diff options
Diffstat (limited to 'drivers/usb/misc')
-rw-r--r-- | drivers/usb/misc/Kconfig | 26 | ||||
-rw-r--r-- | drivers/usb/misc/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/misc/sisusbvga/sisusb.c | 4 | ||||
-rw-r--r-- | drivers/usb/misc/sisusbvga/sisusb_con.c | 2 | ||||
-rw-r--r-- | drivers/usb/misc/ucsi.c | 478 | ||||
-rw-r--r-- | drivers/usb/misc/ucsi.h | 215 | ||||
-rw-r--r-- | drivers/usb/misc/usbtest.c | 7 |
7 files changed, 729 insertions, 4 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index e9c5458dd848..9e5c835deeb2 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -259,3 +259,29 @@ config USB_CHAOSKEY To compile this driver as a module, choose M here: the module will be called chaoskey. + +config UCSI + tristate "USB Type-C Connector System Software Interface driver" + depends on ACPI + help + UCSI driver is meant to be used as a convenience tool for desktop and + server systems that are not equipped to handle USB in device mode. It + will always select USB host role for the USB Type-C ports on systems + that provide UCSI interface. + + USB Type-C Connector System Software Interface (UCSI) is a + specification for an interface that allows the Operating System to + control the USB Type-C ports on a system. Things the need controlling + include the USB Data Role (host or device), and when USB Power + Delivery is supported, the Power Role (source or sink). With USB + Type-C connectors, when two dual role capable devices are attached + together, the data role is selected randomly. Therefore it is + important to give the OS a way to select the role. Otherwise the user + would have to unplug and replug in order in order to attempt to swap + the data and power roles. + + The UCSI specification can be downloaded from: + http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.html + + To compile the driver as a module, choose M here: the module will be + called ucsi. diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 4bc755b15418..3d79faaad2fb 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o obj-$(CONFIG_USB_YUREX) += yurex.o obj-$(CONFIG_USB_HSIC_USB3503) += usb3503.o obj-$(CONFIG_USB_CHAOSKEY) += chaoskey.o +obj-$(CONFIG_UCSI) += ucsi.o obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ obj-$(CONFIG_USB_LINK_LAYER_TEST) += lvstest.o diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index a22de52cb083..15666ad7c772 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2420,7 +2420,7 @@ static int sisusb_open(struct inode *inode, struct file *file) if (!sisusb->devinit) { if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH || - sisusb->sisusb_dev->speed == USB_SPEED_SUPER) { + sisusb->sisusb_dev->speed >= USB_SPEED_SUPER) { if (sisusb_init_gfxdevice(sisusb, 0)) { mutex_unlock(&sisusb->lock); dev_err(&sisusb->sisusb_dev->dev, @@ -3127,7 +3127,7 @@ static int sisusb_probe(struct usb_interface *intf, sisusb->present = 1; - if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) { + if (dev->speed == USB_SPEED_HIGH || dev->speed >= USB_SPEED_SUPER) { int initscreen = 1; #ifdef INCL_SISUSB_CON if (sisusb_first_vc > 0 && sisusb_last_vc > 0 && diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c index ace343088915..afa853209f1d 100644 --- a/drivers/usb/misc/sisusbvga/sisusb_con.c +++ b/drivers/usb/misc/sisusbvga/sisusb_con.c @@ -601,7 +601,7 @@ sisusbcon_save_screen(struct vc_data *c) /* interface routine */ static int -sisusbcon_set_palette(struct vc_data *c, unsigned char *table) +sisusbcon_set_palette(struct vc_data *c, const unsigned char *table) { struct sisusb_usb_data *sisusb; int i, j; diff --git a/drivers/usb/misc/ucsi.c b/drivers/usb/misc/ucsi.c new file mode 100644 index 000000000000..07397bddefa3 --- /dev/null +++ b/drivers/usb/misc/ucsi.c @@ -0,0 +1,478 @@ +/* + * USB Type-C Connector System Software Interface driver + * + * Copyright (C) 2016, Intel Corporation + * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/acpi.h> + +#include "ucsi.h" + +/* Double the time defined by MIN_TIME_TO_RESPOND_WITH_BUSY */ +#define UCSI_TIMEOUT_MS 20 + +enum ucsi_status { + UCSI_IDLE = 0, + UCSI_BUSY, + UCSI_ERROR, +}; + +struct ucsi_connector { + int num; + struct ucsi *ucsi; + struct work_struct work; + struct ucsi_connector_capability cap; +}; + +struct ucsi { + struct device *dev; + struct ucsi_data __iomem *data; + + enum ucsi_status status; + struct completion complete; + struct ucsi_capability cap; + struct ucsi_connector *connector; + + /* device lock */ + spinlock_t dev_lock; + + /* PPM Communication lock */ + struct mutex ppm_lock; + + /* PPM communication flags */ + unsigned long flags; +#define EVENT_PENDING 0 +#define COMMAND_PENDING 1 +}; + +static int ucsi_acpi_cmd(struct ucsi *ucsi, struct ucsi_control *ctrl) +{ + uuid_le uuid = UUID_LE(0x6f8398c2, 0x7ca4, 0x11e4, + 0xad, 0x36, 0x63, 0x10, 0x42, 0xb5, 0x00, 0x8f); + union acpi_object *obj; + + ucsi->data->ctrl.raw_cmd = ctrl->raw_cmd; + + obj = acpi_evaluate_dsm(ACPI_HANDLE(ucsi->dev), uuid.b, 1, 1, NULL); + if (!obj) { + dev_err(ucsi->dev, "%s: failed to evaluate _DSM\n", __func__); + return -EIO; + } + + ACPI_FREE(obj); + return 0; +} + +static void ucsi_acpi_notify(acpi_handle handle, u32 event, void *data) +{ + struct ucsi *ucsi = data; + struct ucsi_cci *cci; + + spin_lock(&ucsi->dev_lock); + + ucsi->status = UCSI_IDLE; + cci = &ucsi->data->cci; + + /* + * REVISIT: This is not documented behavior, but all known PPMs ACK + * asynchronous events by sending notification with cleared CCI. + */ + if (!ucsi->data->raw_cci) { + if (test_bit(EVENT_PENDING, &ucsi->flags)) + complete(&ucsi->complete); + else + dev_WARN(ucsi->dev, "spurious notification\n"); + goto out_unlock; + } + + if (test_bit(COMMAND_PENDING, &ucsi->flags)) { + if (cci->busy) { + ucsi->status = UCSI_BUSY; + complete(&ucsi->complete); + + goto out_unlock; + } else if (cci->ack_complete || cci->cmd_complete) { + /* Error Indication is only valid with commands */ + if (cci->error && cci->cmd_complete) + ucsi->status = UCSI_ERROR; + + ucsi->data->ctrl.raw_cmd = 0; + complete(&ucsi->complete); + } + } + + if (cci->connector_change) { + struct ucsi_connector *con; + + /* + * This is workaround for buggy PPMs that create asynchronous + * event notifications before OPM has enabled them. + */ + if (!ucsi->connector) + goto out_unlock; + + con = ucsi->connector + (cci->connector_change - 1); + + /* + * PPM will not clear the connector specific bit in Connector + * Change Indication field of CCI until the driver has ACK it, + * and the driver can not ACK it before it has been processed. + * The PPM will not generate new events before the first has + * been acknowledged, even if they are for an other connector. + * So only one event at a time. + */ + if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags)) + schedule_work(&con->work); + } +out_unlock: + spin_unlock(&ucsi->dev_lock); +} + +static int ucsi_ack(struct ucsi *ucsi, u8 cmd) +{ + struct ucsi_control ctrl; + int ret; + + ctrl.cmd.cmd = UCSI_ACK_CC_CI; + ctrl.cmd.length = 0; + ctrl.cmd.data = cmd; + ret = ucsi_acpi_cmd(ucsi, &ctrl); + if (ret) + return ret; + + /* Waiting for ACK also with ACK CMD for now */ + ret = wait_for_completion_timeout(&ucsi->complete, + msecs_to_jiffies(UCSI_TIMEOUT_MS)); + if (!ret) + return -ETIMEDOUT; + return 0; +} + +static int ucsi_run_cmd(struct ucsi *ucsi, struct ucsi_control *ctrl, + void *data, size_t size) +{ + u16 err_value = 0; + int ret; + + set_bit(COMMAND_PENDING, &ucsi->flags); + + ret = ucsi_acpi_cmd(ucsi, ctrl); + if (ret) + goto err_clear_flag; + + ret = wait_for_completion_timeout(&ucsi->complete, + msecs_to_jiffies(UCSI_TIMEOUT_MS)); + if (!ret) { + ret = -ETIMEDOUT; + goto err_clear_flag; + } + + switch (ucsi->status) { + case UCSI_IDLE: + if (data) + memcpy(data, ucsi->data->message_in, size); + + ret = ucsi_ack(ucsi, UCSI_ACK_CMD); + break; + case UCSI_BUSY: + /* The caller decides whether to cancel or not */ + ret = -EBUSY; + goto err_clear_flag; + case UCSI_ERROR: + ret = ucsi_ack(ucsi, UCSI_ACK_CMD); + if (ret) + goto err_clear_flag; + + ctrl->cmd.cmd = UCSI_GET_ERROR_STATUS; + ctrl->cmd.length = 0; + ctrl->cmd.data = 0; + ret = ucsi_acpi_cmd(ucsi, ctrl); + if (ret) + goto err_clear_flag; + + ret = wait_for_completion_timeout(&ucsi->complete, + msecs_to_jiffies(UCSI_TIMEOUT_MS)); + if (!ret) { + ret = -ETIMEDOUT; + goto err_clear_flag; + } + + memcpy(&err_value, ucsi->data->message_in, sizeof(err_value)); + + /* Something has really gone wrong */ + if (WARN_ON(ucsi->status == UCSI_ERROR)) { + ret = -ENODEV; + goto err_clear_flag; + } + + ret = ucsi_ack(ucsi, UCSI_ACK_CMD); + if (ret) + goto err_clear_flag; + + switch (err_value) { + case UCSI_ERROR_INCOMPATIBLE_PARTNER: + ret = -EOPNOTSUPP; + break; + case UCSI_ERROR_CC_COMMUNICATION_ERR: + ret = -ECOMM; + break; + case UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL: + ret = -EIO; + break; + case UCSI_ERROR_DEAD_BATTERY: + dev_warn(ucsi->dev, "Dead battery condition!\n"); + ret = -EPERM; + break; + /* The following mean a bug in this driver */ + case UCSI_ERROR_INVALID_CON_NUM: + case UCSI_ERROR_UNREGONIZED_CMD: + case UCSI_ERROR_INVALID_CMD_ARGUMENT: + default: + dev_warn(ucsi->dev, + "%s: possible UCSI driver bug - error %hu\n", + __func__, err_value); + ret = -EINVAL; + break; + } + break; + } + ctrl->raw_cmd = 0; +err_clear_flag: + clear_bit(COMMAND_PENDING, &ucsi->flags); + return ret; +} + +static void ucsi_connector_change(struct work_struct *work) +{ + struct ucsi_connector *con = container_of(work, struct ucsi_connector, + work); + struct ucsi_connector_status constat; + struct ucsi *ucsi = con->ucsi; + struct ucsi_control ctrl; + int ret; + + mutex_lock(&ucsi->ppm_lock); + + ctrl.cmd.cmd = UCSI_GET_CONNECTOR_STATUS; + ctrl.cmd.length = 0; + ctrl.cmd.data = con->num; + ret = ucsi_run_cmd(con->ucsi, &ctrl, &constat, sizeof(constat)); + if (ret) { + dev_err(ucsi->dev, "%s: failed to read connector status (%d)\n", + __func__, ret); + goto out_ack_event; + } + + /* Ignoring disconnections and Alternate Modes */ + if (!constat.connected || !