diff options
Diffstat (limited to 'include/uapi/linux/wimax.h')
| -rw-r--r-- | include/uapi/linux/wimax.h | 239 |
1 files changed, 0 insertions, 239 deletions
diff --git a/include/uapi/linux/wimax.h b/include/uapi/linux/wimax.h deleted file mode 100644 index 9f6b77af2f6d..000000000000 --- a/include/uapi/linux/wimax.h +++ /dev/null @@ -1,239 +0,0 @@ -/* - * Linux WiMax - * API for user space - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation <linux-wimax@intel.com> - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - Initial implementation - * - * - * This file declares the user/kernel protocol that is spoken over - * Generic Netlink, as well as any type declaration that is to be used - * by kernel and user space. - * - * It is intended for user space to clone it verbatim to use it as a - * primary reference for definitions. - * - * Stuff intended for kernel usage as well as full protocol and stack - * documentation is rooted in include/net/wimax.h. - */ - -#ifndef __LINUX__WIMAX_H__ -#define __LINUX__WIMAX_H__ - -#include <linux/types.h> - -enum { - /** - * Version of the interface (unsigned decimal, MMm, max 25.5) - * M - Major: change if removing or modifying an existing call. - * m - minor: change when adding a new call - */ - WIMAX_GNL_VERSION = 01, - /* Generic NetLink attributes */ - WIMAX_GNL_ATTR_INVALID = 0x00, - WIMAX_GNL_ATTR_MAX = 10, -}; - - -/* - * Generic NetLink operations - * - * Most of these map to an API call; _OP_ stands for operation, _RP_ - * for reply and _RE_ for report (aka: signal). - */ -enum { - WIMAX_GNL_OP_MSG_FROM_USER, /* User to kernel message */ - WIMAX_GNL_OP_MSG_TO_USER, /* Kernel to user message */ - WIMAX_GNL_OP_RFKILL, /* Run wimax_rfkill() */ - WIMAX_GNL_OP_RESET, /* Run wimax_rfkill() */ - WIMAX_GNL_RE_STATE_CHANGE, /* Report: status change */ - WIMAX_GNL_OP_STATE_GET, /* Request for current state */ -}; - - -/* Message from user / to user */ -enum { - WIMAX_GNL_MSG_IFIDX = 1, - WIMAX_GNL_MSG_PIPE_NAME, - WIMAX_GNL_MSG_DATA, -}; - - -/* - * wimax_rfkill() - * - * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's - * switch state (DISABLED/ENABLED). - */ -enum wimax_rf_state { - WIMAX_RF_OFF = 0, /* Radio is off, rfkill on/enabled */ - WIMAX_RF_ON = 1, /* Radio is on, rfkill off/disabled */ - WIMAX_RF_QUERY = 2, -}; - -/* Attributes */ -enum { - WIMAX_GNL_RFKILL_IFIDX = 1, - WIMAX_GNL_RFKILL_STATE, -}; - - -/* Attributes for wimax_reset() */ -enum { - WIMAX_GNL_RESET_IFIDX = 1, -}; - -/* Attributes for wimax_state_get() */ -enum { - WIMAX_GNL_STGET_IFIDX = 1, -}; - -/* - * Attributes for the Report State Change - * - * For now we just have the old and new states; new attributes might - * be added later on. - */ -enum { - WIMAX_GNL_STCH_IFIDX = 1, - WIMAX_GNL_STCH_STATE_OLD, - WIMAX_GNL_STCH_STATE_NEW, -}; - - -/** - * enum wimax_st - The different states of a WiMAX device - * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed, - * but still wimax_dev_add() hasn't been called. There is no state. - * - * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and - * networking stacks, but it is not initialized (normally that is - * done with 'ifconfig DEV up' [or equivalent], which can upload - * firmware and enable communications with the device). - * In this state, the device is powered down and using as less - * power as possible. - * This state is the default after a call to wimax_dev_add(). It - * is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED - * or %WIMAX_ST_RADIO_OFF in _probe() after the call to - * wimax_dev_add(). - * It is recommended that the driver leaves this state when - * calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV - * down'. - * - * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API - * operations are allowed to proceed except the ones needed to - * complete the device clean up process. - * - * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device - * is setup, but the device still requires some configuration - * before being operational. - * Some WiMAX API calls might work. - * - * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether - * by hardware or software switches). - * It is recommended to always leave the device in this state - * after initialization. - * - * @WIMAX_ST_READY: The device is fully up and radio is on. - * - * @WIMAX_ST_SCANNING: [optional] The device has been instructed to - * scan. In this state, the device cannot be actively connected to - * a network. - * - * @WIMAX_ST_CONNECTING: The device is connecting to a network. This - * state exists because in some devices, the connect process can - * include a number of negotiations between user space, kernel - * space and the device. User space needs to know what the device - * is doing. If the connect sequence in a device is atomic and - * fast, the device can transition directly to CONNECTED - * - * @WIMAX_ST_CONNECTED: The device is connected to a network. - * - * @__WIMAX_ST_INVALID: This is an invalid state used to mark the - * maximum numeric value of states. - * - * Description: - * - * Transitions from one state to another one are atomic and can only - * be caused in kernel space with wimax_state_change(). To read the - * state, use wimax_state_get(). - * - * States starting with __ are internal and shall not be used or - * referred to by drivers or userspace. They look ugly, but that's the - * point -- if any use is made non-internal to the stack, it is easier - * to catch on review. - * - * All API operations [with well defined exceptions] will take the - * device mutex before starting and then check the state. If the state - * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or - * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with - * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN. - * - * The order of the definitions is important, so we can do numerical - * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready - * to operate). - */ -/* - * The allowed state transitions are described in the table below - * (states in rows can go to states in columns where there is an X): - * - * UNINI RADIO READY SCAN CONNEC CONNEC - * NULL DOWN QUIESCING TIALIZED OFF NING TING TED - * NULL - x - * DOWN - x x x - * QUIESCING x - - * UNINITIALIZED x - x - * RADIO_OFF x - x - * READY x x - x x x - * SCANNING x x x - x x - * CONNECTING x x x x - x - * CONNECTED x x x - - * - * This table not available in kernel-doc because the formatting messes it up. - */ - enum wimax_st { - __WIMAX_ST_NULL = 0, - WIMAX_ST_DOWN, - __WIMAX_ST_QUIESCING, - WIMAX_ST_UNINITIALIZED, - WIMAX_ST_RADIO_OFF, - WIMAX_ST_READY, - WIMAX_ST_SCANNING, - WIMAX_ST_CONNECTING, - WIMAX_ST_CONNECTED, - __WIMAX_ST_INVALID /* Always keep last */ -}; - - -#endif /* #ifndef __LINUX__WIMAX_H__ */ |