diff options
Diffstat (limited to 'drivers/net/wireless/Kconfig')
| -rw-r--r-- | drivers/net/wireless/Kconfig | 238 |
1 files changed, 26 insertions, 212 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index f9f94229bf1b..8c8edaf1bba6 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -17,6 +17,22 @@ menuconfig WLAN if WLAN +source "drivers/net/wireless/admtek/Kconfig" +source "drivers/net/wireless/ath/Kconfig" +source "drivers/net/wireless/atmel/Kconfig" +source "drivers/net/wireless/broadcom/Kconfig" +source "drivers/net/wireless/cisco/Kconfig" +source "drivers/net/wireless/intel/Kconfig" +source "drivers/net/wireless/intersil/Kconfig" +source "drivers/net/wireless/marvell/Kconfig" +source "drivers/net/wireless/mediatek/Kconfig" +source "drivers/net/wireless/ralink/Kconfig" +source "drivers/net/wireless/realtek/Kconfig" +source "drivers/net/wireless/rsi/Kconfig" +source "drivers/net/wireless/st/Kconfig" +source "drivers/net/wireless/ti/Kconfig" +source "drivers/net/wireless/zydas/Kconfig" + config PCMCIA_RAYCS tristate "Aviator/Raytheon 2.4GHz wireless support" depends on PCMCIA @@ -32,110 +48,6 @@ config PCMCIA_RAYCS To compile this driver as a module, choose M here: the module will be called ray_cs. If unsure, say N. -config LIBERTAS_THINFIRM - tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" - depends on MAC80211 - select FW_LOADER - ---help--- - A library for Marvell Libertas 8xxx devices using thinfirm. - -config LIBERTAS_THINFIRM_DEBUG - bool "Enable full debugging output in the Libertas thin firmware module." - depends on LIBERTAS_THINFIRM - ---help--- - Debugging support. - -config LIBERTAS_THINFIRM_USB - tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" - depends on LIBERTAS_THINFIRM && USB - ---help--- - A driver for Marvell Libertas 8388 USB devices using thinfirm. - -config AIRO - tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" - depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN) - select WIRELESS_EXT - select CRYPTO - select WEXT_SPY - select WEXT_PRIV - ---help--- - This is the standard Linux driver to support Cisco/Aironet ISA and - PCI 802.11 wireless cards. - It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X - - with or without encryption) as well as card before the Cisco - acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). - - This driver support both the standard Linux Wireless Extensions - and Cisco proprietary API, so both the Linux Wireless Tools and the - Cisco Linux utilities can be used to configure the card. - - The driver can be compiled as a module and will be named "airo". - -config ATMEL - tristate "Atmel at76c50x chipset 802.11b support" - depends on CFG80211 && (PCI || PCMCIA) - select WIRELESS_EXT - select WEXT_PRIV - select FW_LOADER - select CRC32 - ---help--- - A driver 802.11b wireless cards based on the Atmel fast-vnet - chips. This driver supports standard Linux wireless extensions. - - Many cards based on this chipset do not have flash memory - and need their firmware loaded at start-up. If yours is - one of these, you will need to provide a firmware image - to be loaded into the card by the driver. The Atmel - firmware package can be downloaded from - <http://www.thekelleys.org.uk/atmel> - -config PCI_ATMEL - tristate "Atmel at76c506 PCI cards" - depends on ATMEL && PCI - ---help--- - Enable support for PCI and mini-PCI cards containing the - Atmel at76c506 chip. - -config PCMCIA_ATMEL - tristate "Atmel at76c502/at76c504 PCMCIA cards" - depends on ATMEL && PCMCIA - select WIRELESS_EXT - select FW_LOADER - select CRC32 - ---help--- - Enable support for PCMCIA cards containing the - Atmel at76c502 and at76c504 chips. - -config AT76C50X_USB - tristate "Atmel at76c503/at76c505/at76c505a USB cards" - depends on MAC80211 && USB - select FW_LOADER - ---help--- - Enable support for USB Wireless devices using Atmel at76c503, - at76c505 or at76c505a chips. - -config AIRO_CS - tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" - depends on CFG80211 && PCMCIA && (BROKEN || !M32R) - select WIRELESS_EXT - select WEXT_SPY - select WEXT_PRIV - select CRYPTO - select CRYPTO_AES - ---help--- - This is the standard Linux driver to support Cisco/Aironet PCMCIA - 802.11 wireless cards. This driver is the same as the Aironet - driver part of the Linux Pcmcia package. - It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X - - with or without encryption) as well as card before the Cisco - acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also - supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom - 802.11b cards. - - This driver support both the standard Linux Wireless Extensions - and Cisco proprietary API, so both the Linux Wireless Tools