check that the nexthop is a multipath for a branching decision
which are acceptable.
Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90f33bffa382598a32cc82abfeb20adc92d041b6 upstream.
We must avoid modifying published nexthop groups while they might be
in use, otherwise we might see NULL ptr dereferences. In order to do
that we allocate 2 nexthoup group structures upon nexthop creation
and swap between them when we have to delete an entry. The reason is
that we can't fail nexthop group removal, so we can't handle allocation
failure thus we move the extra allocation on creation where we can
safely fail and return ENOMEM.
Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ac21753a5c2c9a6a2019997481a2ac12bbde48c8 upstream.
Move nh_grp dereference and check for removing nexthop group due to
all members gone into remove_nh_grp_entry.
Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a4976a3ef844c510ae9120290b23e9f3f47d6bce upstream.
TCP tp->lsndtime unit/base is tcp_jiffies32, not tcp_time_stamp()
Fixes: 36bedb3f2e5b ("crypto: chtls - Inline TLS record Tx")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Cc: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 15c973858903009e995b2037683de29dfe968621 upstream.
In function qlcnic_83xx_interrupt_test(), function
qlcnic_83xx_diag_alloc_res() is not handled by function
qlcnic_83xx_diag_free_res() after a call of the function
qlcnic_alloc_mbx_args() failed. Fix this issue by adding
a jump target "fail_mbx_args", and jump to this new target
when qlcnic_alloc_mbx_args() failed.
Fixes: b6b4316c8b2f ("qlcnic: Handle qlcnic_alloc_mbx_args() failure")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b16a87d0aef7a6be766f6618976dc5ff2c689291 upstream.
The npgs member of struct xdp_umem is an u32 entity, and stores the
number of pages the UMEM consumes. The calculation of npgs
npgs = size / PAGE_SIZE
can overflow.
To avoid overflow scenarios, the division is now first stored in a
u64, and the result is verified to fit into 32b.
An alternative would be storing the npgs as a u64, however, this
wastes memory and is an unrealisticly large packet area.
Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt")
Reported-by: "Minh Bùi Quang" <minhquangbui99@gmail.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/CACtPs=GGvV-_Yj6rbpzTVnopgi5nhMoCcTkSkYrJHGQHJWFZMQ@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20200525080400.13195-1-bjorn.topel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d031781bdabe1027858a3220f868866586bf6e7c upstream.
Fixes bitmask for HE opration's default PE duration.
Fixes: daa5b83513a7 ("mac80211: update HE operation fields to D3.0")
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Link: https://lore.kernel.org/r/20200506102430.5153-1-pradeepc@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b8056e8434b037fdab08158fea99ed7bc8ef3a74 upstream.
We have logic to maintain network counters across resets by storing
the counters in bp->net_stats_prev before reset. But not all resets
will clear the counters. Certain resets that don't need to change
the number of rings do not clear the counters. The current logic
accumulates the counters before all resets, causing big jumps in
the counters after some resets, such as ethtool -G.
Fix it by only accumulating the counters during reset if the irq_re_init
parameter is set. The parameter signifies that all rings and interrupts
will be reset and that means that the counters will also be reset.
Reported-by: Vijayendra Suman <vijayendra.suman@oracle.com>
Fixes: b8875ca356f1 ("bnxt_en: Save ring statistics before reset.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c96ec56828922e3fe5477f75eb3fc02f98f98b5 upstream.
For transport mode, when ipv6 nexthdr is set, the packet format might
be like:
----------------------------------------------------
| | dest | | | | ESP | ESP |
| IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV |
----------------------------------------------------
What it wants to get for x-proto in esp6_gso_encap() is the proto that
will be set in ESP nexthdr. So it should skip all ipv6 nexthdrs and
get the real transport protocol. Othersize, the wrong proto number
will be set into ESP nexthdr.
This patch is to skip all ipv6 nexthdrs by calling ipv6_skip_exthdr()
in esp6_gso_encap().
Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c559f15efcc43b996f4da528cd7f9483aaca36d upstream.
Dan Carpenter says: "Smatch complains that the value for "cmd" comes
from the network and can't be trusted."
Add pptp_msg_name() helper function that checks for the array boundary.
Fixes: f09943fefe6b ("[NETFILTER]: nf_conntrack/nf_nat: add PPTP helper port")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 703acd70f2496537457186211c2f03e792409e68 upstream.
Restore helper data size initialization and fix memcopy of the helper
data size.
