summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-07-07iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iserNicholas Bellinger2-10/+18
This patch adds target_get_sess_cmd reference counting for iscsit_handle_task_mgt_cmd(), and adds a target_put_sess_cmd() for the failure case. It also fixes a bug where ISCSI_OP_SCSI_TMFUNC type commands where leaking iscsi_cmd->i_conn_node and eventually triggering an OOPs during struct isert_conn shutdown. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07iscsi-target: Fix iscsit_sequence_cmd reject handling for iserNicholas Bellinger6-33/+62
This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd() in order to avoid external iscsit_reject_cmd() reject usage for all PDU types. It also updates PDU specific handlers for traditional iscsi-target code to not reset the session after posting a ISCSI_OP_REJECT during setup. (v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call target_put_sess_cmd() after iscsit_sequence_cmd() failure) Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07iscsi-target: Fix iscsit_add_reject* usage for iserNicholas Bellinger8-180/+120
This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd() usage to not sleep on iscsi_cmd->reject_comp to address a free-after-use usage bug in v3.10 with iser-target code. It saves ->reject_reason for use within iscsit_build_reject() so the correct value for both transport cases. It also drops the legacy fail_conn parameter usage throughput iscsi-target code and adds two iscsit_add_reject_cmd() and iscsit_reject_cmd helper functions, along with various small cleanups. (v2: Re-enable target_put_sess_cmd() to be called from iscsit_add_reject_from_cmd() for rejects invoked after target_get_sess_cmd() has been called) Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07iser-target: Fix isert_put_reject payload buffer postNicholas Bellinger1-4/+22
This patch adds the missing isert_put_reject() logic to post a outgoing payload buffer to hold the 48 bytes of original PDU header request payload for the rejected cmd. It also fixes ISTATE_SEND_REJECT handling in isert_response_completion() -> isert_do_control_comp() code, and drops incorrect iscsi_cmd_t->reject_comp usage. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: missing kfree() on error pathDan Carpenter1-0/+1
Fix-up breakage in iscsit_build_sendtargets_response() from v3.11 changes, and free "payload" before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: Drop left-over iscsi_conn->bad_hdrNicholas Bellinger2-7/+0
All REJECT response setup of the rejected payload is now done using on-demand cmd->buf_ptr allocations. Go ahead and remove dead iscsi_conn->bad_hdr usage rx_opcode path Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04target: Make core_scsi3_update_and_write_aptpl return sense_reason_tNicholas Bellinger1-22/+25
Fix up sense_reason_t breakage in core_scsi3_update_and_write_aptpl() from recent conversion to use local scope memory allocation. Reported as sparse warnings: (new ones prefixed by >>) by Fengguang: >> drivers/target/target_core_pr.c:2069:57: sparse: incorrect type in >> return expression (different base types) drivers/target/target_core_pr.c:2069:57: expected restricted sense_reason_t drivers/target/target_core_pr.c:2069:57: got int >> drivers/target/target_core_pr.c:2179:21: sparse: incorrect type in >> assignment (different base types) drivers/target/target_core_pr.c:2179:21: expected restricted sense_reason_t [assigned] [usertype] ret drivers/target/target_core_pr.c:2179:21: got int >> drivers/target/target_core_pr.c:2197:13: sparse: incorrect type in >> assignment (different base types) drivers/target/target_core_pr.c:2197:13: expected restricted sense_reason_t [assigned] [usertype] ret drivers/target/target_core_pr.c:2197:13: got int drivers/target/target_core_pr.c:1245:28: sparse: context imbalance in '__core_scsi3_free_registration' - unexpected unlock Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: Add demo-mode TPG authentication context supportNicholas Bellinger3-1/+139
This patch adds a auth configfs group context following existing explict NodeACL and discovery auth within: /sys/kernel/config/target/iscsi/$TARGETNAME/$TPGT/auth/ This patch allows these attributes to be used for CHAP authentication an TPG is configured in demo-mode (generate_node_acl=1). Note this authentication information takes precedence over NodeACL authentication when struct se_node_acl->dynamic_node_acl is present. Cc: Dax Kelson <dkelson@gurulabs.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04target: Add se_portal_group->tpg_auth_groupNicholas Bellinger4-3/+33