(constat.change & + (UCSI_CONSTAT_PARTNER_CHANGE | UCSI_CONSTAT_CONNECT_CHANGE)) || + constat.partner_flags & UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE) + goto out_ack_event; + + /* If the partner got USB Host role, attempting swap */ + if (constat.partner_type & UCSI_CONSTAT_PARTNER_TYPE_DFP) { + ctrl.uor.cmd = UCSI_SET_UOR; + ctrl.uor.con_num = con->num; + ctrl.uor.role = UCSI_UOR_ROLE_DFP; + + ret = ucsi_run_cmd(con->ucsi, &ctrl, NULL, 0); + if (ret) + dev_err(ucsi->dev, "%s: failed to swap role (%d)\n", + __func__, ret); + } +out_ack_event: + ucsi_ack(ucsi, UCSI_ACK_EVENT); + clear_bit(EVENT_PENDING, &ucsi->flags); + mutex_unlock(&ucsi->ppm_lock); +} + +static int ucsi_reset_ppm(struct ucsi *ucsi) +{ + int timeout = UCSI_TIMEOUT_MS; + struct ucsi_control ctrl; + int ret; + + memset(&ctrl, 0, sizeof(ctrl)); + ctrl.cmd.cmd = UCSI_PPM_RESET; + ret = ucsi_acpi_cmd(ucsi, &ctrl); + if (ret) + return ret; + + /* There is no quarantee the PPM will ever set the RESET_COMPLETE bit */ + while (!ucsi->data->cci.reset_complete && timeout--) + usleep_range(1000, 2000); + return 0; +} + +static int ucsi_init(struct ucsi *ucsi) +{ + struct ucsi_connector *con; + struct ucsi_control ctrl; + int ret; + int i; + + init_completion(&ucsi->complete); + spin_lock_init(&ucsi->dev_lock); + mutex_init(&ucsi->ppm_lock); + + /* Reset the PPM */ + ret = ucsi_reset_ppm(ucsi); + if (ret) + return ret; + + /* + * REVISIT: Executing second reset to WA an issue seen on some of the + * Broxton based platforms, where the first reset puts the PPM into a + * state where it's unable to recognise some of the commands. + */ + ret = ucsi_reset_ppm(ucsi); + if (ret) + return ret; + + mutex_lock(&ucsi->ppm_lock); + + /* Enable basic notifications */ + ctrl.cmd.cmd = UCSI_SET_NOTIFICATION_ENABLE; + ctrl.cmd.length = 0; + ctrl.cmd.data = UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR; + ret = ucsi_run_cmd(ucsi, &ctrl, NULL, 0); + if (ret) + goto err_reset; + + /* Get PPM capabilities */ + ctrl.cmd.cmd = UCSI_GET_CAPABILITY; + ret = ucsi_run_cmd(ucsi, &ctrl, &ucsi->cap, sizeof(ucsi->cap)); + if (ret) + goto err_reset; + + if (!ucsi->cap.num_connectors) { + ret = -ENODEV; + goto err_reset; + } + + ucsi->connector = devm_kcalloc(ucsi->dev, ucsi->cap.num_connectors, + sizeof(*ucsi->connector), GFP_KERNEL); + if (!ucsi->connector) { + ret = -ENOMEM; + goto err_reset; + } + + for (i = 1, con = ucsi->connector; i < ucsi->cap.num_connectors + 1; + i++, con++) { + /* Get connector capability */ + ctrl.cmd.cmd = UCSI_GET_CONNECTOR_CAPABILITY; + ctrl.cmd.data = i; + ret = ucsi_run_cmd(ucsi, &ctrl, &con->cap, sizeof(con->cap)); + if (ret) + goto err_reset; + + con->num = i; + con->ucsi = ucsi; + INIT_WORK(&con->work, ucsi_connector_change); + } + + /* Enable all notifications */ + ctrl.cmd.cmd = UCSI_SET_NOTIFICATION_ENABLE; + ctrl.cmd.data = UCSI_ENABLE_NTFY_ALL; + ret = ucsi_run_cmd(ucsi, &ctrl, NULL, 0); + if (ret < 0) + goto err_reset; + + mutex_unlock(&ucsi->ppm_lock); + return 0; +err_reset: + ucsi_reset_ppm(ucsi); + mutex_unlock(&ucsi->ppm_lock); + return ret; +} + +static int ucsi_acpi_probe(struct platform_device *pdev) +{ + struct resource *res; + acpi_status status; + struct