Fixes: 157ffffeb5dc ("netfilter: nfnetlink_cthelper: reject too large userspace allocation requests")
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee04805ff54a63ffd90bc6749ebfe73473734ddb upstream.
Florian Westphal says:
"Problem is that after the helper hook was merged back into the confirm
one, the queueing itself occurs from the confirm hook, i.e. we queue
from the last netfilter callback in the hook-list.
Therefore, on return, the packet bypasses the confirm action and the
connection is never committed to the main conntrack table.
To fix this there are several ways:
1. revert the 'Fixes' commit and have a extra helper hook again.
Works, but has the drawback of adding another indirect call for
everyone.
2. Special case this: split the hooks only when userspace helper
gets added, so queueing occurs at a lower priority again,
and normal enqueue reinject would eventually call the last hook.
3. Extend the existing nf_queue ct update hook to allow a forced
confirmation (plus run the seqadj code).
This goes for 3)."
Fixes: 827318feb69cb ("netfilter: conntrack: remove helper hook again")
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a164b95ad6055c50612795882f35e0efda1f1390 upstream.
If IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE is set, user requested to not
update counters in sub sets. Therefore IPSET_FLAG_SKIP_COUNTER_UPDATE
must be set, not unset.
Fixes: 6e01781d1c80e ("netfilter: ipset: set match: add support to match the counters")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e9c284ec4b41c827f4369973d2792992849e4fa5 upstream.
Currently, using the bridge reject target with tagged packets
results in untagged packets being sent back.
Fix this by mirroring the vlan id as well.
Fixes: 85f5b3086a04 ("netfilter: bridge: add reject support")
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 976eba8ab596bab94b9714cd46d38d5c6a2c660d upstream.
In Commit dd9ee3444014 ("vti4: Fix a ipip packet processing bug in
'IPCOMP' virtual tunnel"), it tries to receive IPIP packets in vti
by calling xfrm_input(). This case happens when a small packet or
frag sent by peer is too small to get compressed.
However, xfrm_input() will still get to the IPCOMP path where skb
sec_path is set, but never dropped while it should have been done
in vti_ipcomp4_protocol.cb_handler(vti_rcv_cb), as it's not an
ipcomp4 packet. This will cause that the packet can never pass
xfrm4_policy_check() in the upper protocol rcv functions.
So this patch is to call ip_tunnel_rcv() to process IPIP packets
instead.
Fixes: dd9ee3444014 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 29e4276667e24ee6b91d9f91064d8fda9a210ea1 upstream.
s/xfrm_state_offload/xfrm_user_offload/
Fixes: d77e38e612a ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Antony Antony <antony@phenome.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f6a23d85d078c2ffde79c66ca81d0a1dde451649 upstream.
This patch is to fix a crash:
[ ] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ ] general protection fault: 0000 [#1] SMP KASAN PTI
[ ] RIP: 0010:ipv6_local_error+0xac/0x7a0
[ ] Call Trace:
[ ] xfrm6_local_error+0x1eb/0x300
[ ] xfrm_local_error+0x95/0x130
[ ] __xfrm6_output+0x65f/0xb50
[ ] xfrm6_output+0x106/0x46f
[ ] udp_tunnel6_xmit_skb+0x618/0xbf0 [ip6_udp_tunnel]
[ ] vxlan_xmit_one+0xbc6/0x2c60 [vxlan]
[ ] vxlan_xmit+0x6a0/0x4276 [vxlan]
[ ] dev_hard_start_xmit+0x165/0x820
[ ] __dev_queue_xmit+0x1ff0/0x2b90
[ ] ip_finish_output2+0xd3e/0x1480
[ ] ip_do_fragment+0x182d/0x2210
[ ] ip_output+0x1d0/0x510
[ ] ip_send_skb+0x37/0xa0
[ ] raw_sendmsg+0x1b4c/0x2b80
[ ] sock_sendmsg+0xc0/0x110
This occurred when sending a v4 skb over vxlan6 over ipsec, in which case
skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in
xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries
to get ipv6 info from a ipv4 sk.
This issue was actually fixed by Commit 628e341f319f ("xfrm: make local
error reporting more robust"), but brought back by Commit 844d48746e4b
("xfrm: choose protocol family by skb protocol").
So to fix it, we should call xfrm6_local_error() only when skb->protocol
is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6.
Fixes: 844d48746e4b ("xfrm: choose protocol family by skb protocol")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed17b8d377eaf6b4a01d46942b4c647378a79bdd upstream.