This patch adds an optional /auth/ configfs group to TPG context that can be used by fabrics like iscsi-target for TPG demo-mode authentication. Cc: Dax Kelson <dkelson@gurulabs.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: Add IFC_SENDTARGETS_SINGLE supportNicholas Bellinger2-0/+29
This patch changes ISCSI_OP_TEXT handling of SendTargets=[iqn.,eui.] payloads to return explicit discovery information. It adds checks to iscsit_process_text_cmd() and adds the special single $TARGETNAME discovery case in iscsit_build_sendtargets_response() code. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: Move sendtargets parsing into iscsit_process_text_cmdNicholas Bellinger3-20/+35
This patch moves ISCSI_OP_TEXT PDU buffer sanity checks to iscsit_process_text_cmd() code, so that it can be shared with iser-target code. It adds IFC_SENDTARGETS_ALL + iscsi_cmd->text_in_ptr in order to save text payload for ISCSI_OP_TEXT_RSP, and updates iscsit_release_cmd() to assigned memory. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04iscsi-target: Allow ->MaxXmitDataSegmentLength assignment for iser discoveryNicholas Bellinger1-3/+0
This patch changes iscsi_set_connection_parameters() to allow conn_ops->MaxXmitDataSegmentLength assignement to occur during in-band iser send-targets discovery, as this value is required by TEXT response processing code. Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-26iscsi-target: Refactor ISCSI_OP_TEXT_RSP TX handlingNicholas Bellinger2-35/+44
This patch refactoring existing iscsit_send_text_rsp() in order to handle iscsi_text_rsp payloads in a transport specific manner. This includes the addition of iscsit_build_text_rsp() to build the response payload and initialize ISCSI_OP_TEXT_RSP. v2: Make iscsit_build_text_rsp() determine extra padding bytes, and drop legacy padding calculation for traditional iSCSI text responses within iscsit_send_text_rsp() Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-25iscsi-target: Refactor ISCSI_OP_TEXT RX handlingNicholas Bellinger2-68/+94
This patch refactors ISCSI_OP_TEXT handling within iscsi-target in order to handle iscsi_text payloads in a transport specific manner. This includes splitting current iscsit_handle_text_cmd() into iscsit_setup_text_cmd() and iscsit_process_text_cmd() calls, and makes iscsit_handle_text_cmd be only used internally by traditional iscsi socket calls. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-25iscsi/isert-target: Refactor ISCSI_OP_NOOP RX handlingNicholas Bellinger3-88/+115
This patch refactors ISCSI_OP_NOOP handling within iscsi-target in order to handle iscsi_nopout payloads in a transport specific manner. This includes splitting existing iscsit_handle_nop_out() into iscsit_setup_nop_out() and iscsit_process_nop_out() calls, and makes iscsit_handle_nop_out() be only used internally by traditional iscsi socket calls. Next update iser-target code to use new callers and add FIXME for the handling iscsi_nopout payloads. Also fix reject response handling in iscsit_setup_nop_out() to use proper iscsit_add_reject_from_cmd(). v2: Fix uninitialized iscsit_handle_nop_out() payload_length usage (Fengguang) v3: Remove left-over dead code in iscsit_setup_nop_out() (DanC) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21qla_target: remove qlt_check_fcport_existJörn Engel2-140/+17
Comment from original 2012 patch: In all our testing this function has never returned true. However, the dropping of hardware_lock necessary to call this function seems to cause a use-after-free we manage to hit rather frequently. Given this cost-benefit ratio, I'm willing to remove some 100 lines of code. And since the same problem exists around shutdown_sess and put_sess, this patch changes them from taking the hardware_lock to requiring the hardware_lock to be taken. In most cases the caller already had the lock and had to drop it for the called method to reacquire it. At best that hurts performance and in rare instances it causes races with fatal consequences. We dropped the original 2012 patch when upgrading our kernel and it took us nearly half a year to discover we still need it. (nab: Fix qla_tgt_sess reference in tcm_qla2xxx_put_sess) Signed-off-by: Joern Engel <joern@logfs.org> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21vhost/scsi: Convert to se_cmd->cmd_kref TARGET_SCF_ACK_KREF usageNicholas Bellinger1-12/+19
This patch coverts vhost/scsi to se_cmd->cmd_kref TARGET_SCF_ACK_KREF usage, instead of assuming that vhost_scsi_free_cmd() is always called before TCM processing is completed in the response fast path. This includes adding vhost_scsi_check_stop_free() -> target_put_sess_cmd() to perform the second se_cmd->cmd_kref put, and moving vhost_scsi_free_cmd() resource release into tcm_vhost_release_cmd() that is invoked once the last se_cmd->cmd_kref put occurs. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Asias He <asias@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21vhost/scsi: Drop unnecessary wait_for_tasks=true usage with ↵Nicholas Bellinger1-1/+1
