summaryrefslogtreecommitdiff
path: root/drivers/usb/musb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r--drivers/usb/musb/Kconfig2
-rw-r--r--drivers/usb/musb/blackfin.c11
-rw-r--r--drivers/usb/musb/cppi_dma.c34
-rw-r--r--drivers/usb/musb/cppi_dma.h6
-rw-r--r--drivers/usb/musb/davinci.c54
-rw-r--r--drivers/usb/musb/musb_core.c228
-rw-r--r--drivers/usb/musb/musb_core.h22
-rw-r--r--drivers/usb/musb/musb_gadget.c45
-rw-r--r--drivers/usb/musb/musb_gadget_ep0.c45
-rw-r--r--drivers/usb/musb/musb_host.c273
-rw-r--r--drivers/usb/musb/musb_host.h1
-rw-r--r--drivers/usb/musb/musb_virthub.c35
-rw-r--r--drivers/usb/musb/omap2430.c71
-rw-r--r--drivers/usb/musb/tusb6010.c70
14 files changed, 484 insertions, 413 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index b66e8544d8b9..70073b157f0a 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -10,6 +10,7 @@ comment "Enable Host or Gadget support to see Inventra options"
config USB_MUSB_HDRC
depends on (USB || USB_GADGET) && HAVE_CLK
depends on !SUPERH
+ select NOP_USB_XCEIV if ARCH_DAVINCI
select TWL4030_USB if MACH_OMAP_3430SDP
select USB_OTG_UTILS
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
@@ -55,6 +56,7 @@ comment "Blackfin high speed USB Support"
config USB_TUSB6010
boolean "TUSB 6010 support"
depends on USB_MUSB_HDRC && !USB_MUSB_SOC
+ select NOP_USB_XCEIV
default y
help
The TUSB 6010 chip, from Texas Instruments, connects a discrete
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 786134852092..f2f66ebc7362 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -143,7 +143,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
u16 val;
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_IDLE:
case OTG_STATE_A_WAIT_BCON:
/* Start a new session */
@@ -154,7 +154,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
val = musb_readw(musb->mregs, MUSB_DEVCTL);
if (!(val & MUSB_DEVCTL_BDEVICE)) {
gpio_set_value(musb->config->gpio_vrsel, 1);
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
} else {
gpio_set_value(musb->config->gpio_vrsel, 0);
@@ -247,6 +247,11 @@ int __init musb_platform_init(struct musb *musb)
}
gpio_direction_output(musb->config->gpio_vrsel, 0);
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv)
+ return -ENODEV;
+
if (ANOMALY_05000346) {
bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
SSYNC();
@@ -291,7 +296,7 @@ int __init musb_platform_init(struct musb *musb)
musb_conn_timer_handler, (unsigned long) musb);
}
if (is_peripheral_enabled(musb))
- musb->xceiv.set_power = bfin_set_power;
+ musb->xceiv->set_power = bfin_set_power;
musb->isr = blackfin_interrupt;
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 1976e9b41800..c3577bbbae6c 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -6,6 +6,7 @@
* The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci.
*/
+#include <linux/platform_device.h>
#include <linux/usb.h>
#include "musb_core.h"
@@ -1145,17 +1146,27 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
return completed;
}
-void cppi_completion(struct musb *musb, u32 rx, u32 tx)
+irqreturn_t cppi_interrupt(int irq, void *dev_id)
{
- void __iomem *tibase;
- int i, index;
+ struct musb *musb = dev_id;
struct cppi *cppi;
+ void __iomem *tibase;
struct musb_hw_ep *hw_ep = NULL;
+ u32 rx, tx;
+ int i, index;
cppi = container_of(musb->dma_controller, struct cppi, controller);
tibase = musb->ctrl_base;
+ tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
+ rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
+
+ if (!tx && !rx)
+ return IRQ_NONE;
+
+ DBG(4, "CPPI IRQ Tx%x Rx%x\n", tx, rx);
+
/* process TX channels */
for (index = 0; tx; tx = tx >> 1, index++) {
struct cppi_channel *tx_ch;
@@ -1273,6 +1284,8 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx)
/* write to CPPI EOI register to re-enable interrupts */
musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
+
+ return IRQ_HANDLED;
}
/* Instantiate a software object representing a DMA controller. */
@@ -1280,6 +1293,9 @@ struct dma_controller *__init
dma_controller_create(struct musb *musb, void __iomem *mregs)
{
struct cppi *controller;
+ struct device *dev = musb->controller;
+ struct platform_device *pdev = to_platform_device(dev);
+ int irq = platform_get_irq(pdev, 1);
controller = kzalloc(sizeof *controller, GFP_KERNEL);
if (!controller)
@@ -1310,6 +1326,15 @@ dma_controller_create(struct musb *musb, void __iomem *mregs)
return NULL;
}
+ if (irq > 0) {
+ if (request_irq(irq, cppi_interrupt, 0, "cppi-dma", musb)) {
+ dev_err(dev, "request_irq %d failed!\n", irq);
+ dma_controller_destroy(&controller->controller);
+ return NULL;
+ }
+ controller->irq = irq;
+ }
+
return &controller->controller;
}
@@ -1322,6 +1347,9 @@ void dma_controller_destroy(struct dma_controller *c)
cppi = container_of(c, struct cppi, controller);
+ if (cppi->irq)
+ free_irq(cppi->irq, cppi->musb);
+
/* assert: caller stopped the controller first */
dma_pool_destroy(cppi->pool);
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
index 729b4071787b..8a39de3e6e47 100644
--- a/drivers/usb/musb/cppi_dma.h
+++ b/drivers/usb/musb/cppi_dma.h
@@ -119,6 +119,8 @@ struct cppi {
void __iomem *mregs; /* Mentor regs */
void __iomem *tibase; /* TI/CPPI regs */
+ int irq;
+
struct cppi_channel tx[4];
struct cppi_channel rx[4];
@@ -127,7 +129,7 @@ struct cppi {
struct list_head tx_complete;
};
-/* irq handling hook */
-extern void cppi_completion(struct musb *, u32 rx, u32 tx);
+/* CPPI IRQ handler */
+extern irqreturn_t cppi_interrupt(int, void *);
#endif /* end of ifndef _CPPI_DMA_H_ */
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 10d11ab113ab..180d7daa4099 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -215,7 +215,7 @@ static void otg_timer(unsigned long _musb)
DBG(7, "poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_VFALL:
/* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
* seems to mis-handle session "start" otherwise (or in our
@@ -226,7 +226,7 @@ static void otg_timer(unsigned long _musb)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
break;
}
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
break;
@@ -251,7 +251,7 @@ static void otg_timer(unsigned long _musb)
if (devctl & MUSB_DEVCTL_BDEVICE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
else
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
break;
default:
break;
@@ -265,6 +265,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
irqreturn_t retval = IRQ_NONE;
struct musb *musb = __hci;
void __iomem *tibase = musb->ctrl_base;
+ struct cppi *cppi;
u32 tmp;
spin_lock_irqsave(&musb->lock, flags);
@@ -281,16 +282,9 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
/* CPPI interrupts share the same IRQ line, but have their own
* mask, state, "vector", and EOI registers.
*/
- if (is_cppi_enabled()) {
- u32 cppi_tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
- u32 cppi_rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
-
- if (cppi_tx || cppi_rx) {
- DBG(4, "CPPI IRQ t%x r%x\n", cppi_tx, cppi_rx);
- cppi_completion(musb, cppi_rx, cppi_tx);
- retval = IRQ_HANDLED;
- }
- }
+ cppi = container_of(musb->dma_controller, struct cppi, controller);
+ if (is_cppi_enabled() && musb->dma_controller && !cppi->irq)
+ retval = cppi_interrupt(irq, __hci);
/* ack and handle non-CPPI interrupts */
tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG);
@@ -331,21 +325,21 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
* to stop registering in devctl.
*/
musb->int_usb &= ~MUSB_INTR_VBUSERROR;
- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (is_host_enabled(musb) && drvvbus) {
musb->is_active = 1;
MUSB_HST_MODE(musb);
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&otg_workaround);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
@@ -367,17 +361,12 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
/* poll for ID change */
if (is_otg_enabled(musb)
- && musb->xceiv.state == OTG_STATE_B_IDLE)
+ && musb->xceiv->state == OTG_STATE_B_IDLE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
spin_unlock_irqrestore(&musb->lock, flags);
- /* REVISIT we sometimes get unhandled IRQs
- * (e.g. ep0). not clear why...
