diff options
Diffstat (limited to 'sound/oss/aedsp16.c')
| -rw-r--r-- | sound/oss/aedsp16.c | 1373 |
1 files changed, 0 insertions, 1373 deletions
diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c deleted file mode 100644 index f058ed6bdb69..000000000000 --- a/sound/oss/aedsp16.c +++ /dev/null @@ -1,1373 +0,0 @@ -/* - sound/oss/aedsp16.c - - Audio Excel DSP 16 software configuration routines - Copyright (C) 1995,1996,1997,1998 Riccardo Facchetti (fizban@tin.it) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - */ -/* - * Include the main OSS Lite header file. It include all the os, OSS Lite, etc - * headers needed by this source. - */ -#include <linux/delay.h> -#include <linux/module.h> -#include <linux/init.h> -#include "sound_config.h" - -/* - - READ THIS - - This module started to configure the Audio Excel DSP 16 Sound Card. - Now works with the SC-6000 (old aedsp16) and new SC-6600 based cards. - - NOTE: I have NO idea about Audio Excel DSP 16 III. If someone owns this - audio card and want to see the kernel support for it, please contact me. - - Audio Excel DSP 16 is an SB pro II, Microsoft Sound System and MPU-401 - compatible card. - It is software-only configurable (no jumpers to hard-set irq/dma/mpu-irq), - so before this module, the only way to configure the DSP under linux was - boot the MS-DOS loading the sound.sys device driver (this driver soft- - configure the sound board hardware by massaging someone of its registers), - and then ctrl-alt-del to boot linux with the DSP configured by the DOS - driver. - - This module works configuring your Audio Excel DSP 16's irq, dma and - mpu-401-irq. The OSS Lite routines rely on the fact that if the - hardware is there, they can detect it. The problem with AEDSP16 is - that no hardware can be found by the probe routines if the sound card - is not configured properly. Sometimes the kernel probe routines can find - an SBPRO even when the card is not configured (this is the standard setup - of the card), but the SBPRO emulation don't work well if the card is not - properly initialized. For this reason - - aedsp16_init_board() - - routine is called before the OSS Lite probe routines try to detect the - hardware. - - NOTE (READ THE NOTE TOO, IT CONTAIN USEFUL INFORMATIONS) - - NOTE: Now it works with SC-6000 and SC-6600 based audio cards. The new cards - have no jumper switch at all. No more WSS or MPU-401 I/O port switches. They - have to be configured by software. - - NOTE: The driver is merged with the new OSS Lite sound driver. It works - as a lowlevel driver. - - The Audio Excel DSP 16 Sound Card emulates both SBPRO and MSS; - the OSS Lite sound driver can be configured for SBPRO and MSS cards - at the same time, but the aedsp16 can't be two cards!! - When we configure it, we have to choose the SBPRO or the MSS emulation - for AEDSP16. We also can install a *REAL* card of the other type (see [1]). - - NOTE: If someone can test the combination AEDSP16+MSS or AEDSP16+SBPRO - please let me know if it works. - - The MPU-401 support can be compiled in together with one of the other - two operating modes. - - NOTE: This is something like plug-and-play: we have only to plug - the AEDSP16 board in the socket, and then configure and compile - a kernel that uses the AEDSP16 software configuration capability. - No jumper setting is needed! - - For example, if you want AEDSP16 to be an SBPro, on irq 10, dma 3 - you have just to make config the OSS Lite package, configuring - the AEDSP16 sound card, then activating the SBPro emulation mode - and at last configuring IRQ and DMA. - Compile the kernel and run it. - - NOTE: This means for SC-6000 cards that you can choose irq and dma, - but not the I/O addresses. To change I/O addresses you have to set - them with jumpers. For SC-6600 cards you have no jumpers so you have - to set up your full card configuration in the make config. - - You can change the irq/dma/mirq settings WITHOUT THE NEED to open - your computer and massage the jumpers (there are no irq/dma/mirq - jumpers to be configured anyway, only I/O BASE values have to be - configured with jumpers) - - For some ununderstandable reason, the card default of irq 7, dma 1, - don't work for me. Seems to be an IRQ or DMA conflict. Under heavy - HDD work, the kernel start to erupt out a lot of messages like: - - 'Sound: DMA timed out - IRQ/DRQ config error?' - - For what I can say, I have NOT any conflict at