diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/mtd/nand.h | 30 | ||||
| -rw-r--r-- | include/linux/platform_data/mtd-nand-s3c2410.h | 7 |
2 files changed, 35 insertions, 2 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index d8905a229f34..c5f3a012ae62 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -142,6 +142,12 @@ enum nand_ecc_algo { */ #define NAND_ECC_GENERIC_ERASED_CHECK BIT(0) #define NAND_ECC_MAXIMIZE BIT(1) +/* + * If your controller already sends the required NAND commands when + * reading or writing a page, then the framework is not supposed to + * send READ0 and SEQIN/PAGEPROG respectively. + */ +#define NAND_ECC_CUSTOM_PAGE_ACCESS BIT(2) /* Bit mask for flags passed to do_nand_read_ecc */ #define NAND_GET_DEVICE 0x80 @@ -186,6 +192,7 @@ enum nand_ecc_algo { /* Macros to identify the above */ #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) #define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) +#define NAND_HAS_SUBPAGE_WRITE(chip) !((chip)->options & NAND_NO_SUBPAGE_WRITE) /* Non chip related options */ /* This option skips the bbt scan during initialization. */ @@ -210,6 +217,16 @@ enum nand_ecc_algo { */ #define NAND_USE_BOUNCE_BUFFER 0x00100000 +/* + * In case your controller is implementing ->cmd_ctrl() and is relying on the + * default ->cmdfunc() implementation, you may want to let the core handle the + * tCCS delay which is required when a column change (RNDIN or RNDOUT) is + * requested. + * If your controller already takes care of this delay, you don't need to set + * this flag. + */ +#define NAND_WAIT_TCCS 0x00200000 + /* Options set by nand scan */ /* Nand scan has allocated controller struct */ #define NAND_CONTROLLER_ALLOC 0x80000000 @@ -558,6 +575,11 @@ struct nand_ecc_ctrl { int page); }; +static inline int nand_standard_page_accessors(struct nand_ecc_ctrl *ecc) +{ + return !(ecc->options & NAND_ECC_CUSTOM_PAGE_ACCESS); +} + /** * struct nand_buffers - buffer structure for read/write * @ecccalc: buffer pointer for calculated ECC, size is oobsize. @@ -584,6 +606,10 @@ struct nand_buffers { * * All these timings are expressed in picoseconds. * + * @tBERS_max: Block erase time + * @tCCS_min: Change column setup time + * @tPROG_max: Page program time + * @tR_max: Page read time * @tALH_min: ALE hold time * @tADL_min: ALE to data loading time * @tALS_min: ALE setup time @@ -621,6 +647,10 @@ struct nand_buffers { * @tWW_min: WP# transition to WE# low */ struct nand_sdr_timings { + u32 tBERS_max; + u32 tCCS_min; + u32 tPROG_max; + u32 tR_max; u32 tALH_min; u32 tADL_min; u32 tALS_min; diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h index c55e42ee57fa..f01659026b26 100644 --- a/include/linux/platform_data/mtd-nand-s3c2410.h +++ b/include/linux/platform_data/mtd-nand-s3c2410.h @@ -12,9 +12,10 @@ #ifndef __MTD_NAND_S3C2410_H #define __MTD_NAND_S3C2410_H +#include <linux/mtd/nand.h> + /** * struct s3c2410_nand_set - define a set of one or more nand chips - * @disable_ecc: Entirely disable ECC - Dangerous * @flash_bbt: Openmoko u-boot can create a Bad Block Table * Setting this flag will allow the kernel to * look for it at boot time and also skip the NAND @@ -31,7 +32,6 @@ * a warning at boot time. */ struct s3c2410_nand_set { - unsigned int disable_ecc:1; unsigned int flash_bbt:1; unsigned int options; @@ -40,6 +40,7 @@ struct s3c2410_nand_set { char *name; int *nr_map; struct mtd_partition *partitions; + struct device_node *of_node; }; struct s3c2410_platform_nand { @@ -51,6 +52,8 @@ struct s3c2410_platform_nand { unsigned int ignore_unset_ecc:1; + nand_ecc_modes_t ecc_mode; + int nr_sets; struct s3c2410_nand_set *sets; |