transport_generic_free_cmd This patch changes vhost_scsi_free_cmd() to call transport_generic_free_cmd() with wait_for_tasks=false in order to avoid the extra se_cmd->t_state_lock access for the wait_for_tasks=true case. This is unnecessary because vhost_scsi_free_cmd() is only ever called by vhost_scsi_complete_cmd_work() after TCM completion handoff, and by vhost_scsi_handle_vq() exception code before TCM submission handoff, so there is never a case where se_cmd is still active from TCM's perspective when transport_generic_free_cmd() is called. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Asias He <asias@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21target: Drop legacy se_cmd->check_release bitNicholas Bellinger2-9/+1
Now with iscsi-target using modern se_cmd->cmd_kref accounting in v3.10 code, it's safe to go ahead and drop the legacy release codepath + se_cmd->check_release bit in transport_release_cmd() Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21iscsi-target: Avoid unnecessary t_state_lock during unsolicited data-out checkNicholas Bellinger1-6/+0
In modern iscsi-target code, the setup and I/O submission is done within a single process context, so there is no need to acquire se_cmd->t_state_lock while checking SCF_SUPPORTED_SAM_OPCODE for determining when unsolicited data-out should be dumped. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21target: Drop unnecessary t_state_lock access for SCF_SUPPORTED_SAM_OPCODE ↵Nicholas Bellinger1-3/+0
assignment This patch drops the se_cmd->t_state_lock access around SCF_SUPPORTED_SAM_OPCODE assignment within target_setup_cmd_from_cdb(). Original v4.0 target code required this as fabrics would be checking for this values in different process contexts for setup and I/O submission. Given that modern v4.1 target code performs setup and I/O submission from the same process context, this t_state_lock access is no longer required. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21target: Avoid extra t_state_lock access in __target_execute_cmdNicholas Bellinger1-7/+9
This patch makes target_execute_cmd() set CMD_T_BUSY|CMD_T_SENT while holding se_cmd->t_state_lock, in order to avoid the extra aquire/release in __target_execute_cmd(). It also clears these bits in case of a target_handle_task_attr() failure. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21target: Remove legacy t_fe_count + avoid t_state_lock access in ↵Nicholas Bellinger3-29/+2
transport_put_cmd This patch removes legacy se_cmd->t_fe_count usage in order to avoid se_cmd->t_state_lock access within transport_put_cmd() during normal fast path se_cmd descriptor release. Also drop the left-over parameter usage within core_tmr_handle_tas_abort() Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21target: Drop unnecessary CMD_T_DEV_ACTIVE check from transport_lun_remove_cmdNicholas Bellinger1-7/+0
This patch drops an unnecessary acquire/release of se_cmd->t_state_lock within transport_lun_remove_cmd() when checking CMD_T_DEV_ACTIVE for invoking target_remove_from_state_list(). For all fast path completion cases, transport_lun_remove_cmd() is always called ahead of transport_cmd_check_stop(), and since transport_cmd_check_stop() is calling target_remove_from_state_list() when remove_from_lists=true, the t_state_lock usage in transport_lun_remove_cmd() can safely be removed. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-21target: Add transport_cmd_check_stop write_pending bitNicholas Bellinger1-10/+9
This patch adds a new transport_cmd_check_stop() parameter for signaling when TRANSPORT_WRITE_PENDING needs to be set. This allows transport_generic_new_cmd() to avoid the extra lock acquire/release of ->t_state_lock in the fast path for DMA_TO_DEVICE operations ahead of transport_cmd_check_stop() + se_tfo->write_pending(). Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Don't allocate pages for NULLIO devicesAndy Grover1-0/+5
Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Make virtual_lun0 a nullio deviceAndy Grover1-3/+1
Nobody should be expecting to read or write virtual_lun0. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Further refactoring of core_scsi3_emulate_pro_register()Andy Grover1-26/+20
Use bool params when appropriate. Eliminate unneeded pr_reg_e and type variables. Just one goto label, so rename to 'out' from 'out_put_pr_reg'. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Use if/else for sa_res_key conditional in emulate_pro_register()Andy Grover1-21/+21
