1 files changed, 282 insertions, 76 deletions

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 9abe81021484..287e5eb0723f 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -60,7 +60,7 @@
  * HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.'
  * with an optional trailing '-' followed by a byte value (0-255).
  */
-#define HPSA_DRIVER_VERSION "3.4.20-0"
+#define HPSA_DRIVER_VERSION "3.4.20-125"
 #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
 #define HPSA "hpsa"
 
@@ -787,7 +787,12 @@ static ssize_t host_show_hp_ssd_smart_path_enabled(struct device *dev,
 	}
 	offload_enabled = hdev->offload_enabled;
 	spin_unlock_irqrestore(&h->lock, flags);
-	return snprintf(buf, 20, "%d\n", offload_enabled);
+
+	if (hdev->devtype == TYPE_DISK || hdev->devtype == TYPE_ZBC)
+		return snprintf(buf, 20, "%d\n", offload_enabled);
+	else
+		return snprintf(buf, 40, "%s\n",
+				"Not applicable for a controller");
 }
 
 #define MAX_PATHS 8
@@ -1270,7 +1275,7 @@ static void hpsa_show_dev_msg(const char *level, struct ctlr_info *h,
 			dev->model,
 			label,
 			dev->offload_config ? '+' : '-',
-			dev->offload_enabled ? '+' : '-',
+			dev->offload_to_be_enabled ? '+' : '-',
 			dev->expose_device);
 }
 
@@ -1345,36 +1350,42 @@ lun_assigned:
 	(*nadded)++;
 	hpsa_show_dev_msg(KERN_INFO, h, device,
 		device->expose_device ? "added" : "masked");
-	device->offload_to_be_enabled = device->offload_enabled;
-	device->offload_enabled = 0;
 	return 0;
 }
 
-/* Update an entry in h->dev[] array. */
+/*
+ * Called during a scan operation.
+ *
+ * Update an entry in h->dev[] array.
+ */
 static void hpsa_scsi_update_entry(struct ctlr_info *h,
 	int entry, struct hpsa_scsi_dev_t *new_entry)
 {
-	int offload_enabled;
 	/* assumes h->devlock is held */
 	BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
 
 	/* Raid level changed. */
 	h->dev[entry]->raid_level = new_entry->raid_level;
 
+	/*
+	 * ioacccel_handle may have changed for a dual domain disk
+	 */
+	h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
+
 	/* Raid offload parameters changed.  Careful about the ordering. */
-	if (new_entry->offload_config && new_entry->offload_enabled) {
+	if (new_entry->offload_config && new_entry->offload_to_be_enabled) {
 		/*
 		 * if drive is newly offload_enabled, we want to copy the
 		 * raid map data first.  If previously offload_enabled and
 		 * offload_config were set, raid map data had better be
-		 * the same as it was before.  if raid map data is changed
+		 * the same as it was before. If raid map data has changed
 		 * then it had better be the case that
 		 * h->dev[entry]->offload_enabled is currently 0.
 		 */
 		h->dev[entry]->raid_map = new_entry->raid_map;
 		h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
 	}
-	if (new_entry->hba_ioaccel_enabled) {
+	if (new_entry->offload_to_be_enabled) {
 		h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
 		wmb(); /* set ioaccel_handle *before* hba_ioaccel_enabled */
 	}
@@ -1385,17 +1396,18 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h,
 
 	/*
 	 * We can turn off ioaccel offload now, but need to delay turning
-	 * it on until we can update h->dev[entry]->phys_disk[], but we
+	 * ioaccel on until we can update h->dev[entry]->phys_disk[], but we
 	 * can't do that until all the devices are updated.
 	 */
-	h->dev[entry]->offload_to_be_enabled = new_entry->offload_enabled;
-	if (!new_entry->offload_enabled)
+	h->dev[entry]->offload_to_be_enabled = new_entry->offload_to_be_enabled;
+
+	/*
+	 * turn ioaccel off immediately if told to do so.
+	 */
+	if (!new_entry->offload_to_be_enabled)
 		h->dev[entry]->offload_enabled = 0;
 
