diff options
Diffstat (limited to 'drivers/tty/serial/clps711x.c')
-rw-r--r-- | drivers/tty/serial/clps711x.c | 448 |
1 files changed, 254 insertions, 194 deletions
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index 8d0b994357c8..4f59f1cb9116 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -21,44 +21,66 @@ #include <linux/console.h> #include <linux/serial_core.h> #include <linux/serial.h> -#include <linux/io.h> #include <linux/clk.h> +#include <linux/io.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/ioport.h> +#include <linux/of.h> #include <linux/platform_device.h> +#include <linux/regmap.h> -#include <mach/hardware.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/clps711x.h> -#define UART_CLPS711X_NAME "uart-clps711x" +#define UART_CLPS711X_DEVNAME "ttyCL" #define UART_CLPS711X_NR 2 #define UART_CLPS711X_MAJOR 204 #define UART_CLPS711X_MINOR 40 -#define UBRLCR(port) ((port)->line ? UBRLCR2 : UBRLCR1) -#define UARTDR(port) ((port)->line ? UARTDR2 : UARTDR1) -#define SYSFLG(port) ((port)->line ? SYSFLG2 : SYSFLG1) -#define SYSCON(port) ((port)->line ? SYSCON2 : SYSCON1) -#define TX_IRQ(port) ((port)->line ? IRQ_UTXINT2 : IRQ_UTXINT1) -#define RX_IRQ(port) ((port)->line ? IRQ_URXINT2 : IRQ_URXINT1) +#define UARTDR_OFFSET (0x00) +#define UBRLCR_OFFSET (0x40) + +#define UARTDR_FRMERR (1 << 8) +#define UARTDR_PARERR (1 << 9) +#define UARTDR_OVERR (1 << 10) + +#define UBRLCR_BAUD_MASK ((1 << 12) - 1) +#define UBRLCR_BREAK (1 << 12) +#define UBRLCR_PRTEN (1 << 13) +#define UBRLCR_EVENPRT (1 << 14) +#define UBRLCR_XSTOP (1 << 15) +#define UBRLCR_FIFOEN (1 << 16) +#define UBRLCR_WRDLEN5 (0 << 17) +#define UBRLCR_WRDLEN6 (1 << 17) +#define UBRLCR_WRDLEN7 (2 << 17) +#define UBRLCR_WRDLEN8 (3 << 17) +#define UBRLCR_WRDLEN_MASK (3 << 17) struct clps711x_port { - struct uart_driver uart; - struct clk *uart_clk; - struct uart_port port[UART_CLPS711X_NR]; - int tx_enabled[UART_CLPS711X_NR]; -#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE - struct console console; -#endif + struct uart_port port; + unsigned int tx_enabled; + int rx_irq; + struct regmap *syscon; + bool use_ms; +}; + +static struct uart_driver clps711x_uart = { + .owner = THIS_MODULE, + .driver_name = UART_CLPS711X_DEVNAME, + .dev_name = UART_CLPS711X_DEVNAME, + .major = UART_CLPS711X_MAJOR, + .minor = UART_CLPS711X_MINOR, + .nr = UART_CLPS711X_NR, }; static void uart_clps711x_stop_tx(struct uart_port *port) { struct clps711x_port *s = dev_get_drvdata(port->dev); - if (s->tx_enabled[port->line]) { - disable_irq(TX_IRQ(port)); - s->tx_enabled[port->line] = 0; + if (s->tx_enabled) { + disable_irq(port->irq); + s->tx_enabled = 0; } } @@ -66,33 +88,26 @@ static void uart_clps711x_start_tx(struct uart_port *port) { struct clps711x_port *s = dev_get_drvdata(port->dev); - if (!s->tx_enabled[port->line]) { - enable_irq(TX_IRQ(port)); - s->tx_enabled[port->line] = 1; + if (!s->tx_enabled) { + s->tx_enabled = 1; + enable_irq(port->irq); } } -static void uart_clps711x_stop_rx(struct uart_port *port) -{ - disable_irq(RX_IRQ(port)); -} - -static void uart_clps711x_enable_ms(struct uart_port *port) -{ - /* Do nothing */ -} - static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id) { struct uart_port *port = dev_id; - unsigned int status, ch, flg; + struct clps711x_port *s = dev_get_drvdata(port->dev); + unsigned int status, flg; + u32 sysflg; + u16 ch; for (;;) { - status = clps_readl(SYSFLG(port)); - if (status & SYSFLG_URXFE) + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + if (sysflg & SYSFLG_URXFE) break; - ch = clps_readw(UARTDR(port)); + ch = readw_relaxed(port->membase + UARTDR_OFFSET); status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR); ch &= 0xff; @@ -136,25 +151,31 