irq 7 (under linux I'm - using the lp polling driver), and dma line 1 is unused as stated by - /proc/dma. I can suppose this is a bug of AEDSP16. I know my hardware so - I'm pretty sure I have not any conflict, but may be I'm wrong. Who knows! - Anyway a setting of irq 10, dma 3 works really fine. - - NOTE: if someone can use AEDSP16 with irq 7, dma 1, please let me know - the emulation mode, all the installed hardware and the hardware - configuration (irq and dma settings of all the hardware). - - This init module should work with SBPRO+MSS, when one of the two is - the AEDSP16 emulation and the other the real card. (see [1]) - For example: - - AEDSP16 (0x220) in SBPRO emu (0x220) + real MSS + other - AEDSP16 (0x220) in MSS emu + real SBPRO (0x240) + other - - MPU401 should work. (see [2]) - - [1] - --- - Date: Mon, 29 Jul 1997 08:35:40 +0100 - From: Mr S J Greenaway <sjg95@unixfe.rl.ac.uk> - - [...] - Just to let you know got my Audio Excel (emulating a MSS) working - with my original SB16, thanks for the driver! - [...] - --- - - [2] Not tested by me for lack of hardware. - - TODO, WISHES AND TECH - - - About I/O ports allocation - - - Request the 2x0h region (port base) in any case if we are using this card. - - NOTE: the "aedsp16 (base)" string with which we are requesting the aedsp16 - port base region (see code) does not mean necessarily that we are emulating - sbpro. Even if this region is the sbpro I/O ports region, we use this - region to access the control registers of the card, and if emulating - sbpro, I/O sbpro registers too. If we are emulating MSS, the sbpro - registers are not used, in no way, to emulate an sbpro: they are - used only for configuration purposes. - - Started Fri Mar 17 16:13:18 MET 1995 - - v0.1 (ALPHA, was a user-level program called AudioExcelDSP16.c) - - Initial code. - v0.2 (ALPHA) - - Cleanups. - - Integrated with Linux voxware v 2.90-2 kernel sound driver. - - SoundBlaster Pro mode configuration. - - Microsoft Sound System mode configuration. - - MPU-401 mode configuration. - v0.3 (ALPHA) - - Cleanups. - - Rearranged the code to let aedsp16_init_board be more general. - - Erased the REALLY_SLOW_IO. We don't need it. Erased the linux/io.h - inclusion too. We rely on os.h - - Used the to get a variable - len string (we are not sure about the len of Copyright string). - This works with any SB and compatible. - - Added the code to request_region at device init (should go in - the main body of voxware). - v0.4 (BETA) - - Better configure.c patch for aedsp16 configuration (better - logic of inclusion of AEDSP16 support) - - Modified the conditional compilation to better support more than - one sound card of the emulated type (read the NOTES above) - - Moved the sb init routine from the attach to the very first - probe in sb_card.c - - Rearrangements and cleanups - - Wiped out some unnecessary code and variables: this is kernel - code so it is better save some TEXT and DATA - - Fixed the request_region code. We must allocate the aedsp16 (sbpro) - I/O ports in any case because they are used to access the DSP - configuration registers and we can not allow anyone to get them. - v0.5 - - cleanups on comments - - prep for diffs against v3.0-proto-950402 - v0.6 - - removed the request_region()s when compiling the MODULE sound.o - because we are not allowed (by the actual voxware structure) to - release_region() - v0.7 (pre ALPHA, not distributed) - - started porting this module to kernel 1.3.84. Dummy probe/attach - routines. - v0.8 (ALPHA) - - attached all the init routines. - v0.9 (BETA) - - Integrated with linux-pre2.0.7 - - Integrated with configuration scripts. - - Cleaned up and beautyfied the code. - v0.9.9 (BETA) - - Thanks to Piercarlo Grandi: corrected the conditonal compilation code. - Now only the code configured is compiled in, with some memory saving. - v0.9.10 - - Integration into the sound/lowlevel/ section of the sound driver. - - Re-organized the code. - v0.9.11 (not distributed) - - Rewritten the init interface-routines to initialize the AEDSP16 in - one shot. - - More cosmetics. - - SC-6600 support. - - More soft/hard configuration. - v0.9.12 - - Refined the v0.9.11 code with conditional compilation to distinguish - between SC-6000 and SC-6600 code. - v1.0.0 - - Prep for merging with OSS Lite and Linux kernel 2.1.13 - - Corrected a bug in request/check/release region calls (thanks to the - new kernel exception handling). - v1.1 - - Revamped for integration with new modularized sound drivers: to enhance - the flexibility of modular version, I have removed all the conditional - compilation for SBPRO, MPU and MSS code. Now it is all managed with - the ae_config structure. - v1.2 - - Module informations added. - - Removed aedsp16_delay_10msec(), now using mdelay(10) - - All data and funcs moved to .