diff options
Diffstat (limited to 'drivers/platform/x86/thinkpad_acpi.c')
| -rw-r--r-- | drivers/platform/x86/thinkpad_acpi.c | 389 |
1 files changed, 388 insertions, 1 deletions
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index d5eaf3b1edba..1c57ee2b6d19 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -23,7 +23,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#define TPACPI_VERSION "0.25" +#define TPACPI_VERSION "0.26" #define TPACPI_SYSFS_VERSION 0x030000 /* @@ -66,6 +66,7 @@ #include <linux/seq_file.h> #include <linux/sysfs.h> #include <linux/backlight.h> +#include <linux/bitops.h> #include <linux/fb.h> #include <linux/platform_device.h> #include <linux/hwmon.h> @@ -78,11 +79,13 @@ #include <linux/workqueue.h> #include <linux/acpi.h> #include <linux/pci_ids.h> +#include <linux/power_supply.h> #include <linux/thinkpad_acpi.h> #include <sound/core.h> #include <sound/control.h> #include <sound/initval.h> #include <linux/uaccess.h> +#include <acpi/battery.h> #include <acpi/video.h> /* ThinkPad CMOS commands */ @@ -335,6 +338,7 @@ static struct { u32 sensors_pdev_attrs_registered:1; u32 hotkey_poll_active:1; u32 has_adaptive_kbd:1; + u32 battery:1; } tp_features; static struct { @@ -9209,6 +9213,385 @@ static struct ibm_struct mute_led_driver_data = { .resume = mute_led_resume, }; +/* + * Battery Wear Control Driver + * Contact: Ognjen Galic <smclt30p@gmail.com> + */ + +/* Metadata */ + +#define GET_START "BCTG" +#define SET_START "BCCS" +#define GET_STOP "BCSG" +#define SET_STOP "BCSS" + +#define START_ATTR "charge_start_threshold" +#define STOP_ATTR "charge_stop_threshold" + +enum { + BAT_ANY = 0, + BAT_PRIMARY = 1, + BAT_SECONDARY = 2 +}; + +enum { + /* Error condition bit */ + METHOD_ERR = BIT(31), +}; + +enum { + /* This is used in the get/set helpers */ + THRESHOLD_START, + THRESHOLD_STOP, +}; + +struct tpacpi_battery_data { + int charge_start; + int start_support; + int charge_stop; + int stop_support; +}; + +struct tpacpi_battery_driver_data { + struct tpacpi_battery_data batteries[3]; + int individual_addressing; +}; + +static struct tpacpi_battery_driver_data battery_info; + +/* ACPI helpers/functions/probes */ + +/** + * This evaluates a ACPI method call specific to the battery + * ACPI extension. The specifics are that an error is marked + * in the 32rd bit of the response, so we just check that here. + */ +static acpi_status tpacpi_battery_acpi_eval(char *method, int *ret, int param) +{ + int response; + + if (!acpi_evalf(hkey_handle, &response, method, "dd", param)) { + acpi_handle_err(hkey_handle, "%s: evaluate failed", method); + return AE_ERROR; + } + if (response & METHOD_ERR) { + acpi_handle_err(hkey_handle, + "%s evaluated but flagged as error", method); + return AE_ERROR; + } + *ret = response; + return AE_OK; +} + +static int tpacpi_battery_get(int what, int battery, int *ret) +{ + switch (what) { + case THRESHOLD_START: + if ACPI_FAILURE(tpacpi_battery_acpi_eval(GET_START, ret, battery)) + return -ENODEV; + + /* The value is in the low 8 bits of the response */ + *ret = *ret & 0xFF; + return 0; + case THRESHOLD_STOP: + if ACPI_FAILURE(tpacpi_battery_acpi_eval(GET_STOP, ret, battery)) + return -ENODEV; + /* Value is in lower 8 bits */ + *ret = *ret & 0xFF; + /* + * On the stop value, if we return 0 that + * does not make any sense. 