diff options
Diffstat (limited to 'drivers/net/usb/r8152.c')
-rw-r--r-- | drivers/net/usb/r8152.c | 94 |
1 files changed, 69 insertions, 25 deletions
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 161c25e18865..24d367280ecf 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -31,7 +31,7 @@ #define NETNEXT_VERSION "08" /* Information for net */ -#define NET_VERSION "3" +#define NET_VERSION "4" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>" @@ -116,6 +116,7 @@ #define USB_TX_DMA 0xd434 #define USB_TOLERANCE 0xd490 #define USB_LPM_CTRL 0xd41a +#define USB_BMU_RESET 0xd4b0 #define USB_UPS_CTRL 0xd800 #define USB_MISC_0 0xd81a #define USB_POWER_CUT 0xd80a @@ -338,6 +339,10 @@ #define TEST_MODE_DISABLE 0x00000001 #define TX_SIZE_ADJUST1 0x00000100 +/* USB_BMU_RESET */ +#define BMU_RESET_EP_IN 0x01 +#define BMU_RESET_EP_OUT 0x02 + /* USB_UPS_CTRL */ #define POWER_CUT 0x0100 @@ -602,7 +607,7 @@ struct r8152 { struct list_head rx_done, tx_free; struct sk_buff_head tx_queue, rx_queue; spinlock_t rx_lock, tx_lock; - struct delayed_work schedule; + struct delayed_work schedule, hw_phy_work; struct mii_if_info mii; struct mutex control; /* use for hw setting */ #ifdef CONFIG_PM_SLEEP @@ -619,6 +624,7 @@ struct r8152 { int (*eee_get)(struct r8152 *, struct ethtool_eee *); int (*eee_set)(struct r8152 *, struct ethtool_eee *); bool (*in_nway)(struct r8152 *); + void (*hw_phy_cfg)(struct r8152 *); } rtl_ops; int intr_interval; @@ -627,8 +633,11 @@ struct r8152 { u32 tx_qlen; u32 coalesce; u16 ocp_base; + u16 speed; u8 *intr_buff; u8 version; + u8 duplex; + u8 autoneg; }; enum rtl_version { @@ -2169,7 +2178,7 @@ static void r8153_set_rx_early_timeout(struct r8152 *tp) static void r8153_set_rx_early_size(struct r8152 *tp) { u32 mtu = tp->netdev->mtu; - u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4; + u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 8; ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data); } @@ -2456,6 +2465,17 @@ static void r8153_teredo_off(struct r8152 *tp) ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0); } +static void rtl_reset_bmu(struct r8152 *tp) +{ + u32 ocp_data; + + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET); + ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT); + ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); + ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT; + ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data); +} + static void r8152_aldps_en(struct r8152 *tp, bool enable) { if (enable) { @@ -2499,8 +2519,6 @@ static void r8152b_exit_oob(struct r8152 *tp) rxdy_gated_en(tp, true); r8153_teredo_off(tp); - r8152b_hw_phy_cfg(tp); - ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00); @@ -2678,9 +2696,8 @@ static void r8153_first_init(struct r8152 *tp) ocp_data &= ~RCR_ACPT_ALL; ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); - r8153_hw_phy_cfg(tp); - rtl8152_nic_reset(tp); + rtl_reset_bmu(tp); ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ocp_data &= ~NOW_IS_OOB; @@ -2742,6 +2759,7 @@ static void r8153_enter_oob(struct r8152 *tp) ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); rtl_disable(tp); + rtl_reset_bmu(tp); for (i = 0; i < 1000; i++) { ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); @@ -2803,6 +2821,7 @@ static void rtl8153_disable(struct r8152 *tp) { r8153_aldps_en(tp, false); rtl_disable(tp); + rtl_reset_bmu(tp); r8153_aldps_en(tp, true); usb_enable_lpm(tp->udev); } @@ -2872,7 +2891,7 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) bmcr = BMCR_ANENABLE | BMCR_ANRESTART; } - if (test_bit(PHY_RESET, &tp->flags)) + if (test_and_clear_bit(PHY_RESET, &tp->flags)) bmcr |= BMCR_RESET; if (tp->mii.supports_gmii) @@ -2881,7 +2900,7 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) r8152_mdio_write(tp, MII_ADVERTISE, anar); r8152_mdio_write(tp, MII_BMCR, bmcr); - if (test_and_clear_bit(PHY_RESET, &tp->flags)) { + if (bmcr & BMCR_RESET) { int i; for (i = 0; i < 50; i++) { @@ -3040,6 +3059,27 @@ out1: usb_autopm_put_interface(tp->intf); } +static void rtl_hw_phy_work_func_t(struct work_struct *work) +{ + struct r8152 *tp = container_of(work, struct r8152, hw_phy_work.work); + + if (test_bit(RTL8152_UNPLUG, &tp->flags)) + return; + + if (usb_autopm_get_interface(tp->intf) < 0) + return; + + mutex_lock(&tp->control); + + tp->rtl_ops.hw_phy_cfg(tp); + + rtl8152_set_speed(tp, tp->autoneg, tp->speed, tp->duplex); + + mutex_unlock(&tp->control); + + usb_autopm_put_interface(tp->intf); +} + #ifdef CONFIG_PM_SLEEP static int rtl_notifier(struct notifier_block *nb, unsigned long action, void *data) @@ -3088,9 +3128,6 @@ static int rtl8152_open(struct net_device *netdev) tp->rtl_ops.up(tp); - rtl8152_set_speed(tp, AUTONEG_ENABLE, - tp->mii.supports_gmii ? SPEED_1000 : SPEED_100, - DUPLEX_FULL); netif_carrier_off(netdev); netif_start_queue(netdev); set_bit(WORK_ENABLE, &tp->flags); @@ -3382,15 +3419,11 @@ static void r8153_init(struct r8152 *tp) r8153_power_cut_en(tp, false); r8153_u1u2en(tp, true); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, - PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN | - U1U2_SPDWN_EN | L1_SPDWN_EN); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, - PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN | - TP100_SPDWN_EN | TP500_SPDWN_EN | TP1000_SPDWN_EN | - EEE_SPDWN_EN); + /* MAC clock speed down */ + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); r8153_enable_eee(tp); r8153_aldps_en(tp, true); @@ -3518,6 +3551,7 @@ static int rtl8152_resume(struct usb_interface *intf) if (!test_bit(SELECTIVE_SUSPEND, &tp->flags)) { tp->rtl_ops.init(tp); + queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0); netif_device_attach(tp->netdev); } @@ -3532,10 +3566,6 @@ static int rtl8152_resume(struct usb_interface *intf) napi_enable(&tp->napi); } else { tp->rtl_ops.up(tp); - rtl8152_set_speed(tp, AUTONEG_ENABLE, - tp->mii.supports_gmii ? - SPEED_1000 : SPEED_100, - DUPLEX_FULL); netif_carrier_off(tp->netdev); set_bit(WORK_ENABLE, &tp->flags); } @@ -3665,6 +3695,11 @@ static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) mutex_lock(&tp->control); ret = rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex); + if (!ret) { + tp->autoneg = cmd->autoneg; + tp->speed = cmd->speed; + tp->duplex = cmd->duplex; + } mutex_unlock(&tp->control); @@ -4122,6 +4157,7 @@ static int rtl_ops_init(struct r8152 *tp) ops->eee_get = r8152_get_eee; ops->eee_set = r8152_set_eee; ops->in_nway = rtl8152_in_nway; + ops->hw_phy_cfg = r8152b_hw_phy_cfg; break; case RTL_VER_03: @@ -4137,6 +4173,7 @@ static int rtl_ops_init(struct r8152 *tp) ops->eee_get = r8153_get_eee; ops->eee_set = r8153_set_eee; ops->in_nway = rtl8153_in_nway; + ops->hw_phy_cfg = r8153_hw_phy_cfg; break; default: @@ -4183,6 +4220,7 @@ static int rtl8152_probe(struct usb_interface *intf, mutex_init(&tp->control); INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t); + INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t); netdev->netdev_ops = &rtl8152_netdev_ops; netdev->watchdog_timeo = RTL8152_TX_TIMEOUT; @@ -4222,9 +4260,14 @@ static int rtl8152_probe(struct usb_interface *intf, break; } + tp->autoneg = AUTONEG_ENABLE; + tp->speed = tp->mii.supports_gmii ? SPEED_1000 : SPEED_100; + tp->duplex = DUPLEX_FULL; + intf->needs_remote_wakeup = 1; tp->rtl_ops.init(tp); + queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0); set_ethernet_addr(tp); usb_set_intfdata(intf, tp); @@ -4270,6 +4313,7 @@ static void rtl8152_disconnect(struct usb_interface *intf) netif_napi_del(&tp->napi); unregister_netdev(tp->netdev); + cancel_delayed_work_sync(&tp->hw_phy_work); tp->rtl_ops.unload(tp); free_netdev(tp->netdev); } |