*.init section. - v1.3 - Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/27 - - got rid of check_region - - Known Problems: - - Audio Excel DSP 16 III don't work with this driver. - - Credits: - Many thanks to Gerald Britton <gbritton@CapAccess.org>. He helped me a - lot in testing the 0.9.11 and 0.9.12 versions of this driver. - - */ - - -#define VERSION "1.3" /* Version of Audio Excel DSP 16 driver */ - -#undef AEDSP16_DEBUG /* Define this to 1 to enable debug code */ -#undef AEDSP16_DEBUG_MORE /* Define this to 1 to enable more debug */ -#undef AEDSP16_INFO /* Define this to 1 to enable info code */ - -#if defined(AEDSP16_DEBUG) -# define DBG(x) printk x -# if defined(AEDSP16_DEBUG_MORE) -# define DBG1(x) printk x -# else -# define DBG1(x) -# endif -#else -# define DBG(x) -# define DBG1(x) -#endif - -/* - * Misc definitions - */ -#define TRUE 1 -#define FALSE 0 - -/* - * Region Size for request/check/release region. - */ -#define IOBASE_REGION_SIZE 0x10 - -/* - * Hardware related defaults - */ -#define DEF_AEDSP16_IOB 0x220 /* 0x220(default) 0x240 */ -#define DEF_AEDSP16_IRQ 7 /* 5 7(default) 9 10 11 */ -#define DEF_AEDSP16_MRQ 0 /* 5 7 9 10 0(default), 0 means disable */ -#define DEF_AEDSP16_DMA 1 /* 0 1(default) 3 */ - -/* - * Commands of AEDSP16's DSP (SBPRO+special). - * Some of them are COMMAND_xx, in the future they may change. - */ -#define WRITE_MDIRQ_CFG 0x50 /* Set M&I&DRQ mask (the real config) */ -#define COMMAND_52 0x52 /* */ -#define READ_HARD_CFG 0x58 /* Read Hardware Config (I/O base etc) */ -#define COMMAND_5C 0x5c /* */ -#define COMMAND_60 0x60 /* */ -#define COMMAND_66 0x66 /* */ -#define COMMAND_6C 0x6c /* */ -#define COMMAND_6E 0x6e /* */ -#define COMMAND_88 0x88 /* */ -#define DSP_INIT_MSS 0x8c /* Enable Microsoft Sound System mode */ -#define COMMAND_C5 0xc5 /* */ -#define GET_DSP_VERSION 0xe1 /* Get DSP Version */ -#define GET_DSP_COPYRIGHT 0xe3 /* Get DSP Copyright */ - -/* - * Offsets of AEDSP16 DSP I/O ports. The offset is added to base I/O port - * to have the actual I/O port. - * Register permissions are: - * (wo) == Write Only - * (ro) == Read Only - * (w-) == Write - * (r-) == Read - */ -#define DSP_RESET 0x06 /* offset of DSP RESET (wo) */ -#define DSP_READ 0x0a /* offset of DSP READ (ro) */ -#define DSP_WRITE 0x0c /* offset of DSP WRITE (w-) */ -#define DSP_COMMAND 0x0c /* offset of DSP COMMAND (w-) */ -#define DSP_STATUS 0x0c /* offset of DSP STATUS (r-) */ -#define DSP_DATAVAIL 0x0e /* offset of DSP DATA AVAILABLE (ro) */ - - -#define RETRY 10 /* Various retry values on I/O opera- */ -#define STATUSRETRY 1000 /* tions. Sometimes we have to */ -#define HARDRETRY 500000 /* wait for previous cmd to complete */ - -/* - * Size of character arrays that store name and version of sound card - */ -#define CARDNAMELEN 15 /* Size of the card's name in chars */ -#define CARDVERLEN 10 /* Size of the card's version in chars */ -#define CARDVERDIGITS 2 /* Number of digits in the version */ - -#if defined(CONFIG_SC6600) -/* - * Bitmapped flags of hard configuration - */ -/* - * Decode macros (xl == low byte, xh = high byte) - */ -#define IOBASE(xl) ((xl & 0x01)?0x240:0x220) -#define JOY(xl) (xl & 0x02) -#define MPUADDR(xl) ( \ - (xl & 0x0C)?0x330: \ - (xl & 0x08)?0x320: \ - (xl & 0x04)?0x310: \ - 0x300) -#define WSSADDR(xl) ((xl & 0x10)?0xE80:0x530) -#define CDROM(xh) (xh & 0x20) -#define CDROMADDR(xh) (((xh & 0x1F) << 4) + 0x200) -/* - * Encode macros - */ -#define BLDIOBASE(xl, val) { \ - xl &= ~0x01; \ - if (val == 0x240) \ - xl |= 0x01; \ - } -#define BLDJOY(xl, val) { \ - xl &= ~0x02; \ - if (val == 1) \ - xl |= 0x02; \ - } -#define BLDMPUADDR(xl, val) { \ - xl &= ~0x0C; \ - switch (val) { \ - case 0x330: \ - xl |= 0x0C; \ - break; \ - case 0x320: \ - xl |= 0x08; \ - break; \ - case 0x310: \ - xl |= 0x04; \ - break; \ - case 0x300: \ - xl |= 0x00; \ - break; \ - default: \ - xl |= 0x00; \ - break; \ - } \ - } -#define BLDWSSADDR(xl, val) { \ - xl &= ~0x10; \ - if (val == 0xE80) \ - xl |= 0x10; \ - } -#define BLDCDROM(xh, val) { \ - xh &= ~0x20; \ - if (val == 1) \ - xh |= 0x20; \ - } -#define BLDCDROMADDR(xh, val) { \ - int tmp = val; \ - tmp -= 0x200; \ - tmp >>= 4; \ - tmp &= 0x1F; \ - xh |= tmp; \ - xh &= 0x7F; \ - xh |= 0x40; \ - } -#endif /* CONFIG_SC6600 */ - -/* - * Bit mapped flags for calling aedsp16_init_board(), and saving the current - * emulation mode. - */ -#define INIT_NONE (0 ) -#define INIT_SBPRO (1<<0) -#define INIT_MSS (1<<1) -#define INIT_MPU401 (1<<2) - -static int soft_cfg __initdata = 0; /* bitmapped config */ -static int soft_cfg_mss __initdata = 0; /* bitmapped mss config */ -static int ver[CARDVERDIGITS] __initdata = {0, 0}; /* DSP Ver: - hi->ver[0] lo->ver[1] */ - -#if defined(CONFIG_SC6600) -static int hard_cfg[2] /* lo<-hard_cfg[0] hi<-hard_cfg[1] */ - __initdata = { 0, 0}; -#endif /* CONFIG_SC6600 */ - -#if defined(CONFIG_SC6600) -/* Decoded hard configuration */ -struct d_hcfg { - int iobase; - int joystick; - int mpubase; - int wssbase; - int cdrom; - int cdrombase; -}; - -static struct d_hcfg decoded_hcfg __initdata = {0, }; - -#endif /* CONFIG_SC6600 */ - -/* orVals contain the values to be or'ed */ -struct orVals { - int val; /* irq|mirq|dma */ - int or; /* soft_cfg |= TheStruct.or */ -}; - -/* aedsp16_info contain the audio card configuration */ -struct aedsp16_info { - int base_io; /* base I/O address for accessing card */ - int irq; /* irq value for DSP I/O */ - int mpu_irq; /* irq for mpu401 interface I/O */ - int dma; /* dma value for DSP I/O */ - int mss_base; /* base I/O for Microsoft Sound System */ - int mpu_base; /* base I/O for MPU-401 emulation */ - int init; /* Initialization status of the card */ -}; - -/* - * Magic values that the DSP will eat when configuring irq/mirq/dma - */ -/* DSP IRQ conversion array */ -static struct orVals orIRQ[] __initdata = { - {0x05, 0x28}, - {0x07, 0x08}, - {0x09, 0x10}, - {0x0a, 0x18}, - {0x0b, 0x20}, - {0x00, 0x00} -}; - -/* MPU-401 IRQ conversion array */ -static struct orVals orMIRQ[] __initdata = { - {0x05, 0x04}, - {0x07, 0x44}, - {0x09, 0x84}, - {0x0a, 0xc4}, - {0x00, 0x00} -}; - -/* DMA Channels conversion array */ -static struct orVals orDMA[] __initdata = { - {0x00, 0x01}, - {0x01, 0x02}, - {0x03, 0x03}, - {0x00, 0x00} -}; - -static struct aedsp16_info ae_config = { - .base_io = DEF_AEDSP16_IOB, - .irq = DEF_AEDSP16_IRQ, - .mpu_irq = DEF_AEDSP16_MRQ, - .dma = DEF_AEDSP16_DMA, - .mss_base = -1, - .mpu_base = -1, - .init = INIT_NONE -}; - -/* - * Buffers to store audio card informations - */ -static char DSPCopyright[CARDNAMELEN + 1] __initdata = {0, }; -static char DSPVersion[CARDVERLEN + 1] __initdata = {0, }; - -static int __init aedsp16_wait_data(int port) -{ - int loop = STATUSRETRY; - unsigned char ret = 0; - - DBG1(("aedsp16_wait_data (0x%x): ", port)); - - do { - ret = inb(port + DSP_DATAVAIL); - /* - * Wait for data available (bit 7 of ret == 1) - */ - } while (!(ret & 0x80) && loop--); - - if (ret & 0x80) { - DBG1(("success.\n")); - return TRUE; - } - - DBG1(("failure.\n")); - return FALSE; -} - -static int __init aedsp16_read(int port) -{ - int inbyte; - - DBG((" Read DSP Byte (0x%x): ", port)); - - if (aedsp16_wait_data(port) == FALSE) { - DBG(("failure.\n")); - return -1; - } - - inbyte = inb(port + DSP_READ); - - DBG(("read [0x%x]/{%c}.\n", inbyte, inbyte)); - - return inbyte; -} - -static int __init aedsp16_test_dsp(int port) -{ - return ((aedsp16_read(port) == 0xaa) ? TRUE : FALSE); -} - -static int __init aedsp16_dsp_reset(int port) -{ - /* - * Reset DSP - */ - - DBG(("Reset DSP:\n")); - - outb(1, (port + DSP_RESET)); - udelay(10); - outb(0, (port + DSP_RESET)); - udelay(10); - udelay(10); - if (aedsp16_test_dsp(port) == TRUE) { - DBG(("success.\n")); - return TRUE; - } else - DBG(("failure.\n")); - return FALSE; -} - -static int __init aedsp16_write(int port, int cmd) -{ - unsigned char ret; - int loop = HARDRETRY; - - DBG((" Write DSP Byte (0x%x) [0x%x]: ", port, cmd)); - - do { - ret = inb(port + DSP_STATUS); - /* - * DSP ready to receive data if bit 7 of ret == 0 - */ - if (!(ret & 0x80)) { - outb(cmd, port + DSP_COMMAND); - DBG(("success.\n")); - return 0; - } - } while (loop--); - - DBG(("timeout.\n")); - printk("[AEDSP16] DSP Command (0x%x) timeout.\n", cmd); - - return -1; -} - -#if defined(CONFIG_SC6600) - -#if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG) -void __init aedsp16_pinfo(void) { - DBG(("\n Base address: %x\n", decoded_hcfg.iobase)); - DBG((" Joystick : %s present\n", decoded_hcfg.joystick?"":" not")); - DBG((" WSS addr : %x\n", decoded_hcfg.wssbase)); - DBG((" MPU-401 addr: %x\n", decoded_hcfg.mpubase)); - DBG((" CDROM : %s present\n", (decoded_hcfg.cdrom!