diff options
Diffstat (limited to 'drivers/usb/gadget/udc/pch_udc.c')
| -rw-r--r-- | drivers/usb/gadget/udc/pch_udc.c | 241 |
1 files changed, 117 insertions, 124 deletions
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c index a3c1fc924268..9bb7a9d7a2fb 100644 --- a/drivers/usb/gadget/udc/pch_udc.c +++ b/drivers/usb/gadget/udc/pch_udc.c @@ -8,11 +8,12 @@ #include <linux/pci.h> #include <linux/delay.h> #include <linux/errno.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> #include <linux/list.h> #include <linux/interrupt.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -#include <linux/gpio/consumer.h> #include <linux/irq.h> #define PCH_VBUS_PERIOD 3000 /* VBUS polling period (msec) */ @@ -331,6 +332,7 @@ struct pch_vbus_gpio_data { * @dma_addr: DMA pool for received * @setup_data: Received setup data * @base_addr: for mapped device memory + * @bar: PCI BAR used for mapped device memory * @cfg_data: current cfg, intf, and alt in use * @vbus_gpio: GPIO informaton for detecting VBUS */ @@ -353,6 +355,7 @@ struct pch_udc_dev { dma_addr_t dma_addr; struct usb_ctrlrequest setup_data; void __iomem *base_addr; + unsigned short bar; struct pch_udc_cfg_data cfg_data; struct pch_vbus_gpio_data vbus_gpio; }; @@ -381,11 +384,8 @@ MODULE_PARM_DESC(speed_fs, "true for Full speed operation"); * @td_data_last: last dma desc. of chain * @queue: associated queue * @dma_going: DMA in progress for request - * @dma_mapped: DMA memory mapped for request * @dma_done: DMA completed for request * @chain_len: chain length - * @buf: Buffer memory for align adjustment - * @dma: DMA memory for align adjustment */ struct pch_udc_request { struct usb_request req; @@ -394,11 +394,8 @@ struct pch_udc_request { struct pch_udc_data_dma_desc *td_data_last; struct list_head queue; unsigned dma_going:1, - dma_mapped:1, dma_done:1; unsigned chain_len; - void *buf; - dma_addr_t dma; }; static inline u32 pch_udc_readl(struct pch_udc_dev *dev, unsigned long reg) @@ -563,12 +560,13 @@ static void pch_udc_clear_disconnect(struct pch_udc_dev *dev) pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES); } +static void pch_udc_init(struct pch_udc_dev *dev); + /** * pch_udc_reconnect() - This API initializes usb device controller, * and clear the disconnect status. * @dev: Reference to pch_udc_regs structure */ -static void pch_udc_init(struct pch_udc_dev *dev); static void pch_udc_reconnect(struct pch_udc_dev *dev) { pch_udc_init(dev); @@ -596,18 +594,22 @@ static void pch_udc_reconnect(struct pch_udc_dev *dev) static inline void pch_udc_vbus_session(struct pch_udc_dev *dev, int is_active) { + unsigned long iflags; + + spin_lock_irqsave(&dev->lock, iflags); if (is_active) { pch_udc_reconnect(dev); dev->vbus_session = 1; } else { if (dev->driver && dev->driver->disconnect) { - spin_lock(&dev->lock); + spin_unlock_irqrestore(&dev->lock, iflags); dev->driver->disconnect(&dev->gadget); - spin_unlock(&dev->lock); + spin_lock_irqsave(&dev->lock, iflags); } pch_udc_set_disconnect(dev); dev->vbus_session = 0; } + spin_unlock_irqrestore(&dev->lock, iflags); } /** @@ -1166,20 +1168,25 @@ static int pch_udc_pcd_selfpowered(struct usb_gadget *gadget, int value) static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on) { struct pch_udc_dev *dev; + unsigned long iflags; if (!gadget) return -EINVAL; + dev = container_of(gadget, struct pch_udc_dev, gadget); + + spin_lock_irqsave(&dev->lock, iflags); if (is_on) { pch_udc_reconnect(dev); } else { if (dev->driver && dev->driver->disconnect) { - spin_lock(&dev->lock); + spin_unlock_irqrestore(&dev->lock, iflags); dev->driver->disconnect(&dev->gadget); - spin_unlock(&dev->lock); + spin_lock_irqsave(&dev->lock, iflags); } pch_udc_set_disconnect(dev); } + spin_unlock_irqrestore(&dev->lock, iflags); return 0; } @@ -1360,6 +1367,7 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data) */ static int pch_vbus_gpio_init(struct pch_udc_dev *dev) { + struct device *d = &dev->pdev->dev; int err; int irq_num = 0; struct gpio_desc *gpiod; @@ -1368,7 +1376,7 @@ static int pch_vbus_gpio_init(struct pch_udc_dev *dev) dev->vbus_gpio.intr = 0; /* Retrieve the GPIO line from the USB gadget device */ - gpiod = devm_gpiod_get(dev->gadget.dev.parent, NULL, GPIOD_IN); + gpiod = devm_gpiod_get_optional(d, NULL, GPIOD_IN); if (IS_ERR(gpiod)) return PTR_ERR(gpiod); gpiod_set_consumer_name(gpiod, "pch_vbus"); @@ -1428,33 +1436,7 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req, status = req->req.status; dev = ep->dev; - if (req->dma_mapped) { - if (req->dma == DMA_ADDR_INVALID) { - if (ep->in) - dma_unmap_single(&dev->pdev->dev, req->req.dma, - req->req.length, - DMA_TO_DEVICE); - else - dma_unmap_single(&dev->pdev->dev, req->req.dma, - req->req.length, - DMA_FROM_DEVICE); - req->req.dma = DMA_ADDR_INVALID; - } else { - if (ep->in) - dma_unmap_single(&dev->pdev->dev, req->dma, - req->req.length, - DMA_TO_DEVICE); - else { - dma_unmap_single(&dev->pdev->dev, req->dma, - req->req.length, - DMA_FROM_DEVICE); - memcpy(req->req.buf, req->buf, req->req.length); - } - kfree(req->buf); - req->dma = DMA_ADDR_INVALID; - } - req->dma_mapped = 0; - } + usb_gadget_unmap_request(&dev->gadget, &req->req, ep->in); ep->halted = 1; spin_unlock(&dev->lock); if (!ep->in) @@ -1532,12 +1514,9 @@ static int pch_udc_create_dma_chain(struct pch_udc_ep *ep, if (req->chain_len > 1) pch_udc_free_dma_chain(ep->dev, req); - if (req->dma == DMA_ADDR_INVALID) - td->dataptr = req->req.dma; - else - td->dataptr = req->dma; - + td->dataptr = req->req.dma; td->status = PCH_UDC_BS_HST_BSY; + for (; ; bytes -= buf_len, ++len) { td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes); if (bytes <= buf_len) @@ -1743,7 +1722,6 @@ static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep, if (!req) return NULL; req->req.dma = DMA_ADDR_INVALID; - req->dma = DMA_ADDR_INVALID; INIT_LIST_HEAD(&req->queue); if (!ep->dev->dma_addr) return &req->req; @@ -1756,7 +1734,7 @@ static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep, } /* prevent from using desc. - set HOST BUSY */ dma_desc->status |= PCH_UDC_BS_HST_BSY; - dma_desc->dataptr = cpu_to_le32(DMA_ADDR_INVALID); + dma_desc->dataptr = lower_32_bits(DMA_ADDR_INVALID); req->td_data = dma_desc; req->td_data_last = dma_desc; req->chain_len = 1; @@ -1826,39 +1804,9 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, return -ESHUTDOWN; spin_lock_irqsave(&dev->lock, iflags); /* map the buffer for dma */ - if (usbreq->length && - ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) { - if (!