1 files changed, 90 insertions, 0 deletions
diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h
new file mode 100644
index 000000000000..67bbcf0785f6
--- /dev/null
+++ b/include/linux/platform_data/hsmmc-omap.h
@@ -0,0 +1,90 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * struct omap_hsmmc_dev_attr.flags possibilities
+ *
+ * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
+ *    operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
+ *    should be set if this is the case.  See for example Section 22.5.3
+ *    "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
+ *    Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
+ *
+ * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
+ *    don't work correctly on some MMC controller instances on some
+ *    OMAP3 SoCs; this flag should be set if this is the case.  See
+ *    for example Advisory 2.1.1.128 "MMC: Multiple Block Read
+ *    Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
+ *    Revision F (October 2010) (SPRZ278F).
+ */
+#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT		BIT(0)
+#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ	BIT(1)
+#define OMAP_HSMMC_SWAKEUP_MISSING		BIT(2)
+
+struct omap_hsmmc_dev_attr {
+	u8 flags;
+};
+
+struct mmc_card;
+
+struct omap_hsmmc_platform_data {
+	/* back-link to device */
+	struct device *dev;
+
+	/* set if your board has components or wiring that limits the
+	 * maximum frequency on the MMC bus */
+	unsigned int max_freq;
+
+	/* Integrating attributes from the omap_hwmod layer */
+	u8 controller_flags;
+
+	/* Register offset deviation */
+	u16 reg_offset;
+
+	/*
+	 * 4/8 wires and any additional host capabilities
+	 * need to OR'd all capabilities (ref. linux/mmc/host.h)
+	 */
+	u32 caps;	/* Used for the MMC driver on 2430 and later */
+	u32 pm_caps;	/* PM capabilities of the mmc */
+
+	/* switch pin can be for card detect (default) or card cover */
+	unsigned cover:1;
+
+	/* use the internal clock */
+	unsigned internal_clock:1;
+
+	/* nonremovable e.g. eMMC */
+	unsigned nonremovable:1;
+
+	/* eMMC does not handle power off when not in sleep state */
+	unsigned no_regulator_off_init:1;
+
+	/* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS		(1 << 0)
+#define HSMMC_HAS_UPDATED_RESET	(1 << 1)
+#define HSMMC_HAS_HSPE_SUPPORT	(1 << 2)
+	unsigned features;
+
+	int switch_pin;			/* gpio (card detect) */
+	int gpio_wp;			/* gpio (write protect) */
+
+	int (*set_power)(struct device *dev, int power_on, int vdd);
+	void (*remux)(struct device *dev, int power_on);
+	/* Call back before enabling / disabling regulators */
+	void (*before_set_reg)(struct device *dev, int power_on, int vdd);
+	/* Call back after enabling / disabling regulators */
+	void (*after_set_reg)(struct device *dev, int power_on, int vdd);
+	/* if we have special card, init it using this callback */
+	void (*init_card)(struct mmc_card *card);
+
+	const char *name;
+	u32 ocr_mask;
+};