summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/clk/clk-pwm.c7
-rw-r--r--drivers/gpu/drm/i915/display/intel_panel.c2
-rw-r--r--drivers/hwmon/pwm-fan.c2
-rw-r--r--drivers/pwm/core.c14
-rw-r--r--drivers/pwm/pwm-bcm-iproc.c12
-rw-r--r--drivers/pwm/pwm-bcm-kona.c2
-rw-r--r--drivers/pwm/pwm-clps711x.c2
-rw-r--r--drivers/pwm/pwm-imx-tpm.c2
-rw-r--r--drivers/pwm/pwm-imx27.c2
-rw-r--r--drivers/pwm/pwm-iqs620a.c15
-rw-r--r--drivers/pwm/pwm-mediatek.c1
-rw-r--r--drivers/pwm/pwm-omap-dmtimer.c4
-rw-r--r--drivers/pwm/pwm-sifive.c2
-rw-r--r--drivers/pwm/pwm-stm32-lp.c2
-rw-r--r--drivers/pwm/pwm-sun4i.c2
-rw-r--r--drivers/pwm/pwm-tiecap.c2
-rw-r--r--drivers/pwm/pwm-tiehrpwm.c2
-rw-r--r--drivers/pwm/sysfs.c8
-rw-r--r--drivers/video/backlight/pwm_bl.c3
-rw-r--r--drivers/video/fbdev/ssd1307fb.c2
20 files changed, 50 insertions, 38 deletions
diff --git a/drivers/clk/clk-pwm.c b/drivers/clk/clk-pwm.c
index 87fe0b0e01a3..86f2e2d3fc02 100644
--- a/drivers/clk/clk-pwm.c
+++ b/drivers/clk/clk-pwm.c
@@ -89,7 +89,12 @@ static int clk_pwm_probe(struct platform_device *pdev)
}
if (of_property_read_u32(node, "clock-frequency", &clk_pwm->fixed_rate))
- clk_pwm->fixed_rate = NSEC_PER_SEC / pargs.period;
+ clk_pwm->fixed_rate = div64_u64(NSEC_PER_SEC, pargs.period);
+
+ if (!clk_pwm->fixed_rate) {
+ dev_err(&pdev->dev, "fixed_rate cannot be zero\n");
+ return -EINVAL;
+ }
if (pargs.period != NSEC_PER_SEC / clk_pwm->fixed_rate &&
pargs.period != DIV_ROUND_UP(NSEC_PER_SEC, clk_pwm->fixed_rate)) {
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
index aaed9eb3b56c..bbde3b12c311 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.c
+++ b/drivers/gpu/drm/i915/display/intel_panel.c
@@ -1929,7 +1929,7 @@ static int pwm_setup_backlight(struct intel_connector *connector,
return retval;
}
- level = DIV_ROUND_UP(pwm_get_duty_cycle(panel->backlight.pwm) * 100,
+ level = DIV_ROUND_UP_ULL(pwm_get_duty_cycle(panel->backlight.pwm) * 100,
CRC_PMIC_PWM_PERIOD_NS);
panel->backlight.level =
intel_panel_compute_brightness(connector, level);
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index 30b7b3ea8836..17bb64299bfd 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -447,7 +447,7 @@ static int pwm_fan_resume(struct device *dev)
return 0;
pwm_get_args(ctx->pwm, &pargs);
- duty = DIV_ROUND_UP(ctx->pwm_value * (pargs.period - 1), MAX_PWM);
+ duty = DIV_ROUND_UP_ULL(ctx->pwm_value * (pargs.period - 1), MAX_PWM);
ret = pwm_config(ctx->pwm, duty, pargs.period);
if (ret)
return ret;
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 004b2ea9b5fd..276e939a5684 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -510,12 +510,12 @@ static void pwm_apply_state_debug(struct pwm_device *pwm,
last->period > s2.period &&
last->period <= state->period)
dev_warn(chip->dev,
- ".apply didn't pick the best available period (requested: %u, applied: %u, possible: %u)\n",
+ ".apply didn't pick the best available period (requested: %llu, applied: %llu, possible: %llu)\n",
state->period, s2.period, last->period);
if (state->enabled && state->period < s2.period)
dev_warn(chip->dev,
- ".apply is supposed to round down period (requested: %u, applied: %u)\n",
+ ".apply is supposed to round down period (requested: %llu, applied: %llu)\n",
state->period, s2.period);
if (state->enabled &&
@@ -524,14 +524,14 @@ static void pwm_apply_state_debug(struct pwm_device *pwm,
last->duty_cycle > s2.duty_cycle &&
last->duty_cycle <= state->duty_cycle)
dev_warn(chip->dev,
- ".apply didn't pick the best available duty cycle (requested: %u/%u, applied: %u/%u, possible: %u/%u)\n",