- */
- if (retval != IRQ_HANDLED)
- DBG(5, "unhandled? %08x\n", tmp);
- return IRQ_HANDLED;
+ return retval;
}
int musb_platform_set_mode(struct musb *musb, u8 mode)
@@ -391,6 +380,11 @@ int __init musb_platform_init(struct musb *musb)
void __iomem *tibase = musb->ctrl_base;
u32 revision;
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv)
+ return -ENODEV;
+
musb->mregs += DAVINCI_BASE_OFFSET;
clk_enable(musb->clock);
@@ -398,7 +392,7 @@ int __init musb_platform_init(struct musb *musb)
/* returns zero if e.g. not clocked */
revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
if (revision == 0)
- return -ENODEV;
+ goto fail;
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
@@ -432,6 +426,10 @@ int __init musb_platform_init(struct musb *musb)
musb->isr = davinci_interrupt;
return 0;
+
+fail:
+ usb_nop_xceiv_unregister();
+ return -ENODEV;
}
int musb_platform_exit(struct musb *musb)
@@ -442,7 +440,7 @@ int musb_platform_exit(struct musb *musb)
davinci_source_power(musb, 0 /*off*/, 1);
/* delay, to avoid problems with module reload */
- if (is_host_enabled(musb) && musb->xceiv.default_a) {
+ if (is_host_enabled(musb) && musb->xceiv->default_a) {
int maxdelay = 30;
u8 devctl, warn = 0;
@@ -471,5 +469,7 @@ int musb_platform_exit(struct musb *musb)
clk_disable(musb->clock);
+ usb_nop_xceiv_unregister();
+
return 0;
}
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4000cf6d1e81..554a414f65d1 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -112,6 +112,7 @@
#include "davinci.h"
#endif
+#define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
unsigned musb_debug;
@@ -267,7 +268,7 @@ void musb_load_testpacket(struct musb *musb)
const char *otg_state_string(struct musb *musb)
{
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_IDLE: return "a_idle";
case OTG_STATE_A_WAIT_VRISE: return "a_wait_vrise";
case OTG_STATE_A_WAIT_BCON: return "a_wait_bcon";
@@ -288,12 +289,6 @@ const char *otg_state_string(struct musb *musb)
#ifdef CONFIG_USB_MUSB_OTG
/*
- * See also USB_OTG_1-3.pdf 6.6.5 Timers
- * REVISIT: Are the other timers done in the hardware?
- */
-#define TB_ASE0_BRST 100 /* Min 3.125 ms */
-
-/*
* Handles OTG hnp timeouts, such as b_ase0_brst
*/
void musb_otg_timer_func(unsigned long data)
@@ -302,16 +297,18 @@ void musb_otg_timer_func(unsigned long data)
unsigned long flags;
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_WAIT_ACON:
DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n");
musb_g_disconnect(musb);
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb->is_active = 0;
break;
+ case OTG_STATE_A_SUSPEND:
case OTG_STATE_A_WAIT_BCON:
- DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n");
- musb_hnp_stop(musb);
+ DBG(1, "HNP: %s timeout\n", otg_state_string(musb));
+ musb_set_vbus(musb, 0);
+ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
break;
default:
DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb));
@@ -320,10 +317,8 @@ void musb_otg_timer_func(unsigned long data)
spin_unlock_irqrestore(&musb->lock, flags);
}
-static DEFINE_TIMER(musb_otg_timer, musb_otg_timer_func, 0, 0);
-
/*
- * Stops the B-device HNP state. Caller must take care of locking.
+ * Stops the HNP transition. Caller must take care of locking.
*/
void musb_hnp_stop(struct musb *musb)
{
@@ -331,20 +326,17 @@ void musb_hnp_stop(struct musb *musb)
void __iomem *mbase = musb->mregs;
u8 reg;
- switch (musb->xceiv.state) {
+ DBG(1, "HNP: stop from %s\n", otg_state_string(musb));
+
+ switch (musb->xceiv->state) {
case OTG_STATE_A_PERIPHERAL:
- case OTG_STATE_A_WAIT_VFALL:
- case OTG_STATE_A_WAIT_BCON:
- DBG(1, "HNP: Switching back to A-host\n");
musb_g_disconnect(musb);
- musb->xceiv.state = OTG_STATE_A_IDLE;
- MUSB_HST_MODE(musb);
- musb->is_active = 0;
+ DBG(1, "HNP: back to %s\n", otg_state_string(musb));
break;
case OTG_STATE_B_HOST:
DBG(1, "HNP: Disabling HR\n");
hcd->self.is_b_host = 0;
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
MUSB_DEV_MODE(musb);
reg = musb_readb(mbase, MUSB_POWER);
reg |= MUSB_POWER_SUSPENDM;
@@ -402,7 +394,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
if (devctl & MUSB_DEVCTL_HM) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_SUSPEND:
/* remote wakeup? later, GetPortStatus
* will stop RESUME signaling
@@ -425,12 +417,12 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
musb->rh_timer = jiffies
+ msecs_to_jiffies(20);
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
musb->is_active = 1;
usb_hcd_resume_root_hub(musb_to_hcd(musb));
break;
case OTG_STATE_B_WAIT_ACON:
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb->is_active = 1;
MUSB_DEV_MODE(musb);
break;
@@ -441,11 +433,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
}
#endif
} else {
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case OTG_STATE_A_SUSPEND:
/* possibly DISCONNECT is upcoming */
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
usb_hcd_resume_root_hub(musb_to_hcd(musb));
break;
#endif
@@ -490,7 +482,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
*/
musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
musb->ep0_stage = MUSB_EP0_START;
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
musb_set_vbus(musb, 1);
@@ -516,7 +508,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
* REVISIT: do delays from lots of DEBUG_KERNEL checks
* make trouble here, keeping VBUS < 4.4V ?
*/
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_HOST:
/* recovery is dicey once we've gotten past the
* initial stages of enumeration, but if VBUS
@@ -594,37 +586,40 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
if (devctl & MUSB_DEVCTL_LSDEV)
musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
- if (hcd->status_urb)
- usb_hcd_poll_rh_status(hcd);
- else
- usb_hcd_resume_root_hub(hcd);
-
- MUSB_HST_MODE(musb);
-
/* indicate new connection to OTG machine */
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_PERIPHERAL:
if (int_usb & MUSB_INTR_SUSPEND) {
DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n");
- musb->xceiv.state = OTG_STATE_B_HOST;
- hcd->self.is_b_host = 1;
int_usb &= ~MUSB_INTR_SUSPEND;
+ goto b_host;
} else
DBG(1, "CONNECT as b_peripheral???\n");
break;
case OTG_STATE_B_WAIT_ACON:
- DBG(1, "HNP: Waiting to switch to b_host state\n");
- musb->xceiv.state = OTG_STATE_B_HOST;
+ DBG(1, "HNP: CONNECT, now b_host\n");
+b_host:
+ musb->xceiv->state = OTG_STATE_B_HOST;
hcd->self.is_b_host = 1;
+ musb->ignore_disconnect = 0;
+ del_timer(&musb->otg_timer);
break;
default:
if ((devctl & MUSB_DEVCTL_VBUS)
== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
hcd->self.is_b_host = 0;
}
break;
}
+
+ /* poke the root hub */
+ MUSB_HST_MODE(musb);
+ if (hcd->status_urb)
+ usb_hcd_poll_rh_status(hcd);
+ else
+ usb_hcd_resume_root_hub(hcd);
+
DBG(1, "CONNECT (%s) devctl %02x\n",
otg_state_string(musb), devctl);
}
@@ -650,7 +645,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
}
} else if (is_peripheral_capable()) {
DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_OTG
case OTG_STATE_A_SUSPEND:
/* We need to ignore disconnect on suspend
@@ -661,24 +656,27 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
musb_g_reset(musb);
/* FALLTHROUGH */
case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */
- DBG(1, "HNP: Setting timer as %s\n",
- otg_state_string(musb));
- musb_otg_timer.data = (unsigned long)musb;
- mod_timer(&musb_otg_timer, jiffies
- + msecs_to_jiffies(100));
+ /* never use invalid T(a_wait_bcon) */
+ DBG(1, "HNP: in %s, %d msec timeout\n",
+ otg_state_string(musb),
+ TA_WAIT_BCON(musb));
+ mod_timer(&musb->otg_timer, jiffies
+ + msecs_to_jiffies(TA_WAIT_BCON(musb)));
break;
case OTG_STATE_A_PERIPHERAL:
- musb_hnp_stop(musb);
+ musb->ignore_disconnect = 0;
+ del_timer(&musb->otg_timer);
+ musb_g_reset(musb);
break;
case OTG_STATE_B_WAIT_ACON:
DBG(1, "HNP: RESET (%s), to b_peripheral\n",
otg_state_string(musb));
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb_g_reset(musb);
break;
#endif
case OTG_STATE_B_IDLE:
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
/* FALLTHROUGH */
case OTG_STATE_B_PERIPHERAL:
musb_g_reset(musb);
@@ -763,7 +761,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
MUSB_MODE(musb), devctl);
handled = IRQ_HANDLED;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case OTG_STATE_A_HOST:
case OTG_STATE_A_SUSPEND:
@@ -776,7 +774,16 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
#endif /* HOST */
#ifdef CONFIG_USB_MUSB_OTG
case OTG_STATE_B_HOST:
- musb_hnp_stop(musb);
+ /* REVISIT this behaves for "real disconnect"
+ * cases; make sure the other transitions from
+ * from B_HOST act right too. The B_HOST code
+ * in hnp_stop() is currently not used...