=4)?"":" not")); - DBG((" CDROMADDR : %x\n\n", decoded_hcfg.cdrombase)); -} -#endif - -static void __init aedsp16_hard_decode(void) { - - DBG((" aedsp16_hard_decode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1])); - -/* - * Decode Cfg Bytes. - */ - decoded_hcfg.iobase = IOBASE(hard_cfg[0]); - decoded_hcfg.joystick = JOY(hard_cfg[0]); - decoded_hcfg.wssbase = WSSADDR(hard_cfg[0]); - decoded_hcfg.mpubase = MPUADDR(hard_cfg[0]); - decoded_hcfg.cdrom = CDROM(hard_cfg[1]); - decoded_hcfg.cdrombase = CDROMADDR(hard_cfg[1]); - -#if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG) - printk(" Original sound card configuration:\n"); - aedsp16_pinfo(); -#endif - -/* - * Now set up the real kernel configuration. - */ - decoded_hcfg.iobase = ae_config.base_io; - decoded_hcfg.wssbase = ae_config.mss_base; - decoded_hcfg.mpubase = ae_config.mpu_base; - -#if defined(CONFIG_SC6600_JOY) - decoded_hcfg.joystick = CONFIG_SC6600_JOY; /* Enable */ -#endif -#if defined(CONFIG_SC6600_CDROM) - decoded_hcfg.cdrom = CONFIG_SC6600_CDROM; /* 4:N-3:I-2:G-1:P-0:S */ -#endif -#if defined(CONFIG_SC6600_CDROMBASE) - decoded_hcfg.cdrombase = CONFIG_SC6600_CDROMBASE; /* 0 Disable */ -#endif - -#if defined(AEDSP16_DEBUG) - DBG((" New Values:\n")); - aedsp16_pinfo(); -#endif - - DBG(("success.\n")); -} - -static void __init aedsp16_hard_encode(void) { - - DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1])); - - hard_cfg[0] = 0; - hard_cfg[1] = 0; - - hard_cfg[0] |= 0x20; - - BLDIOBASE (hard_cfg[0], decoded_hcfg.iobase); - BLDWSSADDR(hard_cfg[0], decoded_hcfg.wssbase); - BLDMPUADDR(hard_cfg[0], decoded_hcfg.mpubase); - BLDJOY(hard_cfg[0], decoded_hcfg.joystick); - BLDCDROM(hard_cfg[1], decoded_hcfg.cdrom); - BLDCDROMADDR(hard_cfg[1], decoded_hcfg.cdrombase); - -#if defined(AEDSP16_DEBUG) - aedsp16_pinfo(); -#endif - - DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1])); - DBG(("success.\n")); - -} - -static int __init aedsp16_hard_write(int port) { - - DBG(("aedsp16_hard_write:\n")); - - if (aedsp16_write(port, COMMAND_6C)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6C); - DBG(("failure.\n")); - return FALSE; - } - if (aedsp16_write(port, COMMAND_5C)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C); - DBG(("failure.\n")); - return FALSE; - } - if (aedsp16_write(port, hard_cfg[0])) { - printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[0]); - DBG(("failure.\n")); - return FALSE; - } - if (aedsp16_write(port, hard_cfg[1])) { - printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[1]); - DBG(("failure.\n")); - return FALSE; - } - if (aedsp16_write(port, COMMAND_C5)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_C5); - DBG(("failure.\n")); - return FALSE; - } - - DBG(("success.\n")); - - return TRUE; -} - -static int __init aedsp16_hard_read(int port) { - - DBG(("aedsp16_hard_read:\n")); - - if (aedsp16_write(port, READ_HARD_CFG)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", READ_HARD_CFG); - DBG(("failure.\n")); - return FALSE; - } - - if ((hard_cfg[0] = aedsp16_read(port)) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", - READ_HARD_CFG); - DBG(("failure.\n")); - return FALSE; - } - if ((hard_cfg[1] = aedsp16_read(port)) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", - READ_HARD_CFG); - DBG(("failure.\n")); - return FALSE; - } - if (aedsp16_read(port) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", - READ_HARD_CFG); - DBG(("failure.\n")); - return FALSE; - } - - DBG(("success.\n")); - - return TRUE; -} - -static int __init aedsp16_ext_cfg_write(int port) { - - int extcfg, val; - - if (aedsp16_write(port, COMMAND_66)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_66); - return FALSE; - } - - extcfg = 7; - if (decoded_hcfg.cdrom != 2) - extcfg = 0x0F; - if ((decoded_hcfg.cdrom == 4) || - (decoded_hcfg.cdrom == 3)) - extcfg &= ~2; - if (decoded_hcfg.cdrombase == 0) - extcfg &= ~2; - if (decoded_hcfg.mpubase == 0) - extcfg &= ~1; - - if (aedsp16_write(port, extcfg)) { - printk("[AEDSP16] Write extcfg: failed!\n"); - return FALSE; - } - if (aedsp16_write(port, 0)) { - printk("[AEDSP16] Write extcfg: failed!