0 means Default, which + * means that charging stops at 100%, so we return + * that. + */ + if (*ret == 0) + *ret = 100; + return 0; + default: + pr_crit("wrong parameter: %d", what); + return -EINVAL; + } +} + +static int tpacpi_battery_set(int what, int battery, int value) +{ + int param, ret; + /* The first 8 bits are the value of the threshold */ + param = value; + /* The battery ID is in bits 8-9, 2 bits */ + param |= battery << 8; + + switch (what) { + case THRESHOLD_START: + if ACPI_FAILURE(tpacpi_battery_acpi_eval(SET_START, &ret, param)) { + pr_err("failed to set charge threshold on battery %d", + battery); + return -ENODEV; + } + return 0; + case THRESHOLD_STOP: + if ACPI_FAILURE(tpacpi_battery_acpi_eval(SET_STOP, &ret, param)) { + pr_err("failed to set stop threshold: %d", battery); + return -ENODEV; + } + return 0; + default: + pr_crit("wrong parameter: %d", what); + return -EINVAL; + } +} + +static int tpacpi_battery_probe(int battery) +{ + int ret = 0; + + memset(&battery_info, 0, sizeof(struct tpacpi_battery_driver_data)); + /* + * 1) Get the current start threshold + * 2) Check for support + * 3) Get the current stop threshold + * 4) Check for support + */ + if (acpi_has_method(hkey_handle, GET_START)) { + if ACPI_FAILURE(tpacpi_battery_acpi_eval(GET_START, &ret, battery)) { + pr_err("Error probing battery %d\n", battery); + return -ENODEV; + } + /* Individual addressing is in bit 9 */ + if (ret & BIT(9)) + battery_info.individual_addressing = true; + /* Support is marked in bit 8 */ + if (ret & BIT(8)) + battery_info.batteries[battery].start_support = 1; + else + return -ENODEV; + if (tpacpi_battery_get(THRESHOLD_START, battery, + &battery_info.batteries[battery].charge_start)) { + pr_err("Error probing battery %d\n", battery); + return -ENODEV; + } + } + if (acpi_has_method(hkey_handle, GET_STOP)) { + if ACPI_FAILURE(tpacpi_battery_acpi_eval(GET_STOP, &ret, battery)) { + pr_err("Error probing battery stop; %d\n", battery); + return -ENODEV; + } + /* Support is marked in bit 8 */ + if (ret & BIT(8)) + battery_info.batteries[battery].stop_support = 1; + else + return -ENODEV; + if (tpacpi_battery_get(THRESHOLD_STOP, battery, + &battery_info.batteries[battery].charge_stop)) { + pr_err("Error probing battery stop: %d\n", battery); + return -ENODEV; + } + } + pr_info("battery %d registered (start %d, stop %d)", + battery, + battery_info.batteries[battery].charge_start, + battery_info.batteries[battery].charge_stop); + + return 0; +} + +/* General helper functions */ + +static int tpacpi_battery_get_id(const char *battery_name) +{ + + if (strcmp(battery_name, "BAT0") == 0) + return BAT_PRIMARY; + if (strcmp(battery_name, "BAT1") == 0) + return BAT_SECONDARY; + /* + * If for some reason the battery is not BAT0 nor is it + * BAT1, we will assume it's the default, first battery, + * AKA primary. + */ + pr_warn("unknown battery %s, assuming primary", battery_name); + return BAT_PRIMARY; +} + +/* sysfs interface */ + +static ssize_t tpacpi_battery_store(int what, + struct device *dev, + const char *buf, size_t count) +{ + struct power_supply *supply = to_power_supply(dev); + unsigned long value; + int battery, rval; + /* + * Some systems have support for more than + * one battery. If that is the case, + * tpacpi_battery_probe marked that addressing + * them individually is supported, so we do that + * based on the device struct. + * + * On systems that are not supported, we assume + * the primary as most of the ACPI calls fail + * with "Any Battery" as the parameter. + */ + if (battery_info.individual_addressing) + /* BAT_PRIMARY or BAT_SECONDARY */ + battery = tpacpi_battery_get_id(supply->desc->name); + else + battery = BAT_PRIMARY; + + rval = kstrtoul(buf, 10, &value); + if (rval) + return rval; + + switch (what) { + case THRESHOLD_START: + if (!battery_info.batteries[battery].start_support) + return -ENODEV; + /* valid values are [0, 99] */ + if (value < 0 || value > 99) + return -EINVAL; + if (value > battery_info.batteries[battery].charge_stop) + return -EINVAL; + if (tpacpi_battery_set(THRESHOLD_START, battery, value)) + return -ENODEV; + battery_info.batteries[battery].charge_start = value; + return count; + + case THRESHOLD_STOP: + if (!battery_info.batteries[battery].stop_support) + return -ENODEV; + /* valid values are [1, 100] */ + if (value < 1 || value > 100) + return -EINVAL; + if (value < battery_info.batteries[battery].charge_start) + return -EINVAL; + battery_info.batteries[battery].charge_stop = value; + /* + * When 100 is passed to stop, we need to flip + * it to 0 as that the EC understands that as + * "Default", which will charge to 100% + */ + if (value == 100) + value = 0; + if (tpacpi_battery_set(THRESHOLD_STOP, battery, value)) + return -EINVAL; + return count; + default: + pr_crit("Wrong parameter: %d", what); + return -EINVAL; + } + return count; +} + +static ssize_t tpacpi_battery_show(int what, + struct device *dev, + char *buf) +{ + struct power_supply *supply = to_power_supply(dev); + int ret, battery; + /* + * Some systems have support for more than + * one battery. If that is the case, + * tpacpi_battery_probe marked that addressing + * them individually is supported, so we; + * based on the device struct. + * + * On systems that are not supported, we assume + * the primary as most of the ACPI calls fail + * with "Any Battery" as the parameter. + */ + if (battery_info.individual_addressing) + /* BAT_PRIMARY or BAT_SECONDARY */ + battery = tpacpi_battery_get_id(supply->desc->name); + else + battery = BAT_PRIMARY; + if (tpacpi_battery_get(what, battery, &ret)) + return -ENODEV; + return sprintf(buf, "%d\n", ret); +} + +static ssize_t charge_start_threshold_show(struct device *device, + struct device_attribute *attr, + char *buf) +{ + return tpacpi_battery_show(THRESHOLD_START, device, buf); +} + +static ssize_t charge_stop_threshold_show(struct device *device, + struct device_attribute *attr, + char *buf) +{ + return tpacpi_battery_show(THRESHOLD_STOP, device, buf); +} + +static ssize_t charge_start_threshold_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return tpacpi_battery_store(THRESHOLD_START, dev, buf, count); +} + +static ssize_t charge_stop_threshold_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return tpacpi_battery_store(THRESHOLD_STOP, dev, buf, count); +} + +static DEVICE_ATTR_RW(charge_start_threshold); +static DEVICE_ATTR_RW(charge_stop_threshold); + +static struct attribute *tpacpi_battery_attrs[] = { + &dev_attr_charge_start_threshold.attr, + &dev_attr_charge_stop_threshold.attr, + NULL, +}; + +ATTRIBUTE_GROUPS(tpacpi_battery); + +/* ACPI battery hooking */ + +static int tpacpi_battery_add(struct power_supply *battery) +{ + int batteryid = tpacpi_battery_get_id(battery->desc->name); + + if (tpacpi_battery_probe(batteryid)) + return -ENODEV; + if (device_add_groups(&battery->dev, tpacpi_battery_groups)) + return -ENODEV; + return 0; +} + +static int tpacpi_battery_remove(struct power_supply *battery) +{ + device_remove_groups(&battery->dev, tpacpi_battery_groups); + return 0; +} + +static struct acpi_battery_hook battery_hook = { + .add_battery = tpacpi_battery_add, + .remove_battery = tpacpi_battery_remove, + .name = "ThinkPad Battery Extension", +}; + +/* Subdriver init/exit */ + +static int __init tpacpi_battery_init(struct ibm_init_struct *ibm) +{ + battery_hook_register(&battery_hook); + return 0; +} + +static void tpacpi_battery_exit(void) +{ + battery_hook_unregister(&battery_hook); +} + +static struct ibm_struct battery_driver_data = { + .name = "battery", + .exit = tpacpi_battery_exit, +}; + /**************************************************************************** **************************************************************************** * @@ -9655,6 +10038,10 @@ static struct ibm_init_struct ibms_init[] __initdata = { .init = mute_led_init, .data = &mute_led_driver_data, }, + { + .init = tpacpi_battery_init, + .data = &battery_driver_data, + }, }; static int __init set_ibm_param(const char *val, const struct kernel_param *kp) |