+ */
+ musb_root_disconnect(musb);
+ musb_to_hcd(musb)->self.is_b_host = 0;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ MUSB_DEV_MODE(musb);
+ musb_g_disconnect(musb);
break;
case OTG_STATE_A_PERIPHERAL:
musb_hnp_stop(musb);
@@ -805,26 +812,35 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
otg_state_string(musb), devctl, power);
handled = IRQ_HANDLED;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
#ifdef CONFIG_USB_MUSB_OTG
case OTG_STATE_A_PERIPHERAL:
- /*
- * We cannot stop HNP here, devctl BDEVICE might be
- * still set.
+ /* We also come here if the cable is removed, since
+ * this silicon doesn't report ID-no-longer-grounded.
+ *
+ * We depend on T(a_wait_bcon) to shut us down, and
+ * hope users don't do anything dicey during this
+ * undesired detour through A_WAIT_BCON.
*/
+ musb_hnp_stop(musb);
+ usb_hcd_resume_root_hub(musb_to_hcd(musb));
+ musb_root_disconnect(musb);
+ musb_platform_try_idle(musb, jiffies
+ + msecs_to_jiffies(musb->a_wait_bcon
+ ? : OTG_TIME_A_WAIT_BCON));
break;
#endif
case OTG_STATE_B_PERIPHERAL:
musb_g_suspend(musb);
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.gadget->b_hnp_enable;
+ && musb->xceiv->gadget->b_hnp_enable;
if (musb->is_active) {
#ifdef CONFIG_USB_MUSB_OTG
- musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+ musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
DBG(1, "HNP: Setting timer for b_ase0_brst\n");
- musb_otg_timer.data = (unsigned long)musb;
- mod_timer(&musb_otg_timer, jiffies
- + msecs_to_jiffies(TB_ASE0_BRST));
+ mod_timer(&musb->otg_timer, jiffies
+ + msecs_to_jiffies(
+ OTG_TIME_B_ASE0_BRST));
#endif
}
break;
@@ -834,9 +850,9 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
+ msecs_to_jiffies(musb->a_wait_bcon));
break;
case OTG_STATE_A_HOST:
- musb->xceiv.state = OTG_STATE_A_SUSPEND;
+ musb->xceiv->state = OTG_STATE_A_SUSPEND;
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.host->b_hnp_enable;
+ && musb->xceiv->host->b_hnp_enable;
break;
case OTG_STATE_B_HOST:
/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
@@ -1068,14 +1084,13 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, },
{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, },
{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 13, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 13, .style = FIFO_RX, .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 256, },
+{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, },
+{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, },
+{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 64, },
+{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, },
+{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 64, },
+{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, },
{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
};
@@ -1335,11 +1350,11 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
}
if (reg & MUSB_CONFIGDATA_HBRXE) {
strcat(aInfo, ", HB-ISO Rx");
- strcat(aInfo, " (X)"); /* no driver support */
+ musb->hb_iso_rx = true;
}
if (reg & MUSB_CONFIGDATA_HBTXE) {
strcat(aInfo, ", HB-ISO Tx");
- strcat(aInfo, " (X)"); /* no driver support */
+ musb->hb_iso_tx = true;
}
if (reg & MUSB_CONFIGDATA_SOFTCONE)
strcat(aInfo, ", SoftConn");
@@ -1481,13 +1496,7 @@ static irqreturn_t generic_interrupt(int irq, void *__hci)
spin_unlock_irqrestore(&musb->lock, flags);
- /* REVISIT we sometimes get spurious IRQs on g_ep0
- * not clear why...
- */
- if (retval != IRQ_HANDLED)
- DBG(5, "spurious?\n");
-
- return IRQ_HANDLED;
+ return retval;
}
#else
@@ -1687,8 +1696,9 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr,
}
spin_lock_irqsave(&musb->lock, flags);
- musb->a_wait_bcon = val;
- if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON)
+ /* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
+ musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
+ if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON)
musb->is_active = 0;
musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
spin_unlock_irqrestore(&musb->lock, flags);
@@ -1706,10 +1716,13 @@ musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
spin_lock_irqsave(&musb->lock, flags);
val = musb->a_wait_bcon;
+ /* FIXME get_vbus_status() is normally #defined as false...
+ * and is effectively TUSB-specific.
+ */
vbus = musb_platform_get_vbus_status(musb);
spin_unlock_irqrestore(&musb->lock, flags);
- return sprintf(buf, "Vbus %s, timeout %lu\n",
+ return sprintf(buf, "Vbus %s, timeout %lu msec\n",
vbus ? "on" : "off", val);
}
static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
@@ -1749,8 +1762,8 @@ static void musb_irq_work(struct work_struct *data)
struct musb *musb = container_of(data, struct musb, irq_work);
static int old_state;
- if (musb->xceiv.state != old_state) {
- old_state = musb->xceiv.state;
+ if (musb->xceiv->state != old_state) {
+ old_state = musb->xceiv->state;
sysfs_notify(&musb->controller->kobj, NULL, "mode");
}
}
@@ -1782,6 +1795,7 @@ allocate_instance(struct device *dev,
hcd->uses_new_polling = 1;
musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+ musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
#else
musb = kzalloc(sizeof *musb, GFP_KERNEL);
if (!musb)
@@ -1847,7 +1861,7 @@ static void musb_free(struct musb *musb)
}
#ifdef CONFIG_USB_MUSB_OTG
- put_device(musb->xceiv.dev);
+ put_device(musb->xceiv->dev);
#endif
#ifdef CONFIG_USB_MUSB_HDRC_HCD
@@ -1928,10 +1942,18 @@ bad_config:
}
}
- /* assume vbus is off */
-
- /* platform adjusts musb->mregs and musb->isr if needed,
- * and activates clocks
+ /* The musb_platform_init() call:
+ * - adjusts musb->mregs and musb->isr if needed,
+ * - may initialize an integrated tranceiver
+ * - initializes musb->xceiv, usually by otg_get_transceiver()
+ * - activates clocks.
+ * - stops powering VBUS
+ * - assigns musb->board_set_vbus if host mode is enabled
+ *
+ * There are various transciever configurations. Blackfin,
+ * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
+ * external/discrete ones in various flavors (twl4030 family,
+ * isp1504, non-OTG, etc) mostly hooking up through ULPI.