\n"); - return FALSE; - } - if (decoded_hcfg.cdrom == 3) { - if (aedsp16_write(port, COMMAND_52)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52); - return FALSE; - } - if ((val = aedsp16_read(port)) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n" - , COMMAND_52); - return FALSE; - } - val &= 0x7F; - if (aedsp16_write(port, COMMAND_60)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60); - return FALSE; - } - if (aedsp16_write(port, val)) { - printk("[AEDSP16] Write val: failed!\n"); - return FALSE; - } - } - - return TRUE; -} - -#endif /* CONFIG_SC6600 */ - -static int __init aedsp16_cfg_write(int port) { - if (aedsp16_write(port, WRITE_MDIRQ_CFG)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG); - return FALSE; - } - if (aedsp16_write(port, soft_cfg)) { - printk("[AEDSP16] Initialization of (M)IRQ and DMA: failed!\n"); - return FALSE; - } - return TRUE; -} - -static int __init aedsp16_init_mss(int port) -{ - DBG(("aedsp16_init_mss:\n")); - - mdelay(10); - - if (aedsp16_write(port, DSP_INIT_MSS)) { - printk("[AEDSP16] aedsp16_init_mss [0x%x]: failed!\n", - DSP_INIT_MSS); - DBG(("failure.\n")); - return FALSE; - } - - mdelay(10); - - if (aedsp16_cfg_write(port) == FALSE) - return FALSE; - - outb(soft_cfg_mss, ae_config.mss_base); - - DBG(("success.\n")); - - return TRUE; -} - -static int __init aedsp16_setup_board(int port) { - int loop = RETRY; - -#if defined(CONFIG_SC6600) - int val = 0; - - if (aedsp16_hard_read(port) == FALSE) { - printk("[AEDSP16] aedsp16_hard_read: failed!\n"); - return FALSE; - } - - if (aedsp16_write(port, COMMAND_52)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52); - return FALSE; - } - - if ((val = aedsp16_read(port)) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", - COMMAND_52); - return FALSE; - } -#endif - - do { - if (aedsp16_write(port, COMMAND_88)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_88); - return FALSE; - } - mdelay(10); - } while ((aedsp16_wait_data(port) == FALSE) && loop--); - - if (aedsp16_read(port) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", - COMMAND_88); - return FALSE; - } - -#if !defined(CONFIG_SC6600) - if (aedsp16_write(port, COMMAND_5C)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C); - return FALSE; - } -#endif - - if (aedsp16_cfg_write(port) == FALSE) - return FALSE; - -#if defined(CONFIG_SC6600) - if (aedsp16_write(port, COMMAND_60)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60); - return FALSE; - } - if (aedsp16_write(port, val)) { - printk("[AEDSP16] DATA 0x%x: failed!\n", val); - return FALSE; - } - if (aedsp16_write(port, COMMAND_6E)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6E); - return FALSE; - } - if (aedsp16_write(port, ver[0])) { - printk("[AEDSP16] DATA 0x%x: failed!\n", ver[0]); - return FALSE; - } - if (aedsp16_write(port, ver[1])) { - printk("[AEDSP16] DATA 0x%x: failed!\n", ver[1]); - return FALSE; - } - - if (aedsp16_hard_write(port) == FALSE) { - printk("[AEDSP16] aedsp16_hard_write: failed!\n"); - return FALSE; - } - - if (aedsp16_write(port, COMMAND_5C)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C); - return FALSE; - } - -#if defined(THIS_IS_A_THING_I_HAVE_NOT_TESTED_YET) - if (aedsp16_cfg_write(port) == FALSE) - return FALSE; -#endif - -#endif - - return TRUE; -} - -static int __init aedsp16_stdcfg(int port) { - if (aedsp16_write(port, WRITE_MDIRQ_CFG)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG); - return FALSE; - } - /* - * 0x0A == (IRQ 7, DMA 1, MIRQ 0) - */ - if (aedsp16_write(port, 0x0A)) { - printk("[AEDSP16] aedsp16_stdcfg: failed!\n"); - return FALSE; - } - return TRUE; -} - -static int __init aedsp16_dsp_version(int port) -{ - int len = 0; - int ret; - - DBG(("Get DSP Version:\n")); - - if (aedsp16_write(ae_config.base_io, GET_DSP_VERSION)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_VERSION); - DBG(("failed.\n")); - return FALSE; - } - - do { - if ((ret = aedsp16_read(port)) == -1) { - DBG(("failed.\n")); - return FALSE; - } - /* - * We already know how many int are stored (2), so we know when the - * string is finished. - */ - ver[len++] = ret; - } while (len < CARDVERDIGITS); - sprintf(DSPVersion, "%d.%d", ver[0], ver[1]); - - DBG(("success.\n")); - - return TRUE; -} - -static int __init aedsp16_dsp_copyright(int port) -{ - int len = 0; - int ret; - - DBG(("Get DSP Copyright:\n")); - - if (aedsp16_write(ae_config.base_io, GET_DSP_COPYRIGHT)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_COPYRIGHT); - DBG(("failed.