Don't need goto, we can just do an if/else for sa_res_key behavior. Move shorter case first. Slightly shorter b/c both cases can share a call to update_and_write_aptpl() now. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Allocate aptpl_buf inside update_and_write_aptpl()Andy Grover2-157/+48
Instead of taking the buffer and length, update_and_write_aptpl() will allocate the buffer as needed, and then free it. Instead, the function takes an 'aptpl' boolean parameter. This enables us to remove memory alloc/frees from struct t10_pr_registration and other spots. There is a slight loss of functionality because each callsite doesn't get its own pr_debug any more, but this info can be cleaned via ftrace if necessary and I think the shorter code is worth it. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Delete incorrect commentAndy Grover1-3/+0
aptpl_file_mutex seems to no longer exist. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Remove unneeded param pr_aptpl_buf_len to write_aptpl_to_file()Andy Grover1-5/+4
As mentioned in the comments in update_and_write_aptpl, write_aptpl_to_file() calls strlen() on the buffer, and the length was always being passed as zero. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Remove t10_reservation.pr_aptpl_buf_lenAndy Grover3-23/+11
It's only ever set to PR_APTPL_BUF_LEN, so we don't need a variable. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Unify __core_scsi3_update_aptpl_buf and core_scsi3_update_aptpl_bufAndy Grover1-22/+10
The __ version is only ever called from the regular version, so just inline it. It's not too much more complex to handle both spinlocks in the same function. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Simplify metadata handling when clearing aptpl metadataAndy Grover1-30/+9
Simpler to just set buf in update_and_write_aptpl(), rather than passing down to ____core_scsi3_update_aptpl_buf(). Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Fix two debugprints that appear to be wrongAndy Grover1-4/+4
They're in emulate_pro_register, so change UNREGISTER to REGISTER. The first one seems wrong -- sa_res_key could be 0 there, but it's testing spec_i_pt. Remove unneeded parens in 2nd conditional. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Alter core_pr_dump_initiator_port for ease of useAndy Grover3-46/+27
We use this function exclusively in debug prints. Instead of returning 0 or 1 if isid is present, just set buf to "" if it isn't there. This saves callers from having to check the return value. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14target: Add register_type and preempt_type enums to clarify codeAndy Grover1-33/+44
core_scsi3_enulate_pro_register took an 'ignore_key' parameter that really distinguished between REGISTER and REGISTER_AND_IGNORE_EXISTING_KEY registration types, which was a little confusing. Same situation for PREEMPT and PREEMPT_AND_ABORT. Use enums to add a little more descriptiveness to the code. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-09Linux 3.10-rc5v3.10-rc5Linus Torvalds1-1/+1
2013-06-09hpfs: fix warnings when the filesystem fills upMikulas Patocka1-0/+4
This patch fixes warnings due to missing lock on write error path. WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]() Hardware name: empty Pid: 26563, comm: dd Tainted: P O 3.9.4 #12 Call Trace: hpfs_truncate+0x75/0x80 [hpfs] hpfs_write_begin+0x84/0x90 [hpfs] _hpfs_bmap+0x10/0x10 [hpfs] generic_file_buffered_write+0x121/0x2c0 __generic_file_aio_write+0x1c7/0x3f0 generic_file_aio_write+0x7c/0x100 do_sync_write+0x98/0xd0 hpfs_file_write+0xd/0x50 [hpfs] vfs_write+0xa2/0x160 sys_write+0x51/0xa0 page_fault+0x22/0x30 system_call_fastpath+0x1a/0x1f Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-09Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds4-2/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: - Trivial: unused variable removal - Posix-timers: Add the clock ID to the new proc interface to make it useful. The interface is new and should be functional when we reach the final 3.10 release. - Cure a false positive warning in the tick code introduced by the overhaul in 3.10 - Fix for a persistent clock detection regression introduced in this cycle * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Correct run-time detection of persistent_clock. ntp: Remove unused variable flags in __hardpps posix-timers: Show clock ID in proc file tick: Cure broadcast false positive pending bit warning
2013-06-09Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds3-4/+9
Pull irqdomain bug fixes from Grant Likely: "This branch contains a set of straight forward bug fixes to the irqdomain code and to a couple of drivers that make use of it." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux: irqchip: Return -EPERM for reserved IRQs irqdomain: document the simple domain first_irq kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid. irqdomain: export irq_domain_add_simple