This waring can be triggered simply by:
# ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
priority 1 mark 0 mask 0x10 #[1]
# ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
priority 2 mark 0 mask 0x1 #[2]
# ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \
priority 2 mark 0 mask 0x10 #[3]
Then dmesg shows:
[ ] WARNING: CPU: 1 PID: 7265 at net/xfrm/xfrm_policy.c:1548
[ ] RIP: 0010:xfrm_policy_insert_list+0x2f2/0x1030
[ ] Call Trace:
[ ] xfrm_policy_inexact_insert+0x85/0xe50
[ ] xfrm_policy_insert+0x4ba/0x680
[ ] xfrm_add_policy+0x246/0x4d0
[ ] xfrm_user_rcv_msg+0x331/0x5c0
[ ] netlink_rcv_skb+0x121/0x350
[ ] xfrm_netlink_rcv+0x66/0x80
[ ] netlink_unicast+0x439/0x630
[ ] netlink_sendmsg+0x714/0xbf0
[ ] sock_sendmsg+0xe2/0x110
The issue was introduced by Commit 7cb8a93968e3 ("xfrm: Allow inserting
policies with matching mark and different priorities"). After that, the
policies [1] and [2] would be able to be added with different priorities.
However, policy [3] will actually match both [1] and [2]. Policy [1]
was matched due to the 1st 'return true' in xfrm_policy_mark_match(),
and policy [2] was matched due to the 2nd 'return true' in there. It
caused WARN_ON() in xfrm_policy_insert_list().
This patch is to fix it by only (the same value and priority) as the
same policy in xfrm_policy_mark_match().
Thanks to Yuehaibing, we could make this fix better.
v1->v2:
- check policy->mark.v == pol->mark.v only without mask.
Fixes: 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c95c5f58b35ef995f66cb55547eee6093ab5fcb8 upstream.
Here is the steps to reproduce the problem:
ip netns add foo
ip netns add bar
ip -n foo link add xfrmi0 type xfrm dev lo if_id 42
ip -n foo link set xfrmi0 netns bar
ip netns del foo
ip netns del bar
Which results to:
[ 186.686395] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bd3: 0000 [#1] SMP PTI
[ 186.687665] CPU: 7 PID: 232 Comm: kworker/u16:2 Not tainted 5.6.0+ #1
[ 186.688430] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[ 186.689420] Workqueue: netns cleanup_net
[ 186.689903] RIP: 0010:xfrmi_dev_uninit+0x1b/0x4b [xfrm_interface]
[ 186.690657] Code: 44 f6 ff ff 31 c0 5b 5d 41 5c 41 5d 41 5e c3 48 8d 8f c0 08 00 00 8b 05 ce 14 00 00 48 8b 97 d0 08 00 00 48 8b 92 c0 0e 00 00 <48> 8b 14 c2 48 8b 02 48 85 c0 74 19 48 39 c1 75 0c 48 8b 87 c0 08
[ 186.692838] RSP: 0018:ffffc900003b7d68 EFLAGS: 00010286
[ 186.693435] RAX: 000000000000000d RBX: ffff8881b0f31000 RCX: ffff8881b0f318c0
[ 186.694334] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000246 RDI: ffff8881b0f31000
[ 186.695190] RBP: ffffc900003b7df0 R08: ffff888236c07740 R09: 0000000000000040
[ 186.696024] R10: ffffffff81fce1b8 R11: 0000000000000002 R12: ffffc900003b7d80
[ 186.696859] R13: ffff8881edcc6a40 R14: ffff8881a1b6e780 R15: ffffffff81ed47c8
[ 186.697738] FS: 0000000000000000(0000) GS:ffff888237dc0000(0000) knlGS:0000000000000000
[ 186.698705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 186.699408] CR2: 00007f2129e93148 CR3: 0000000001e0a000 CR4: 00000000000006e0
[ 186.700221] Call Trace:
[ 186.700508] rollback_registered_many+0x32b/0x3fd
[ 186.701058] ? __rtnl_unlock+0x20/0x3d
[ 186.701494] ? arch_local_irq_save+0x11/0x17
[ 186.702012] unregister_netdevice_many+0x12/0x55
[ 186.702594] default_device_exit_batch+0x12b/0x150
[ 186.703160] ? prepare_to_wait_exclusive+0x60/0x60
[ 186.703719] cleanup_net+0x17d/0x234
[ 186.704138] process_one_work+0x196/0x2e8
[ 186.704652] worker_thread+0x1a4/0x249
[ 186.705087] ? cancel_delayed_work+0x92/0x92
[ 186.705620] kthread+0x105/0x10f
[ 186.706000] ? __kthread_bind_mask+0x57/0x57
[ 186.706501] ret_from_fork+0x35/0x40
[ 186.706978] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace fscache sunrpc button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic 8139too ide_cd_mod cdrom ide_gd_mod ata_generic ata_piix libata scsi_mod piix psmouse i2c_piix4 ide_core 8139cp i2c_core mii floppy
[ 186.710423] ---[ end trace 463bba18105537e5 ]---
The problem is that x-netns xfrm interface are not removed when the link
netns is removed. This causes later this oops when thoses interfaces are
removed.
