diff options
Diffstat (limited to 'include/linux/spi')
| -rw-r--r-- | include/linux/spi/mc33880.h | 10 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 51 |
2 files changed, 23 insertions, 38 deletions
diff --git a/include/linux/spi/mc33880.h b/include/linux/spi/mc33880.h new file mode 100644 index 000000000000..82ffccd6fbe5 --- /dev/null +++ b/include/linux/spi/mc33880.h @@ -0,0 +1,10 @@ +#ifndef LINUX_SPI_MC33880_H +#define LINUX_SPI_MC33880_H + +struct mc33880_platform_data { + /* number assigned to the first GPIO */ + unsigned base; +}; + +#endif + diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index c47c4b4da97e..97b60b37f445 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -20,6 +20,7 @@ #define __LINUX_SPI_H #include <linux/device.h> +#include <linux/mod_devicetable.h> /* * INTERFACES between SPI master-side drivers and SPI infrastructure. @@ -86,7 +87,7 @@ struct spi_device { int irq; void *controller_state; void *controller_data; - char modalias[32]; + char modalias[SPI_NAME_SIZE]; /* * likely need more hooks for more protocol options affecting how @@ -145,6 +146,7 @@ struct spi_message; /** * struct spi_driver - Host side "protocol" driver + * @id_table: List of SPI devices supported by this driver * @probe: Binds this driver to the spi device. Drivers can verify * that the device is actually present, and may need to configure * characteristics (such as bits_per_word) which weren't needed for @@ -170,6 +172,7 @@ struct spi_message; * MMC, RTC, filesystem character device nodes, and hardware monitoring. */ struct spi_driver { + const struct spi_device_id *id_table; int (*probe)(struct spi_device *spi); int (*remove)(struct spi_device *spi); void (*shutdown)(struct spi_device *spi); @@ -207,6 +210,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * each slave has a chipselect signal, but it's common that not * every chipselect is connected to a slave. * @dma_alignment: SPI controller constraint on DMA buffers alignment. + * @mode_bits: flags understood by this controller driver + * @flags: other constraints relevant to this driver * @setup: updates the device mode and clocking records used by a * device's SPI controller; protocol code may call this. This * must fail if an unrecognized or unsupported mode is requested. @@ -253,6 +258,8 @@ struct spi_master { /* other constraints relevant to this driver */ u16 flags; #define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */ +#define SPI_MASTER_NO_RX BIT(1) /* can't do buffer read */ +#define SPI_MASTER_NO_TX BIT(2) /* can't do buffer write */ /* Setup mode and clock, etc (spi driver may call many times). * @@ -533,42 +540,7 @@ static inline void spi_message_free(struct spi_message *m) } extern int spi_setup(struct spi_device *spi); - -/** - * spi_async - asynchronous SPI transfer - * @spi: device with which data will be exchanged - * @message: describes the data transfers, including completion callback - * Context: any (irqs may be blocked, etc) - * - * This call may be used in_irq and other contexts which can't sleep, - * as well as from task contexts which can sleep. - * - * The completion callback is invoked in a context which can't sleep. - * Before that invocation, the value of message->status is undefined. - * When the callback is issued, message->status holds either zero (to - * indicate complete success) or a negative error code. After that - * callback returns, the driver which issued the transfer request may - * deallocate the associated memory; it's no longer in use by any SPI - * core or controller driver code. - * - * Note that although all messages to a spi_device are handled in - * FIFO order, messages may go to different devices in other orders. - * Some device might be higher priority, or have various "hard" access - * time requirements, for example. - * - * On detection of any fault during the transfer, processing of - * the entire message is aborted, and the device is deselected. - * Until returning from the associated message completion callback, - * no other spi_message queued to that device will be processed. - * (This rule applies equally to all the synchronous transfer calls, - * which are wrappers around this core asynchronous primitive.) - */ -static inline int -spi_async(struct spi_device *spi, struct spi_message *message) -{ - message->spi = spi; - return spi->master->transfer(spi, message); -} +extern int spi_async(struct spi_device *spi, struct spi_message *message); /*---------------------------------------------------------------------------*/ @@ -732,7 +704,7 @@ struct spi_board_info { * controller_data goes to spi_device.controller_data, * irq is copied too */ - char modalias[32]; + char modalias[SPI_NAME_SIZE]; const void *platform_data; void *controller_data; int irq; @@ -800,4 +772,7 @@ spi_unregister_device(struct spi_device *spi) device_unregister(&spi->dev); } +extern const struct spi_device_id * +spi_get_device_id(const struct spi_device *sdev); + #endif /* __LINUX_SPI_H */ |