\n")); - return FALSE; - } - - do { - if ((ret = aedsp16_read(port)) == -1) { - /* - * If no more data available, return to the caller, no error if len>0. - * We have no other way to know when the string is finished. - */ - if (len) - break; - else { - DBG(("failed.\n")); - return FALSE; - } - } - - DSPCopyright[len++] = ret; - - } while (len < CARDNAMELEN); - - DBG(("success.\n")); - - return TRUE; -} - -static void __init aedsp16_init_tables(void) -{ - int i = 0; - - memset(DSPCopyright, 0, CARDNAMELEN + 1); - memset(DSPVersion, 0, CARDVERLEN + 1); - - for (i = 0; orIRQ[i].or; i++) - if (orIRQ[i].val == ae_config.irq) { - soft_cfg |= orIRQ[i].or; - soft_cfg_mss |= orIRQ[i].or; - } - - for (i = 0; orMIRQ[i].or; i++) - if (orMIRQ[i].or == ae_config.mpu_irq) - soft_cfg |= orMIRQ[i].or; - - for (i = 0; orDMA[i].or; i++) - if (orDMA[i].val == ae_config.dma) { - soft_cfg |= orDMA[i].or; - soft_cfg_mss |= orDMA[i].or; - } -} - -static int __init aedsp16_init_board(void) -{ - aedsp16_init_tables(); - - if (aedsp16_dsp_reset(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_dsp_reset: failed!\n"); - return FALSE; - } - if (aedsp16_dsp_copyright(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_dsp_copyright: failed!\n"); - return FALSE; - } - - /* - * My AEDSP16 card return SC-6000 in DSPCopyright, so - * if we have something different, we have to be warned. - */ - if (strcmp("SC-6000", DSPCopyright)) - printk("[AEDSP16] Warning: non SC-6000 audio card!\n"); - - if (aedsp16_dsp_version(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_dsp_version: failed!\n"); - return FALSE; - } - - if (aedsp16_stdcfg(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_stdcfg: failed!\n"); - return FALSE; - } - -#if defined(CONFIG_SC6600) - if (aedsp16_hard_read(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_hard_read: failed!\n"); - return FALSE; - } - - aedsp16_hard_decode(); - - aedsp16_hard_encode(); - - if (aedsp16_hard_write(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_hard_write: failed!\n"); - return FALSE; - } - - if (aedsp16_ext_cfg_write(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_ext_cfg_write: failed!\n"); - return FALSE; - } -#endif /* CONFIG_SC6600 */ - - if (aedsp16_setup_board(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_setup_board: failed!\n"); - return FALSE; - } - - if (ae_config.mss_base != -1) { - if (ae_config.init & INIT_MSS) { - if (aedsp16_init_mss(ae_config.base_io) == FALSE) { - printk("[AEDSP16] Can not initialize" - "Microsoft Sound System mode.\n"); - return FALSE; - } - } - } - -#if !defined(MODULE) || defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG) - - printk("Audio Excel DSP 16 init v%s (%s %s) [", - VERSION, DSPCopyright, - DSPVersion); - - if (ae_config.mpu_base != -1) { - if (ae_config.init & INIT_MPU401) { - printk("MPU401"); - if ((ae_config.init & INIT_MSS) || - (ae_config.init & INIT_SBPRO)) - printk(" "); - } - } - - if (ae_config.mss_base == -1) { - if (ae_config.init & INIT_SBPRO) { - printk("SBPro"); - if (ae_config.init & INIT_MSS) - printk(" "); - } - } - - if (ae_config.mss_base != -1) - if (ae_config.init & INIT_MSS) - printk("MSS"); - - printk("]\n"); -#endif /* MODULE || AEDSP16_INFO || AEDSP16_DEBUG */ - - mdelay(10); - - return TRUE; -} - -static int __init init_aedsp16_sb(void) -{ - DBG(("init_aedsp16_sb: ")); - -/* - * If the card is already init'ed MSS, we can not init it to SBPRO too - * because the board can not emulate simultaneously MSS and SBPRO. - */ - if (ae_config.init & INIT_MSS) - return FALSE; - if (ae_config.init & INIT_SBPRO) - return FALSE; - - ae_config.init |= INIT_SBPRO; - - DBG(("done.\n")); - - return TRUE; -} - -static void uninit_aedsp16_sb(void) -{ - DBG(("uninit_aedsp16_sb: ")); - - ae_config.init &= ~INIT_SBPRO; - - DBG(("done.\n")); -} - -static int __init init_aedsp16_mss(void) -{ - DBG(("init_aedsp16_mss: ")); - -/* - * If the card is already init'ed SBPRO, we can not init it to MSS too - * because the board can not emulate simultaneously MSS and SBPRO. - */ - if (ae_config.init & INIT_SBPRO) - return FALSE; - if (ae_config.init & INIT_MSS) - return FALSE; -/* - * We must allocate the CONFIG_AEDSP16_BASE region too because these are the - * I/O ports to access card's control registers. - */ - if (!(ae_config.init & INIT_MPU401)) { - if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE, - "aedsp16 (base)")) { - printk( - "AEDSP16 BASE I/O port region is already in use.