summaryrefslogtreecommitdiff
path: root/drivers/regulator/max77802.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator/max77802.c')
-rw-r--r--drivers/regulator/max77802.c254
1 files changed, 139 insertions, 115 deletions
diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c
index d89792b084e9..0766615c60bc 100644
--- a/drivers/regulator/max77802.c
+++ b/drivers/regulator/max77802.c
@@ -33,6 +33,7 @@
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/max77686.h>
#include <linux/mfd/max77686-private.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
/* Default ramp delay in case it is not manually set */
#define MAX77802_RAMP_DELAY 100000 /* uV/us */
@@ -49,6 +50,10 @@
#define MAX77802_RAMP_RATE_MASK_4BIT 0xF0
#define MAX77802_RAMP_RATE_SHIFT_4BIT 4
+#define MAX77802_STATUS_OFF 0x0
+#define MAX77802_OFF_PWRREQ 0x1
+#define MAX77802_LP_PWRREQ 0x2
+
/* MAX77802 has two register formats: 2-bit and 4-bit */
static const unsigned int ramp_table_77802_2bit[] = {
12500,
@@ -65,9 +70,16 @@ static unsigned int ramp_table_77802_4bit[] = {
};
struct max77802_regulator_prv {
+ /* Array indexed by regulator id */
unsigned int opmode[MAX77802_REG_MAX];
};
+static inline unsigned int max77802_map_mode(unsigned int mode)
+{
+ return mode == MAX77802_OPMODE_NORMAL ?
+ REGULATOR_MODE_NORMAL : REGULATOR_MODE_STANDBY;
+}
+
static int max77802_get_opmode_shift(int id)
{
if (id == MAX77802_BUCK1 || (id >= MAX77802_BUCK5 &&
@@ -83,17 +95,16 @@ static int max77802_get_opmode_shift(int id)
return -EINVAL;
}
-/*
- * Some BUCKS supports Normal[ON/OFF] mode during suspend
+/**
+ * max77802_set_suspend_disable - Disable the regulator during system suspend
+ * @rdev: regulator to mark as disabled
*
- * BUCK 1, 6, 2-4, 5, 7-10 (all)
- *
- * The other mode (0x02) will make PWRREQ switch between normal
- * and low power.
+ * All regulators expect LDO 1, 3, 20 and 21 support OFF by PWRREQ.
+ * Configure the regulator so the PMIC will turn it OFF during system suspend.
*/
-static int max77802_buck_set_suspend_disable(struct regulator_dev *rdev)
+static int max77802_set_suspend_disable(struct regulator_dev *rdev)
{
- unsigned int val = MAX77802_OPMODE_STANDBY;
+ unsigned int val = MAX77802_OFF_PWRREQ;
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
@@ -104,14 +115,11 @@ static int max77802_buck_set_suspend_disable(struct regulator_dev *rdev)
}
/*
- * Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state
- * (Enable Control Logic1 by PWRREQ)
- *
- * LDOs 2, 4-19, 22-35.
+ * Some LDOs support Low Power Mode while the system is running.
*
+ * LDOs 1, 3, 20, 21.
*/
-static int max77802_ldo_set_suspend_mode_logic1(struct regulator_dev *rdev,
- unsigned int mode)
+static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
@@ -119,14 +127,11 @@ static int max77802_ldo_set_suspend_mode_logic1(struct regulator_dev *rdev,
int shift = max77802_get_opmode_shift(id);
switch (mode) {
- case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = MAX77802_OPMODE_LP;
+ case REGULATOR_MODE_STANDBY:
+ val = MAX77802_OPMODE_LP; /* ON in Low Power Mode */
break;
- case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = MAX77802_OPMODE_NORMAL;
- break;
- case REGULATOR_MODE_STANDBY: /* ON/OFF by PWRREQ */
- val = MAX77802_OPMODE_STANDBY;
+ case REGULATOR_MODE_NORMAL:
+ val = MAX77802_OPMODE_NORMAL; /* ON in Normal Mode */
break;
default:
dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
@@ -139,35 +144,76 @@ static int max77802_ldo_set_suspend_mode_logic1(struct regulator_dev *rdev,
rdev->desc->enable_mask, val << shift);
}
-/*
- * Mode 1 (Output[ON/OFF] by PWRREQ) is not supported on some LDOs
- * (Enable Control Logic2 by PWRREQ)
+static unsigned max77802_get_mode(struct regulator_dev *rdev)
+{
+ struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+
+ return max77802_map_mode(max77802->opmode[id]);
+}
+
+/**
+ * max77802_set_suspend_mode - set regulator opmode when the system is suspended
+ * @rdev: regulator to change mode
+ * @mode: operating mode to be set
*
- * LDOs 1, 20, 21, and 3,
+ * Will set the operating mode for the regulators during system suspend.