*/
musb->isr = generic_interrupt;
status = musb_platform_init(musb);
@@ -1968,6 +1990,10 @@ bad_config:
if (status < 0)
goto fail2;
+#ifdef CONFIG_USB_OTG
+ setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
+#endif
+
/* Init IRQ workqueue before request_irq */
INIT_WORK(&musb->irq_work, musb_irq_work);
@@ -1999,17 +2025,17 @@ bad_config:
? "DMA" : "PIO",
musb->nIrq);
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- /* host side needs more setup, except for no-host modes */
- if (musb->board_mode != MUSB_PERIPHERAL) {
+ /* host side needs more setup */
+ if (is_host_enabled(musb)) {
struct usb_hcd *hcd = musb_to_hcd(musb);
- if (musb->board_mode == MUSB_OTG)
+ otg_set_host(musb->xceiv, &hcd->self);
+
+ if (is_otg_enabled(musb))
hcd->self.otg_port = 1;
- musb->xceiv.host = &hcd->self;
+ musb->xceiv->host = &hcd->self;
hcd->power_budget = 2 * (plat->power ? : 250);
}
-#endif /* CONFIG_USB_MUSB_HDRC_HCD */
/* For the host-only role, we can activate right away.
* (We expect the ID pin to be forcibly grounded!!)
@@ -2017,8 +2043,8 @@ bad_config:
*/
if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
MUSB_HST_MODE(musb);
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
if (status)
@@ -2033,8 +2059,8 @@ bad_config:
} else /* peripheral is enabled */ {
MUSB_DEV_MODE(musb);
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
status = musb_gadget_setup(musb);
if (status)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index efb39b5e55b5..f3772ca3b2cf 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -40,6 +40,7 @@
#include <linux/interrupt.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
+#include <linux/timer.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/usb/ch9.h>
@@ -171,7 +172,8 @@ enum musb_h_ep0_state {
/* peripheral side ep0 states */
enum musb_g_ep0_state {
- MUSB_EP0_STAGE_SETUP, /* idle, waiting for setup */
+ MUSB_EP0_STAGE_IDLE, /* idle, waiting for SETUP */
+ MUSB_EP0_STAGE_SETUP, /* received SETUP */
MUSB_EP0_STAGE_TX, /* IN data */
MUSB_EP0_STAGE_RX, /* OUT data */
MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */
@@ -179,10 +181,15 @@ enum musb_g_ep0_state {
MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */
} __attribute__ ((packed));
-/* OTG protocol constants */
+/*
+ * OTG protocol constants. See USB OTG 1.3 spec,
+ * sections 5.5 "Device Timings" and 6.6.5 "Timers".
+ */
#define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */
-#define OTG_TIME_A_WAIT_BCON 0 /* 0=infinite; min 1000 msec */
-#define OTG_TIME_A_IDLE_BDIS 200 /* msec (min) */
+#define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */
+#define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */
+#define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */
+
/*************************** REGISTER ACCESS ********************************/
@@ -331,6 +338,8 @@ struct musb {
struct list_head control; /* of musb_qh */
struct list_head in_bulk; /* of musb_qh */
struct list_head out_bulk; /* of musb_qh */
+
+ struct timer_list otg_timer;
#endif
/* called with IRQs blocked; ON/nonzero implies starting a session,
@@ -355,7 +364,7 @@ struct musb {
u16 int_rx;
u16 int_tx;
- struct otg_transceiver xceiv;
+ struct otg_transceiver *xceiv;
int nIrq;
unsigned irq_wake:1;
@@ -386,6 +395,9 @@ struct musb {
unsigned is_multipoint:1;
unsigned ignore_disconnect:1; /* during bus resets */
+ unsigned hb_iso_rx:1; /* high bandwidth iso rx? */
+ unsigned hb_iso_tx:1; /* high bandwidth iso tx? */
+
#ifdef C_MP_TX
unsigned bulk_split:1;
#define can_bulk_split(musb,type) \
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f79440cdfe7e..8b3c4e2ed7b8 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -310,7 +310,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
/* setup DMA, then program endpoint CSR */
request_size = min(request->length,
musb_ep->dma->max_len);
- if (request_size <= musb_ep->packet_sz)
+ if (request_size < musb_ep->packet_sz)
musb_ep->dma->desired_mode = 0;
else
musb_ep->dma->desired_mode = 1;
@@ -349,7 +349,8 @@ static void txstate(struct musb *musb, struct musb_request *req)
#elif defined(CONFIG_USB_TI_CPPI_DMA)
/* program endpoint CSR first, then setup DMA */
csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
- csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
+ csr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE |
+ MUSB_TXCSR_MODE;
musb_writew(epio, MUSB_TXCSR,
(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
| csr);
@@ -1405,7 +1406,7 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget)
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_PERIPHERAL:
/* NOTE: OTG state machine doesn't include B_SUSPENDED;
* that's part of the standard usb 1.1 state machine, and
@@ -1507,9 +1508,9 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
{
struct musb *musb = gadget_to_musb(gadget);
- if (!musb->xceiv.set_power)
+ if (!musb->xceiv->set_power)
return -EOPNOTSUPP;
- return otg_set_power(&musb->xceiv, mA);
+ return otg_set_power(musb->xceiv, mA);
}
static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
@@ -1732,11 +1733,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
spin_lock_irqsave(&musb->lock, flags);
- /* REVISIT always use otg_set_peripheral(), handling
- * issues including the root hub one below ...
- */
- musb->xceiv.gadget = &musb->g;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ otg_set_peripheral(musb->xceiv, &musb->g);
musb->is_active = 1;
/* FIXME this ignores the softconnect flag. Drivers are
@@ -1748,6 +1745,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
if (!is_otg_enabled(musb))
musb_start(musb);
+ otg_set_peripheral(musb->xceiv, &musb->g);
+
spin_unlock_irqrestore(&musb->lock, flags);
if (is_otg_enabled(musb)) {
@@ -1761,8 +1760,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
if (retval < 0) {
DBG(1, "add_hcd failed, %d\n", retval);
spin_lock_irqsave(&musb->lock, flags);
- musb->xceiv.gadget = NULL;
- musb->xceiv.state = OTG_STATE_UNDEFINED;
+ otg_set_peripheral(musb->xceiv, NULL);
musb->gadget_driver = NULL;
musb->g.dev.driver = NULL;
spin_unlock_irqrestore(&musb->lock, flags);
@@ -1845,8 +1843,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
(void) musb_gadget_vbus_draw(&musb->g, 0);
- musb->xceiv.state = OTG_STATE_UNDEFINED;
+ musb->xceiv->state = OTG_STATE_UNDEFINED;
stop_activity(musb, driver);
+ otg_set_peripheral(musb->xceiv, NULL);
DBG(3, "unregistering driver %s\n", driver->function);
spin_unlock_irqrestore(&musb->lock, flags);
@@ -1882,7 +1881,7 @@ EXPORT_SYMBOL(usb_gadget_unregister_driver);
void musb_g_resume(struct musb *musb)
{
musb->is_suspended = 0;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_IDLE:
break;
case OTG_STATE_B_WAIT_ACON:
@@ -1908,10 +1907,10 @@ void musb_g_suspend(struct musb *musb)
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
DBG(3, "devctl %02x\n", devctl);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_B_IDLE:
if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
break;
case OTG_STATE_B_PERIPHERAL:
musb->is_suspended = 1;
@@ -1957,22 +1956,24 @@ void musb_g_disconnect(struct musb *musb)
spin_lock(&musb->lock);
}
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
default:
#ifdef CONFIG_USB_MUSB_OTG
DBG(2, "Unhandled disconnect %s, setting a_idle\n",
otg_state_string(musb));
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
+ MUSB_HST_MODE(musb);
break;
case OTG_STATE_A_PERIPHERAL:
- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ MUSB_HST_MODE(musb);
break;
case OTG_STATE_B_WAIT_ACON:
case OTG_STATE_B_HOST:
#endif
case OTG_STATE_B_PERIPHERAL:
case OTG_STATE_B_IDLE:
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
break;
case OTG_STATE_B_SRP_INIT:
break;
@@ -2028,10 +2029,10 @@ __acquires(musb->lock)
* or else after HNP, as A-Device
*/
if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
musb->g.is_a_peripheral = 0;
} else if (is_otg_enabled(musb)) {
- musb->xceiv.state = OTG_STATE_A_PERIPHERAL;
+ musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
musb->g.is_a_peripheral = 1;
} else
WARN_ON(1);
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 3f5e30ddfa27..40ed50ecedff 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -4,6 +4,7 @@
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2006 by Texas Instruments
* Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -58,7 +59,8 @@
static char *decode_ep0stage(u8 stage)
{
switch (stage) {
- case MUSB_EP0_STAGE_SETUP: return "idle";
+ case MUSB_EP0_STAGE_IDLE: return "idle";
+ case MUSB_EP0_STAGE_SETUP: return "setup";
case MUSB_EP0_STAGE_TX: return "in";
case MUSB_EP0_STAGE_RX: return "out";
case MUSB_EP0_STAGE_ACKWAIT: return "wait";
@@ -628,7 +630,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
musb_writew(regs, MUSB_CSR0,
csr & ~MUSB_CSR0_P_SENTSTALL);
retval = IRQ_HANDLED;
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
csr = musb_readw(regs, MUSB_CSR0);
}
@@ -636,7 +638,18 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
if (csr & MUSB_CSR0_P_SETUPEND) {
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
retval = IRQ_HANDLED;
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ /* Transition into the early status phase */
+ switch (musb->ep0_state) {
+ case MUSB_EP0_STAGE_TX:
+ musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+ break;
+ case MUSB_EP0_STAGE_RX:
+ musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+ break;
+ default:
+ ERR("SetupEnd came in a wrong ep0stage %s",
+ decode_ep0stage(musb->ep0_state));
+ }
csr = musb_readw(regs, MUSB_CSR0);
/* NOTE: request may need completion */
}
@@ -697,11 +710,31 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
if (req)
musb_g_ep0_giveback(musb, req);
}
+
+ /*
+ * In case when several interrupts can get coalesced,
+ * check to see if we've already received a SETUP packet...