and the - Cisco Linux utilities can be used to configure the card. - config PCMCIA_WL3501 tristate "Planet WL3501 PCMCIA cards" depends on CFG80211 && PCMCIA @@ -146,44 +58,18 @@ config PCMCIA_WL3501 It has basic support for Linux wireless extensions and initial micro support for ethtool. -config PRISM54 - tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)' - depends on PCI - select WIRELESS_EXT - select WEXT_SPY - select WEXT_PRIV - select FW_LOADER - ---help--- - This enables support for FullMAC PCI/Cardbus prism54 devices. This - driver is now deprecated in favor for the SoftMAC driver, p54pci. - p54pci supports FullMAC PCI/Cardbus devices as well. - - For more information refer to the p54 wiki: - - http://wireless.kernel.org/en/users/Drivers/p54 - - Note: You need a motherboard with DMA support to use any of these cards - - When built as module you get the module prism54 - -config USB_ZD1201 - tristate "USB ZD1201 based Wireless device support" - depends on CFG80211 && USB - select WIRELESS_EXT - select WEXT_PRIV - select FW_LOADER +config MAC80211_HWSIM + tristate "Simulated radio testing tool for mac80211" + depends on MAC80211 ---help--- - Say Y if you want to use wireless LAN adapters based on the ZyDAS - ZD1201 chip. - - This driver makes the adapter appear as a normal Ethernet interface, - typically on wlan0. - - The zd1201 device requires external firmware to be loaded. - This can be found at http://linux-lc100020.sourceforge.net/ + This driver is a developer testing tool that can be used to test + IEEE 802.11 networking stack (mac80211) functionality. This is not + needed for normal wireless LAN usage and is only for testing. See + Documentation/networking/mac80211_hwsim for more information on how + to use this tool. - To compile this driver as a module, choose M here: the - module will be called zd1201. + To compile this driver as a module, choose M here: the module will be + called mac80211_hwsim. If unsure, say N. config USB_NET_RNDIS_WLAN tristate "Wireless RNDIS USB support" @@ -214,76 +100,4 @@ config USB_NET_RNDIS_WLAN If you choose to build a module, it'll be called rndis_wlan. -config ADM8211 - tristate "ADMtek ADM8211 support" - depends on MAC80211 && PCI - select CRC32 - select EEPROM_93CX6 - ---help--- - This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. - These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: - - Xterasys Cardbus XN-2411b - Blitz NetWave Point PC - TrendNet 221pc - Belkin F5D6001 - SMC 2635W - Linksys WPC11 v1 - Fiberline FL-WL-200X - 3com Office Connect (3CRSHPW796) - Corega WLPCIB-11 - SMC 2602W V2 EU - D-Link DWL-520 Revision C - - However, some of these cards have been replaced with other chips - like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or - the Ralink RT2400 (SMC2635W) without a model number change. - - Thanks to Infineon-ADMtek for their support of this driver. - -source "drivers/net/wireless/realtek/rtl818x/Kconfig" - -config MAC80211_HWSIM - tristate "Simulated radio testing tool for mac80211" - depends on MAC80211 - ---help--- - This driver is a developer testing tool that can be used to test - IEEE 802.11 networking stack (mac80211) functionality. This is not - needed for normal wireless LAN usage and is only for testing. See - Documentation/networking/mac80211_hwsim for more information on how - to use this tool. - - To compile this driver as a module, choose M here: the module will be - called mac80211_hwsim. If unsure, say N. - -config MWL8K - tristate "Marvell 88W8xxx PCI/PCIe Wireless support" - depends on MAC80211 && PCI - ---help--- - This driver supports Marvell TOPDOG 802.11 wireless cards. - - To compile this driver as a module, choose M here: the module - will be called mwl8k. If unsure, say N. - -source "drivers/net/wireless/ath/Kconfig" -source "drivers/net/wireless/b43/Kconfig" -source "drivers/net/wireless/b43legacy/Kconfig" -source "drivers/net/wireless/brcm80211/Kconfig" -source "drivers/net/wireless/hostap/Kconfig" -source "drivers/net/wireless/ipw2x00/Kconfig" -source "drivers/net/wireless/iwlwifi/Kconfig" -source "drivers/net/wireless/iwlegacy/Kconfig" -source "drivers/net/wireless/libertas/Kconfig" -source "drivers/net/wireless/orinoco/Kconfig" -source "drivers/net/wireless/p54/Kconfig" -source "drivers/net/wireless/rt2x00/Kconfig" -source "drivers/net/wireless/mediatek/Kconfig" -source "drivers/net/wireless/realtek/rtlwifi/Kconfig" -source "drivers/net/wireless/realtek/rtl8xxxu/Kconfig" -source "drivers/net/wireless/ti/Kconfig" -source "drivers/net/wireless/zd1211rw/Kconfig" -source "drivers/net/wireless/mwifiex/Kconfig" -source "drivers/net/wireless/cw1200/Kconfig" -source "drivers/net/wireless/rsi/Kconfig" - endif # WLAN |