diff options
Diffstat (limited to 'drivers/net/s2io.c')
| -rw-r--r-- | drivers/net/s2io.c | 44 |
1 files changed, 22 insertions, 22 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 1a4979f27fb5..458daa06ed41 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -63,6 +63,7 @@ #include <linux/kernel.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/mdio.h> #include <linux/skbuff.h> #include <linux/init.h> #include <linux/delay.h> @@ -1763,7 +1764,7 @@ static int init_nic(struct s2io_nic *nic) * by then we return error. */ time = 0; - while (TRUE) { + while (true) { val64 = readq(&bar0->rti_command_mem); if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) break; @@ -2136,7 +2137,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag) herc = (sp->device_type == XFRAME_II_DEVICE); - if (flag == FALSE) { + if (flag == false) { if ((!herc && (sp->pdev->revision >= 4)) || herc) { if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE)) ret = 1; @@ -3328,9 +3329,9 @@ static void s2io_updt_xpak_counter(struct net_device *dev) struct stat_block *stat_info = sp->mac_control.stats_info; /* Check the communication with the MDIO slave */ - addr = 0x0000; + addr = MDIO_CTRL1; val64 = 0x0; - val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev); + val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); if((val64 == 0xFFFF) || (val64 == 0x0000)) { DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - " @@ -3338,24 +3339,24 @@ static void s2io_updt_xpak_counter(struct net_device *dev) return; } - /* Check for the expecte value of 2040 at PMA address 0x0000 */ - if(val64 != 0x2040) + /* Check for the expected value of control reg 1 */ + if(val64 != MDIO_CTRL1_SPEED10G) { DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "); - DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x2040\n", - (unsigned long long)val64); + DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x%x\n", + (unsigned long long)val64, MDIO_CTRL1_SPEED10G); return; } /* Loading the DOM register to MDIO register */ addr = 0xA100; - s2io_mdio_write(MDIO_MMD_PMA_DEV_ADDR, addr, val16, dev); - val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev); + s2io_mdio_write(MDIO_MMD_PMAPMD, addr, val16, dev); + val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); /* Reading the Alarm flags */ addr = 0xA070; val64 = 0x0; - val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev); + val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); flag = CHECKBIT(val64, 0x7); type = 1; @@ -3387,7 +3388,7 @@ static void s2io_updt_xpak_counter(struct net_device *dev) /* Reading the Warning flags */ addr = 0xA074; val64 = 0x0; - val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev); + val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev); if(CHECKBIT(val64, 0x7)) stat_info->xpak_stat.warn_transceiver_temp_high++; @@ -3586,7 +3587,7 @@ static void s2io_reset(struct s2io_nic * sp) writeq(val64, &bar0->pcc_err_reg); } - sp->device_enabled_once = FALSE; + sp->device_enabled_once = false; } /** @@ -4298,7 +4299,6 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) s2io_stop_tx_queue(sp, fifo->fifo_no); } mac_control->stats_info->sw_stat.mem_allocated += skb->truesize; - dev->trans_start = jiffies; spin_unlock_irqrestore(&fifo->tx_lock, flags); if (sp->config.intr_type == MSI_X) @@ -5572,10 +5572,10 @@ static void s2io_ethtool_getpause_data(struct net_device *dev, val64 = readq(&bar0->rmac_pause_cfg); if (val64 & RMAC_PAUSE_GEN_ENABLE) - ep->tx_pause = TRUE; + ep->tx_pause = true; if (val64 & RMAC_PAUSE_RX_ENABLE) - ep->rx_pause = TRUE; - ep->autoneg = FALSE; + ep->rx_pause = true; + ep->autoneg = false; } /** @@ -6806,7 +6806,7 @@ static void s2io_set_link(struct work_struct *work) val64 |= ADAPTER_LED_ON; writeq(val64, &bar0->adapter_control); } - nic->device_enabled_once = TRUE; + nic->device_enabled_once = true; } else { DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name); DBG_PRINT(ERR_DBG, "device is not Quiescent\n"); @@ -7754,7 +7754,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) struct s2io_nic *sp; struct net_device *dev; int i, j, ret; - int dma_flag = FALSE; + int dma_flag = false; u32 mac_up, mac_down; u64 val64 = 0, tmp64 = 0; struct XENA_dev_config __iomem *bar0 = NULL; @@ -7777,7 +7777,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n"); - dma_flag = TRUE; + dma_flag = true; if (pci_set_consistent_dma_mask (pdev, DMA_BIT_MASK(64))) { DBG_PRINT(ERR_DBG, @@ -7818,7 +7818,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) sp->dev = dev; sp->pdev = pdev; sp->high_dma_flag = dma_flag; - sp->device_enabled_once = FALSE; + sp->device_enabled_once = false; if (rx_ring_mode == 1) sp->rxd_mode = RXD_MODE_1; if (rx_ring_mode == 2) @@ -7964,7 +7964,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; - if (sp->high_dma_flag == TRUE) + if (sp->high_dma_flag == true) dev->features |= NETIF_F_HIGHDMA; dev->features |= NETIF_F_TSO; dev->features |= NETIF_F_TSO6; |