ucsi *ucsi; + int ret; + + ucsi = devm_kzalloc(&pdev->dev, sizeof(*ucsi), GFP_KERNEL); + if (!ucsi) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "missing memory resource\n"); + return -ENODEV; + } + + /* + * NOTE: ACPI has claimed the memory region as it's also an Operation + * Region. It's not possible to request it in the driver. + */ + ucsi->data = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!ucsi->data) + return -ENOMEM; + + ucsi->dev = &pdev->dev; + + status = acpi_install_notify_handler(ACPI_HANDLE(&pdev->dev), + ACPI_ALL_NOTIFY, + ucsi_acpi_notify, ucsi); + if (ACPI_FAILURE(status)) + return -ENODEV; + + ret = ucsi_init(ucsi); + if (ret) { + acpi_remove_notify_handler(ACPI_HANDLE(&pdev->dev), + ACPI_ALL_NOTIFY, + ucsi_acpi_notify); + return ret; + } + + platform_set_drvdata(pdev, ucsi); + return 0; +} + +static int ucsi_acpi_remove(struct platform_device *pdev) +{ + struct ucsi *ucsi = platform_get_drvdata(pdev); + + acpi_remove_notify_handler(ACPI_HANDLE(&pdev->dev), + ACPI_ALL_NOTIFY, ucsi_acpi_notify); + + /* Make sure there are no events in the middle of being processed */ + if (wait_on_bit_timeout(&ucsi->flags, EVENT_PENDING, + TASK_UNINTERRUPTIBLE, + msecs_to_jiffies(UCSI_TIMEOUT_MS))) + dev_WARN(ucsi->dev, "%s: Events still pending\n", __func__); + + ucsi_reset_ppm(ucsi); + return 0; +} + +static const struct acpi_device_id ucsi_acpi_match[] = { + { "PNP0CA0", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, ucsi_acpi_match); + +static struct platform_driver ucsi_acpi_platform_driver = { + .driver = { + .name = "ucsi_acpi", + .acpi_match_table = ACPI_PTR(ucsi_acpi_match), + }, + .probe = ucsi_acpi_probe, + .remove = ucsi_acpi_remove, +}; + +module_platform_driver(ucsi_acpi_platform_driver); + +MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("USB Type-C System Software Interface (UCSI) driver"); diff --git a/drivers/usb/misc/ucsi.h b/drivers/usb/misc/ucsi.h new file mode 100644 index 000000000000..6dd11d1fe225 --- /dev/null +++ b/drivers/usb/misc/ucsi.h @@ -0,0 +1,215 @@ + +#include <linux/types.h> + +/* -------------------------------------------------------------------------- */ + +/* Command Status and Connector Change Indication (CCI) data structure */ +struct ucsi_cci { + unsigned int RESERVED1:1; + unsigned int connector_change:7; + u8 data_length; + unsigned int RESERVED9:9; + unsigned int not_supported:1; + unsigned int cancel_complete:1; + unsigned int reset_complete:1; + unsigned int busy:1; + unsigned int ack_complete:1; + unsigned int error:1; + unsigned int cmd_complete:1; +} __packed; + +/* Default fields in CONTROL data structure */ +struct ucsi_command { + u8 cmd; + u8 length; + u64 data:48; +} __packed; + +/* Set USB Operation Mode Command structure */ +struct ucsi_uor_cmd { + u8 cmd; + u8 length; + u64 con_num:7; + u64 role:3; +#define UCSI_UOR_ROLE_DFP BIT(0) +#define UCSI_UOR_ROLE_UFP BIT(1) +#define UCSI_UOR_ROLE_DRP BIT(2) + u64 data:38; +} __packed; + +struct ucsi_control { + union { + u64 raw_cmd; + struct ucsi_command cmd; + struct ucsi_uor_cmd uor; + }; +}; + +struct ucsi_data { + u16 version; + u16 RESERVED; + union { + u32 raw_cci; + struct ucsi_cci cci; + }; + struct ucsi_control ctrl; + u32 message_in[4]; + u32 message_out[4]; +} __packed; + +/* Commands */ +#define UCSI_PPM_RESET 0x01 +#define