diff options
Diffstat (limited to 'drivers/tty/serial/8250')
| -rw-r--r-- | drivers/tty/serial/8250/8250.h | 32 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_aspeed_vuart.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_exar.c | 6 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 47 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 12 |
6 files changed, 71 insertions, 28 deletions
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 52bb21205bb6..6473361525d1 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -7,6 +7,7 @@ * Copyright (C) 2001 Russell King. */ +#include <linux/bits.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/dmaengine.h> @@ -70,24 +71,25 @@ struct serial8250_config { unsigned int flags; }; -#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ -#define UART_CAP_EFR (1 << 9) /* UART has EFR */ -#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ -#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ -#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ -#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ -#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ -#define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */ -#define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */ -#define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks: +#define UART_CAP_FIFO BIT(8) /* UART has FIFO */ +#define UART_CAP_EFR BIT(9) /* UART has EFR */ +#define UART_CAP_SLEEP BIT(10) /* UART has IER sleep */ +#define UART_CAP_AFE BIT(11) /* MCR-based hw flow control */ +#define UART_CAP_UUE BIT(12) /* UART needs IER bit 6 set (Xscale) */ +#define UART_CAP_RTOIE BIT(13) /* UART needs IER bit 4 set (Xscale, Tegra) */ +#define UART_CAP_HFIFO BIT(14) /* UART has a "hidden" FIFO */ +#define UART_CAP_RPM BIT(15) /* Runtime PM is active while idle */ +#define UART_CAP_IRDA BIT(16) /* UART supports IrDA line discipline */ +#define UART_CAP_MINI BIT(17) /* Mini UART on BCM283X family lacks: * STOP PARITY EPAR SPAR WLEN5 WLEN6 */ -#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ -#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ -#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ -#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ -#define UART_BUG_PARITY (1 << 4) /* UART mishandles parity if FIFO enabled */ +#define UART_BUG_QUOT BIT(0) /* UART has buggy quot LSB */ +#define UART_BUG_TXEN BIT(1) /* UART has buggy TX IIR status */ +#define UART_BUG_NOMSR BIT(2) /* UART has buggy MSR status bits (Au1x00) */ +#define UART_BUG_THRE BIT(3) /* UART has buggy THRE reassertion */ +#define UART_BUG_PARITY BIT(4) /* UART mishandles parity if FIFO enabled */ +#define UART_BUG_TXRACE BIT(5) /* UART Tx fails to set remote DR */ #ifdef CONFIG_SERIAL_8250_SHARE_IRQ diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index 61550f24a2d3..d035d08cb987 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -437,6 +437,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev) port.port.status = UPSTAT_SYNC_FIFO; port.port.dev = &pdev->dev; port.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE); + port.bugs |= UART_BUG_TXRACE; rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group); if (rc < 0) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 9e204f9b799a..a3a0154da567 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -714,6 +714,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = { { "APMC0D08", 0}, { "AMD0020", 0 }, { "AMDI0020", 0 }, + { "AMDI0022", 0 }, { "BRCM2032", 0 }, { "HISI0031", 0 }, { }, diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 2f49c580139b..bd4e9f6ac29c 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -553,7 +553,11 @@ static void pci_xr17v35x_exit(struct pci_dev *pcidev) { struct exar8250 *priv = pci_get_drvdata(pcidev); struct uart_8250_port *port = serial8250_get_port(priv->line[0]); - struct platform_device *pdev = port->port.private_data; + struct platform_device *pdev; + + pdev = port->port.private_data; + if (!pdev) + return; device_remove_software_node(&pdev->dev); platform_device_unregister(pdev); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 689d8227f95f..780cc99732b6 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -56,6 +56,8 @@ struct serial_private { int line[]; }; +#define PCI_DEVICE_ID_HPE_PCI_SERIAL 0x37e + static const struct pci_device_id pci_use_msi[] = { { PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, 0xA000, 0x1000) }, @@ -63,6 +65,8 @@ static const struct pci_device_id pci_use_msi[] = { 0xA000, 0x1000) }, { PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922, 0xA000, 0x1000) }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL, + PCI_ANY_ID, PCI_ANY_ID) }, { } }; @@ -1998,6 +2002,16 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .setup = pci_hp_diva_setup, }, /* + * HPE PCI serial device + */ + { + .vendor = PCI_VENDOR_ID_HP_3PAR, + .device = PCI_DEVICE_ID_HPE_PCI_SERIAL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_hp_diva_setup, + }, + /* * Intel */ { @@ -3944,21 +3958,26 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; uart.port.uartclk = board->base_baud * 16; - if (pci_match_id(pci_use_msi, dev)) { - dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n"); - pci_set_master(dev); - rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES); + if (board->flags & FL_NOIRQ) { + uart.port.irq = 0; } else { - dev_dbg(&dev->dev, "Using legacy interrupts\n"); - rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY); - } - if (rc < 0) { - kfree(priv); - priv = ERR_PTR(rc); - goto err_deinit; + if (pci_match_id(pci_use_msi, dev)) { + dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n"); + pci_set_master(dev); + rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES); + } else { + dev_dbg(&dev->dev, "Using legacy interrupts\n"); + rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY); + } + if (rc < 0) { + kfree(priv); + priv = ERR_PTR(rc); + goto err_deinit; + } + + uart.port.irq = pci_irq_vector(dev, 0); } - uart.port.irq = pci_irq_vector(dev, 0); uart.port.dev = &dev->dev; for (i = 0; i < nr_ports; i++) { @@ -4973,6 +4992,10 @@ static const struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b2_1_115200 }, + /* HPE PCI serial device */ + { PCI_VENDOR_ID_HP_3PAR, PCI_DEVICE_ID_HPE_PCI_SERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_115200 }, { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index d45dab1ab316..fc5ab2032282 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1809,6 +1809,18 @@ void serial8250_tx_chars(struct uart_8250_port *up) count = up->tx_loadsz; do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); + if (up->bugs & UART_BUG_TXRACE) { + /* + * The Aspeed BMC virtual UARTs have a bug where data + * may get stuck in the BMC's Tx FIFO from bursts of + * writes on the APB interface. + * + * Delay back-to-back writes by a read cycle to avoid + * stalling the VUART. Read a register that won't have + * side-effects and discard the result. + */ + serial_in(up, UART_SCR); + } xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; if (uart_circ_empty(xmit)) |