diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/regulator/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/as3711-regulator.c | 379 |
3 files changed, 387 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 67d47b59a66d..f73d6f5ce6dd 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -450,5 +450,12 @@ config REGULATOR_WM8994 This driver provides support for the voltage regulators on the WM8994 CODEC. +config REGULATOR_AS3711 + tristate "AS3711 PMIC" + depends on MFD_AS3711 + help + This driver provides support for the voltage regulators on the + AS3711 PMIC + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index e431eed8a878..c1557ace9095 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o +obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c new file mode 100644 index 000000000000..81578bf7e352 --- /dev/null +++ b/drivers/regulator/as3711-regulator.c @@ -0,0 +1,379 @@ +/* + * AS3711 PMIC regulator driver, using DCDC Step Down and LDO supplies + * + * Copyright (C) 2012 Renesas Electronics Corporation + * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License as + * published by the Free Software Foundation + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/mfd/as3711.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/slab.h> + +struct as3711_regulator_info { + struct regulator_desc desc; + unsigned int max_uV; +}; + +struct as3711_regulator { + struct as3711_regulator_info *reg_info; + struct regulator_dev *rdev; +}; + +static int as3711_list_voltage_sd(struct regulator_dev *rdev, + unsigned int selector) +{ + if (selector >= rdev->desc->n_voltages) + return -EINVAL; + + if (!selector) + return 0; + if (selector < 0x41) + return 600000 + selector * 12500; + if (selector < 0x71) + return 1400000 + (selector - 0x40) * 25000; + return 2600000 + (selector - 0x70) * 50000; +} + +static int as3711_list_voltage_aldo(struct regulator_dev *rdev, + unsigned int selector) +{ + if (selector >= rdev->desc->n_voltages) + return -EINVAL; + + if (selector < 0x10) + return 1200000 + selector * 50000; + return 1800000 + (selector - 0x10) * 100000; +} + +static int as3711_list_voltage_dldo(struct regulator_dev *rdev, + unsigned int selector) +{ + if (selector >= rdev->desc->n_voltages || + (selector > 0x10 && selector < 0x20)) + return -EINVAL; + + if (selector < 0x11) + return 900000 + selector * 50000; + return 1750000 + (selector - 0x20) * 50000; +} + +static int as3711_bound_check(struct regulator_dev *rdev, + int *min_uV, int *max_uV) +{ + struct as3711_regulator_info *info = container_of(rdev->desc, + struct as3711_regulator_info, desc); + struct as3711_regulator *reg = rdev->reg_data; + + WARN_ON(reg->reg_info != info); + + dev_dbg(&rdev->dev, "%s(), %d, %d, %d\n", __func__, + *min_uV, rdev->desc->min_uV, info->max_uV); + + if (*max_uV < *min_uV || + *min_uV >= info->max_uV || rdev->desc->min_uV >= *max_uV) + return -EINVAL; + + if (rdev->desc->n_voltages == 1) + return 0; + + if (*max_uV > info->max_uV) + *max_uV = info->max_uV; + + if (*min_uV < rdev->desc->min_uV) + *min_uV = rdev->desc->min_uV; + + return *min_uV; +} + +static int as3711_sel_check(int min, int max, int bottom, int step) +{ + int ret, voltage; + + /* Round up min, when dividing: keeps us within the range */ + ret = (min - bottom + step - 1) / step; + voltage = ret * step + bottom; + pr_debug("%s(): select %d..%d in %d+N*%d: %d\n", __func__, + min, max, bottom, step, ret); + if (voltage > max) { + /* + * Try 1 down. It will take us below min, but as long we stay + * above bottom, we're fine. + */ + ret--; + voltage = ret * step + bottom; + if (voltage < bottom) + return -EINVAL; + } + return ret; +} + +static int as3711_map_voltage_sd(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + int ret; + + ret = as3711_bound_check(rdev, &min_uV, &max_uV); + if (ret <= 0) + return ret; + + if (min_uV <= 1400000) + return as3711_sel_check(min_uV, max_uV, 600000, 12500); + + if (min_uV <= 2600000) + return as3711_sel_check(min_uV, max_uV, 1400000, 25000) + 0x40; + + return as3711_sel_check(min_uV, max_uV, 2600000, 50000) + 0x70; +} + +/* + * The regulator API supports 4 modes of operataion: FAST, NORMAL, IDLE and + * STANDBY. We map them in the following way to AS3711 SD1-4 DCDC modes: + * FAST: sdX_fast=1 + * NORMAL: low_noise=1 + * IDLE: low_noise=0 + */ + +static int as3711_set_mode_sd(struct regulator_dev *rdev, unsigned int mode) +{ + unsigned int fast_bit = rdev->desc->enable_mask, + low_noise_bit = fast_bit << 4; + u8 val; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = fast_bit | low_noise_bit; + break; + case REGULATOR_MODE_NORMAL: + val = low_noise_bit; + break; + case REGULATOR_MODE_IDLE: + val = 0; + break; + default: + return -EINVAL; + } + + return regmap_update_bits(rdev->regmap, AS3711_SD_CONTROL_1, + low_noise_bit | fast_bit, val); +} + +static unsigned int as3711_get_mode_sd(struct regulator_dev *rdev) +{ + unsigned int fast_bit = rdev->desc->enable_mask, + low_noise_bit = fast_bit << 4, mask = fast_bit | low_noise_bit; + unsigned int val; + int ret = regmap_read(rdev->regmap, AS3711_SD_CONTROL_1, &val); + + if (ret < 0) + return ret; + + if ((val & mask) == mask) + return REGULATOR_MODE_FAST; + + if ((val & mask) == low_noise_bit) + return REGULATOR_MODE_NORMAL; + + if (!