UCSI_CANCEL 0x02 +#define UCSI_CONNECTOR_RESET 0x03 +#define UCSI_ACK_CC_CI 0x04 +#define UCSI_SET_NOTIFICATION_ENABLE 0x05 +#define UCSI_GET_CAPABILITY 0x06 +#define UCSI_GET_CONNECTOR_CAPABILITY 0x07 +#define UCSI_SET_UOM 0x08 +#define UCSI_SET_UOR 0x09 +#define UCSI_SET_PDM 0x0A +#define UCSI_SET_PDR 0x0B +#define UCSI_GET_ALTERNATE_MODES 0x0C +#define UCSI_GET_CAM_SUPPORTED 0x0D +#define UCSI_GET_CURRENT_CAM 0x0E +#define UCSI_SET_NEW_CAM 0x0F +#define UCSI_GET_PDOS 0x10 +#define UCSI_GET_CABLE_PROPERTY 0x11 +#define UCSI_GET_CONNECTOR_STATUS 0x12 +#define UCSI_GET_ERROR_STATUS 0x13 + +/* ACK_CC_CI commands */ +#define UCSI_ACK_EVENT 1 +#define UCSI_ACK_CMD 2 + +/* Bits for SET_NOTIFICATION_ENABLE command */ +#define UCSI_ENABLE_NTFY_CMD_COMPLETE BIT(0) +#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE BIT(1) +#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE BIT(2) +#define UCSI_ENABLE_NTFY_CAP_CHANGE BIT(5) +#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE BIT(6) +#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE BIT(7) +#define UCSI_ENABLE_NTFY_CAM_CHANGE BIT(8) +#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE BIT(9) +#define UCSI_ENABLE_NTFY_PARTNER_CHANGE BIT(11) +#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE BIT(12) +#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE BIT(14) +#define UCSI_ENABLE_NTFY_ERROR BIT(15) +#define UCSI_ENABLE_NTFY_ALL 0xdbe7 + +/* Error information returned by PPM in response to GET_ERROR_STATUS command. */ +#define UCSI_ERROR_UNREGONIZED_CMD BIT(0) +#define UCSI_ERROR_INVALID_CON_NUM BIT(1) +#define UCSI_ERROR_INVALID_CMD_ARGUMENT BIT(2) +#define UCSI_ERROR_INCOMPATIBLE_PARTNER BIT(3) +#define UCSI_ERROR_CC_COMMUNICATION_ERR BIT(4) +#define UCSI_ERROR_DEAD_BATTERY BIT(5) +#define UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL BIT(6) + +/* Data structure filled by PPM in response to GET_CAPABILITY command. */ +struct ucsi_capability { + u32 attributes; +#define UCSI_CAP_ATTR_DISABLE_STATE BIT(0) +#define UCSI_CAP_ATTR_BATTERY_CHARGING BIT(1) +#define UCSI_CAP_ATTR_USB_PD BIT(2) +#define UCSI_CAP_ATTR_TYPEC_CURRENT BIT(6) +#define UCSI_CAP_ATTR_POWER_AC_SUPPLY BIT(8) +#define UCSI_CAP_ATTR_POWER_OTHER BIT(10) +#define UCSI_CAP_ATTR_POWER_VBUS BIT(14) + u8 num_connectors; + u32 features:24; +#define UCSI_CAP_SET_UOM BIT(0) +#define UCSI_CAP_SET_PDM BIT(1) +#define UCSI_CAP_ALT_MODE_DETAILS BIT(2) +#define UCSI_CAP_ALT_MODE_OVERRIDE BIT(3) +#define UCSI_CAP_PDO_DETAILS BIT(4) +#define UCSI_CAP_CABLE_DETAILS BIT(5) +#define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS BIT(6) +#define UCSI_CAP_PD_RESET BIT(7) + u8 num_alt_modes; + u8 RESERVED; + u16 bc_version; + u16 pd_version; + u16 typec_version; +} __packed; + +/* Data structure filled by PPM in response to GET_CONNECTOR_CAPABILITY cmd. */ +struct ucsi_connector_capability { + u8 op_mode; +#define UCSI_CONCAP_OPMODE_DFP BIT(0) +#define UCSI_CONCAP_OPMODE_UFP BIT(1) +#define UCSI_CONCAP_OPMODE_DRP BIT(2) +#define UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY BIT(3) +#define UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY BIT(4) +#define UCSI_CONCAP_OPMODE_USB2 BIT(5) +#define UCSI_CONCAP_OPMODE_USB3 BIT(6) +#define UCSI_CONCAP_OPMODE_ALT_MODE BIT(7) + u8 provider:1; + u8 consumer:1; +} __packed; + +/* Data