+ */
+ if (csr & MUSB_CSR0_RXPKTRDY)
+ goto setup;
+
+ retval = IRQ_HANDLED;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
+ break;
+
+ case MUSB_EP0_STAGE_IDLE:
+ /*
+ * This state is typically (but not always) indiscernible
+ * from the status states since the corresponding interrupts
+ * tend to happen within too little period of time (with only
+ * a zero-length packet in between) and so get coalesced...
+ */
retval = IRQ_HANDLED;
musb->ep0_state = MUSB_EP0_STAGE_SETUP;
/* FALLTHROUGH */
case MUSB_EP0_STAGE_SETUP:
+setup:
if (csr & MUSB_CSR0_RXPKTRDY) {
struct usb_ctrlrequest setup;
int handled = 0;
@@ -783,7 +816,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb)
stall:
DBG(3, "stall (%d)\n", handled);
musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
finish:
musb_writew(regs, MUSB_CSR0,
musb->ackpend);
@@ -803,7 +836,7 @@ finish:
/* "can't happen" */
WARN_ON(1);
musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
break;
}
@@ -959,7 +992,7 @@ static int musb_g_ep0_halt(struct usb_ep *e, int value)
csr |= MUSB_CSR0_P_SENDSTALL;
musb_writew(regs, MUSB_CSR0, csr);
- musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+ musb->ep0_state = MUSB_EP0_STAGE_IDLE;
musb->ackpend = 0;
break;
default:
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index db1b57415ec7..94a2a350a414 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -181,6 +181,19 @@ static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
musb_writew(ep->regs, MUSB_TXCSR, txcsr);
}
+static void musb_ep_set_qh(struct musb_hw_ep *ep, int is_in, struct musb_qh *qh)
+{
+ if (is_in != 0 || ep->is_shared_fifo)
+ ep->in_qh = qh;
+ if (is_in == 0 || ep->is_shared_fifo)
+ ep->out_qh = qh;
+}
+
+static struct musb_qh *musb_ep_get_qh(struct musb_hw_ep *ep, int is_in)
+{
+ return is_in ? ep->in_qh : ep->out_qh;
+}
+
/*
* Start the URB at the front of an endpoint's queue
* end must be claimed from the caller.
@@ -210,7 +223,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
case USB_ENDPOINT_XFER_CONTROL:
/* control transfers always start with SETUP */
is_in = 0;
- hw_ep->out_qh = qh;
musb->ep0_stage = MUSB_EP0_START;
buf = urb->setup_packet;
len = 8;
@@ -239,10 +251,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
epnum, buf + offset, len);
/* Configure endpoint */
- if (is_in || hw_ep->is_shared_fifo)
- hw_ep->in_qh = qh;
- else
- hw_ep->out_qh = qh;
+ musb_ep_set_qh(hw_ep, is_in, qh);
musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
/* transmit may have more work: start it when it is time */
@@ -286,9 +295,8 @@ start:
}
}
-/* caller owns controller lock, irqs are blocked */
-static void
-__musb_giveback(struct musb *musb, struct urb *urb, int status)
+/* Context: caller owns controller lock, IRQs are blocked */
+static void musb_giveback(struct musb *musb, struct urb *urb, int status)
__releases(musb->lock)
__acquires(musb->lock)
{
@@ -321,60 +329,57 @@ __acquires(musb->lock)
spin_lock(&musb->lock);
}
-/* for bulk/interrupt endpoints only */
-static inline void
-musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
+/* For bulk/interrupt endpoints only */
+static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
+ struct urb *urb)
{
- struct usb_device *udev = urb->dev;
+ void __iomem *epio = qh->hw_ep->regs;
u16 csr;
- void __iomem *epio = ep->regs;
- struct musb_qh *qh;
- /* FIXME: the current Mentor DMA code seems to have
+ /*
+ * FIXME: the current Mentor DMA code seems to have
* problems getting toggle correct.
*/
- if (is_in || ep->is_shared_fifo)
- qh = ep->in_qh;
+ if (is_in)
+ csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
else
- qh = ep->out_qh;
+ csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
- if (!is_in) {
- csr = musb_readw(epio, MUSB_TXCSR);
- usb_settoggle(udev, qh->epnum, 1,
- (csr & MUSB_TXCSR_H_DATATOGGLE)
- ? 1 : 0);
- } else {
- csr = musb_readw(epio, MUSB_RXCSR);
- usb_settoggle(udev, qh->epnum, 0,
- (csr & MUSB_RXCSR_H_DATATOGGLE)
- ? 1 : 0);
- }
+ usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
}
-/* caller owns controller lock, irqs are blocked */
-static struct musb_qh *
-musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
+/*
+ * Advance this hardware endpoint's queue, completing the specified URB and
+ * advancing to either the next URB queued to that qh, or else invalidating
+ * that qh and advancing to the next qh scheduled after the current one.
+ *
+ * Context: caller owns controller lock, IRQs are blocked
+ */
+static void musb_advance_schedule(struct musb *musb, struct urb *urb,
+ struct musb_hw_ep *hw_ep, int is_in)
{
+ struct musb_qh *qh = musb_ep_get_qh(hw_ep, is_in);
struct musb_hw_ep *ep = qh->hw_ep;
- struct musb *musb = ep->musb;
- int is_in = usb_pipein(urb->pipe);
int ready = qh->is_ready;
+ int status;
+
+ status = (urb->status == -EINPROGRESS) ? 0 : urb->status;
/* save toggle eagerly, for paranoia */
switch (qh->type) {
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
- musb_save_toggle(ep, is_in, urb);
+ musb_save_toggle(qh, is_in, urb);
break;
case USB_ENDPOINT_XFER_ISOC:
- if (status == 0 && urb->error_count)
+ if (urb->error_count)
status = -EXDEV;
break;
}
qh->is_ready = 0;
- __musb_giveback(musb, urb, status);
+ musb_giveback(musb, urb, status);
qh->is_ready = ready;
/* reclaim resources (and bandwidth) ASAP; deschedule it, and
@@ -388,11 +393,8 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
else
ep->tx_reinit = 1;
- /* clobber old pointers to this qh */
- if (is_in || ep->is_shared_fifo)
- ep->in_qh = NULL;
- else
- ep->out_qh = NULL;
+ /* Clobber old pointers to this qh */
+ musb_ep_set_qh(ep, is_in, NULL);
qh->hep->hcpriv = NULL;
switch (qh->type) {
@@ -421,36 +423,10 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
break;
}
}
- return qh;
-}
-
-/*
- * Advance this hardware endpoint's queue, completing the specified urb and
- * advancing to either the next urb queued to that qh, or else invalidating
- * that qh and advancing to the next qh scheduled after the current one.