Let's add a handler to remove all interfaces related to a netns when this
netns is removed.
Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Reported-by: Christophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a204aef9fd77dce1efd9066ca4e44eede99cd858 upstream.
An use-after-free crash can be triggered when sending big packets over
vxlan over esp with esp offload enabled:
[] BUG: KASAN: use-after-free in ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0
[] Call Trace:
[] dump_stack+0x75/0xa0
[] kasan_report+0x37/0x50
[] ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0
[] ipv6_gso_segment+0x2c8/0x13c0
[] skb_mac_gso_segment+0x1cb/0x420
[] skb_udp_tunnel_segment+0x6b5/0x1c90
[] inet_gso_segment+0x440/0x1380
[] skb_mac_gso_segment+0x1cb/0x420
[] esp4_gso_segment+0xae8/0x1709 [esp4_offload]
[] inet_gso_segment+0x440/0x1380
[] skb_mac_gso_segment+0x1cb/0x420
[] __skb_gso_segment+0x2d7/0x5f0
[] validate_xmit_skb+0x527/0xb10
[] __dev_queue_xmit+0x10f8/0x2320 <---
[] ip_finish_output2+0xa2e/0x1b50
[] ip_output+0x1a8/0x2f0
[] xfrm_output_resume+0x110e/0x15f0
[] __xfrm4_output+0xe1/0x1b0
[] xfrm4_output+0xa0/0x200
[] iptunnel_xmit+0x5a7/0x920
[] vxlan_xmit_one+0x1658/0x37a0 [vxlan]
[] vxlan_xmit+0x5e4/0x3ec8 [vxlan]
[] dev_hard_start_xmit+0x125/0x540
[] __dev_queue_xmit+0x17bd/0x2320 <---
[] ip6_finish_output2+0xb20/0x1b80
[] ip6_output+0x1b3/0x390
[] ip6_xmit+0xb82/0x17e0
[] inet6_csk_xmit+0x225/0x3d0
[] __tcp_transmit_skb+0x1763/0x3520
[] tcp_write_xmit+0xd64/0x5fe0
[] __tcp_push_pending_frames+0x8c/0x320
[] tcp_sendmsg_locked+0x2245/0x3500
[] tcp_sendmsg+0x27/0x40
As on the tx path of vxlan over esp, skb->inner_network_header would be
set on vxlan_xmit() and xfrm4_tunnel_encap_add(), and the later one can
overwrite the former one. It causes skb_udp_tunnel_segment() to use a
wrong skb->inner_network_header, then the issue occurs.
This patch is to fix it by calling xfrm_output_gso() instead when the
inner_protocol is set, in which gso_segment of inner_protocol will be
done first.
While at it, also improve some code around.
Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db87668ad1e4917cfe04e217307ba6ed9390716e upstream.
This xfrm_state_put call in esp4/6_gro_receive() will cause
double put for state, as in out_reset path secpath_reset()
will put all states set in skb sec_path.
So fix it by simply remove the xfrm_state_put call.
Fixes: 6ed69184ed9c ("xfrm: Reset secpath in xfrm failure")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 06a0afcfe2f551ff755849ea2549b0d8409fd9a0 upstream.
For transport mode, when ipv6 nexthdr is set, the packet format might
be like:
----------------------------------------------------
| | dest | | | | ESP | ESP |
| IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV |
----------------------------------------------------
and in __xfrm_transport_prep():
pskb_pull(skb, skb->mac_len + sizeof(ip6hdr) + x->props.header_len);
it will pull the data pointer to the wrong position, as it missed the
nexthdrs/dest opts.
This patch is to fix it by using:
pskb_pull(skb, skb_transport_offset(skb) + x->props.header_len);
as we can be sure transport_header points to ESP header at that moment.
