diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 149 |
1 files changed, 144 insertions, 5 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 5f203a6a5e7e..cff3a26a9dae 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -882,6 +882,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * subframes share the same sequence number. Reported subframes can be * either regular MSDU or singly A-MSDUs. Subframes must not be * interleaved with other frames. + * @RX_FLAG_RADIOTAP_VENDOR_DATA: This frame contains vendor-specific + * radiotap data in the skb->data (before the frame) as described by + * the &struct ieee80211_vendor_radiotap. */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = BIT(0), @@ -911,6 +914,7 @@ enum mac80211_rx_flags { RX_FLAG_10MHZ = BIT(28), RX_FLAG_5MHZ = BIT(29), RX_FLAG_AMSDU_MORE = BIT(30), + RX_FLAG_RADIOTAP_VENDOR_DATA = BIT(31), }; #define RX_FLAG_STBC_SHIFT 26 @@ -982,6 +986,39 @@ struct ieee80211_rx_status { }; /** + * struct ieee80211_vendor_radiotap - vendor radiotap data information + * @present: presence bitmap for this vendor namespace + * (this could be extended in the future if any vendor needs more + * bits, the radiotap spec does allow for that) + * @align: radiotap vendor namespace alignment. This defines the needed + * alignment for the @data field below, not for the vendor namespace + * description itself (which has a fixed 2-byte alignment) + * Must be a power of two, and be set to at least 1! + * @oui: radiotap vendor namespace OUI + * @subns: radiotap vendor sub namespace + * @len: radiotap vendor sub namespace skip length, if alignment is done + * then that's added to this, i.e. this is only the length of the + * @data field. + * @pad: number of bytes of padding after the @data, this exists so that + * the skb data alignment can be preserved even if the data has odd + * length + * @data: the actual vendor namespace data + * + * This struct, including the vendor data, goes into the skb->data before + * the 802.11 header. It's split up in mac80211 using the align/oui/subns + * data. + */ +struct ieee80211_vendor_radiotap { + u32 present; + u8 align; + u8 oui[3]; + u8 subns; + u8 pad; + u16 len; + u8 data[]; +} __packed; + +/** * enum ieee80211_conf_flags - configuration flags * * Flags to define PHY configuration options @@ -1790,6 +1827,31 @@ struct ieee80211_scan_request { }; /** + * struct ieee80211_tdls_ch_sw_params - TDLS channel switch parameters + * + * @sta: peer this TDLS channel-switch request/response came from + * @chandef: channel referenced in a TDLS channel-switch request + * @action_code: see &enum ieee80211_tdls_actioncode + * @status: channel-switch response status + * @timestamp: time at which the frame was received + * @switch_time: switch-timing parameter received in the frame + * @switch_timeout: switch-timing parameter received in the frame + * @tmpl_skb: TDLS switch-channel response template + * @ch_sw_tm_ie: offset of the channel-switch timing IE inside @tmpl_skb + */ +struct ieee80211_tdls_ch_sw_params { + struct ieee80211_sta *sta; + struct cfg80211_chan_def *chandef; + u8 action_code; + u32 status; + u32 timestamp; + u16 switch_time; + u16 switch_timeout; + struct sk_buff *tmpl_skb; + u32 ch_sw_tm_ie; +}; + +/** * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy * * @wiphy: the &struct wiphy which we want to query @@ -2560,7 +2622,9 @@ enum ieee80211_reconfig_type { * * @sw_scan_start: Notifier function that is called just before a software scan * is started. Can be NULL, if the driver doesn't need this notification. - * The callback can sleep. + * The mac_addr parameter allows supporting NL80211_SCAN_FLAG_RANDOM_ADDR, + * the driver may set the NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR flag if it + * can use this parameter. The callback can sleep. * * @sw_scan_complete: Notifier function that is called just after a * software scan finished. Can be NULL, if the driver doesn't need @@ -2631,6 +2695,9 @@ enum ieee80211_reconfig_type { * uses hardware rate control (%IEEE80211_HW_HAS_RATE_CONTROL) since * otherwise the rate control algorithm is notified directly. * Must be atomic. + * @sta_rate_tbl_update: Notifies the driver that the rate table changed. This + * is only used if the configured rate control algorithm actually uses + * the new rate table API, and is therefore optional. Must be atomic. * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * bursting) for a hardware TX queue. @@ -2878,6 +2945,23 @@ enum ieee80211_reconfig_type { * * @get_txpower: get current maximum tx power (in dBm) based on configuration * and hardware limits. + * + * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver + * is responsible for continually initiating channel-switching operations + * and returning to the