- *
- * Context: caller owns controller lock, irqs are blocked
- */
-static void
-musb_advance_schedule(struct musb *musb, struct urb *urb,
- struct musb_hw_ep *hw_ep, int is_in)
-{
- struct musb_qh *qh;
-
- if (is_in || hw_ep->is_shared_fifo)
- qh = hw_ep->in_qh;
- else
- qh = hw_ep->out_qh;
-
- if (urb->status == -EINPROGRESS)
- qh = musb_giveback(qh, urb, 0);
- else
- qh = musb_giveback(qh, urb, urb->status);
if (qh != NULL && qh->is_ready) {
DBG(4, "... next ep%d %cX urb %p\n",
- hw_ep->epnum, is_in ? 'R' : 'T',
- next_urb(qh));
+ hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh));
musb_start_urb(musb, is_in, qh);
}
}
@@ -629,7 +605,8 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
/* NOTE: bulk combining rewrites high bits of maxpacket */
- musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket);
+ musb_writew(ep->regs, MUSB_RXMAXP,
+ qh->maxpacket | ((qh->hb_mult - 1) << 11));
ep->rx_reinit = 0;
}
@@ -651,9 +628,10 @@ static bool musb_tx_dma_program(struct dma_controller *dma,
csr = musb_readw(epio, MUSB_TXCSR);
if (length > pkt_size) {
mode = 1;
- csr |= MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_DMAENAB;
+ csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB;
+ /* autoset shouldn't be set in high bandwidth */
+ if (qh->hb_mult == 1)
+ csr |= MUSB_TXCSR_AUTOSET;
} else {
mode = 0;
csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
@@ -703,15 +681,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
void __iomem *mbase = musb->mregs;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
- struct musb_qh *qh;
- u16 packet_sz;
-
- if (!is_out || hw_ep->is_shared_fifo)
- qh = hw_ep->in_qh;
- else
- qh = hw_ep->out_qh;
-
- packet_sz = qh->maxpacket;
+ struct musb_qh *qh = musb_ep_get_qh(hw_ep, !is_out);
+ u16 packet_sz = qh->maxpacket;
DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
"h_addr%02x h_port%02x bytes %d\n",
@@ -1129,17 +1100,14 @@ void musb_host_tx(struct musb *musb, u8 epnum)
u16 tx_csr;
size_t length = 0;
size_t offset = 0;
- struct urb *urb;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
- struct musb_qh *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh
- : hw_ep->out_qh;
+ struct musb_qh *qh = hw_ep->out_qh;
+ struct urb *urb = next_urb(qh);
u32 status = 0;
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
- urb = next_urb(qh);
-
musb_ep_select(mbase, epnum);
tx_csr = musb_readw(epio, MUSB_TXCSR);
@@ -1427,7 +1395,7 @@ static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep)
urb->actual_length += dma->actual_len;
dma->actual_len = 0L;
}
- musb_save_toggle(ep, 1, urb);
+ musb_save_toggle(cur_qh, 1, urb);
/* move cur_qh to end of queue */
list_move_tail(&cur_qh->ring, &musb->in_bulk);
@@ -1531,6 +1499,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
/* packet error reported later */
iso_err = true;
}
+ } else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
+ DBG(3, "end %d high bandwidth incomplete ISO packet RX\n",
+ epnum);
+ status = -EPROTO;
}
/* faults abort the transfer */
@@ -1738,7 +1710,11 @@ void musb_host_rx(struct musb *musb, u8 epnum)
val &= ~MUSB_RXCSR_H_AUTOREQ;
else
val |= MUSB_RXCSR_H_AUTOREQ;
- val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
+ val |= MUSB_RXCSR_DMAENAB;
+
+ /* autoclear shouldn't be set in high bandwidth */
+ if (qh->hb_mult == 1)
+ val |= MUSB_RXCSR_AUTOCLEAR;
musb_writew(epio, MUSB_RXCSR,
MUSB_RXCSR_H_WZC_BITS | val);
@@ -1817,19 +1793,17 @@ static int musb_schedule(
epnum++, hw_ep++) {
int diff;
- if (is_in || hw_ep->is_shared_fifo) {
- if (hw_ep->in_qh != NULL)
- continue;
- } else if (hw_ep->out_qh != NULL)
+ if (musb_ep_get_qh(hw_ep, is_in) != NULL)
continue;
if (hw_ep == musb->bulk_ep)
continue;
if (is_in)
- diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
+ diff = hw_ep->max_packet_sz_rx;
else
- diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
+ diff = hw_ep->max_packet_sz_tx;
+ diff -= (qh->maxpacket * qh->hb_mult);
if (diff >= 0 && best_diff > diff) {
best_diff = diff;
@@ -1932,15 +1906,27 @@ static int musb_urb_enqueue(
qh->is_ready = 1;
qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+ qh->type = usb_endpoint_type(epd);
- /* no high bandwidth support yet */
- if (qh->maxpacket & ~0x7ff) {
- ret = -EMSGSIZE;
- goto done;
+ /* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier.
+ * Some musb cores don't support high bandwidth ISO transfers; and
+ * we don't (yet!) support high bandwidth interrupt transfers.
+ */
+ qh->hb_mult = 1 + ((qh->maxpacket >> 11) & 0x03);
+ if (qh->hb_mult > 1) {
+ int ok = (qh->type == USB_ENDPOINT_XFER_ISOC);
+
+ if (ok)
+ ok = (usb_pipein(urb->pipe) && musb->hb_iso_rx)
+ || (usb_pipeout(urb->pipe) && musb->hb_iso_tx);
+ if (!ok) {
+ ret = -EMSGSIZE;
+ goto done;
+ }
+ qh->maxpacket &= 0x7ff;
}
qh->epnum = usb_endpoint_num(epd);
- qh->type = usb_endpoint_type(epd);
/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
@@ -2052,14 +2038,15 @@ done:
* called with controller locked, irqs blocked
* that hardware queue advances to the next transfer, unless prevented
*/
-static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
+static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh)
{
struct musb_hw_ep *ep = qh->hw_ep;
void __iomem *epio = ep->regs;
unsigned hw_end = ep->epnum;
void __iomem *regs = ep->musb->mregs;
- u16 csr;
+ int is_in = usb_pipein(urb->pipe);
int status = 0;
+ u16 csr;
musb_ep_select(regs, hw_end);
@@ -2112,14 +2099,14 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
struct musb *musb = hcd_to_musb(hcd);
struct musb_qh *qh;
- struct list_head *sched;
unsigned long flags;
+ int is_in = usb_pipein(urb->pipe);
int ret;
DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
usb_pipedevice(urb->pipe),
usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) ? "in" : "out");
+ is_in ? "in" : "out");
spin_lock_irqsave(&musb->lock, flags);
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
@@ -2130,47 +2117,25 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
if (!qh)
goto done;
- /* Any URB not actively programmed into endpoint hardware can be
+ /*
+ * Any URB not actively programmed into endpoint hardware can be
* immediately given back; that's any URB not at the head of an
* endpoint queue, unless someday we get real DMA queues. And even
* if it's at the head, it might not be known to the hardware...
*
- * Otherwise abort current transfer, pending dma, etc.; urb->status
+ * Otherwise abort current transfer, pending DMA, etc.; urb->status
* has already been updated. This is a synchronous abort; it'd be
* OK to hold off until after some IRQ, though.
+ *
+ * NOTE: qh is invalid unless !list_empty(&hep->urb_list)
*/
- if (!qh->is_ready || urb->urb_list.prev != &qh->hep->urb_list)
- ret = -EINPROGRESS;
- else {
- switch (qh->type) {
- case USB_ENDPOINT_XFER_CONTROL:
- sched = &musb->control;
- break;
- case USB_ENDPOINT_XFER_BULK:
- if (qh->mux == 1) {
- if (usb_pipein(urb->pipe))
- sched = &musb->in_bulk;
- else
- sched = &musb->out_bulk;
- break;
- }
- default:
- /* REVISIT when we get a schedule tree, periodic
- * transfers won't always be at the head of a
- * singleton queue...
