diff options
Diffstat (limited to 'drivers/usb/host/ehci.h')
| -rw-r--r-- | drivers/usb/host/ehci.h | 161 |
1 files changed, 10 insertions, 151 deletions
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 5799298364fb..b11798d17ae5 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -99,6 +99,8 @@ struct ehci_hcd { /* one per controller */ owned by the companion during a bus suspend */ unsigned long port_c_suspend; /* which ports have the change-suspend feature turned on */ + unsigned long suspended_ports; /* which ports are + suspended */ /* per-HC memory pools (could be per-bus, but ...) */ struct dma_pool *qh_pool; /* qh per active urb */ @@ -181,14 +183,16 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) * the async ring; just the I/O watchdog. Note that if a * SHRINK were pending, OFF would never be requested. */ - if (timer_pending(&ehci->watchdog) - && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) - & ehci->actions)) - return; + enum ehci_timer_action oldactions = ehci->actions; if (!test_and_set_bit (action, &ehci->actions)) { unsigned long t; + if (timer_pending(&ehci->watchdog) + && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) + & oldactions)) + return; + switch (action) { case TIMER_IO_WATCHDOG: t = EHCI_IO_JIFFIES; @@ -204,149 +208,13 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1; break; } - mod_timer(&ehci->watchdog, t + jiffies); + mod_timer(&ehci->watchdog, round_jiffies(t + jiffies)); } } /*-------------------------------------------------------------------------*/ -/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ - -/* Section 2.2 Host Controller Capability Registers */ -struct ehci_caps { - /* these fields are specified as 8 and 16 bit registers, - * but some hosts can't perform 8 or 16 bit PCI accesses. - */ - u32 hc_capbase; -#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ -#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ - u32 hcs_params; /* HCSPARAMS - offset 0x4 */ -#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ -#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ -#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ -#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ -#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ -#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ -#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ - - u32 hcc_params; /* HCCPARAMS - offset 0x8 */ -#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ -#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ -#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ -#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ -#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ -#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ - u8 portroute [8]; /* nibbles for routing - offset 0xC */ -} __attribute__ ((packed)); - - -/* Section 2.3 Host Controller Operational Registers */ -struct ehci_regs { - - /* USBCMD: offset 0x00 */ - u32 command; -/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ -#define CMD_PARK (1<<11) /* enable "park" on async qh */ -#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ -#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ -#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ -#define CMD_ASE (1<<5) /* async schedule enable */ -#define CMD_PSE (1<<4) /* periodic schedule enable */ -/* 3:2 is periodic frame list size */ -#define CMD_RESET (1<<1) /* reset HC not bus */ -#define CMD_RUN (1<<0) /* start/stop HC */ - - /* USBSTS: offset 0x04 */ - u32 status; -#define STS_ASS (1<<15) /* Async Schedule Status */ -#define STS_PSS (1<<14) /* Periodic Schedule Status */ -#define STS_RECL (1<<13) /* Reclamation */ -#define STS_HALT (1<<12) /* Not running (any reason) */ -/* some bits reserved */ - /* these STS_* flags are also intr_enable bits (USBINTR) */ -#define STS_IAA (1<<5) /* Interrupted on async advance */ -#define STS_FATAL (1<<4) /* such as some PCI access errors */ -#define STS_FLR (1<<3) /* frame list rolled over */ -#define STS_PCD (1<<2) /* port change detect */ -#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ -#define STS_INT (1<<0) /* "normal" completion (short, ...) */ - - /* USBINTR: offset 0x08 */ - u32 intr_enable; - - /* FRINDEX: offset 0x0C */ - u32 frame_index; /* current microframe number */ - /* CTRLDSSEGMENT: offset 0x10 */ - u32 segment; /* address bits 63:32 if needed */ - /* PERIODICLISTBASE: offset 0x14 */ - u32 frame_list; /* points to periodic list */ - /* ASYNCLISTADDR: offset 0x18 */ - u32 async_next; /* address of next async queue head */ - - u32 reserved [9]; - - /* CONFIGFLAG: offset 0x40 */ - u32 configured_flag; -#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ - - /* PORTSC: offset 0x44 */ - u32 port_status [0]; /* up to N_PORTS */ -/* 31:23 reserved */ -#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ -#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ -#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ -/* 19:16 for port testing */ -#define PORT_LED_OFF (0<<14) -#define PORT_LED_AMBER (1<<14) -#define PORT_LED_GREEN (2<<14) -#define PORT_LED_MASK (3<<14) -#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ -#define PORT_POWER (1<<12) /* true: has power (see PPC) */ -#define PORT_USB11(x) (((x)&(3<<10))==(1<<10)) /* USB 1.1 device */ -/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ -/* 9 reserved */ -#define PORT_RESET (1<<8) /* reset port */ -#define PORT_SUSPEND (1<<7) /* suspend port */ -#define PORT_RESUME (1<<6) /* resume it */ -#define PORT_OCC (1<<5) /* over current change */ -#define PORT_OC (1<<4) /* over current active */ -#define PORT_PEC (1<<3) /* port enable change */ -#define PORT_PE (1<<2) /* port enable */ -#define PORT_CSC (1<<1) /* connect status change */ -#define PORT_CONNECT (1<<0) /* device connected */ -#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -} __attribute__ ((packed)); - -#define USBMODE 0x68 /* USB Device mode */ -#define USBMODE_SDIS (1<<3) /* Stream disable */ -#define USBMODE_BE (1<<2) /* BE/LE endianness select */ -#define USBMODE_CM_HC (3<<0) /* host controller mode */ -#define USBMODE_CM_IDLE (0<<0) /* idle state */ - -/* Appendix C, Debug port ... intended for use with special "debug devices" - * that can help if there's no serial console. (nonstandard enumeration.) - */ -struct ehci_dbg_port { - u32 control; -#define DBGP_OWNER (1<<30) -#define DBGP_ENABLED (1<<28) -#define DBGP_DONE (1<<16) -#define DBGP_INUSE (1<<10) -#define DBGP_ERRCODE(x) (((x)>>7)&0x07) -# define DBGP_ERR_BAD 1 -# define DBGP_ERR_SIGNAL 2 -#define DBGP_ERROR (1<<6) -#define DBGP_GO (1<<5) -#define DBGP_OUT (1<<4) -#define DBGP_LEN(x) (((x)>>0)&0x0f) - u32 pids; -#define DBGP_PID_GET(x) (((x)>>16)&0xff) -#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok)) - u32 data03; - u32 data47; - u32 address; -#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep)) -} __attribute__ ((packed)); +#include <linux/usb/ehci_def.h> /*-------------------------------------------------------------------------*/ @@ -740,16 +608,7 @@ ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) /* * Big-endian read/write functions are arch-specific. * Other arches can be added if/when they're needed. - * - * REVISIT: arch/powerpc now has readl/writel_be, so the - * definition below can die once the 4xx support is - * finally ported over. */ -#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE) -#define readl_be(addr) in_be32((__force unsigned *)addr) -#define writel_be(val, addr) out_be32((__force unsigned *)addr, val) -#endif - #if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX) #define readl_be(addr) __raw_readl((__force unsigned *)addr) #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) |