base channel for communication with the AP. The + * driver receives a channel-switch request template and the location of + * the switch-timing IE within the template as part of the invocation. + * The template is valid only within the call, and the driver can + * optionally copy the skb for further re-use. + * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both + * peers must be on the base channel when the call completes. + * @tdls_recv_channel_switch: a TDLS channel-switch related frame (request or + * response) has been received from a remote peer. The driver gets + * parameters parsed from the incoming frame and may use them to continue + * an ongoing channel-switch operation. In addition, a channel-switch + * response template is provided, together with the location of the + * switch-timing IE within the template. The skb can only be used within + * the function call. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2937,8 +3021,11 @@ struct ieee80211_ops { struct ieee80211_scan_ies *ies); int (*sched_scan_stop)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); - void (*sw_scan_start)(struct ieee80211_hw *hw); - void (*sw_scan_complete)(struct ieee80211_hw *hw); + void (*sw_scan_start)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const u8 *mac_addr); + void (*sw_scan_complete)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); int (*get_stats)(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats); void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx, @@ -2972,6 +3059,9 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct ieee80211_sta *sta, u32 changed); + void (*sta_rate_tbl_update)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); int (*conf_tx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 ac, const struct ieee80211_tx_queue_params *params); @@ -3089,6 +3179,18 @@ struct ieee80211_ops { u32 (*get_expected_throughput)(struct ieee80211_sta *sta); int (*get_txpower)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int *dbm); + + int (*tdls_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, u8 oper_class, + struct cfg80211_chan_def *chandef, + struct sk_buff *tmpl_skb, u32 ch_sw_tm_ie); + void (*tdls_cancel_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta); + void (*tdls_recv_channel_switch)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_tdls_ch_sw_params *params); }; /** @@ -3729,7 +3831,7 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, /** * ieee80211_probereq_get - retrieve a Probe Request template * @hw: pointer obtained from ieee80211_alloc_hw(). - * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @src_addr: source MAC address * @ssid: SSID buffer * @ssid_len: length of SSID * @tailroom: tailroom to reserve at end of SKB for IEs @@ -3740,7 +3842,7 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, * Return: The Probe Request template. %NULL on error. */ struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, + const u8 *src_addr, const u8 *ssid, size_t ssid_len, size_t tailroom); @@ -4980,6 +5082,43 @@ void ieee80211_tdls_oper_request(struct ieee80211_vif *vif, const u8 *peer, u16 reason_code, gfp_t gfp); /** + * ieee80211_reserve_tid - request to reserve a specific TID + * + * There is sometimes a need (such as in TDLS) for blocking the driver from + * using a specific TID so that the FW can use it for certain operations such + * as sending PTI requests. To make sure that the driver doesn't use that TID, + * this function must be called as it flushes out packets on this TID and marks + * it as blocked, so that any transmit for the station on this TID will be + * redirected to the alternative TID in the same AC. + * + * Note that this function blocks and may call back into the driver, so it + * should be called without driver locks held. Also note this function should + * only be called from the driver's @sta_state callback. + * + * @sta: the station to reserve the TID for + * @tid: the TID to reserve + * + * Returns: 0 on success, else on failure + */ +int ieee80211_reserve_tid(struct ieee80211_sta *sta, u8 tid); + +/** + * ieee80211_unreserve_tid - request to unreserve a specific TID + * + * Once there is no longer any need for reserving a certain TID, this function + * should be called, and no longer will packets have their TID modified for + * preventing use of this TID in the driver. + * + * Note that this function blocks and acquires a lock, so it should be called + * without driver locks held. Also note this function should only be called + * from the driver's @sta_state callback. + * + * @sta: the station + * @tid: the TID to unreserve + */ +void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid); + +/** * ieee80211_ie_split - split an IE buffer according to ordering * * @ies: the IE buffer |