-	offload_enabled = h->dev[entry]->offload_enabled;
-	h->dev[entry]->offload_enabled = h->dev[entry]->offload_to_be_enabled;
 	hpsa_show_dev_msg(KERN_INFO, h, h->dev[entry], "updated");
-	h->dev[entry]->offload_enabled = offload_enabled;
 }
 
 /* Replace an entry from h->dev[] array. */
@@ -1421,9 +1433,8 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h,
 	h->dev[entry] = new_entry;
 	added[*nadded] = new_entry;
 	(*nadded)++;
+
 	hpsa_show_dev_msg(KERN_INFO, h, new_entry, "replaced");
-	new_entry->offload_to_be_enabled = new_entry->offload_enabled;
-	new_entry->offload_enabled = 0;
 }
 
 /* Remove an entry from h->dev[] array. */
@@ -1513,11 +1524,22 @@ static inline int device_updated(struct hpsa_scsi_dev_t *dev1,
 		return 1;
 	if (dev1->offload_config != dev2->offload_config)
 		return 1;
-	if (dev1->offload_enabled != dev2->offload_enabled)
+	if (dev1->offload_to_be_enabled != dev2->offload_to_be_enabled)
 		return 1;
 	if (!is_logical_dev_addr_mode(dev1->scsi3addr))
 		if (dev1->queue_depth != dev2->queue_depth)
 			return 1;
+	/*
+	 * This can happen for dual domain devices. An active
+	 * path change causes the ioaccel handle to change
+	 *
+	 * for example note the handle differences between p0 and p1
+	 * Device                    WWN               ,WWN hash,Handle
+	 * D016 p0|0x3 [02]P2E:01:01,0x5000C5005FC4DACA,0x9B5616,0x01030003
+	 *	p1                   0x5000C5005FC4DAC9,0x6798C0,0x00040004
+	 */
+	if (dev1->ioaccel_handle != dev2->ioaccel_handle)
+		return 1;
 	return 0;
 }
 
@@ -1727,6 +1749,11 @@ static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
 		 * be 0, but we'll turn it off here just in case
 		 */
 		if (!logical_drive->phys_disk[i]) {
+			dev_warn(&h->pdev->dev,
+				"%s: [%d:%d:%d:%d] A phys disk component of LV is missing, turning off offload_enabled for LV.\n",
+				__func__,
+				h->scsi_host->host_no, logical_drive->bus,
+				logical_drive->target, logical_drive->lun);
 			logical_drive->offload_enabled = 0;
 			logical_drive->offload_to_be_enabled = 0;
 			logical_drive->queue_depth = 8;
@@ -1738,8 +1765,12 @@ static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
 		 * way too high for partial stripe writes
 		 */
 		logical_drive->queue_depth = qdepth;
-	else
-		logical_drive->queue_depth = h->nr_cmds;
+	else {
+		if (logical_drive->external)
+			logical_drive->queue_depth = EXTERNAL_QD;
+		else
+			logical_drive->queue_depth = h->nr_cmds;
+	}
 }
 
 static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
@@ -1759,13 +1790,24 @@ static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
 		/*
 		 * If offload is currently enabled, the RAID map and
 		 * phys_disk[] assignment *better* not be changing
-		 * and since it isn't changing, we do not need to
-		 * update it.
+		 * because we would be changing ioaccel phsy_disk[] pointers
+		 * on a ioaccel volume processing I/O requests.
+		 *
+		 * If an ioaccel volume status changed, initially because it was
+		 * re-configured and thus underwent a transformation, or
+		 * a drive failed, we would have received a state change
+		 * request and ioaccel should have been turned off. When the
+		 * transformation completes, we get another state change
+		 * request to turn ioaccel back on. In this case, we need
+		 * to update the ioaccel information.
+		 *
+		 * Thus: If it is not currently enabled, but will be after
+		 * the scan completes, make sure the ioaccel pointers
+		 * are up to date.
 		 */
-		if (dev[i]->offload_enabled)
-			continue;
 