It also fixes a panic when packets with ipv6 nexthdr are sent over
esp6 transport mode:
[ 100.473845] kernel BUG at net/core/skbuff.c:4325!
[ 100.478517] RIP: 0010:__skb_to_sgvec+0x252/0x260
[ 100.494355] Call Trace:
[ 100.494829] skb_to_sgvec+0x11/0x40
[ 100.495492] esp6_output_tail+0x12e/0x550 [esp6]
[ 100.496358] esp6_xmit+0x1d5/0x260 [esp6_offload]
[ 100.498029] validate_xmit_xfrm+0x22f/0x2e0
[ 100.499604] __dev_queue_xmit+0x589/0x910
[ 100.502928] ip6_finish_output2+0x2a5/0x5a0
[ 100.503718] ip6_output+0x6c/0x120
[ 100.505198] xfrm_output_resume+0x4bf/0x530
[ 100.508683] xfrm6_output+0x3a/0xc0
[ 100.513446] inet6_csk_xmit+0xa1/0xf0
[ 100.517335] tcp_sendmsg+0x27/0x40
[ 100.517977] sock_sendmsg+0x3e/0x60
[ 100.518648] __sys_sendto+0xee/0x160
Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit afcaf61be9d1dbdee5ec186d1dcc67b6b692180f upstream.
For beet mode, when it's ipv6 inner address with nexthdrs set,
the packet format might be:
----------------------------------------------------
| outer | | dest | | | ESP | ESP |
| IP hdr | ESP | opts.| TCP | Data | Trailer | ICV |
----------------------------------------------------
The nexthdr from ESP could be NEXTHDR_HOP(0), so it should
continue processing the packet when nexthdr returns 0 in
xfrm_input(). Otherwise, when ipv6 nexthdr is set, the
packet will be dropped.
I don't see any error cases that nexthdr may return 0. So
fix it by removing the check for nexthdr == 0.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9e4636545933131de15e1ecd06733538ae939b2f upstream.
copy the corresponding pieces of init_fpstate into the gaps instead.
Cc: stable@kernel.org
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 88743470668ef5eb6b7ba9e0f99888e5999bf172 upstream.
The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is
4 294 967 296 or 0x100000000 which is no problem on 64 bit systems.
The patch does not change the later overall result of 0x100000 for
MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new
calculation yields the same result, but does not require 64 bit
arithmetic.
On 32 bit systems the old calculation suffers from an arithmetic
overflow in that intermediate term in braces: 4UL aka unsigned long int
is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does
not fit in 4 bytes), the in braces result is truncated to zero, the
following right shift does not alter that, so MAX_DMA32_PFN evaluates to
0 on 32 bit systems.
That wrong value is a problem in a comparision against MAX_DMA32_PFN in
the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if
swiotlb should be active. That comparison yields the opposite result,
when compiling on 32 bit systems.
This was not possible before
1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")
when that MAX_DMA32_PFN was first made visible to x86_32 (and which
landed in v3.0).
In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on
x86-32.
However if one has set CONFIG_IOMMU_INTEL, since
c5a5dc4cbbf4 ("iommu/vt-d: Don't switch off swiotlb if bounce page is used")
there's a dependency on CONFIG_SWIOTLB, which was not necessarily
active before. That landed in v5.4, where we noticed it in the fli4l
Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64
bit kernel configs there (I could not find out why, so let's just say
historical reasons).
The effect is at boot time 64 MiB (default size) were allocated for
bounce buffers now, which is a noticeable amount of memory on small
systems like pcengines ALIX 2D3 with 256 MiB memory, which are still
frequently used as home routers.
We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4
(LTS) in fli4l and got that kernel messages for example:
Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018
…
Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem)
…
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB)
The initial analysis and the suggested fix was done by user 'sourcejedi'
at stackoverflow and explicitly marked as GPLv2 for inclusion in the
Linux kernel:
https://unix.stackexchange.com/a/520525/50007
The new calculation, which does not suffer from that overflow, is the
same as for arch/mips now as suggested by Robin Murphy.
The fix was tested by fli4l users on round about two dozen different
systems, including both 32 and 64 bit archs, bare metal and virtualized
machines.
[ bp: Massage commit message. ]
Fixes: 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")
Reported-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://unix.stackexchange.com/q/520065/50007
Link: https://web.nettworks.org/bugs/browse/FFL-2560
Link: https://lkml.kernel.org/r/20200526175749.20742-1-post@lespocky.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e2d4a80f93fcfaf72e2e20daf6a28e39c3b90677 upstream.