+ ".apply didn't pick the best available duty cycle (requested: %llu/%llu, applied: %llu/%llu, possible: %llu/%llu)\n",
state->duty_cycle, state->period,
s2.duty_cycle, s2.period,
last->duty_cycle, last->period);
if (state->enabled && state->duty_cycle < s2.duty_cycle)
dev_warn(chip->dev,
- ".apply is supposed to round down duty_cycle (requested: %u/%u, applied: %u/%u)\n",
+ ".apply is supposed to round down duty_cycle (requested: %llu/%llu, applied: %llu/%llu)\n",
state->duty_cycle, state->period,
s2.duty_cycle, s2.period);
@@ -558,7 +558,7 @@ static void pwm_apply_state_debug(struct pwm_device *pwm,
(s1.enabled && s1.period != last->period) ||
(s1.enabled && s1.duty_cycle != last->duty_cycle)) {
dev_err(chip->dev,
- ".apply is not idempotent (ena=%d pol=%d %u/%u) -> (ena=%d pol=%d %u/%u)\n",
+ ".apply is not idempotent (ena=%d pol=%d %llu/%llu) -> (ena=%d pol=%d %llu/%llu)\n",
s1.enabled, s1.polarity, s1.duty_cycle, s1.period,
last->enabled, last->polarity, last->duty_cycle,
last->period);
@@ -1284,8 +1284,8 @@ static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
if (state.enabled)
seq_puts(s, " enabled");
- seq_printf(s, " period: %u ns", state.period);
- seq_printf(s, " duty: %u ns", state.duty_cycle);
+ seq_printf(s, " period: %llu ns", state.period);
+ seq_printf(s, " duty: %llu ns", state.duty_cycle);
seq_printf(s, " polarity: %s",
state.polarity ? "inverse" : "normal");
diff --git a/drivers/pwm/pwm-bcm-iproc.c b/drivers/pwm/pwm-bcm-iproc.c
index 1f829edd8ee7..79b1e58e946d 100644
--- a/drivers/pwm/pwm-bcm-iproc.c
+++ b/drivers/pwm/pwm-bcm-iproc.c
@@ -85,8 +85,6 @@ static void iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
u64 tmp, multi, rate;
u32 value, prescale;
- rate = clk_get_rate(ip->clk);
-
value = readl(ip->base + IPROC_PWM_CTRL_OFFSET);
if (value & BIT(IPROC_PWM_CTRL_EN_SHIFT(pwm->hwpwm)))
@@ -99,6 +97,13 @@ static void iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
else
state->polarity = PWM_POLARITY_INVERSED;
+ rate = clk_get_rate(ip->clk);
+ if (rate == 0) {
+ state->period = 0;
+ state->duty_cycle = 0;
+ return;
+ }
+
value = readl(ip->base + IPROC_PWM_PRESCALE_OFFSET);
prescale = value >> IPROC_PWM_PRESCALE_SHIFT(pwm->hwpwm);
prescale &= IPROC_PWM_PRESCALE_MAX;
@@ -143,8 +148,7 @@ static int iproc_pwmc_apply(struct pwm_chip *chip, struct pwm_device *pwm,
value = rate * state->duty_cycle;
duty = div64_u64(value, div);
- if (period < IPROC_PWM_PERIOD_MIN ||
- duty < IPROC_PWM_DUTY_CYCLE_MIN)
+ if (period < IPROC_PWM_PERIOD_MIN)
return -EINVAL;
if (period <= IPROC_PWM_PERIOD_MAX &&
diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c
index 81da91df2529..16c5898b934a 100644
--- a/drivers/pwm/pwm-bcm-kona.c
+++ b/drivers/pwm/pwm-bcm-kona.c
@@ -138,7 +138,7 @@ static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm,
dc = div64_u64(val, div);
/* If duty_ns or period_ns are not achievable then return */
- if (pc < PERIOD_COUNT_MIN || dc < DUTY_CYCLE_HIGH_MIN)
+ if (pc < PERIOD_COUNT_MIN)
return -EINVAL;
/* If pc and dc are in bounds, the calculation is done */
diff --git a/drivers/pwm/pwm-clps711x.c b/drivers/pwm/pwm-clps711x.c
index 924d39a797cf..ba9500aca078 100644
--- a/drivers/pwm/pwm-clps711x.c
+++ b/drivers/pwm/pwm-clps711x.c
@@ -43,7 +43,7 @@ static void clps711x_pwm_update_val(struct clps711x_chip *priv, u32 n, u32 v)
static unsigned int clps711x_get_duty(struct pwm_device *pwm, unsigned int v)
{
/* Duty cycle 0..15 max */
- return DIV_ROUND_CLOSEST(v * 0xf, pwm->args.period);
+ return DIV64_U64_ROUND_CLOSEST(v * 0xf, pwm->args.period);
}
static int clps711x_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