(val & mask)) + return REGULATOR_MODE_IDLE; + + return -EINVAL; +} + +static int as3711_map_voltage_aldo(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + int ret; + + ret = as3711_bound_check(rdev, &min_uV, &max_uV); + if (ret <= 0) + return ret; + + if (min_uV <= 1800000) + return as3711_sel_check(min_uV, max_uV, 1200000, 50000); + + return as3711_sel_check(min_uV, max_uV, 1800000, 100000) + 0x10; +} + +static int as3711_map_voltage_dldo(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + int ret; + + ret = as3711_bound_check(rdev, &min_uV, &max_uV); + if (ret <= 0) + return ret; + + if (min_uV <= 1700000) + return as3711_sel_check(min_uV, max_uV, 900000, 50000); + + return as3711_sel_check(min_uV, max_uV, 1750000, 50000) + 0x20; +} + +static struct regulator_ops as3711_sd_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = as3711_list_voltage_sd, + .map_voltage = as3711_map_voltage_sd, + .get_mode = as3711_get_mode_sd, + .set_mode = as3711_set_mode_sd, +}; + +static struct regulator_ops as3711_aldo_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = as3711_list_voltage_aldo, + .map_voltage = as3711_map_voltage_aldo, +}; + +static struct regulator_ops as3711_dldo_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = as3711_list_voltage_dldo, + .map_voltage = as3711_map_voltage_dldo, +}; + +#define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _vshift, _min_uV, _max_uV, _sfx) \ + [AS3711_REGULATOR_ ## _id] = { \ + .desc = { \ + .name = "as3711-regulator-" # _id, \ + .id = AS3711_REGULATOR_ ## _id, \ + .n_voltages = (_vmask + 1), \ + .ops = &as3711_ ## _sfx ## _ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .vsel_reg = AS3711_ ## _id ## _VOLTAGE, \ + .vsel_mask = _vmask << _vshift, \ + .enable_reg = AS3711_ ## _en_reg, \ + .enable_mask = BIT(_en_bit), \ + .min_uV = _min_uV, \ + }, \ + .max_uV = _max_uV, \ +} + +static struct as3711_regulator_info as3711_reg_info[] = { + AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, 0, 612500, 3350000, sd), + AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, 0, 612500, 3350000, sd), + AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, 0, 612500, 3350000, sd), + AS3711_REG(SD_4, SD_CONTROL, 3, 0x7f, 0, 612500, 3350000, sd), + AS3711_REG(LDO_1, LDO_1_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo), + AS3711_REG(LDO_2, LDO_2_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo), + AS3711_REG(LDO_3, LDO_3_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), + AS3711_REG(LDO_4, LDO_4_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), + AS3711_REG(LDO_5, LDO_5_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), + AS3711_REG(LDO_6, LDO_6_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), + AS3711_REG(LDO_7, LDO_7_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), + AS3711_REG(LDO_8, LDO_8_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), + /* StepUp output voltage depends on supplying regulator */ +}; + +#define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_info) + +static int as3711_regulator_probe(struct platform_device *pdev) +{ + struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev); + struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent); + struct regulator_init_data *reg_data; + struct regulator_config config = {.dev = &pdev->dev,}; + struct as3711_regulator *reg = NULL; + struct as3711_regulator *regs; + struct regulator_dev *rdev; + struct as3711_regulator_info *ri; + int ret; + int id; + + if (!pdata) + dev_dbg(&pdev->dev, "No platform data...\n"); + + regs = devm_kzalloc(&pdev->dev, AS3711_REGULATOR_NUM * + sizeof(struct as3711_regulator), GFP_KERNEL); + if (!regs) { + dev_err(&pdev->dev, "Memory allocation failed exiting..\n"); + return -ENOMEM; + } + + for (id = 0, ri = as3711_reg_info; id < AS3711_REGULATOR_NUM; ++id, ri++) { + reg_data = pdata ? pdata->init_data[id] : NULL; + + /* No need to register if there is no regulator data */ + if (!ri->desc.name) + continue; + + reg = ®s[id]; + reg->reg_info = ri; + + config.init_data = reg_data; + config.driver_data = reg; + config.regmap = as3711->regmap; + + rdev = regulator_register(&ri->desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "Failed to register regulator %s\n", + ri->desc.name); + ret = PTR_ERR(rdev); + goto eregreg; + } + reg->rdev = rdev; + } + platform_set_drvdata(pdev, regs); + return 0; + +eregreg: + while (--id >= 0) + regulator_unregister(regs[id].rdev); + + return ret; +} + +static int as3711_regulator_remove(struct platform_device *pdev) +{ + struct as3711_regulator *regs = platform_get_drvdata(pdev); + int id; + + for (id = 0; id < AS3711_REGULATOR_NUM; ++id) + regulator_unregister(regs[id].rdev); + return 0; +} + +static struct platform_driver as3711_regulator_driver = { + .driver = { + .name = "as3711-regulator", + .owner = THIS_MODULE, + }, + .probe = as3711_regulator_probe, + .remove = as3711_regulator_remove, +}; + +static int __init as3711_regulator_init(void) +{ + return platform_driver_register(&as3711_regulator_driver); +} +subsys_initcall(as3711_regulator_init); + +static void __exit as3711_regulator_exit(void) +{ + platform_driver_unregister(&as3711_regulator_driver); +} +module_exit(as3711_regulator_exit); + +MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); +MODULE_DESCRIPTION("AS3711 regulator driver"); +MODULE_ALIAS("platform:as3711-regulator"); +MODULE_LICENSE("GPL v2"); |