diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/net/phy/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/phy/broadcom.c | 201 | ||||
| -rw-r--r-- | drivers/net/phy/mdio-bitbang.c | 2 | ||||
| -rw-r--r-- | drivers/net/phy/mdio-ofgpio.c | 205 |
5 files changed, 415 insertions, 3 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 6eb2d31d1e34..d55932acd887 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -53,7 +53,8 @@ config SMSC_PHY config BROADCOM_PHY tristate "Drivers for Broadcom PHYs" ---help--- - Currently supports the BCM5411, BCM5421 and BCM5461 PHYs. + Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481 + and BCM5482 PHYs. config ICPLUS_PHY tristate "Drivers for ICPlus PHYs" @@ -83,4 +84,10 @@ config MDIO_BITBANG If in doubt, say N. +config MDIO_OF_GPIO + tristate "Support for GPIO lib-based bitbanged MDIO buses" + depends on MDIO_BITBANG && OF_GPIO + ---help--- + Supports GPIO lib-based MDIO busses. + endif # PHYLIB diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 5997d6ef702b..eee329fa6f53 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o obj-$(CONFIG_REALTEK_PHY) += realtek.o obj-$(CONFIG_FIXED_PHY) += fixed.o obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o +obj-$(CONFIG_MDIO_OF_GPIO) += mdio-ofgpio.o diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 60c5cfe96918..4b4dc98ad165 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -24,6 +24,12 @@ #define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */ #define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */ +#define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */ +#define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ +#define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ +#define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ + +#define MII_BCM54XX_AUX_CTL 0x18 /* Auxiliary control register */ #define MII_BCM54XX_ISR 0x1a /* BCM54xx interrupt status register */ #define MII_BCM54XX_IMR 0x1b /* BCM54xx interrupt mask register */ #define MII_BCM54XX_INT_CRCERR 0x0001 /* CRC error */ @@ -42,10 +48,120 @@ #define MII_BCM54XX_INT_MDIX 0x2000 /* MDIX status change */ #define MII_BCM54XX_INT_PSERR 0x4000 /* Pair swap error */ +#define MII_BCM54XX_SHD 0x1c /* 0x1c shadow registers */ +#define MII_BCM54XX_SHD_WRITE 0x8000 +#define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10) +#define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0) + +/* + * Broadcom LED source encodings. These are used in BCM5461, BCM5481, + * BCM5482, and possibly some others. + */ +#define BCM_LED_SRC_LINKSPD1 0x0 +#define BCM_LED_SRC_LINKSPD2 0x1 +#define BCM_LED_SRC_XMITLED 0x2 +#define BCM_LED_SRC_ACTIVITYLED 0x3 +#define BCM_LED_SRC_FDXLED 0x4 +#define BCM_LED_SRC_SLAVE 0x5 +#define BCM_LED_SRC_INTR 0x6 +#define BCM_LED_SRC_QUALITY 0x7 +#define BCM_LED_SRC_RCVLED 0x8 +#define BCM_LED_SRC_MULTICOLOR1 0xa +#define BCM_LED_SRC_OPENSHORT 0xb +#define BCM_LED_SRC_OFF 0xe /* Tied high */ +#define BCM_LED_SRC_ON 0xf /* Tied low */ + +/* + * BCM5482: Shadow registers + * Shadow values go into bits [14:10] of register 0x1c to select a shadow + * register to access. + */ +#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */ + /* LED3 / ~LINKSPD[2] selector */ +#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4) + /* LED1 / ~LINKSPD[1] selector */ +#define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0) +#define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */ +#define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */ +#define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */ +#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */ +#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */ + +/* + * BCM5482: Secondary SerDes registers + */ +#define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */ +#define BCM5482_SSD_1000BX_CTL_PWRDOWN 0x0800 /* Power-down SSD */ +#define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */ +#define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */ +#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */ + +/* + * Device flags for PHYs that can be configured for different operating + * modes. + */ +#define PHY_BCM_FLAGS_VALID 0x80000000 +#define PHY_BCM_FLAGS_INTF_XAUI 0x00000020 +#define PHY_BCM_FLAGS_INTF_SGMII 0x00000010 +#define PHY_BCM_FLAGS_MODE_1000BX 0x00000002 +#define PHY_BCM_FLAGS_MODE_COPPER 0x00000001 + MODULE_DESCRIPTION("Broadcom PHY driver"); MODULE_AUTHOR("Maciej W. Rozycki"); MODULE_LICENSE("GPL"); +/* + * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T + * 0x1c shadow registers. + */ +static int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow) +{ + phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow)); + return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD)); +} + +static int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow, u16 val) +{ + return phy_write(phydev, MII_BCM54XX_SHD, + MII_BCM54XX_SHD_WRITE | + MII_BCM54XX_SHD_VAL(shadow) | + MII_BCM54XX_SHD_DATA(val)); +} + +/* + * Indirect register access functions for the Expansion Registers + * and Secondary SerDes registers (when sec_serdes=1). + */ +static int bcm54xx_exp_read(struct phy_device *phydev, + int sec_serdes, u8 regnum) +{ + int val; + + phy_write(phydev, MII_BCM54XX_EXP_SEL, + (sec_serdes ? MII_BCM54XX_EXP_SEL_SSD : + MII_BCM54XX_EXP_SEL_ER) | + regnum); + val = phy_read(phydev, MII_BCM54XX_EXP_DATA); + phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); + + return val; +} + +static int bcm54xx_exp_write(struct phy_device *phydev, + int sec_serdes, u8 regnum, u16 val) +{ + int ret; + + phy_write(phydev, MII_BCM54XX_EXP_SEL, + (sec_serdes ? MII_BCM54XX_EXP_SEL_SSD : + MII_BCM54XX_EXP_SEL_ER) | + regnum); + ret = phy_write(phydev, MII_BCM54XX_EXP_DATA, val); + phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); + + return ret; +} + static int bcm54xx_config_init(struct phy_device *phydev) { int reg, err; @@ -70,6 +186,87 @@ static int bcm54xx_config_init(struct phy_device *phydev) return 0; } +static int bcm5482_config_init(struct phy_device *phydev) +{ + int err, reg; + + err = bcm54xx_config_init(phydev); + + if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) { + /* + * Enable secondary SerDes and its use as an LED source + */ + reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_SSD); + bcm54xx_shadow_write(phydev, BCM5482_SHD_SSD, + reg | + BCM5482_SHD_SSD_LEDM | + BCM5482_SHD_SSD_EN); + + /* + * Enable SGMII slave mode and auto-detection + */ + reg = bcm54xx_exp_read(phydev, 1, BCM5482_SSD_SGMII_SLAVE); + bcm54xx_exp_write(phydev, 1, BCM5482_SSD_SGMII_SLAVE, + reg | + BCM5482_SSD_SGMII_SLAVE_EN | + BCM5482_SSD_SGMII_SLAVE_AD); + + /* + * Disable secondary SerDes powerdown + */ + reg = bcm54xx_exp_read(phydev, 1, BCM5482_SSD_1000BX_CTL); + bcm54xx_exp_write(phydev, 1, BCM5482_SSD_1000BX_CTL, + reg & ~BCM5482_SSD_1000BX_CTL_PWRDOWN); + + /* + * Select 1000BASE-X register set (primary SerDes) + */ + reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_MODE); + bcm54xx_shadow_write(phydev, BCM5482_SHD_MODE, + reg | BCM5482_SHD_MODE_1000BX); + + /* + * LED1=ACTIVITYLED, LED3=LINKSPD[2] + * (Use LED1 as secondary SerDes ACTIVITY LED) + */ + bcm54xx_shadow_write(phydev, BCM5482_SHD_LEDS1, + BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) | + BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD2)); + + /* + * Auto-negotiation doesn't seem to work quite right + * in this mode, so we disable it and force it to the + * right speed/duplex setting. Only 'link status' + * is important. + */ + phydev->autoneg = AUTONEG_DISABLE; + phydev->speed = SPEED_1000; + phydev->duplex = DUPLEX_FULL; + } + + return err; +} + +static int bcm5482_read_status(struct phy_device *phydev) +{ + int err; + + err = genphy_read_status(phydev); + + if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) { + /* + * Only link status matters for 1000Base-X mode, so force + * 1000 Mbit/s full-duplex status + */ + if (phydev->link) { + phydev->speed = SPEED_1000; + phydev->duplex = DUPLEX_FULL; + } + } + + return err; +} + static int bcm54xx_ack_interrupt(struct phy_device *phydev) { int reg; @@ -210,9 +407,9 @@ static struct phy_driver bcm5482_driver = { .name = "Broadcom BCM5482", .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, - .config_init = bcm54xx_config_init, + .config_init = bcm5482_config_init, .