On a non-forwarding 802.11s link between two fairly busy
neighboring nodes (iperf with -P 16 at ~850MBit/s TCP;
1733.3 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 4), so with
frequent PREQ retries, usually after around 30-40 seconds the
following crash would occur:
[ 1110.822428] Unable to handle kernel read from unreadable memory at virtual address 00000000
[ 1110.830786] Mem abort info:
[ 1110.833573] Exception class = IABT (current EL), IL = 32 bits
[ 1110.839494] SET = 0, FnV = 0
[ 1110.842546] EA = 0, S1PTW = 0
[ 1110.845678] user pgtable: 4k pages, 48-bit VAs, pgd = ffff800076386000
[ 1110.852204] [0000000000000000] *pgd=00000000f6322003, *pud=00000000f62de003, *pmd=0000000000000000
[ 1110.861167] Internal error: Oops: 86000004 [#1] PREEMPT SMP
[ 1110.866730] Modules linked in: pppoe ppp_async batman_adv ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 usb_storage xhci_plat_hcd xhci_pci xhci_hcd dwc3 usbcore usb_common
[ 1110.932190] Process swapper/3 (pid: 0, stack limit = 0xffff0000090c8000)
[ 1110.938884] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.162 #0
[ 1110.944965] Hardware name: LS1043A RGW Board (DT)
[ 1110.949658] task: ffff8000787a81c0 task.stack: ffff0000090c8000
[ 1110.955568] PC is at 0x0
[ 1110.958097] LR is at call_timer_fn.isra.27+0x24/0x78
[ 1110.963055] pc : [<0000000000000000>] lr : [<ffff0000080ff29c>] pstate: 00400145
[ 1110.970440] sp : ffff00000801be10
[ 1110.973744] x29: ffff00000801be10 x28: ffff000008bf7018
[ 1110.979047] x27: ffff000008bf87c8 x26: ffff000008c160c0
[ 1110.984352] x25: 0000000000000000 x24: 0000000000000000
[ 1110.989657] x23: dead000000000200 x22: 0000000000000000
[ 1110.994959] x21: 0000000000000000 x20: 0000000000000101
[ 1111.000262] x19: ffff8000787a81c0 x18: 0000000000000000
[ 1111.005565] x17: ffff0000089167b0 x16: 0000000000000058
[ 1111.010868] x15: ffff0000089167b0 x14: 0000000000000000
[ 1111.016172] x13: ffff000008916788 x12: 0000000000000040
[ 1111.021475] x11: ffff80007fda9af0 x10: 0000000000000001
[ 1111.026777] x9 : ffff00000801bea0 x8 : 0000000000000004
[ 1111.032080] x7 : 0000000000000000 x6 : ffff80007fda9aa8
[ 1111.037383] x5 : ffff00000801bea0 x4 : 0000000000000010
[ 1111.042685] x3 : ffff00000801be98 x2 : 0000000000000614
[ 1111.047988] x1 : 0000000000000000 x0 : 0000000000000000
[ 1111.053290] Call trace:
[ 1111.055728] Exception stack(0xffff00000801bcd0 to 0xffff00000801be10)
[ 1111.062158] bcc0: 0000000000000000 0000000000000000
[ 1111.069978] bce0: 0000000000000614 ffff00000801be98 0000000000000010 ffff00000801bea0
[ 1111.077798] bd00: ffff80007fda9aa8 0000000000000000 0000000000000004 ffff00000801bea0
[ 1111.085618] bd20: 0000000000000001 ffff80007fda9af0 0000000000000040 ffff000008916788
[ 1111.093437] bd40: 0000000000000000 ffff0000089167b0 0000000000000058 ffff0000089167b0
[ 1111.101256] bd60: 0000000000000000 ffff8000787a81c0 0000000000000101 0000000000000000
[ 1111.109075] bd80: 0000000000000000 dead000000000200 0000000000000000 0000000000000000
[ 1111.116895] bda0: ffff000008c160c0 ffff000008bf87c8 ffff000008bf7018 ffff00000801be10
[ 1111.124715] bdc0: ffff0000080ff29c ffff00000801be10 0000000000000000 0000000000400145
[ 1111.132534] bde0: ffff8000787a81c0 ffff00000801bde8 0000ffffffffffff 000001029eb19be8
[ 1111.140353] be00: ffff00000801be10 0000000000000000
[ 1111.145220] [< (null)>] (null)
[ 1111.149917] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398