((unsigned long)(usbreq->buf) & 0x03)) { - if (ep->in) - usbreq->dma = dma_map_single(&dev->pdev->dev, - usbreq->buf, - usbreq->length, - DMA_TO_DEVICE); - else - usbreq->dma = dma_map_single(&dev->pdev->dev, - usbreq->buf, - usbreq->length, - DMA_FROM_DEVICE); - } else { - req->buf = kzalloc(usbreq->length, GFP_ATOMIC); - if (!req->buf) { - retval = -ENOMEM; - goto probe_end; - } - if (ep->in) { - memcpy(req->buf, usbreq->buf, usbreq->length); - req->dma = dma_map_single(&dev->pdev->dev, - req->buf, - usbreq->length, - DMA_TO_DEVICE); - } else - req->dma = dma_map_single(&dev->pdev->dev, - req->buf, - usbreq->length, - DMA_FROM_DEVICE); - } - req->dma_mapped = 1; - } + retval = usb_gadget_map_request(&dev->gadget, usbreq, ep->in); + if (retval) + goto probe_end; if (usbreq->length > 0) { retval = prepare_dma(ep, req, GFP_ATOMIC); if (retval) @@ -2298,6 +2246,21 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num) pch_udc_set_dma(dev, DMA_DIR_RX); } +static int pch_udc_gadget_setup(struct pch_udc_dev *dev) + __must_hold(&dev->lock) +{ + int rc; + + /* In some cases we can get an interrupt before driver gets setup */ + if (!dev->driver) + return -ESHUTDOWN; + + spin_unlock(&dev->lock); + rc = dev->driver->setup(&dev->gadget, &dev->setup_data); + spin_lock(&dev->lock); + return rc; +} + /** * pch_udc_svc_control_in() - Handle Control IN endpoint interrupts * @dev: Reference to the device structure @@ -2369,15 +2332,12 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev) dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep; else /* OUT */ dev->gadget.ep0 = &ep->ep; - spin_lock(&dev->lock); /* If Mass storage Reset */ if ((dev->setup_data.bRequestType == 0x21) && (dev->setup_data.bRequest == 0xFF)) dev->prot_stall = 0; /* call gadget with setup data received */ - setup_supported = dev->driver->setup(&dev->gadget, - &dev->setup_data); - spin_unlock(&dev->lock); + setup_supported = pch_udc_gadget_setup(dev); if (dev->setup_data.bRequestType & USB_DIR_IN) { ep->td_data->status = (ep->td_data->status & @@ -2625,9 +2585,7 @@ static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev) dev->ep[i].halted = 0; } dev->stall = 0; - spin_unlock(&dev->lock); - dev->driver->setup(&dev->gadget, &dev->setup_data); - spin_lock(&dev->lock); + pch_udc_gadget_setup(dev); } /** @@ -2662,9 +2620,7 @@ static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev) dev->stall = 0; /* call gadget zero with setup data received */ - spin_unlock(&dev->lock); - dev->driver->setup(&dev->gadget, &dev->setup_data); - spin_lock(&dev->lock); + pch_udc_gadget_setup(dev); } /** @@ -2870,14 +2826,20 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev) * @dev: Reference to the driver structure * * Return codes: - * 0: Success + * 0: Success + * -ERRNO: All kind of errors when retrieving VBUS GPIO */ static int pch_udc_pcd_init(struct pch_udc_dev *dev) { + int ret; + pch_udc_init(dev); pch_udc_pcd_reinit(dev); - pch_vbus_gpio_init(dev); - return 0; + + ret = pch_vbus_gpio_init(dev); + if (ret) + pch_udc_exit(dev); + return ret; } /** @@ -2938,7 +2900,7 @@ static int init_dma_pools(struct pch_udc_dev *dev) dev->dma_addr = dma_map_single(&dev->pdev->dev, ep0out_buf, UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE); - return 0; + return dma_mapping_error(&dev->pdev->dev, dev->dma_addr); } static int pch_udc_start(struct usb_gadget *g, @@ -2976,6 +2938,38 @@ static int pch_udc_stop(struct usb_gadget *g) return 0; } +static void pch_vbus_gpio_remove_table(void *table) +{ + gpiod_remove_lookup_table(table); +} + +static int pch_vbus_gpio_add_table(struct device *d, void *table) +{ + gpiod_add_lookup_table(table); + return devm_add_action_or_reset(d, pch_vbus_gpio_remove_table, table); +} + +static struct gpiod_lookup_table pch_udc_minnow_vbus_gpio_table = { + .dev_id = "0000:02:02.4", + .table = { + GPIO_LOOKUP("sch_gpio.33158", 12, NULL, GPIO_ACTIVE_HIGH), + {} + }, +}; + +static int pch_udc_minnow_platform_init(struct device *d) +{ + return