+ * This function is valid for the three different enable control logics:
*
+ * Enable Control Logic1 by PWRREQ (BUCK 2-4 and LDOs 2, 4-19, 22-35)
+ * Enable Control Logic2 by PWRREQ (LDOs 1, 20, 21)
+ * Enable Control Logic3 by PWRREQ (LDO 3)
+ *
+ * If setting the regulator mode fails, the function only warns but does
+ * not return an error code to avoid the regulator core to stop setting
+ * the operating mode for the remaining regulators.
*/
-static int max77802_ldo_set_suspend_mode_logic2(struct regulator_dev *rdev,
- unsigned int mode)
+static int max77802_set_suspend_mode(struct regulator_dev *rdev,
+ unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
unsigned int val;
int shift = max77802_get_opmode_shift(id);
+ /*
+ * If the regulator has been disabled for suspend
+ * then is invalid to try setting a suspend mode.
+ */
+ if (max77802->opmode[id] == MAX77802_OFF_PWRREQ) {
+ dev_warn(&rdev->dev, "%s: is disabled, mode: 0x%x not set\n",
+ rdev->desc->name, mode);
+ return 0;
+ }
+
switch (mode) {
- case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = MAX77802_OPMODE_LP;
- break;
- case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = MAX77802_OPMODE_NORMAL;
+ case REGULATOR_MODE_STANDBY:
+ /*
+ * If the regulator opmode is normal then enable
+ * ON in Low Power Mode by PWRREQ. If the mode is
+ * already Low Power then no action is required.
+ */
+ if (max77802->opmode[id] == MAX77802_OPMODE_NORMAL)
+ val = MAX77802_LP_PWRREQ;
+ else
+ return 0;
break;
+ case REGULATOR_MODE_NORMAL:
+ /*
+ * If the regulator operating mode is Low Power then
+ * normal is not a valid opmode in suspend. If the
+ * mode is already normal then no action is required.
+ */
+ if (max77802->opmode[id] == MAX77802_OPMODE_LP)
+ dev_warn(&rdev->dev, "%s: in Low Power: 0x%x invalid\n",
+ rdev->desc->name, mode);
+ return 0;
default:
dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
rdev->desc->name, mode);
return -EINVAL;
}
- max77802->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val << shift);
}
@@ -178,6 +224,9 @@ static int max77802_enable(struct regulator_dev *rdev)
int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
+ if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
+ max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
+
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
max77802->opmode[id] << shift);
@@ -247,7 +296,8 @@ static struct regulator_ops max77802_ldo_ops_logic1 = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_mode = max77802_ldo_set_suspend_mode_logic1,
+ .set_suspend_disable = max77802_set_suspend_disable,
+ .set_suspend_mode = max77802_set_suspend_mode,
};
/*
@@ -262,7 +312,9 @@ static struct regulator_ops max77802_ldo_ops_logic2 = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_mode = max77802_ldo_set_suspend_mode_logic2,
+ .set_mode = max77802_set_mode,
+ .get_mode = max77802_get_mode,
+ .set_suspend_mode = max77802_set_suspend_mode,
};
/* BUCKS 1, 6 */
@@ -276,10 +328,25 @@ static struct regulator_ops max77802_buck_16_dvs_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77802_set_ramp_delay_4bit,
- .set_suspend_disable = max77802_buck_set_suspend_disable,
+ .set_suspend_disable = max77802_set_suspend_disable,
};
-/* BUCKs 2-4, 5, 7-10 */
+/* BUCKs 2-4 */
+static struct regulator_ops max77802_buck_234_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77802_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = max77802_set_ramp_delay_2bit,
+ .set_suspend_disable = max77802_set_suspend_disable,
+ .set_suspend_mode = max77802_set_suspend_mode,
+};
+
+/* BUCKs 5, 7-10 */
static struct regulator_ops max77802_buck_dvs_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
@@ -290,12 +357,14 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77802_set_ramp_delay_2bit,
- .set_suspend_disable = max77802_buck_set_suspend_disable,
+ .set_suspend_disable = max77802_set_suspend_disable,
};
/* LDOs 3-7, 9-14, 18-26, 28, 29, 32-34 */
#define regulator_77802_desc_p_ldo(num, supply, log) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_LDO##num, \
.supply_name = "inl"#supply, \
.ops = &max77802_ldo_ops_logic##log, \
@@ -309,11 +378,14 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+ .of_map_mode = max77802_map_mode, \
}
/* LDOs 1, 2, 8, 15, 17, 27, 30, 35 */
#define regulator_77802_desc_n_ldo(num, supply, log) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_LDO##num, \
.supply_name = "inl"#supply, \
.ops = &max77802_ldo_ops_logic##log, \
@@ -327,11 +399,14 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKs 1, 6 */
#define regulator_77802_desc_16_buck(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
.ops = &max77802_buck_16_dvs_ops, \