diff --git a/drivers/pwm/pwm-imx-tpm.c b/drivers/pwm/pwm-imx-tpm.c
index 5f3d7f7e6aef..fcdf6befb838 100644
--- a/drivers/pwm/pwm-imx-tpm.c
+++ b/drivers/pwm/pwm-imx-tpm.c
@@ -124,7 +124,7 @@ static int pwm_imx_tpm_round_state(struct pwm_chip *chip,
real_state->duty_cycle = state->duty_cycle;
tmp = (u64)p->mod * real_state->duty_cycle;
- p->val = DIV_ROUND_CLOSEST_ULL(tmp, real_state->period);
+ p->val = DIV64_U64_ROUND_CLOSEST(tmp, real_state->period);
real_state->polarity = state->polarity;
real_state->enabled = state->enabled;
diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c
index 732a6f3701e8..c50d453552bd 100644
--- a/drivers/pwm/pwm-imx27.c
+++ b/drivers/pwm/pwm-imx27.c
@@ -202,7 +202,7 @@ static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip,
sr = readl(imx->mmio_base + MX3_PWMSR);
fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
- period_ms = DIV_ROUND_UP(pwm_get_period(pwm),
+ period_ms = DIV_ROUND_UP_ULL(pwm_get_period(pwm),
NSEC_PER_MSEC);
msleep(period_ms);
diff --git a/drivers/pwm/pwm-iqs620a.c b/drivers/pwm/pwm-iqs620a.c
index 674f0e238ba0..7d33e3646436 100644
--- a/drivers/pwm/pwm-iqs620a.c
+++ b/drivers/pwm/pwm-iqs620a.c
@@ -25,10 +25,10 @@
#include <linux/regmap.h>
#include <linux/slab.h>
-#define IQS620_PWR_SETTINGS 0xD2
+#define IQS620_PWR_SETTINGS 0xd2
#define IQS620_PWR_SETTINGS_PWM_OUT BIT(7)
-#define IQS620_PWM_DUTY_CYCLE 0xD8
+#define IQS620_PWM_DUTY_CYCLE 0xd8
#define IQS620_PWM_PERIOD_NS 1000000
@@ -46,7 +46,8 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
{
struct iqs620_pwm_private *iqs620_pwm;
struct iqs62x_core *iqs62x;
- int duty_scale, ret;
+ u64 duty_scale;
+ int ret;
if (state->polarity != PWM_POLARITY_NORMAL)
return -ENOTSUPP;
@@ -69,7 +70,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
* For lower duty cycles (e.g. 0), the PWM output is simply disabled to
* allow an external pull-down resistor to hold the GPIO3/LTX pin low.
*/
- duty_scale = state->duty_cycle * 256 / IQS620_PWM_PERIOD_NS;
+ duty_scale = div_u64(state->duty_cycle * 256, IQS620_PWM_PERIOD_NS);
mutex_lock(&iqs620_pwm->lock);
@@ -81,7 +82,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
}
if (duty_scale) {
- u8 duty_val = min(duty_scale - 1, 0xFF);
+ u8 duty_val = min_t(u64, duty_scale - 1, 0xff);
ret = regmap_write(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE,
duty_val);
@@ -93,7 +94,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
if (state->enabled && duty_scale) {
ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
- IQS620_PWR_SETTINGS_PWM_OUT, 0xFF);
+ IQS620_PWR_SETTINGS_PWM_OUT, 0xff);
if (ret)
goto err_mutex;
}
@@ -159,7 +160,7 @@ static int iqs620_pwm_notifier(struct notifier_block *notifier,
ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS,
IQS620_PWR_SETTINGS_PWM_OUT,
- iqs620_pwm->out_en ? 0xFF : 0);
+ iqs620_pwm->out_en ? 0xff : 0);
err_mutex:
mutex_unlock(&iqs620_pwm->lock);
diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index b94e0d09c300..ab001ce55178 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -46,6 +46,7 @@ struct pwm_mediatek_of_data {
* @clk_main: the clock used by PWM core
* @clk_pwms: the clock used by each PWM channel
* @clk_freq: the fix clock frequency of legacy MIPS SoC
+ * @soc: pointer to chip's platform data
*/
struct pwm_mediatek_chip {
struct pwm_chip chip;
diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
index 0d31833db2e2..358db4ff9d4f 100644
--- a/drivers/pwm/pwm-omap-dmtimer.c
+++ b/drivers/pwm/pwm-omap-dmtimer.c
@@ -14,7 +14,7 @@
* with a timer counter that goes up. When it overflows it gets
* reloaded with the load value and the pwm output goes up.