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, + .read_status = bcm5482_read_status, .ack_interrupt = bcm54xx_ack_interrupt, .config_intr = bcm54xx_config_intr, .driver = { .owner = THIS_MODULE }, diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c index 2747b1f89ffe..c01b78013ddc 100644 --- a/drivers/net/phy/mdio-bitbang.c +++ b/drivers/net/phy/mdio-bitbang.c @@ -177,6 +177,7 @@ struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl) return bus; } +EXPORT_SYMBOL(alloc_mdio_bitbang); void free_mdio_bitbang(struct mii_bus *bus) { @@ -185,5 +186,6 @@ void free_mdio_bitbang(struct mii_bus *bus) module_put(ctrl->ops->owner); kfree(bus); } +EXPORT_SYMBOL(free_mdio_bitbang); MODULE_LICENSE("GPL"); diff --git a/drivers/net/phy/mdio-ofgpio.c b/drivers/net/phy/mdio-ofgpio.c new file mode 100644 index 000000000000..7edfc0c34835 --- /dev/null +++ b/drivers/net/phy/mdio-ofgpio.c @@ -0,0 +1,205 @@ +/* + * OpenFirmware GPIO based MDIO bitbang driver. + * + * Copyright (c) 2008 CSE Semaphore Belgium. + * by Laurent Pinchart <laurentp@cse-semaphore.com> + * + * Based on earlier work by + * + * Copyright (c) 2003 Intracom S.A. + * by Pantelis Antoniou <panto@intracom.gr> + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/mdio-bitbang.h> +#include <linux/of_gpio.h> +#include <linux/of_platform.h> + +struct mdio_gpio_info { + struct mdiobb_ctrl ctrl; + int mdc, mdio; +}; + +static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir) +{ + struct mdio_gpio_info *bitbang = + container_of(ctrl, struct mdio_gpio_info, ctrl); + + if (dir) + gpio_direction_output(bitbang->mdio, 1); + else + gpio_direction_input(bitbang->mdio); +} + +static int mdio_read(struct mdiobb_ctrl *ctrl) +{ + struct mdio_gpio_info *bitbang = + container_of(ctrl, struct mdio_gpio_info, ctrl); + + return gpio_get_value(bitbang->mdio); +} + +static void mdio(struct mdiobb_ctrl *ctrl, int what) +{ + struct mdio_gpio_info *bitbang = + container_of(ctrl, struct mdio_gpio_info, ctrl); + + gpio_set_value(bitbang->mdio, what); +} + +static void mdc(struct mdiobb_ctrl *ctrl, int what) +{ + struct mdio_gpio_info *bitbang = + container_of(ctrl, struct mdio_gpio_info, ctrl); + + gpio_set_value(bitbang->mdc, what); +} + +static struct mdiobb_ops mdio_gpio_ops = { + .owner = THIS_MODULE, + .set_mdc = mdc, + .set_mdio_dir = mdio_dir, + .set_mdio_data = mdio, + .get_mdio_data = mdio_read, +}; + +static int __devinit mdio_ofgpio_bitbang_init(struct mii_bus *bus, + struct device_node *np) +{ + struct mdio_gpio_info *bitbang = bus->priv; + + bitbang->mdc = of_get_gpio(np, 0); + bitbang->mdio = of_get_gpio(np, 1); + + if (bitbang->mdc < 0 || bitbang->mdio < 0) + return -ENODEV; + + snprintf(bus->id, MII_BUS_ID_SIZE, "%x", bitbang->mdc); + return 0; +} + +static void __devinit add_phy(struct mii_bus *bus, struct device_node *np) +{ + const u32 *data; + int len, id, irq; + + data = of_get_property(np, "reg", &len); + if (!data || len != 4) + return; + + id = *data; + bus->phy_mask &= ~(1 << id); + + irq = of_irq_to_resource(np, 0, NULL); + if (irq != NO_IRQ) + bus->irq[id] = irq; +} + +static int __devinit mdio_ofgpio_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = NULL; + struct mii_bus *new_bus; + struct mdio_gpio_info *bitbang; + int ret = -ENOMEM; + int i; + + bitbang = kzalloc(sizeof(struct mdio_gpio_info), GFP_KERNEL); + if (!bitbang) + goto out; + + bitbang->ctrl.ops = &mdio_gpio_ops; + + new_bus = alloc_mdio_bitbang(&bitbang->ctrl); + if (!new_bus) + goto out_free_priv; + + new_bus->name = "GPIO Bitbanged MII", + + ret = mdio_ofgpio_bitbang_init(new_bus, ofdev->node); + if (ret) + goto out_free_bus; + + new_bus->phy_mask = ~0; + new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (!new_bus->irq) + goto out_free_bus; + + for (i = 0; i < PHY_MAX_ADDR; i++) + new_bus->irq[i] = -1; + + while ((np = of_get_next_child(ofdev->node, np))) + if (!strcmp(np->type, "ethernet-phy")) + add_phy(new_bus, np); + + new_bus->dev = &ofdev->dev; + dev_set_drvdata(&ofdev->dev, new_bus); + + ret = mdiobus_register(new_bus); + if (ret) + goto out_free_irqs; + + return 0; + +out_free_irqs: + dev_set_drvdata(&ofdev->dev, NULL); + kfree(new_bus->irq); +out_free_bus: + kfree(new_bus); +out_free_priv: + free_mdio_bitbang(new_bus); +out: + return ret; +} + +static int mdio_ofgpio_remove(struct of_device *ofdev) +{ + struct mii_bus *bus = dev_get_drvdata(&ofdev->dev); + struct mdio_gpio_info *bitbang = bus->priv; + + mdiobus_unregister(bus); + free_mdio_bitbang(bus); + dev_set_drvdata(&ofdev->dev, NULL); + kfree(bus->irq); + kfree(bitbang); + kfree(bus); + + return 0; +} + +static struct of_device_id mdio_ofgpio_match[] = { + { + .compatible = "virtual,mdio-gpio", + }, + {}, +}; + +static struct of_platform_driver mdio_ofgpio_driver = { + .name = "mdio-gpio", + .match_table = mdio_ofgpio_match, + .probe = mdio_ofgpio_probe, + .remove = mdio_ofgpio_remove, +}; + +static int mdio_ofgpio_init(void) +{ + return of_register_platform_driver(&mdio_ofgpio_driver); +} + +static void mdio_ofgpio_exit(void) +{ + of_unregister_platform_driver(&mdio_ofgpio_driver); +} + +module_init(mdio_ofgpio_init); +module_exit(mdio_ofgpio_exit); |