-		hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
+		if (!dev[i]->offload_enabled && dev[i]->offload_to_be_enabled)
+			hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
 	}
 }
 
@@ -1823,11 +1865,13 @@ static void hpsa_wait_for_outstanding_commands_for_dev(struct ctlr_info *h,
 			break;
 		if (++waits > 20)
 			break;
+		msleep(1000);
+	}
+
+	if (waits > 20)
 		dev_warn(&h->pdev->dev,
 			"%s: removing device with %d outstanding commands!\n",
 			__func__, cmds);
-		msleep(1000);
-	}
 }
 
 static void hpsa_remove_device(struct ctlr_info *h,
@@ -1838,6 +1882,12 @@ static void hpsa_remove_device(struct ctlr_info *h,
 	if (!h->scsi_host)
 		return;
 
+	/*
+	 * Allow for commands to drain
+	 */
+	device->removed = 1;
+	hpsa_wait_for_outstanding_commands_for_dev(h, device);
+
 	if (is_logical_device(device)) { /* RAID */
 		sdev = scsi_device_lookup(h->scsi_host, device->bus,
 						device->target, device->lun);
@@ -1855,9 +1905,6 @@ static void hpsa_remove_device(struct ctlr_info *h,
 		}
 	} else { /* HBA */
 
-		device->removed = 1;
-		hpsa_wait_for_outstanding_commands_for_dev(h, device);
-
 		hpsa_remove_sas_device(device);
 	}
 }
@@ -1965,8 +2012,13 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h,
 	}
 	hpsa_update_log_drive_phys_drive_ptrs(h, h->dev, h->ndevices);
 
-	/* Now that h->dev[]->phys_disk[] is coherent, we can enable
+	/*
+	 * Now that h->dev[]->phys_disk[] is coherent, we can enable
 	 * any logical drives that need it enabled.
+	 *
+	 * The raid map should be current by now.
+	 *
+	 * We are updating the device list used for I/O requests.
 	 */
 	for (i = 0; i < h->ndevices; i++) {
 		if (h->dev[i] == NULL)
@@ -2441,7 +2493,7 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
 
 	/*
 	 * Any RAID offload error results in retry which will use
-	 * the normal I/O path so the controller can handle whatever's
+	 * the normal I/O path so the controller can handle whatever is
 	 * wrong.
 	 */
 	if (is_logical_device(dev) &&
@@ -2913,6 +2965,57 @@ static void hpsa_scsi_interpret_error(struct ctlr_info *h,
 	}
 }
 