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id) struct uart_port *port = dev_id; struct clps711x_port *s = dev_get_drvdata(port->dev); struct circ_buf *xmit = &port->state->xmit; + u32 sysflg; if (port->x_char) { - clps_writew(port->x_char, UARTDR(port)); + writew_relaxed(port->x_char, port->membase + UARTDR_OFFSET); port->icount.tx++; port->x_char = 0; return IRQ_HANDLED; } if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - disable_irq_nosync(TX_IRQ(port)); - s->tx_enabled[port->line] = 0; + if (s->tx_enabled) { + disable_irq_nosync(port->irq); + s->tx_enabled = 0; + } return IRQ_HANDLED; } while (!uart_circ_empty(xmit)) { - clps_writew(xmit->buf[xmit->tail], UARTDR(port)); + writew_relaxed(xmit->buf[xmit->tail], + port->membase + UARTDR_OFFSET); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; - if (clps_readl(SYSFLG(port) & SYSFLG_UTXFF)) + + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + if (sysflg & SYSFLG_UTXFF) break; } @@ -166,20 +187,27 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id) static unsigned int uart_clps711x_tx_empty(struct uart_port *port) { - return (clps_readl(SYSFLG(port) & SYSFLG_UBUSY)) ? 0 : TIOCSER_TEMT; + struct clps711x_port *s = dev_get_drvdata(port->dev); + u32 sysflg; + + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + + return (sysflg & SYSFLG_UBUSY) ? 0 : TIOCSER_TEMT; } static unsigned int uart_clps711x_get_mctrl(struct uart_port *port) { - unsigned int status, result = 0; + struct clps711x_port *s = dev_get_drvdata(port->dev); + unsigned int result = 0; + u32 sysflg; - if (port->line == 0) { - status = clps_readl(SYSFLG1); - if (status & SYSFLG1_DCD) + if (s->use_ms) { + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + if (sysflg & SYSFLG1_DCD) result |= TIOCM_CAR; - if (status & SYSFLG1_DSR) + if (sysflg & SYSFLG1_DSR) result |= TIOCM_DSR; - if (status & SYSFLG1_CTS) + if (sysflg & SYSFLG1_CTS) result |= TIOCM_CTS; } else result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; @@ -194,65 +222,43 @@ static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl) static void uart_clps711x_break_ctl(struct uart_port *port, int break_state) { - unsigned long flags; unsigned int ubrlcr; - spin_lock_irqsave(&port->lock, flags); - - ubrlcr = clps_readl(UBRLCR(port)); + ubrlcr = readl_relaxed(port->membase + UBRLCR_OFFSET); if (break_state) ubrlcr |= UBRLCR_BREAK; else ubrlcr &= ~UBRLCR_BREAK; - clps_writel(ubrlcr, UBRLCR(port)); - - spin_unlock_irqrestore(&port->lock, flags); + writel_relaxed(ubrlcr, port->membase + UBRLCR_OFFSET); } static int uart_clps711x_startup(struct uart_port *port) { struct clps711x_port *s = dev_get_drvdata(port->dev); - int ret; - - s->tx_enabled[port->line] = 1; - /* Allocate the IRQs */ - ret = devm_request_irq(port->dev, TX_IRQ(port), uart_clps711x_int_tx, - 0, UART_CLPS711X_NAME " TX", port); - if (ret) - return ret; - - ret = devm_request_irq(port->dev, RX_IRQ(port), uart_clps711x_int_rx, - 0, UART_CLPS711X_NAME " RX", port); - if (ret) { - devm_free_irq(port->dev, TX_IRQ(port), port); - return ret; - } /* Disable break */ - clps_writel(clps_readl(UBRLCR(port)) & ~UBRLCR_BREAK, UBRLCR(port)); + writel_relaxed(readl_relaxed(port->membase + UBRLCR_OFFSET) & + ~UBRLCR_BREAK, port->membase + UBRLCR_OFFSET); /* Enable the port */ - clps_writel(clps_readl(SYSCON(port)) | SYSCON_UARTEN, SYSCON(port)); - - return 0; + return regmap_update_bits(s->syscon, SYSCON_OFFSET, + SYSCON_UARTEN, SYSCON_UARTEN); } static void uart_clps711x_shutdown(struct uart_port *port) { - /* Free the interrupts */ - devm_free_irq(port->dev, TX_IRQ(port), port); - devm_free_irq(port->dev, RX_IRQ(port), port); + struct clps711x_port *s = dev_get_drvdata(port->dev); /* Disable the port */ - clps_writel(clps_readl(SYSCON(port)) & ~SYSCON_UARTEN, SYSCON(port)); + regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0); } static void uart_clps711x_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - unsigned int ubrlcr, baud, quot; - unsigned long flags; + u32 ubrlcr; + unsigned int baud, quot; /* Mask termios capabilities we don't support */ termios->c_cflag &= ~CMSPAR; @@ -291,8 +297,6 @@ static void uart_clps711x_set_termios(struct uart_port *port, /* Enable FIFO */ ubrlcr |= UBRLCR_FIFOEN; - spin_lock_irqsave(&port->lock, flags); - /* Set read status mask */ port->read_status_mask = UARTDR_OVERR; if (termios->c_iflag & INPCK) @@ -306,9 +310,7 @@ static void uart_clps711x_set_termios(struct uart_port *port, uart_update_timeout(port, termios->c_cflag, baud); - clps_writel(ubrlcr | (quot - 1), UBRLCR(port)); - - spin_unlock_irqrestore(&port->lock, flags); + writel_relaxed(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET); } static const char *uart_clps711x_type(struct uart_port *port) @@ -322,14 +324,12 @@ static void uart_clps711x_config_port(struct uart_port *port, int flags) port->type = PORT_CLPS711X; } -static void uart_clps711x_release_port(struct uart_port *port) +static void uart_clps711x_nop_void(struct uart_port *port) { - /* Do nothing */ } -static int uart_clps711x_request_port(struct uart_port *port) +static int uart_clps711x_nop_int(struct uart_port *port) { - /* Do nothing */ return 0; } @@ -339,181 +339,241 @@ static const struct uart_ops uart_clps711x_ops = { .get_mctrl = uart_clps711x_get_mctrl, .stop_tx = uart_clps711x_stop_tx, .start_tx = uart_clps711x_start_tx, - .stop_rx = uart_clps711x_stop_rx, - .enable_ms = uart_clps711x_enable_ms, + .stop_rx = uart_clps711x_nop_void, + .enable_ms = uart_clps711x_nop_void, .break_ctl = uart_clps711x_break_ctl, .startup = uart_clps711x_startup, .shutdown = uart_clps711x_shutdown, .set_termios = uart_clps711x_set_termios, .type = uart_clps711x_type, .config_port = uart_clps711x_config_port, - .release_port = uart_clps711x_release_port, - .request_port = uart_clps711x_request_port, + .release_port = uart_clps711x_nop_void, + .request_port = uart_clps711x_nop_int, }; #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE static void uart_clps711x_console_putchar(struct uart_port *port, int ch) { - while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF) - barrier(); + struct clps711x_port *s = dev_get_drvdata(port->dev); + u32 sysflg; + + do { + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + } while (sysflg & SYSFLG_UTXFF); - clps_writew(ch, UARTDR(port)); + writew_relaxed(ch, port->membase + UARTDR_OFFSET); } static void uart_clps711x_console_write(struct console *co, const char *c, unsigned n) { - struct clps711x_port *s = (struct clps711x_port *)co->data; - struct uart_port *port = &s->port[co->index]; - u32 syscon; - - /* Ensure that the port is enabled */ - syscon = clps_readl(SYSCON(port)); - clps_writel(syscon | SYSCON_UARTEN, SYSCON(port)); + struct uart_port *port = clps711x_uart.state[co->index].uart_port; + struct clps711x_port *s = dev_get_drvdata(port->dev); + u32 sysflg; uart_console_write(port, c, n, uart_clps711x_console_putchar); /* Wait for transmitter to become empty */ - while (clps_readl(SYSFLG(port)) & SYSFLG_UBUSY) - barrier(); - - /* Restore the uart state */ - clps_writel(syscon, SYSCON(port)); + do { + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + } while (sysflg & SYSFLG_UBUSY); } -static void uart_clps711x_console_get_options(struct uart_port *port, - int *baud, int *parity, - int *bits) +static int uart_clps711x_console_setup(struct console *co, char *options) { - if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) { - unsigned int