2013-06-09irqchip: Return -EPERM for reserved IRQsGrant Likely2-2/+2
The irqdomain core will report a log message for any attempted map call that fails unless the error code is -EPERM. This patch changes the Versatile irq controller drivers to use -EPERM because it is normal for a subset of the IRQ inputs to be marked as reserved on the various Versatile platforms. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-09irqdomain: document the simple domain first_irqLinus Walleij1-1/+4
The first_irq needs to be zero to get a linear domain and that comes with special semantics. We want to simplify this going forward but some documentation never hurts. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-09kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.Chen Gang1-1/+2
Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq' which related with 'irq_data' has to initialize later, or it will cause issue. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-09irqdomain: export irq_domain_add_simpleArnd Bergmann1-0/+1
All other irq_domain_add_* functions are exported already, and apparently this one got left out by mistake, which causes build errors for ARM allmodconfig kernels: ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined! ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined! Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08Merge tag 'fixes-for-linus' of ↵Linus Torvalds15-49/+84
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes for arm-soc platforms. Nothing controversial here, a handful of fixes for regressions and/or serious problems across several of the platforms. Things are slowing down nicely on fix rates for 3.10" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: add debug_ll_io_init() call in exynos_init_io() ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins ARM: mxs: icoll: Fix interrupts gpio bank 0 ARM: imx: clk-imx6q: AXI clock select index is incorrect ARM: bcm2835: override the HW UART periphid ARM: mvebu: Fix bug in coherency fabric low level init function ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3 ARM: ux500: Only configure wake-up reasons on ux500 based platforms ARM: dts: imx: fix clocks for cspi ARM i.MX6q: fix for ldb_di_sels
2013-06-08Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds9-39/+82
Pull MIPS fixes from Ralf Baechle: "MIPS fixes across the field. The only area that's standing out is the exception handling which received it's dose of breakage as part of the microMIPS patchset" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: add missing SZ_1M multiplier MIPS: Compat: Fix cputime_to_timeval() arguments in compat binfmt_elf. MIPS: OCTEON: Improve _machine_halt implementation. MIPS: rtlx: Fix implicit declaration of function set_vi_handler() MIPS: Trap exception handling fixes MIPS: Quit exposing Kconfig symbols in uapi headers. MIPS: Remove duplicate definition of check_for_high_segbits.
2013-06-08Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu fix from Greg Ungerer: "A single fix for compilation breakage to many of the ColdFire CPU targets" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: only use local gpio_request_one if not using GPIOLIB
2013-06-08Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds29-68/+188
Pull drm fixes from Dave Airlie: "Regression fixers for the big 3: - nouveau: hdmi audio, dac load detect, s/r regressions fixed - radeon: long standing system hang fixed, hdmi audio and rs780 fast fb fixes - intel: one old regression, a WARN removal, and a stop X dying fix Otherwise one mgag200 fix, a couple of arm build fixes, and a core use after free fix." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nv50/kms: use dac loadval from vbios, where it's available drm/nv50/disp: force dac power state during load detect drm/nv50-nv84/fifo: fix resume regression introduced by playlist race fix drm/nv84/disp: Fix HDMI audio regression drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC. drm/radeon: don't allow audio on DCE6 drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2) radeon: Fix system hang issue when using KMS with older cards drm/i915: no lvds quirk for hp t5740 drm/i915: Quirk the pipe A quirk in the modeset state checker drm/i915: Fix spurious -EIO/SIGBUS on wedged gpus drm/mgag200: Add missing write to index before accessing data register drm/nouveau: use mdelay instead of large udelay constants drm/tilcd: select BACKLIGHT_LCD_SUPPORT drm: fix a use-after-free when GPU acceleration disabled
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-07 18:57:19 +0300