+static int hpsa_do_receive_diagnostic(struct ctlr_info *h, u8 *scsi3addr,
+					u8 page, u8 *buf, size_t bufsize)
+{
+	int rc = IO_OK;
+	struct CommandList *c;
+	struct ErrorInfo *ei;
+
+	c = cmd_alloc(h);
+	if (fill_cmd(c, RECEIVE_DIAGNOSTIC, h, buf, bufsize,
+			page, scsi3addr, TYPE_CMD)) {
+		rc = -1;
+		goto out;
+	}
+	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+		PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+	if (rc)
+		goto out;
+	ei = c->err_info;
+	if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+		hpsa_scsi_interpret_error(h, c);
+		rc = -1;
+	}
+out:
+	cmd_free(h, c);
+	return rc;
+}
+
+static u64 hpsa_get_enclosure_logical_identifier(struct ctlr_info *h,
+						u8 *scsi3addr)
+{
+	u8 *buf;
+	u64 sa = 0;
+	int rc = 0;
+
+	buf = kzalloc(1024, GFP_KERNEL);
+	if (!buf)
+		return 0;
+
+	rc = hpsa_do_receive_diagnostic(h, scsi3addr, RECEIVE_DIAGNOSTIC,
+					buf, 1024);
+
+	if (rc)
+		goto out;
+
+	sa = get_unaligned_be64(buf+12);
+
+out:
+	kfree(buf);
+	return sa;
+}
+
 static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
 			u16 page, unsigned char *buf,
 			unsigned char bufsize)
@@ -2929,7 +3032,7 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
 		goto out;
 	}
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-					PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+					PCI_DMA_FROMDEVICE, NO_TIMEOUT);
 	if (rc)
 		goto out;
 	ei = c->err_info;
@@ -3213,7 +3316,7 @@ static int hpsa_get_raid_map(struct ctlr_info *h,
 		return -1;
 	}
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-					PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+					PCI_DMA_FROMDEVICE, NO_TIMEOUT);
 	if (rc)
 		goto out;
 	ei = c->err_info;
@@ -3256,7 +3359,7 @@ static int hpsa_bmic_sense_subsystem_information(struct ctlr_info *h,
 	c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-				PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+				PCI_DMA_FROMDEVICE, NO_TIMEOUT);
 	if (rc)
 		goto out;
 	ei = c->err_info;
@@ -3284,7 +3387,7 @@ static int hpsa_bmic_id_controller(struct ctlr_info *h,
 		goto out;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-		PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+		PCI_DMA_FROMDEVICE, NO_TIMEOUT);
 	if (rc)
 		goto out;
 	ei = c->err_info;
@@ -3315,7 +3418,7 @@ static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
 	c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
 
 	hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE,
-						DEFAULT_TIMEOUT);
+						NO_TIMEOUT);
 	ei = c->err_info;
 	if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
 		hpsa_scsi_interpret_error(h, c);
@@ -3348,6 +3451,9 @@ static void hpsa_get_enclosure_info(struct ctlr_info *h,
 
 	bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]);
 
+	encl_dev->sas_address =
+		hpsa_get_enclosure_logical_identifier(h, scsi3addr);
+
 	if (encl_dev->target == -1 || encl_dev->lun == -1) {
 		rc = IO_OK;
 		goto out;
@@ -3388,7 +3494,7 @@ static void hpsa_get_enclosure_info(struct ctlr_info *h,
 		c->Request.CDB[5] = 0;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE,
-						DEFAULT_TIMEOUT);
+						NO_TIMEOUT);
 	if (rc)
 		goto out;
 
@@ -3472,6 +3578,30 @@ static void hpsa_get_sas_address(struct ctlr_info *h, unsigned char *scsi3addr,
 	dev->sas_address = sa;
 }
 
+static void hpsa_ext_ctrl_present(struct ctlr_info *h,
+	struct ReportExtendedLUNdata *physdev)
+{
+	u32 nphysicals;
+	int i;
+
+	if (h->discovery_polling)
+		return;
+
+	nphysicals = (get_unaligned_be32(physdev->LUNListLength) / 24) + 1;
+
+	for (i = 0; i < nphysicals; i++) {
+		if (physdev->LUN[i].device_type ==
+			BMIC_DEVICE_TYPE_CONTROLLER
+			&& !is_hba_lunid(physdev->LUN[i].lunid)) {
+			dev_info(&h->pdev->dev,
+				"External controller present, activate discovery polling and disable rld caching\n");
+			hpsa_disable_rld_caching(h);
+			h->discovery_polling = 1;
+			break;
+		}
+	}
+}
+
 /* Get a device id from inquiry page 0x83 */
 static bool hpsa_vpd_page_supported(struct ctlr_info *h,
 	unsigned char scsi3addr[], u8 page)
@@ -3516,6 +3646,13 @@ exit_supported:
 	return true;
 }
 