\n"); - return FALSE; - } - } - - ae_config.init |= INIT_MSS; - - DBG(("done.\n")); - - return TRUE; -} - -static void uninit_aedsp16_mss(void) -{ - DBG(("uninit_aedsp16_mss: ")); - - if ((!(ae_config.init & INIT_MPU401)) && - (ae_config.init & INIT_MSS)) { - release_region(ae_config.base_io, IOBASE_REGION_SIZE); - DBG(("AEDSP16 base region released.\n")); - } - - ae_config.init &= ~INIT_MSS; - DBG(("done.\n")); -} - -static int __init init_aedsp16_mpu(void) -{ - DBG(("init_aedsp16_mpu: ")); - - if (ae_config.init & INIT_MPU401) - return FALSE; - -/* - * We must request the CONFIG_AEDSP16_BASE region too because these are the I/O - * ports to access card's control registers. - */ - if (!(ae_config.init & (INIT_MSS | INIT_SBPRO))) { - if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE, - "aedsp16 (base)")) { - printk( - "AEDSP16 BASE I/O port region is already in use.\n"); - return FALSE; - } - } - - ae_config.init |= INIT_MPU401; - - DBG(("done.\n")); - - return TRUE; -} - -static void uninit_aedsp16_mpu(void) -{ - DBG(("uninit_aedsp16_mpu: ")); - - if ((!(ae_config.init & (INIT_MSS | INIT_SBPRO))) && - (ae_config.init & INIT_MPU401)) { - release_region(ae_config.base_io, IOBASE_REGION_SIZE); - DBG(("AEDSP16 base region released.\n")); - } - - ae_config.init &= ~INIT_MPU401; - - DBG(("done.\n")); -} - -static int __init init_aedsp16(void) -{ - int initialized = FALSE; - - DBG(("Initializing BASE[0x%x] IRQ[%d] DMA[%d] MIRQ[%d]\n", - ae_config.base_io,ae_config.irq,ae_config.dma,ae_config.mpu_irq)); - - if (ae_config.mss_base == -1) { - if (init_aedsp16_sb() == FALSE) { - uninit_aedsp16_sb(); - } else { - initialized = TRUE; - } - } - - if (ae_config.mpu_base != -1) { - if (init_aedsp16_mpu() == FALSE) { - uninit_aedsp16_mpu(); - } else { - initialized = TRUE; - } - } - -/* - * In the sequence of init routines, the MSS init MUST be the last! - * This because of the special register programming the MSS mode needs. - * A board reset would disable the MSS mode restoring the default SBPRO - * mode. - */ - if (ae_config.mss_base != -1) { - if (init_aedsp16_mss() == FALSE) { - uninit_aedsp16_mss(); - } else { - initialized = TRUE; - } - } - - if (initialized) - initialized = aedsp16_init_board(); - return initialized; -} - -static void __exit uninit_aedsp16(void) -{ - if (ae_config.mss_base != -1) - uninit_aedsp16_mss(); - else - uninit_aedsp16_sb(); - if (ae_config.mpu_base != -1) - uninit_aedsp16_mpu(); -} - -static int __initdata io = -1; -static int __initdata irq = -1; -static int __initdata dma = -1; -static int __initdata mpu_irq = -1; -static int __initdata mss_base = -1; -static int __initdata mpu_base = -1; - -module_param_hw(io, int, ioport, 0); -MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)"); -module_param_hw(irq, int, irq, 0); -MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)"); -module_param_hw(dma, int, dma, 0); -MODULE_PARM_DESC(dma, "dma line (0 1 3)"); -module_param_hw(mpu_irq, int, irq, 0); -MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)"); -module_param_hw(mss_base, int, ioport, 0); -MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)"); -module_param_hw(mpu_base, int, ioport, 0); -MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)"); -MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>"); -MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION); -MODULE_LICENSE("GPL"); - -static int __init do_init_aedsp16(void) { - printk("Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98\n"); - if (io == -1 || dma == -1 || irq == -1) { - printk(KERN_INFO "aedsp16: I/O, IRQ and DMA are mandatory\n"); - return -EINVAL; - } - - ae_config.base_io = io; - ae_config.irq = irq; - ae_config.dma = dma; - - ae_config.mss_base = mss_base; - ae_config.mpu_base = mpu_base; - ae_config.mpu_irq = mpu_irq; - - if (init_aedsp16() == FALSE) { - printk(KERN_ERR "aedsp16: initialization failed\n"); - /* - * XXX - * What error should we return here ? - */ - return -EINVAL; - } - return 0; -} - -static void __exit cleanup_aedsp16(void) { - uninit_aedsp16(); -} - -module_init(do_init_aedsp16); -module_exit(cleanup_aedsp16); - -#ifndef MODULE -static int __init setup_aedsp16(char *str) -{ - /* io, irq, dma, mss_io, mpu_io, mpu_irq */ - int ints[7]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - irq = ints[2]; - dma = ints[3]; - mss_base = ints[4]; - mpu_base = ints[5]; - mpu_irq = ints[6]; - return 1; -} - -__setup("aedsp16=", setup_aedsp16); -#endif |