pch_vbus_gpio_add_table(d, &pch_udc_minnow_vbus_gpio_table); +} + +static int pch_udc_quark_platform_init(struct device *d) +{ + struct pch_udc_dev *dev = dev_get_drvdata(d); + + dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000; + return 0; +} + static void pch_udc_shutdown(struct pci_dev *pdev) { struct pch_udc_dev *dev = pci_get_drvdata(pdev); @@ -3024,8 +3018,7 @@ static void pch_udc_remove(struct pci_dev *pdev) pch_udc_exit(dev); } -#ifdef CONFIG_PM_SLEEP -static int pch_udc_suspend(struct device *d) +static int __maybe_unused pch_udc_suspend(struct device *d) { struct pch_udc_dev *dev = dev_get_drvdata(d); @@ -3035,21 +3028,18 @@ static int pch_udc_suspend(struct device *d) return 0; } -static int pch_udc_resume(struct device *d) +static int __maybe_unused pch_udc_resume(struct device *d) { return 0; } static SIMPLE_DEV_PM_OPS(pch_udc_pm, pch_udc_suspend, pch_udc_resume); -#define PCH_UDC_PM_OPS (&pch_udc_pm) -#else -#define PCH_UDC_PM_OPS NULL -#endif /* CONFIG_PM_SLEEP */ -static int pch_udc_probe(struct pci_dev *pdev, - const struct pci_device_id *id) +typedef int (*platform_init_fn)(struct device *); + +static int pch_udc_probe(struct pci_dev *pdev, const struct pci_device_id *id) { - int bar; + platform_init_fn platform_init = (platform_init_fn)id->driver_data; int retval; struct pch_udc_dev *dev; @@ -3063,31 +3053,28 @@ static int pch_udc_probe(struct pci_dev *pdev, if (retval) return retval; + dev->bar = PCH_UDC_PCI_BAR; + dev->pdev = pdev; pci_set_drvdata(pdev, dev); - /* Determine BAR based on PCI ID */ - if (id->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC) - bar = PCH_UDC_PCI_BAR_QUARK_X1000; - else - bar = PCH_UDC_PCI_BAR; + /* Platform specific hook */ + if (platform_init) { + retval = platform_init(&pdev->dev); + if (retval) + return retval; + } /* PCI resource allocation */ - retval = pcim_iomap_regions(pdev, 1 << bar, pci_name(pdev)); + retval = pcim_iomap_regions(pdev, BIT(dev->bar), pci_name(pdev)); if (retval) return retval; - dev->base_addr = pcim_iomap_table(pdev)[bar]; - - /* - * FIXME: add a GPIO descriptor table to pdev.dev using - * gpiod_add_descriptor_table() from <linux/gpio/machine.h> based on - * the PCI subsystem ID. The system-dependent GPIO is necessary for - * VBUS operation. - */ + dev->base_addr = pcim_iomap_table(pdev)[dev->bar]; /* initialize the hardware */ - if (pch_udc_pcd_init(dev)) - return -ENODEV; + retval = pch_udc_pcd_init(dev); + if (retval) + return retval; pci_enable_msi(pdev); @@ -3104,7 +3091,6 @@ static int pch_udc_probe(struct pci_dev *pdev, /* device struct setup */ spin_lock_init(&dev->lock); - dev->pdev = pdev; dev->gadget.ops = &pch_udc_ops; retval = init_dma_pools(dev); @@ -3128,10 +3114,17 @@ finished: static const struct pci_device_id pch_udc_pcidev_id[] = { { - PCI_DEVICE(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC), + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC), + .class = PCI_CLASS_SERIAL_USB_DEVICE, + .class_mask = 0xffffffff, + .driver_data = (kernel_ulong_t)&pch_udc_quark_platform_init, + }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC, + PCI_VENDOR_ID_CIRCUITCO, PCI_SUBSYSTEM_ID_CIRCUITCO_MINNOWBOARD), .class = PCI_CLASS_SERIAL_USB_DEVICE, .class_mask = 0xffffffff, + .driver_data = (kernel_ulong_t)&pch_udc_minnow_platform_init, }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC), @@ -3160,7 +3153,7 @@ static struct pci_driver pch_udc_driver = { .remove = pch_udc_remove, .shutdown = pch_udc_shutdown, .driver = { - .pm = PCH_UDC_PM_OPS, + .pm = &pch_udc_pm, }, }; |