- */
- sched = NULL;
- break;
- }
- }
-
- /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
- if (ret < 0 || (sched && qh != first_qh(sched))) {
+ if (!qh->is_ready
+ || urb->urb_list.prev != &qh->hep->urb_list
+ || musb_ep_get_qh(qh->hw_ep, is_in) != qh) {
int ready = qh->is_ready;
- ret = 0;
qh->is_ready = 0;
- __musb_giveback(musb, urb, 0);
+ musb_giveback(musb, urb, 0);
qh->is_ready = ready;
/* If nothing else (usually musb_giveback) is using it
@@ -2182,7 +2147,7 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
kfree(qh);
}
} else
- ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+ ret = musb_cleanup_urb(urb, qh);
done:
spin_unlock_irqrestore(&musb->lock, flags);
return ret;
@@ -2192,13 +2157,11 @@ done:
static void
musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
{
- u8 epnum = hep->desc.bEndpointAddress;
+ u8 is_in = hep->desc.bEndpointAddress & USB_DIR_IN;
unsigned long flags;
struct musb *musb = hcd_to_musb(hcd);
- u8 is_in = epnum & USB_DIR_IN;
struct musb_qh *qh;
struct urb *urb;
- struct list_head *sched;
spin_lock_irqsave(&musb->lock, flags);
@@ -2206,31 +2169,11 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
if (qh == NULL)
goto exit;
- switch (qh->type) {
- case USB_ENDPOINT_XFER_CONTROL:
- sched = &musb->control;
- break;
- case USB_ENDPOINT_XFER_BULK:
- if (qh->mux == 1) {
- if (is_in)
- sched = &musb->in_bulk;
- else
- sched = &musb->out_bulk;
- break;
- }
- default:
- /* REVISIT when we get a schedule tree, periodic transfers
- * won't always be at the head of a singleton queue...
- */
- sched = NULL;
- break;
- }
-
- /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
+ /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */
- /* kick first urb off the hardware, if needed */
+ /* Kick the first URB off the hardware, if needed */
qh->is_ready = 0;
- if (!sched || qh == first_qh(sched)) {
+ if (musb_ep_get_qh(qh->hw_ep, is_in) == qh) {
urb = next_urb(qh);
/* make software (then hardware) stop ASAP */
@@ -2238,7 +2181,7 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
urb->status = -ESHUTDOWN;
/* cleanup */
- musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+ musb_cleanup_urb(urb, qh);
/* Then nuke all the others ... and advance the
* queue on hw_ep (e.g. bulk ring) when we're done.
@@ -2254,7 +2197,7 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
* will activate any of these as it advances.
*/
while (!list_empty(&hep->urb_list))
- __musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
+ musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
hep->hcpriv = NULL;
list_del(&qh->ring);
@@ -2293,7 +2236,7 @@ static int musb_bus_suspend(struct usb_hcd *hcd)
{
struct musb *musb = hcd_to_musb(hcd);
- if (musb->xceiv.state == OTG_STATE_A_SUSPEND)
+ if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
return 0;
if (is_host_active(musb) && musb->is_active) {
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 0b7fbcd21963..14b00776638d 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -67,6 +67,7 @@ struct musb_qh {
u8 is_ready; /* safe to modify hw_ep */
u8 type; /* XFERTYPE_* */
u8 epnum;
+ u8 hb_mult; /* high bandwidth pkts per uf */
u16 maxpacket;
u16 frame; /* for periodic schedule */
unsigned iso_idx; /* in urb->iso_frame_desc[] */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index bf677acc83db..bfe5fe4ebfee 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -78,18 +78,22 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
DBG(3, "Root port suspended, power %02x\n", power);
musb->port1_status |= USB_PORT_STAT_SUSPEND;
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_HOST:
- musb->xceiv.state = OTG_STATE_A_SUSPEND;
+ musb->xceiv->state = OTG_STATE_A_SUSPEND;
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.host->b_hnp_enable;
+ && musb->xceiv->host->b_hnp_enable;
+ if (musb->is_active)
+ mod_timer(&musb->otg_timer, jiffies
+ + msecs_to_jiffies(
+ OTG_TIME_A_AIDL_BDIS));
musb_platform_try_idle(musb, 0);
break;
#ifdef CONFIG_USB_MUSB_OTG
case OTG_STATE_B_HOST:
- musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+ musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
musb->is_active = is_otg_enabled(musb)
- && musb->xceiv.host->b_hnp_enable;
+ && musb->xceiv->host->b_hnp_enable;
musb_platform_try_idle(musb, 0);
break;
#endif
@@ -116,7 +120,7 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
void __iomem *mbase = musb->mregs;
#ifdef CONFIG_USB_MUSB_OTG
- if (musb->xceiv.state == OTG_STATE_B_IDLE) {
+ if (musb->xceiv->state == OTG_STATE_B_IDLE) {
DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
musb->port1_status &= ~USB_PORT_STAT_RESET;
return;
@@ -186,14 +190,23 @@ void musb_root_disconnect(struct musb *musb)
usb_hcd_poll_rh_status(musb_to_hcd(musb));
musb->is_active = 0;
- switch (musb->xceiv.state) {
- case OTG_STATE_A_HOST:
+ switch (musb->xceiv->state) {
case OTG_STATE_A_SUSPEND:
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+#ifdef CONFIG_USB_MUSB_OTG
+ if (is_otg_enabled(musb)
+ && musb->xceiv->host->b_hnp_enable) {
+ musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
+ musb->g.is_a_peripheral = 1;
+ break;
+ }
+#endif
+ /* FALLTHROUGH */
+ case OTG_STATE_A_HOST:
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
musb->is_active = 0;
break;
case OTG_STATE_A_WAIT_VFALL:
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
break;
default:
DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
@@ -332,7 +345,7 @@ int musb_hub_control(
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
usb_hcd_poll_rh_status(musb_to_hcd(musb));
/* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
}
put_unaligned(cpu_to_le32(musb->port1_status
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 60924ce08493..34875201ee04 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -44,7 +44,6 @@
#define get_cpu_rev() 2
#endif
-#define MUSB_TIMEOUT_A_WAIT_BCON 1100
static struct timer_list musb_idle_timer;
@@ -61,17 +60,17 @@ static void musb_do_idle(unsigned long _musb)
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_BCON:
devctl &= ~MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
} else {
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
}
break;
@@ -89,7 +88,7 @@ static void musb_do_idle(unsigned long _musb)
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
usb_hcd_poll_rh_status(musb_to_hcd(musb));
/* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv.state = OTG_STATE_A_HOST;
+ musb->xceiv->state = OTG_STATE_A_HOST;
}
break;
#endif
@@ -97,9 +96,9 @@ static void musb_do_idle(unsigned long _musb)
case OTG_STATE_A_HOST:
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE)
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
else
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
#endif
default:
break;
@@ -118,7 +117,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || ((musb->a_wait_bcon == 0)
- && (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+ && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
del_timer(&musb_idle_timer);
last_timer = jiffies;
@@ -163,8 +162,8 @@ static void omap_set_vbus(struct musb *musb, int is_on)
if (is_on) {
musb->is_active = 1;
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
@@ -175,8 +174,8 @@ static void omap_set_vbus(struct musb *musb, int is_on)
* jumping right to B_IDLE...
*/
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
devctl &= ~MUSB_DEVCTL_SESSION;
MUSB_DEV_MODE(musb);
@@ -188,10 +187,6 @@ static void omap_set_vbus(struct musb *musb, int is_on)
otg_state_string(musb),
musb_readb(musb->mregs, MUSB_DEVCTL));
}
-static int omap_set_power(struct otg_transceiver *x, unsigned mA)
-{
- return 0;
-}
static int musb_platform_resume(struct musb *musb);
@@ -202,24 +197,6 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
devctl |= MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
- switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- case MUSB_HOST:
- otg_set_host(&musb->xceiv, musb->xceiv.host);
- break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- case MUSB_PERIPHERAL:
- otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
- break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
- case MUSB_OTG:
- break;
-#endif
- default:
- return -EINVAL;
- }
return 0;
}
@@ -231,6 +208,16 @@ int __init musb_platform_init(struct musb *musb)
omap_cfg_reg(AE5_2430_USB0HS_STP);
#endif
+ /* We require some kind of external transceiver, hooked
+ * up through ULPI. TWL4030-family PMICs include one,
+ * which needs a driver, drivers aren't always needed.