+/*
+ * Called during a scan operation.
+ * Sets ioaccel status on the new device list, not the existing device list
+ *
+ * The device list used during I/O will be updated later in
+ * adjust_hpsa_scsi_table.
+ */
 static void hpsa_get_ioaccel_status(struct ctlr_info *h,
 	unsigned char *scsi3addr, struct hpsa_scsi_dev_t *this_device)
 {
@@ -3544,12 +3681,12 @@ static void hpsa_get_ioaccel_status(struct ctlr_info *h,
 	this_device->offload_config =
 		!!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
 	if (this_device->offload_config) {
-		this_device->offload_enabled =
+		this_device->offload_to_be_enabled =
 			!!(ioaccel_status & OFFLOAD_ENABLED_BIT);
 		if (hpsa_get_raid_map(h, scsi3addr, this_device))
-			this_device->offload_enabled = 0;
+			this_device->offload_to_be_enabled = 0;
 	}
-	this_device->offload_to_be_enabled = this_device->offload_enabled;
+
 out:
 	kfree(buf);
 	return;
@@ -3604,7 +3741,7 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
 	if (extended_response)
 		c->Request.CDB[1] = extended_response;
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-					PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+					PCI_DMA_FROMDEVICE, NO_TIMEOUT);
 	if (rc)
 		goto out;
 	ei = c->err_info;
@@ -3739,7 +3876,7 @@ static unsigned char hpsa_volume_offline(struct ctlr_info *h,
 
 	(void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD);
 	rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
-					DEFAULT_TIMEOUT);
+					NO_TIMEOUT);
 	if (rc) {
 		cmd_free(h, c);
 		return HPSA_VPD_LV_STATUS_UNSUPPORTED;
@@ -4091,7 +4228,7 @@ static int hpsa_set_local_logical_count(struct ctlr_info *h,
 	memset(id_ctlr, 0, sizeof(*id_ctlr));
 	rc = hpsa_bmic_id_controller(h, id_ctlr, sizeof(*id_ctlr));
 	if (!rc)
-		if (id_ctlr->configured_logical_drive_count < 256)
+		if (id_ctlr->configured_logical_drive_count < 255)
 			*nlocals = id_ctlr->configured_logical_drive_count;
 		else
 			*nlocals = le16_to_cpu(
@@ -4228,6 +4365,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 	 */
 	ndevs_to_allocate = nphysicals + nlogicals + MAX_EXT_TARGETS + 1;
 
+	hpsa_ext_ctrl_present(h, physdev_list);
+
 	/* Allocate the per device structures */
 	for (i = 0; i < ndevs_to_allocate; i++) {
 		if (i >= HPSA_MAX_DEVICES) {
@@ -4258,6 +4397,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 		int phys_dev_index = i - (raid_ctlr_position == 0);
 		bool skip_device = false;
 
+		memset(tmpdevice, 0, sizeof(*tmpdevice));
+
 		physical_device = i < nphysicals + (raid_ctlr_position == 0);
 
 		/* Figure out where the LUN ID info is coming from */
@@ -4279,7 +4420,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 				continue;
 		}
 
-		/* Get device type, vendor, model, device id */
+		/* Get device type, vendor, model, device id, raid_map */
 		rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
 							&is_OBDR);
 		if (rc == -ENOMEM) {
@@ -4296,18 +4437,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 		figure_bus_target_lun(h, lunaddrbytes, tmpdevice);
 		this_device = currentsd[ncurrent];
 
-		/* Turn on discovery_polling if there are ext target devices.
-		 * Event-based change notification is unreliable for those.
-		 */
-		if (!h->discovery_polling) {
-			if (tmpdevice->external) {
-				h->discovery_polling = 1;
-				dev_info(&h->pdev->dev,
-					"External target, activate discovery polling.\n");
-			}
-		}
-
-
 		*this_device = *tmpdevice;
 		this_device->physical_device = physical_device;
 