* When counter matches with match register, the output goes down.
- * Reference Manual: http://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
+ * Reference Manual: https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
*
* Limitations:
* - When PWM is stopped, timer counter gets stopped immediately. This
@@ -58,7 +58,7 @@
* @mutex: Mutex to protect pwm apply state
* @dm_timer: Pointer to omap dm timer.
* @pdata: Pointer to omap dm timer ops.
- * dm_timer_pdev: Pointer to omap dm timer platform device
+ * @dm_timer_pdev: Pointer to omap dm timer platform device
*/
struct pwm_omap_dmtimer_chip {
struct pwm_chip chip;
diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c
index cc63f9baa481..62de0bb85921 100644
--- a/drivers/pwm/pwm-sifive.c
+++ b/drivers/pwm/pwm-sifive.c
@@ -181,7 +181,7 @@ static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *pwm,
* consecutively
*/
num = (u64)duty_cycle * (1U << PWM_SIFIVE_CMPWIDTH);
- frac = DIV_ROUND_CLOSEST_ULL(num, state->period);
+ frac = DIV64_U64_ROUND_CLOSEST(num, state->period);
/* The hardware cannot generate a 100% duty cycle */
frac = min(frac, (1U << PWM_SIFIVE_CMPWIDTH) - 1);
diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
index 67fca62524dc..134c14621ee0 100644
--- a/drivers/pwm/pwm-stm32-lp.c
+++ b/drivers/pwm/pwm-stm32-lp.c
@@ -61,7 +61,7 @@ static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm,
do_div(div, NSEC_PER_SEC);
if (!div) {
/* Clock is too slow to achieve requested period. */
- dev_dbg(priv->chip.dev, "Can't reach %u ns\n", state->period);
+ dev_dbg(priv->chip.dev, "Can't reach %llu ns\n", state->period);
return -EINVAL;
}
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 18fbbe3277d0..961c59c99bb3 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -285,7 +285,7 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
val = (duty & PWM_DTY_MASK) | PWM_PRD(period);
sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
sun4i_pwm->next_period[pwm->hwpwm] = jiffies +
- usecs_to_jiffies(cstate.period / 1000 + 1);
+ nsecs_to_jiffies(cstate.period + 1000);
if (state->polarity != PWM_POLARITY_NORMAL)
ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index ab38c8203b79..683804c7d26c 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -2,7 +2,7 @@
/*
* ECAP PWM driver
*
- * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments, Inc. - https://www.ti.com/
*/
#include <linux/module.h>
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index 7b4c770ce9d6..0846917ff2d2 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -2,7 +2,7 @@
/*
* EHRPWM PWM driver
*
- * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments, Inc. - https://www.ti.com/
*/
#include <linux/module.h>
diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c
index 2389b8669846..449dbc0f49ed 100644
--- a/drivers/pwm/sysfs.c
+++ b/drivers/pwm/sysfs.c
@@ -42,7 +42,7 @@ static ssize_t period_show(struct device *child,
pwm_get_state(pwm, &state);
- return sprintf(buf, "%u\n", state.period);
+ return sprintf(buf, "%llu\n", state.period);
}
static ssize_t period_store(struct device *child,
@@ -52,10 +52,10 @@ static ssize_t period_store(struct device *child,
struct pwm_export *export = child_to_pwm_export(child);
struct pwm_device *pwm = export->pwm;
struct pwm_state state;
- unsigned int val;
+ u64 val;
int ret;
- ret = kstrtouint(buf, 0, &val);
+ ret = kstrtou64(buf, 0, &val);
if (ret)
return ret;
@@ -77,7 +77,7 @@ static ssize_t duty_cycle_show(struct device *child,
pwm_get_state(pwm, &state);
- return sprintf(buf, "%u\n", state.duty_cycle);
+ return sprintf(buf, "%llu\n", state.duty_cycle);
}
static ssize_t duty_cycle_store(struct device *child,
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index eff64db2e02e..dfc760830eb9 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -601,7 +601,8 @@ static int pwm_backlight_probe(struct platform_device *pdev)
pb->scale = data->max_brightness;
}
- pb->lth_brightness = data->lth_brightness * (state.period / pb->scale);
+ pb->lth_brightness = data->lth_brightness * (div_u64(state.period,
+ pb->scale));
props.type = BACKLIGHT_RAW;
props.max_brightness = data->max_brightness;
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 8e06ba912d60..09425ec317ba 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -312,7 +312,7 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
/* Enable the PWM */
pwm_enable(par->pwm);
- dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n",
+ dev_dbg(&par->client->dev, "Using PWM%d with a %lluns period.\n",
par->pwm->pwm, pwm_get_period(par->pwm));
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 10:24:06 +0300