[ 1111.155741] [<ffff000008081938>] __do_softirq+0x100/0x1fc
[ 1111.161130] [<ffff0000080a2e28>] irq_exit+0x80/0xd8
[ 1111.166002] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0
[ 1111.171825] [<ffff000008081678>] gic_handle_irq+0x68/0xb0
[ 1111.177213] Exception stack(0xffff0000090cbe30 to 0xffff0000090cbf70)
[ 1111.183642] be20: 0000000000000020 0000000000000000
[ 1111.191461] be40: 0000000000000001 0000000000000000 00008000771af000 0000000000000000
[ 1111.199281] be60: ffff000008c95180 0000000000000000 ffff000008c19360 ffff0000090cbef0
[ 1111.207101] be80: 0000000000000810 0000000000000400 0000000000000098 ffff000000000000
[ 1111.214920] bea0: 0000000000000001 ffff0000089167b0 0000000000000000 ffff0000089167b0
[ 1111.222740] bec0: 0000000000000000 ffff000008c198e8 ffff000008bf7018 ffff000008c19000
[ 1111.230559] bee0: 0000000000000000 0000000000000000 ffff8000787a81c0 ffff000008018000
[ 1111.238380] bf00: ffff00000801c000 ffff00000913ba34 ffff8000787a81c0 ffff0000090cbf70
[ 1111.246199] bf20: ffff0000080857cc ffff0000090cbf70 ffff0000080857d0 0000000000400145
[ 1111.254020] bf40: ffff000008018000 ffff00000801c000 ffffffffffffffff ffff0000080fa574
[ 1111.261838] bf60: ffff0000090cbf70 ffff0000080857d0
[ 1111.266706] [<ffff0000080832e8>] el1_irq+0xe8/0x18c
[ 1111.271576] [<ffff0000080857d0>] arch_cpu_idle+0x10/0x18
[ 1111.276880] [<ffff0000080d7de4>] do_idle+0xec/0x1b8
[ 1111.281748] [<ffff0000080d8020>] cpu_startup_entry+0x20/0x28
[ 1111.287399] [<ffff00000808f81c>] secondary_start_kernel+0x104/0x110
[ 1111.293662] Code: bad PC value
[ 1111.296710] ---[ end trace 555b6ca4363c3edd ]---
[ 1111.301318] Kernel panic - not syncing: Fatal exception in interrupt
[ 1111.307661] SMP: stopping secondary CPUs
[ 1111.311574] Kernel Offset: disabled
[ 1111.315053] CPU features: 0x0002000
[ 1111.318530] Memory Limit: none
[ 1111.321575] Rebooting in 3 seconds..
With some added debug output / delays we were able to push the crash from
the timer callback runner into the callback function and by that shedding
some light on which object holding the timer gets corrupted:
[ 401.720899] Unable to handle kernel read from unreadable memory at virtual address 00000868
[...]
[ 402.335836] [<ffff0000088fafa4>] _raw_spin_lock_bh+0x14/0x48
[ 402.341548] [<ffff000000dbe684>] mesh_path_timer+0x10c/0x248 [mac80211]
[ 402.348154] [<ffff0000080ff29c>] call_timer_fn.isra.27+0x24/0x78
[ 402.354150] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398
[ 402.359974] [<ffff000008081938>] __do_softirq+0x100/0x1fc
[ 402.365362] [<ffff0000080a2e28>] irq_exit+0x80/0xd8
[ 402.370231] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0
[ 402.376053] [<ffff000008081678>] gic_handle_irq+0x68/0xb0
The issue happens due to the following sequence of events:
1) mesh_path_start_discovery():
-> spin_unlock_bh(&mpath->state_lock) before mesh_path_sel_frame_tx()
2) mesh_path_free_rcu()
-> del_timer_sync(&mpath->timer)
[...]
-> kfree_rcu(mpath)
3) mesh_path_start_discovery():
-> mod_timer(&mpath->timer, ...)
[...]
-> rcu_read_unlock()
4) mesh_path_free_rcu()'s kfree_rcu():
-> kfree(mpath)
5) mesh_path_timer() starts after timeout, using freed mpath object
So a use-after-free issue due to a timer re-arming bug caused by an
early spin-unlocking.
This patch fixes this issue by re-checking if mpath is about to be
free'd and if so bails out of re-arming the timer.