ubrlcr, quot; + int baud = 38400, bits = 8, parity = 'n', flow = 'n'; + int ret, index = co->index; + struct clps711x_port *s; + struct uart_port *port; + u32 ubrlcr, syscon; + unsigned int quot; - ubrlcr = clps_readl(UBRLCR(port)); + if (index < 0 || index >= UART_CLPS711X_NR) + return -EINVAL; - *parity = 'n'; - if (ubrlcr & UBRLCR_PRTEN) { - if (ubrlcr & UBRLCR_EVENPRT) - *parity = 'e'; - else - *parity = 'o'; - } + port = clps711x_uart.state[index].uart_port; + if (!port) + return -ENODEV; - if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7) - *bits = 7; - else - *bits = 8; + s = dev_get_drvdata(port->dev); - quot = ubrlcr & UBRLCR_BAUD_MASK; - *baud = port->uartclk / (16 * (quot + 1)); - } -} + if (!options) { + regmap_read(s->syscon, SYSCON_OFFSET, &syscon); + if (syscon & SYSCON_UARTEN) { + ubrlcr = readl_relaxed(port->membase + UBRLCR_OFFSET); -static int uart_clps711x_console_setup(struct console *co, char *options) -{ - int baud = 38400, bits = 8, parity = 'n', flow = 'n'; - struct clps711x_port *s = (struct clps711x_port *)co->data; - struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0]; + if (ubrlcr & UBRLCR_PRTEN) { + if (ubrlcr & UBRLCR_EVENPRT) + parity = 'e'; + else + parity = 'o'; + } - if (options) + if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7) + bits = 7; + + quot = ubrlcr & UBRLCR_BAUD_MASK; + baud = port->uartclk / (16 * (quot + 1)); + } + } else uart_parse_options(options, &baud, &parity, &bits, &flow); - else - uart_clps711x_console_get_options(port, &baud, &parity, &bits); - return uart_set_options(port, co, baud, parity, bits, flow); + ret = uart_set_options(port, co, baud, parity, bits, flow); + if (ret) + return ret; + + return regmap_update_bits(s->syscon, SYSCON_OFFSET, + SYSCON_UARTEN, SYSCON_UARTEN); } + +static struct console clps711x_console = { + .name = UART_CLPS711X_DEVNAME, + .device = uart_console_device, + .write = uart_clps711x_console_write, + .setup = uart_clps711x_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; #endif static int uart_clps711x_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; + int ret, index = np ? of_alias_get_id(np, "serial") : pdev->id; struct clps711x_port *s; - int ret, i; + struct resource *res; + struct clk *uart_clk; - s = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_port), GFP_KERNEL); - if (!s) { - dev_err(&pdev->dev, "Error allocating port structure\n"); + if (index < 0 || index >= UART_CLPS711X_NR) + return -EINVAL; + + s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); + if (!s) return -ENOMEM; + + uart_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(uart_clk)) + return PTR_ERR(uart_clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + s->port.membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(s->port.membase)) + return PTR_ERR(s->port.membase); + + s->port.irq = platform_get_irq(pdev, 0); + if (IS_ERR_VALUE(s->port.irq)) + return s->port.irq; + + s->rx_irq = platform_get_irq(pdev, 1); + if (IS_ERR_VALUE(s->rx_irq)) + return s->rx_irq; + + if (!np) { + char syscon_name[9]; + + sprintf(syscon_name, "syscon.%i", index + 1); + s->syscon = syscon_regmap_lookup_by_pdevname(syscon_name); + if (IS_ERR(s->syscon)) + return PTR_ERR(s->syscon); + + s->use_ms = !index; + } else { + s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(s->syscon)) + return PTR_ERR(s->syscon); + + if (!index) { + bool use_irda; + + s->use_ms = of_property_read_bool(np, "uart-use-ms"); + use_irda = of_property_read_bool(np, "uart-use-irda"); + regmap_update_bits(s->syscon, SYSCON_OFFSET, + SYSCON1_SIREN, + use_irda ? SYSCON1_SIREN : 0); + } } + + s->port.line = index; + s->port.dev = &pdev->dev; + s->port.iotype = UPIO_MEM32; + s->port.mapbase = res->start; + s->port.type = PORT_CLPS711X; + s->port.fifosize = 16; + s->port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; + s->port.uartclk = clk_get_rate(uart_clk); + s->port.ops = &uart_clps711x_ops; + platform_set_drvdata(pdev, s); - s->uart_clk = devm_clk_get(&pdev->dev, "uart"); - if (IS_ERR(s->uart_clk)) { - dev_err(&pdev->dev, "Can't get UART clocks\n"); - return PTR_ERR(s->uart_clk); - } + ret = uart_add_one_port(&clps711x_uart, &s->port); + if (ret) + return ret; - s->uart.owner = THIS_MODULE; - s->uart.dev_name = "ttyCL"; - s->uart.major = UART_CLPS711X_MAJOR; - s->uart.minor = UART_CLPS711X_MINOR; - s->uart.nr = UART_CLPS711X_NR; -#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE - s->uart.cons = &s->console; - s->uart.cons->device = uart_console_device; - s->uart.cons->write = uart_clps711x_console_write; - s->uart.cons->setup = uart_clps711x_console_setup; - s->uart.cons->flags = CON_PRINTBUFFER; - s->uart.cons->index = -1; - s->uart.cons->data = s; - strcpy(s->uart.cons->name, "ttyCL"); -#endif - ret = uart_register_driver(&s->uart); + /* Disable port */ + if (!uart_console(&s->port)) + regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0); + + s->tx_enabled = 1; + + ret = devm_request_irq(&pdev->dev, s->port.irq, uart_clps711x_int_tx, 0, + dev_name(&pdev->dev), &s->port); if (ret) { - dev_err(&pdev->dev, "Registering UART driver failed\n"); + uart_remove_one_port(&clps711x_uart, &s->port); return ret; } - for (i = 0; i < UART_CLPS711X_NR; i++) { - s->port[i].line = i; - s->port[i].dev = &pdev->dev; - s->port[i].irq = TX_IRQ(&s->port[i]); - s->port[i].iobase = SYSCON(&s->port[i]); - s->port[i].type = PORT_CLPS711X; - s->port[i].fifosize = 16; - s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; - s->port[i].uartclk = clk_get_rate(s->uart_clk); - s->port[i].ops = &uart_clps711x_ops; - WARN_ON(uart_add_one_port(&s->uart, &s->port[i])); - } + ret = devm_request_irq(&pdev->dev, s->rx_irq, uart_clps711x_int_rx, 0, + dev_name(&pdev->dev), &s->port); + if (ret) + uart_remove_one_port(&clps711x_uart, &s->port); - return 0; + return ret; } static int uart_clps711x_remove(struct platform_device *pdev) { struct clps711x_port *s = platform_get_drvdata(pdev); - int i; - - for (i = 0; i < UART_CLPS711X_NR; i++) - uart_remove_one_port(&s->uart, &s->port[i]); - - uart_unregister_driver(&s->uart); - return 0; + return uart_remove_one_port(&clps711x_uart, &s->port); } -static struct platform_driver clps711x_uart_driver = { +static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = { + { .compatible = "cirrus,clps711x-uart", }, + { } +}; +MODULE_DEVICE_TABLE(of, clps711x_uart_dt_ids); + +static struct platform_driver clps711x_uart_platform = { .driver = { - .name = UART_CLPS711X_NAME, - .owner = THIS_MODULE, + .name = "clps711x-uart", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(clps711x_uart_dt_ids), }, .probe = uart_clps711x_probe, .remove = uart_clps711x_remove, }; -module_platform_driver(clps711x_uart_driver); - -static struct platform_device clps711x_uart_device = { - .name = UART_CLPS711X_NAME, -}; static int __init uart_clps711x_init(void) { - return platform_device_register(&clps711x_uart_device); + int ret; + +#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE + clps711x_uart.cons = &clps711x_console; + clps711x_console.data = &clps711x_uart; +#endif + + ret = uart_register_driver(&clps711x_uart); + if (ret) + return ret; + + return platform_driver_register(&clps711x_uart_platform); } module_init(uart_clps711x_init); static void __exit uart_clps711x_exit(void) { - platform_device_unregister(&clps711x_uart_device); + platform_driver_unregister(&clps711x_uart_platform); + uart_unregister_driver(&clps711x_uart); } module_exit(uart_clps711x_exit); |