@@ -6496,6 +6625,17 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 			c->Request.CDB[0] = HPSA_INQUIRY;
 			c->Request.CDB[4] = size & 0xFF;
 			break;
+		case RECEIVE_DIAGNOSTIC:
+			c->Request.CDBLen = 6;
+			c->Request.type_attr_dir =
+				TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+			c->Request.Timeout = 0;
+			c->Request.CDB[0] = cmd;
+			c->Request.CDB[1] = 1;
+			c->Request.CDB[2] = 1;
+			c->Request.CDB[3] = (size >> 8) & 0xFF;
+			c->Request.CDB[4] = size & 0xFF;
+			break;
 		case HPSA_REPORT_LOG:
 		case HPSA_REPORT_PHYS:
 			/* Talking to controller so It's a physical command
@@ -8007,6 +8147,10 @@ static void controller_lockup_detected(struct ctlr_info *h)
 	spin_unlock_irqrestore(&h->lock, flags);
 	dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x after %d\n",
 			lockup_detected, h->heartbeat_sample_interval / HZ);
+	if (lockup_detected == 0xffff0000) {
+		dev_warn(&h->pdev->dev, "Telling controller to do a CHKPT\n");
+		writel(DOORBELL_GENERATE_CHKPT, h->vaddr + SA5_DOORBELL);
+	}
 	pci_disable_device(h->pdev);
 	fail_all_outstanding_cmds(h);
 }
@@ -8047,9 +8191,79 @@ static int detect_controller_lockup(struct ctlr_info *h)
 	return false;
 }
 
-static void hpsa_ack_ctlr_events(struct ctlr_info *h)
+/*
+ * Set ioaccel status for all ioaccel volumes.
+ *
+ * Called from monitor controller worker (hpsa_event_monitor_worker)
+ *
+ * A Volume (or Volumes that comprise an Array set may be undergoing a
+ * transformation, so we will be turning off ioaccel for all volumes that
+ * make up the Array.
+ */
+static void hpsa_set_ioaccel_status(struct ctlr_info *h)
 {
+	int rc;
 	int i;
+	u8 ioaccel_status;
+	unsigned char *buf;
+	struct hpsa_scsi_dev_t *device;
+
+	if (!h)
+		return;
+
+	buf = kmalloc(64, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	/*
+	 * Run through current device list used during I/O requests.
+	 */
+	for (i = 0; i < h->ndevices; i++) {
+		device = h->dev[i];
+
+		if (!device)
+			continue;
+		if (!device->scsi3addr)
+			continue;
+		if (!hpsa_vpd_page_supported(h, device->scsi3addr,
+						HPSA_VPD_LV_IOACCEL_STATUS))
+			continue;
+
+		memset(buf, 0, 64);
+
+		rc = hpsa_scsi_do_inquiry(h, device->scsi3addr,
+					VPD_PAGE | HPSA_VPD_LV_IOACCEL_STATUS,
+					buf, 64);
+		if (rc != 0)
+			continue;
+
+		ioaccel_status = buf[IOACCEL_STATUS_BYTE];
+		device->offload_config =
+				!!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
+		if (device->offload_config)
+			device->offload_to_be_enabled =
+				!!(ioaccel_status & OFFLOAD_ENABLED_BIT);
+
+		/*
+		 * Immediately turn off ioaccel for any volume the
+		 * controller tells us to. Some of the reasons could be:
+		 *    transformation - change to the LVs of an Array.
+		 *    degraded volume - component failure
+		 *
+		 * If ioaccel is to be re-enabled, re-enable later during the
+		 * scan operation so the driver can get a fresh raidmap
+		 * before turning ioaccel back on.
+		 *
+		 */
+		if (!device->offload_to_be_enabled)
+			device->offload_enabled = 0;
+	}
+
+	kfree(buf);
+}
+
+static void hpsa_ack_ctlr_events(struct ctlr_info *h)
+{
 	char *event_type;
 