@@ -345,14 +420,17 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.vsel_mask = MAX77802_DVS_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKS 2-4 */
#define regulator_77802_desc_234_buck(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
- .ops = &max77802_buck_dvs_ops, \
+ .ops = &max77802_buck_234_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = 600000, \
@@ -364,11 +442,14 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \
.enable_mask = MAX77802_OPMODE_MASK << \
MAX77802_OPMODE_BUCK234_SHIFT, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCK 5 */
#define regulator_77802_desc_buck5(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
.ops = &max77802_buck_dvs_ops, \
@@ -382,11 +463,14 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK5CTRL, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKs 7-10 */
#define regulator_77802_desc_buck7_10(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
.ops = &max77802_buck_dvs_ops, \
@@ -400,9 +484,10 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK7CTRL + (num - 7) * 3, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
regulator_77802_desc_16_buck(1),
regulator_77802_desc_234_buck(2),
regulator_77802_desc_234_buck(3),
@@ -447,85 +532,19 @@ static struct regulator_desc regulators[] = {
regulator_77802_desc_n_ldo(35, 2, 1),
};
-#ifdef CONFIG_OF
-static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
- struct max77686_platform_data *pdata)
-{
- struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct device_node *pmic_np, *regulators_np;
- struct max77686_regulator_data *rdata;
- struct of_regulator_match rmatch;
- unsigned int i;
-
- pmic_np = iodev->dev->of_node;
- regulators_np = of_get_child_by_name(pmic_np, "regulators");
- if (!regulators_np) {
- dev_err(&pdev->dev, "could not find regulators sub-node\n");
- return -EINVAL;
- }
-
- pdata->num_regulators = ARRAY_SIZE(regulators);
- rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
- pdata->num_regulators, GFP_KERNEL);
- if (!rdata) {
- of_node_put(regulators_np);
- return -ENOMEM;
- }
-
- for (i = 0; i < pdata->num_regulators; i++) {
- rmatch.name = regulators[i].name;
- rmatch.init_data = NULL;
- rmatch.of_node = NULL;
- if (of_regulator_match(&pdev->dev, regulators_np, &rmatch,
- 1) != 1) {
- dev_warn(&pdev->dev, "No matching regulator for '%s'\n",
- rmatch.name);
- continue;
- }
- rdata[i].initdata = rmatch.init_data;
- rdata[i].of_node = rmatch.of_node;
- rdata[i].id = regulators[i].id;
- }
-
- pdata->regulators = rdata;
- of_node_put(regulators_np);
-
- return 0;
-}
-#else
-static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
- struct max77686_platform_data *pdata)
-{
- return 0;
-}
-#endif /* CONFIG_OF */
-
static int max77802_pmic_probe(struct platform_device *pdev)
{
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
struct max77802_regulator_prv *max77802;
- int i, ret = 0, val;
+ int i, val;
struct regulator_config config = { };
- /* This is allocated by the MFD driver */
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data found for regulator\n");
- return -ENODEV;
- }
-
max77802 = devm_kzalloc(&pdev->dev,
sizeof(struct max77802_regulator_prv),
GFP_KERNEL);
if (!max77802)
return -ENOMEM;
- if (iodev->dev->of_node) {
- ret = max77802_pmic_dt_parse_pdata(pdev, pdata);
- if (ret)
- return ret;
- }
-
config.dev = iodev->dev;
config.regmap = iodev->regmap;
config.driver_data = max77802;
@@ -533,21 +552,25 @@ static int max77802_pmic_probe(struct platform_device *pdev)
for (i = 0; i < MAX77802_REG_MAX; i++) {
struct regulator_dev *rdev;
- int id = pdata->regulators[i].id;
+ int id = regulators[i].id;
int shift = max77802_get_opmode_shift(id);
-
- config.init_data = pdata->regulators[i].initdata;
- config.of_node = pdata->regulators[i].of_node;
+ int ret;
ret = regmap_read(iodev->regmap, regulators[i].enable_reg, &val);
- val = val >> shift & MAX77802_OPMODE_MASK;
+ if (ret < 0) {
+ dev_warn(&pdev->dev,
+ "cannot read current mode for %d\n", i);
+ val = MAX77802_OPMODE_NORMAL;
+ } else {
+ val = val >> shift & MAX77802_OPMODE_MASK;
+ }
/*
* If the regulator is disabled and the system warm rebooted,
* the hardware reports OFF as the regulator operating mode.
* Default to operating mode NORMAL in that case.
*/
- if (val == MAX77802_OPMODE_OFF)
+ if (val == MAX77802_STATUS_OFF)
max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
else
max77802->opmode[id] = val;
@@ -555,9 +578,10 @@ static int max77802_pmic_probe(struct platform_device *pdev)
rdev = devm_regulator_register(&pdev->dev,
&regulators[i], &config);
if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
dev_err(&pdev->dev,
- "regulator init failed for %d\n", i);
- return PTR_ERR(rdev);
+ "regulator init failed for %d: %d\n", i, ret);
+ return ret;
}
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 03:41:19 +0300