Cc: stable@vger.kernel.org
Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol")
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Link: https://lore.kernel.org/r/20200522170413.14973-1-linus.luessing@c0d3.blue
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 700d3a5a664df267f01ec8887fd2d8ff98f67e7f upstream.
Revert
45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long")
and add a comment to discourage someone else from making the same
mistake again.
It turns out that some user code fails to compile if __X32_SYSCALL_BIT
is unsigned long. See, for example [1] below.
[ bp: Massage and do the same thing in the respective tools/ header. ]
Fixes: 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long")
Reported-by: Thorsten Glaser <t.glaser@tarent.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@kernel.org
Link: [1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=954294
Link: https://lkml.kernel.org/r/92e55442b744a5951fdc9cfee10badd0a5f7f828.1588983892.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0bbab5f0301587cad4e923ccc49bb910db86162c upstream.
Removing the "if (IS_ERR(dir)) dir = NULL;" check only works
if we adjust the remaining code to not rely on it being NULL.
Check IS_ERR_OR_NULL() before attempting to dereference it.
I'm not actually entirely sure this fixes the syzbot crash as
the kernel config indicates that they do have DEBUG_FS in the
kernel, but this is what I found when looking there.
Cc: stable@vger.kernel.org
Fixes: d82574a8e5a4 ("cfg80211: no need to check return value of debugfs_create functions")
Reported-by: syzbot+fd5332e429401bf42d18@syzkaller.appspotmail.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200525113816.fc4da3ec3d4b.Ica63a110679819eaa9fb3bc1b7437d96b1fd187d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bf71bc16e02162388808949b179d59d0b571b965 ]
The Debian kernel v5.6 triggers this kernel panic:
Kernel panic - not syncing: Bad Address (null pointer deref?)
Bad Address (null pointer deref?): Code=26 (Data memory access rights trap) at addr 0000000000000000
CPU: 0 PID: 0 Comm: swapper Not tainted 5.6.0-2-parisc64 #1 Debian 5.6.14-1
IAOQ[0]: mem_init+0xb0/0x150
IAOQ[1]: mem_init+0xb4/0x150
RP(r2): start_kernel+0x6c8/0x1190
Backtrace:
[<0000000040101ab4>] start_kernel+0x6c8/0x1190
[<0000000040108574>] start_parisc+0x158/0x1b8
on a HP-PARISC rp3440 machine with this memory layout:
Memory Ranges:
0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB
1) Start 0x0000004040000000 End 0x00000040ffdfffff Size 3070 MB
Fix the crash by avoiding virt_to_page() and similar functions in
mem_init() until the memory zones have been fully set up.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7cc31613734c4870ae32f5265d576ef296621343 ]
kobject_init_and_add() takes reference even when it fails.
Thus, when kobject_init_and_add() returns an error,
kobject_put() must be called to properly clean up the kobject.
Fixes: d72e31c93746 ("iommu: IOMMU Groups")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200527210020.6522-1-wu000273@umn.edu
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9bdf7e655b9ee81ee912fae1d59df48ce7311b6 ]
We provided the right semantics on open drain lines being
by definition output but incidentally the irq set up function
would only allow IRQs on lines that were "not output".
Fix the semantics to allow output open drain lines to be used
for IRQs.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Russell King <linux@armlinux.org.uk>
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/r/20200527140758.162280-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e ]
This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb.
io_uring does do the right thing for this case, and we're still returning
-EAGAIN to userspace for the cases we don't support. Revert this change
to avoid doing endless spins of resubmits.
Cc: stable@vger.kernel.org # v5.6
Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4377748c7b5187c3342a60fa2ceb60c8a57a8488 ]
drivers/hwmon/amd_energy.c:195:15: error: invalid operands to binary expression ('void' and 'int')
(channel - data->nr_cpus));
~~~~~~~~~^~~~~~~~~~~~~~~~~
include/asm-generic/topology.h:51:42: note: expanded from macro 'cpumask_of_node'
#define cpumask_of_node(node) ((void)node, cpu_online_mask)
^~~~
include/linux/cpumask.h:618:72: note: expanded from macro 'cpumask_first_and'
#define cpumask_first_and(src1p, src2p) cpumask_next_and(-1, (src1p), (src2p))
^~~~~
Fixes: f0b848ce6fe9 ("cpumask: Introduce cpumask_of_{node,pcibus} to replace {node,pcibus}_to_cpumask")
Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20200527134623.930247-1-arnd@arndb.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
