diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/spi/spi-tegra114.c | 22 | ||||
| -rw-r--r-- | drivers/spi/spi.c | 16 |
2 files changed, 30 insertions, 8 deletions
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index 8133dc49d34f..e6a450d9b4f0 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -723,15 +723,31 @@ static void tegra_spi_deinit_dma_param(struct tegra_spi_data *tspi, dma_release_channel(dma_chan); } -static void tegra_spi_set_hw_cs_timing(struct spi_device *spi, u8 setup_dly, - u8 hold_dly, u8 inactive_dly) +static int tegra_spi_set_hw_cs_timing(struct spi_device *spi, + struct spi_delay *setup, + struct spi_delay *hold, + struct spi_delay *inactive) { struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master); + u8 setup_dly, hold_dly, inactive_dly; u32 setup_hold; u32 spi_cs_timing; u32 inactive_cycles; u8 cs_state; + if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) || + (hold && hold->unit != SPI_DELAY_UNIT_SCK) || + (inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) { + dev_err(&spi->dev, + "Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n", + SPI_DELAY_UNIT_SCK); + return -EINVAL; + } + + setup_dly = setup ? setup->value : 0; + hold_dly = hold ? hold->value : 0; + inactive_dly = inactive ? inactive->value : 0; + setup_dly = min_t(u8, setup_dly, MAX_SETUP_HOLD_CYCLES); hold_dly = min_t(u8, hold_dly, MAX_SETUP_HOLD_CYCLES); if (setup_dly && hold_dly) { @@ -758,6 +774,8 @@ static void tegra_spi_set_hw_cs_timing(struct spi_device *spi, u8 setup_dly, tspi->spi_cs_timing2 = spi_cs_timing; tegra_spi_writel(tspi, spi_cs_timing, SPI_CS_TIMING2); } + + return 0; } static u32 tegra_spi_setup_transfer_one(struct spi_device *spi, diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 2e448078a117..6beeb363515c 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -3269,15 +3269,19 @@ EXPORT_SYMBOL_GPL(spi_setup); /** * spi_set_cs_timing - configure CS setup, hold, and inactive delays * @spi: the device that requires specific CS timing configuration - * @setup: CS setup time in terms of clock count - * @hold: CS hold time in terms of clock count - * @inactive_dly: CS inactive delay between transfers in terms of clock count + * @setup: CS setup time specified via @spi_delay + * @hold: CS hold time specified via @spi_delay + * @inactive: CS inactive delay between transfers specified via @spi_delay + * + * Return: zero on success, else a negative error code. */ -void spi_set_cs_timing(struct spi_device *spi, u8 setup, u8 hold, - u8 inactive_dly) +int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup, + struct spi_delay *hold, struct spi_delay *inactive) { if (spi->controller->set_cs_timing) - spi->controller->set_cs_timing(spi, setup, hold, inactive_dly); + return spi->controller->set_cs_timing(spi, setup, hold, + inactive); + return -ENOTSUPP; } EXPORT_SYMBOL_GPL(spi_set_cs_timing); |