diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 82 |
1 files changed, 51 insertions, 31 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 5345d358a510..b9a08cd1d97d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -147,7 +147,6 @@ enum ieee80211_ac_numbers { IEEE80211_AC_BE = 2, IEEE80211_AC_BK = 3, }; -#define IEEE80211_NUM_ACS 4 /** * struct ieee80211_tx_queue_params - transmit queue configuration @@ -1018,7 +1017,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware. * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame, * verification has been done by the hardware. - * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame. + * @RX_FLAG_IV_STRIPPED: The IV and ICV are stripped from this frame. * If this flag is set, the stack cannot do any replay detection * hence the driver or hardware will have to do that. * @RX_FLAG_PN_VALIDATED: Currently only valid for CCMP/GCMP frames, this @@ -1089,6 +1088,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_ALLOW_SAME_PN: Allow the same PN as same packet before. * This is used for AMSDU subframes which can have the same PN as * the first subframe. + * @RX_FLAG_ICV_STRIPPED: The ICV is stripped from this frame. CRC checking must + * be done in the hardware. */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = BIT(0), @@ -1124,6 +1125,7 @@ enum mac80211_rx_flags { RX_FLAG_RADIOTAP_VENDOR_DATA = BIT(31), RX_FLAG_MIC_STRIPPED = BIT_ULL(32), RX_FLAG_ALLOW_SAME_PN = BIT_ULL(33), + RX_FLAG_ICV_STRIPPED = BIT_ULL(34), }; #define RX_FLAG_STBC_SHIFT 26 @@ -1766,15 +1768,6 @@ struct ieee80211_sta_rates { * @max_amsdu_subframes: indicates the maximal number of MSDUs in a single * A-MSDU. Taken from the Extended Capabilities element. 0 means * unlimited. - * @max_amsdu_len: indicates the maximal length of an A-MSDU in bytes. This - * field is always valid for packets with a VHT preamble. For packets - * with a HT preamble, additional limits apply: - * + If the skb is transmitted as part of a BA agreement, the - * A-MSDU maximal size is min(max_amsdu_len, 4065) bytes. - * + If the skb is not part of a BA aggreement, the A-MSDU maximal - * size is min(max_amsdu_len, 7935) bytes. - * Both additional HT limits must be enforced by the low level driver. - * This is defined by the spec (IEEE 802.11-2012 section 8.3.2.2 NOTE 2). * @support_p2p_ps: indicates whether the STA supports P2P PS mechanism or not. * @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control. * @txq: per-TID data TX queues (if driver uses the TXQ abstraction) @@ -1797,6 +1790,22 @@ struct ieee80211_sta { bool tdls_initiator; bool mfp; u8 max_amsdu_subframes; + + /** + * @max_amsdu_len: + * indicates the maximal length of an A-MSDU in bytes. + * This field is always valid for packets with a VHT preamble. + * For packets with a HT preamble, additional limits apply: + * + * * If the skb is transmitted as part of a BA agreement, the + * A-MSDU maximal size is min(max_amsdu_len, 4065) bytes. + * * If the skb is not part of a BA aggreement, the A-MSDU maximal + * size is min(max_amsdu_len, 7935) bytes. + * + * Both additional HT limits must be enforced by the low level + * driver. This is defined by the spec (IEEE 802.11-2012 section + * 8.3.2.2 NOTE 2). + */ u16 max_amsdu_len; bool support_p2p_ps; u16 max_rc_amsdu_len; @@ -3201,26 +3210,6 @@ enum ieee80211_reconfig_type { * Returns non-zero if this device sent the last beacon. * The callback can sleep. * - * @ampdu_action: Perform a certain A-MPDU action - * The RA/TID combination determines the destination and TID we want - * the ampdu action to be performed for. The action is defined through - * ieee80211_ampdu_mlme_action. - * When the action is set to %IEEE80211_AMPDU_TX_OPERATIONAL the driver - * may neither send aggregates containing more subframes than @buf_size - * nor send aggregates in a way that lost frames would exceed the - * buffer size. If just limiting the aggregate size, this would be - * possible with a buf_size of 8: - * - TX: 1.....7 - * - RX: 2....7 (lost frame #1) - * - TX: 8..1... - * which is invalid since #1 was now re-transmitted well past the - * buffer size of 8. Correct ways to retransmit #1 would be: - * - TX: 1 or 18 or 81 - * Even "189" would be wrong since 1 could be lost again. - * - * Returns a negative error code on failure. - * The callback can sleep. - * * @get_survey: Return per-channel survey information * * @rfkill_poll: Poll rfkill hardware state. If you need this, you also @@ -3573,6 +3562,35 @@ struct ieee80211_ops { s64 offset); void (*reset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); int (*tx_last_beacon)(struct ieee80211_hw *hw); + + /** + * @ampdu_action: + * Perform a certain A-MPDU action. + * The RA/TID combination determines the destination and TID we want + * the ampdu action to be performed for. The action is defined through + * ieee80211_ampdu_mlme_action. + * When the action is set to %IEEE80211_AMPDU_TX_OPERATIONAL the driver + * may neither send aggregates containing more subframes than @buf_size + * nor send aggregates in a way that lost frames would exceed the + * buffer size. If just limiting the aggregate size, this would be + * possible with a buf_size of 8: + * + * - ``TX: 1.....7`` + * - ``RX: 2....7`` (lost frame #1) + * - ``TX: 8..1...`` + * + * which is invalid since #1 was now re-transmitted well past the + * buffer size of 8. Correct ways to retransmit #1 would be: + * + * - ``TX: 1 or`` + * - ``TX: 18 or`` + * - ``TX: 81`` + * + * Even ``189`` would be wrong since 1 could be lost again. + * + * Returns a negative error code on failure. + * The callback can sleep. + */ int (*ampdu_action)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_ampdu_params *params); @@ -5260,6 +5278,7 @@ void ieee80211_resume_disconnect(struct ieee80211_vif *vif); * * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @rssi_event: the RSSI trigger event type + * @rssi_level: new RSSI level value or 0 if not available * @gfp: context flags * * When the %IEEE80211_VIF_SUPPORTS_CQM_RSSI is set, and a connection quality @@ -5268,6 +5287,7 @@ void ieee80211_resume_disconnect(struct ieee80211_vif *vif); */ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, enum nl80211_cqm_rssi_threshold_event rssi_event, + s32 rssi_level, gfp_t gfp); /** |