structure filled by PPM in response to GET_CABLE_PROPERTY command. */ +struct ucsi_cable_property { + u16 speed_supported; + u8 current_capability; + u8 vbus_in_cable:1; + u8 active_cable:1; + u8 directionality:1; + u8 plug_type:2; +#define UCSI_CABLE_PROPERTY_PLUG_TYPE_A 0 +#define UCSI_CABLE_PROPERTY_PLUG_TYPE_B 1 +#define UCSI_CABLE_PROPERTY_PLUG_TYPE_C 2 +#define UCSI_CABLE_PROPERTY_PLUG_OTHER 3 + u8 mode_support:1; + u8 RESERVED_2:2; + u8 latency:4; + u8 RESERVED_4:4; +} __packed; + +/* Data structure filled by PPM in response to GET_CONNECTOR_STATUS command. */ +struct ucsi_connector_status { + u16 change; +#define UCSI_CONSTAT_EXT_SUPPLY_CHANGE BIT(1) +#define UCSI_CONSTAT_POWER_OPMODE_CHANGE BIT(2) +#define UCSI_CONSTAT_PDOS_CHANGE BIT(5) +#define UCSI_CONSTAT_POWER_LEVEL_CHANGE BIT(6) +#define UCSI_CONSTAT_PD_RESET_COMPLETE BIT(7) +#define UCSI_CONSTAT_CAM_CHANGE BIT(8) +#define UCSI_CONSTAT_BC_CHANGE BIT(9) +#define UCSI_CONSTAT_PARTNER_CHANGE BIT(11) +#define UCSI_CONSTAT_POWER_DIR_CHANGE BIT(12) +#define UCSI_CONSTAT_CONNECT_CHANGE BIT(14) +#define UCSI_CONSTAT_ERROR BIT(15) + u16 pwr_op_mode:3; +#define UCSI_CONSTAT_PWR_OPMODE_NONE 0 +#define UCSI_CONSTAT_PWR_OPMODE_DEFAULT 1 +#define UCSI_CONSTAT_PWR_OPMODE_BC 2 +#define UCSI_CONSTAT_PWR_OPMODE_PD 3 +#define UCSI_CONSTAT_PWR_OPMODE_TYPEC1_3 4 +#define UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0 5 + u16 connected:1; + u16 pwr_dir:1; + u16 partner_flags:8; +#define UCSI_CONSTAT_PARTNER_FLAG_USB BIT(0) +#define UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE BIT(1) + u16 partner_type:3; +#define UCSI_CONSTAT_PARTNER_TYPE_DFP 1 +#define UCSI_CONSTAT_PARTNER_TYPE_UFP 2 +#define UCSI_CONSTAT_PARTNER_TYPE_CABLE_NO_UFP 3 /* Powered Cable */ +#define UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP 4 /* Powered Cable */ +#define UCSI_CONSTAT_PARTNER_TYPE_DEBUG 5 +#define UCSI_CONSTAT_PARTNER_TYPE_AUDIO 6 + u32 request_data_obj; + u8 bc_status:2; +#define UCSI_CONSTAT_BC_NOT_CHARGING 0 +#define UCSI_CONSTAT_BC_NOMINAL_CHARGING 1 +#define UCSI_CONSTAT_BC_SLOW_CHARGING 2 +#define UCSI_CONSTAT_BC_TRICKLE_CHARGING 3 + u8 provider_cap_limit_reason:4; +#define UCSI_CONSTAT_CAP_PWR_LOWERED 0 +#define UCSI_CONSTAT_CAP_PWR_BUDGET_LIMIT 1 + u8 RESERVED:2; +} __packed; + +/* -------------------------------------------------------------------------- */ + diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 92fdb6e9faff..6b978f04b8d7 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -287,6 +287,9 @@ static struct urb *usbtest_alloc_urb( if (usb_pipein(pipe)) urb->transfer_flags |= URB_SHORT_NOT_OK; + if ((bytes + offset) == 0) + return urb; + if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) urb->transfer_buffer = usb_alloc_coherent(udev, bytes + offset, GFP_KERNEL, &urb->transfer_dma); @@ -529,6 +532,7 @@ static struct scatterlist * alloc_sglist(int nents, int max, int vary, struct usbtest_dev *dev, int pipe) { struct scatterlist *sg; + unsigned int n_size = 0; unsigned i; unsigned size = max; unsigned maxpacket = @@ -561,7 +565,8 @@ alloc_sglist(int nents, int max, int vary, struct usbtest_dev *dev, int pipe) break; case 1: for (j = 0; j < size; j++) - *buf++ = (u8) ((j % maxpacket) % 63); + *buf++ = (u8) (((j + n_size) % maxpacket) % 63); + n_size += size; break; } |