+ */
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv) {
+ pr_err("HS USB OTG: no transceiver configured\n");
+ return -ENODEV;
+ }
+
musb_platform_resume(musb);
l = omap_readl(OTG_SYSCONFIG);
@@ -240,7 +227,12 @@ int __init musb_platform_init(struct musb *musb)
l &= ~AUTOIDLE; /* disable auto idle */
l &= ~NOIDLE; /* remove possible noidle */
l |= SMARTIDLE; /* enable smart idle */
- l |= AUTOIDLE; /* enable auto idle */
+ /*
+ * MUSB AUTOIDLE don't work in 3430.
+ * Workaround by Richard Woodruff/TI
+ */
+ if (!cpu_is_omap3430())
+ l |= AUTOIDLE; /* enable auto idle */
omap_writel(l, OTG_SYSCONFIG);
l = omap_readl(OTG_INTERFSEL);
@@ -257,9 +249,6 @@ int __init musb_platform_init(struct musb *musb)
if (is_host_enabled(musb))
musb->board_set_vbus = omap_set_vbus;
- if (is_peripheral_enabled(musb))
- musb->xceiv.set_power = omap_set_power;
- musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
@@ -282,8 +271,7 @@ int musb_platform_suspend(struct musb *musb)
l |= ENABLEWAKEUP; /* enable wakeup */
omap_writel(l, OTG_SYSCONFIG);
- if (musb->xceiv.set_suspend)
- musb->xceiv.set_suspend(&musb->xceiv, 1);
+ otg_set_suspend(musb->xceiv, 1);
if (musb->set_clock)
musb->set_clock(musb->clock, 0);
@@ -300,8 +288,7 @@ static int musb_platform_resume(struct musb *musb)
if (!musb->clock)
return 0;
- if (musb->xceiv.set_suspend)
- musb->xceiv.set_suspend(&musb->xceiv, 0);
+ otg_set_suspend(musb->xceiv, 0);
if (musb->set_clock)
musb->set_clock(musb->clock, 1);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 4ac1477d3569..88b587c703e9 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -259,6 +259,8 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
tusb_fifo_read_unaligned(fifo, buf, len);
}
+static struct musb *the_musb;
+
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
/* This is used by gadget drivers, and OTG transceiver logic, allowing
@@ -269,7 +271,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
*/
static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
{
- struct musb *musb = container_of(x, struct musb, xceiv);
+ struct musb *musb = the_musb;
void __iomem *tbase = musb->ctrl_base;
u32 reg;
@@ -419,7 +421,7 @@ static void musb_do_idle(unsigned long _musb)
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_BCON:
if ((musb->a_wait_bcon != 0)
&& (musb->idle_timeout == 0
@@ -483,7 +485,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || ((musb->a_wait_bcon == 0)
- && (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+ && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
del_timer(&musb_idle_timer);
last_timer = jiffies;
@@ -532,8 +534,8 @@ static void tusb_source_power(struct musb *musb, int is_on)
if (musb->set_clock)
musb->set_clock(musb->clock, 1);
timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
- musb->xceiv.default_a = 1;
- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
conf |= TUSB_DEV_CONF_USB_HOST_MODE;
@@ -546,24 +548,24 @@ static void tusb_source_power(struct musb *musb, int is_on)
/* If ID pin is grounded, we want to be a_idle */
otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_VRISE:
case OTG_STATE_A_WAIT_BCON:
- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
break;
case OTG_STATE_A_WAIT_VFALL:
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
break;
default:
- musb->xceiv.state = OTG_STATE_A_IDLE;
+ musb->xceiv->state = OTG_STATE_A_IDLE;
}
musb->is_active = 0;
- musb->xceiv.default_a = 1;
+ musb->xceiv->default_a = 1;
MUSB_HST_MODE(musb);
} else {
musb->is_active = 0;
- musb->xceiv.default_a = 0;
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->default_a = 0;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
}
@@ -674,7 +676,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
else
default_a = is_host_enabled(musb);
DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
- musb->xceiv.default_a = default_a;
+ musb->xceiv->default_a = default_a;
tusb_source_power(musb, default_a);
/* Don't allow idling immediately */
@@ -686,7 +688,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
/* B-dev state machine: no vbus ~= disconnect */
- if ((is_otg_enabled(musb) && !musb->xceiv.default_a)
+ if ((is_otg_enabled(musb) && !musb->xceiv->default_a)
|| !is_host_enabled(musb)) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
/* ? musb_root_disconnect(musb); */
@@ -701,9 +703,9 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
DBG(1, "Forcing disconnect (no interrupt)\n");
- if (musb->xceiv.state != OTG_STATE_B_IDLE) {
+ if (musb->xceiv->state != OTG_STATE_B_IDLE) {
/* INTR_DISCONNECT can hide... */
- musb->xceiv.state = OTG_STATE_B_IDLE;
+ musb->xceiv->state = OTG_STATE_B_IDLE;
musb->int_usb |= MUSB_INTR_DISCONNECT;
}
musb->is_active = 0;
@@ -717,7 +719,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
DBG(2, "vbus change, %s, otg %03x\n",
otg_state_string(musb), otg_stat);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_IDLE:
DBG(2, "Got SRP, turning on VBUS\n");
musb_set_vbus(musb, 1);
@@ -765,7 +767,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat);
- switch (musb->xceiv.state) {
+ switch (musb->xceiv->state) {
case OTG_STATE_A_WAIT_VRISE:
/* VBUS has probably been valid for a while now,
* but may well have bounced out of range a bit
@@ -777,7 +779,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
DBG(2, "devctl %02x\n", devctl);
break;
}
- musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
musb->is_active = 0;
idle_timeout = jiffies
+ msecs_to_jiffies(musb->a_wait_bcon);
@@ -1093,9 +1095,14 @@ int __init musb_platform_init(struct musb *musb)
{
struct platform_device *pdev;
struct resource *mem;
- void __iomem *sync;
+ void __iomem *sync = NULL;
int ret;
+ usb_nop_xceiv_register();
+ musb->xceiv = otg_get_transceiver();
+ if (!musb->xceiv)
+ return -ENODEV;
+
pdev = to_platform_device(musb->controller);
/* dma address for async dma */
@@ -1106,14 +1113,16 @@ int __init musb_platform_init(struct musb *musb)
mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!mem) {
pr_debug("no sync dma resource?\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto done;
}
musb->sync = mem->start;
sync = ioremap(mem->start, mem->end - mem->start + 1);
if (!sync) {
pr_debug("ioremap for sync failed\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto done;
}
musb->sync_va = sync;
@@ -1126,28 +1135,37 @@ int __init musb_platform_init(struct musb *musb)
if (ret) {
printk(KERN_ERR "Could not start tusb6010 (%d)\n",
ret);
- return -ENODEV;
+ goto done;
}
musb->isr = tusb_interrupt;
if (is_host_enabled(musb))
musb->board_set_vbus = tusb_source_power;
- if (is_peripheral_enabled(musb))
- musb->xceiv.set_power = tusb_draw_power;
+ if (is_peripheral_enabled(musb)) {
+ musb->xceiv->set_power = tusb_draw_power;
+ the_musb = musb;
+ }
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+done:
+ if (ret < 0) {
+ if (sync)
+ iounmap(sync);
+ usb_nop_xceiv_unregister();
+ }
return ret;
}
int musb_platform_exit(struct musb *musb)
{
del_timer_sync(&musb_idle_timer);
+ the_musb = NULL;
if (musb->board_set_power)
musb->board_set_power(0);
iounmap(musb->sync_va);
-
+ usb_nop_xceiv_unregister();
return 0;
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 05:37:52 +0300