 	if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
@@ -8067,10 +8281,7 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h)
 			event_type = "configuration change";
 		/* Stop sending new RAID offload reqs via the IO accelerator */
 		scsi_block_requests(h->scsi_host);
-		for (i = 0; i < h->ndevices; i++) {
-			h->dev[i]->offload_enabled = 0;
-			h->dev[i]->offload_to_be_enabled = 0;
-		}
+		hpsa_set_ioaccel_status(h);
 		hpsa_drain_accel_commands(h);
 		/* Set 'accelerator path config change' bit */
 		dev_warn(&h->pdev->dev,
@@ -8087,10 +8298,6 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h)
 		writel(h->events, &(h->cfgtable->clear_event_notify));
 		writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL);
 		hpsa_wait_for_clear_event_notify_ack(h);
-#if 0
-		writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
-		hpsa_wait_for_mode_change_ack(h);
-#endif
 	}
 	return;
 }
@@ -8241,7 +8448,6 @@ static void hpsa_rescan_ctlr_worker(struct work_struct *work)
 	if (h->drv_req_rescan || hpsa_offline_devices_ready(h)) {
 		hpsa_perform_rescan(h);
 	} else if (h->discovery_polling) {
-		hpsa_disable_rld_caching(h);
 		if (hpsa_luns_changed(h)) {
 			dev_info(&h->pdev->dev,
 				"driver discovery polling rescan.\n");
@@ -8601,7 +8807,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h)
 		goto errout;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-		PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+		PCI_DMA_FROMDEVICE, NO_TIMEOUT);
 	if ((rc != 0) || (c->err_info->CommandStatus != 0))
 		goto errout;
 
@@ -8613,7 +8819,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h)
 		goto errout;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-		PCI_DMA_TODEVICE, DEFAULT_TIMEOUT);
+		PCI_DMA_TODEVICE, NO_TIMEOUT);
 	if ((rc != 0)  || (c->err_info->CommandStatus != 0))
 		goto errout;
 
@@ -8623,7 +8829,7 @@ static void hpsa_disable_rld_caching(struct ctlr_info *h)
 		goto errout;
 
 	rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
-		PCI_DMA_FROMDEVICE, DEFAULT_TIMEOUT);
+		PCI_DMA_FROMDEVICE, NO_TIMEOUT);
 	if ((rc != 0)  || (c->err_info->CommandStatus != 0))
 		goto errout;
 
@@ -8684,6 +8890,8 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 	destroy_workqueue(h->rescan_ctlr_wq);
 	destroy_workqueue(h->resubmit_wq);
 
+	hpsa_delete_sas_host(h);
+
 	/*
 	 * Call before disabling interrupts.
 	 * scsi_remove_host can trigger I/O operations especially
@@ -8718,8 +8926,6 @@ static void hpsa_remove_one(struct pci_dev *pdev)
 	h->lockup_detected = NULL;			/* init_one 2 */
 	/* (void) pci_disable_pcie_error_reporting(pdev); */	/* init_one 1 */
 
-	hpsa_delete_sas_host(h);
-
 	kfree(h);					/* init_one 1 */
 }
 
@@ -9207,9 +9413,9 @@ static void hpsa_free_sas_phy(struct hpsa_sas_phy *hpsa_sas_phy)
 	struct sas_phy *phy = hpsa_sas_phy->phy;
 
 	sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy);
-	sas_phy_free(phy);
 	if (hpsa_sas_phy->added_to_port)
 		list_del(&hpsa_sas_phy->phy_list_entry);
+	sas_phy_delete(phy);
 	kfree(hpsa_sas_phy);
 }
 
@@ -9367,7 +9573,7 @@ static int hpsa_add_sas_host(struct ctlr_info *h)
 	struct hpsa_sas_port *hpsa_sas_port;
 	struct hpsa_sas_phy *hpsa_sas_phy;
 
-	parent_dev = &h->scsi_host->shost_gendev;
+	parent_dev = &h->scsi_host->shost_dev;
 
 	hpsa_sas_node = hpsa_alloc_sas_node(parent_dev);
 	if (!hpsa_sas_node)
@@ -9458,7 +9664,7 @@ hpsa_sas_get_linkerrors(struct sas_phy *phy)
 static int
 hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
 {
-	*identifier = 0;
+	*identifier = rphy->identify.sas_address;
 	return 0;
 }