summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel')
-rw-r--r--drivers/net/ethernet/intel/e1000e/defines.h21
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c42
-rw-r--r--drivers/net/ethernet/intel/e1000e/mac.c25
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c37
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c8
5 files changed, 71 insertions, 62 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index afb7ebe20b24..824fd44e25f0 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -400,6 +400,10 @@
#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
#define E1000_ICR_RXO 0x00000040 /* Receiver Overrun */
#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO Access Complete */
+#define E1000_ICR_SRPD 0x00010000 /* Small Receive Packet Detected */
+#define E1000_ICR_ACK 0x00020000 /* Receive ACK Frame Detected */
+#define E1000_ICR_MNG 0x00040000 /* Manageability Event Detected */
#define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */
/* If this bit asserted, the driver should claim the interrupt */
#define E1000_ICR_INT_ASSERTED 0x80000000
@@ -407,7 +411,7 @@
#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
#define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
-#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
+#define E1000_ICR_OTHER 0x01000000 /* Other Interrupt */
/* PBA ECC Register */
#define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */
@@ -431,12 +435,27 @@
E1000_IMS_RXSEQ | \
E1000_IMS_LSC)
+/* These are all of the events related to the OTHER interrupt.
+ */
+#define IMS_OTHER_MASK ( \
+ E1000_IMS_LSC | \
+ E1000_IMS_RXO | \
+ E1000_IMS_MDAC | \
+ E1000_IMS_SRPD | \
+ E1000_IMS_ACK | \
+ E1000_IMS_MNG)
+
/* Interrupt Mask Set */
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* Receiver Overrun */
#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO Access Complete */
+#define E1000_IMS_SRPD E1000_ICR_SRPD /* Small Receive Packet */
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive ACK Frame Detected */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability Event */
#define E1000_IMS_ECCER E1000_ICR_ECCER /* Uncorrectable ECC Error */
#define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
#define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 31277d3bb7dc..1dddfb7b2de6 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1367,9 +1367,6 @@ out:
* Checks to see of the link status of the hardware has changed. If a
* change in link status has been detected, then we read the PHY registers
* to get the current speed/duplex if link exists.
- *
- * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link
- * up).
**/
static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
{
@@ -1385,7 +1382,8 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
* Change or Rx Sequence Error interrupt.
*/
if (!mac->get_link_status)
- return 1;
+ return 0;
+ mac->get_link_status = false;
/* First we want to see if the MII Status Register reports
* link. If so, then we want to get the current speed/duplex
@@ -1393,12 +1391,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
*/
ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
if (ret_val)
- return ret_val;
+ goto out;
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000_k1_gig_workaround_hv(hw, link);
if (ret_val)
- return ret_val;
+ goto out;
}
/* When connected at 10Mbps half-duplex, some parts are excessively
@@ -1431,7 +1429,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- return ret_val;
+ goto out;
if (hw->mac.type == e1000_pch2lan)
emi_addr = I82579_RX_CONFIG;
@@ -1453,7 +1451,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
hw->phy.ops.release(hw);
if (ret_val)
- return ret_val;
+ goto out;
if (hw->mac.type >= e1000_pch_spt) {
u16 data;
@@ -1462,14 +1460,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
if (speed == SPEED_1000) {
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- return ret_val;
+ goto out;
ret_val = e1e_rphy_locked(hw,
PHY_REG(776, 20),
&data);
if (ret_val) {
hw->phy.ops.release(hw);
- return ret_val;
+ goto out;
}
ptr_gap = (data & (0x3FF << 2)) >> 2;
@@ -1483,18 +1481,18 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
}
hw->phy.ops.release(hw);
if (ret_val)
- return ret_val;
+ goto out;
} else {
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- return ret_val;
+ goto out;
ret_val = e1e_wphy_locked(hw,
PHY_REG(776, 20),
0xC023);
hw->phy.ops.release(hw);
if (ret_val)
- return ret_val;
+ goto out;
}
}
@@ -1521,7 +1519,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
(hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3)) {
ret_val = e1000_k1_workaround_lpt_lp(hw, link);
if (ret_val)
- return ret_val;
+ goto out;
}
if (hw->mac.type >= e1000_pch_lpt) {
/* Set platform power management values for
@@ -1529,7 +1527,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
*/
ret_val = e1000_platform_pm_pch_lpt(hw, link);
if (ret_val)
- return ret_val;
+ goto out;
}
/* Clear link partner's EEE ability */
@@ -1552,9 +1550,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
}
if (!link)
- return 0; /* No link detected */
-
- mac->get_link_status = false;
+ goto out;
switch (hw->mac.type) {
case e1000_pch2lan:
@@ -1616,12 +1612,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
* different link partner.
*/
ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val) {
+ if (ret_val)
e_dbg("Error configuring flow control\n");
- return ret_val;
- }
- return 1;
+ return ret_val;
+
+out:
+ mac->get_link_status = true;
+ return ret_val;
}
static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index f457c5703d0c..5bdc3a2d4fd7 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -410,9 +410,6 @@ void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
* Checks to see of the link status of the hardware has changed. If a
* change in link status has been detected, then we read the PHY registers
* to get the current speed/duplex if link exists.
- *
- * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link
- * up).
**/
s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
{
@@ -426,20 +423,16 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
* Change or Rx Sequence Error interrupt.
*/
if (!mac->get_link_status)
- return 1;
+ return 0;
+ mac->get_link_status = false;
/* First we want to see if the MII Status Register reports
* link. If so, then we want to get the current speed/duplex
* of the PHY.
*/
ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
- if (ret_val)
- return ret_val;
-
- if (!link)
- return 0; /* No link detected */
-
- mac->get_link_status = false;
+ if (ret_val || !link)
+ goto out;
/* Check if there was DownShift, must be checked
* immediately after link-up
@@ -464,12 +457,14 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
* different link partner.
*/
ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val) {
+ if (ret_val)
e_dbg("Error configuring flow control\n");
- return ret_val;
- }
- return 1;
+ return ret_val;
+
+out:
+ mac->get_link_status = true;
+ return ret_val;
}
/**
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 1298b69f990b..dc853b0863af 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1914,30 +1914,20 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- u32 icr;
- bool enable = true;
-
- icr = er32(ICR);
- if (icr & E1000_ICR_RXO) {
- ew32(ICR, E1000_ICR_RXO);
- enable = false;
- /* napi poll will re-enable Other, make sure it runs */
- if (napi_schedule_prep(&adapter->napi)) {
- adapter->total_rx_bytes = 0;
- adapter->total_rx_packets = 0;
- __napi_schedule(&adapter->napi);
- }
- }
+ u32 icr = er32(ICR);
+
+ if (icr & adapter->eiac_mask)
+ ew32(ICS, (icr & adapter->eiac_mask));
+
if (icr & E1000_ICR_LSC) {
- ew32(ICR, E1000_ICR_LSC);
hw->mac.get_link_status = true;
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
- if (enable && !test_bit(__E1000_DOWN, &adapter->state))
- ew32(IMS, E1000_IMS_OTHER);
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ ew32(IMS, E1000_IMS_OTHER | IMS_OTHER_MASK);
return IRQ_HANDLED;
}
@@ -2040,7 +2030,6 @@ static void e1000_configure_msix(struct e1000_adapter *adapter)
hw->hw_addr + E1000_EITR_82574(vector));
else
writel(1, hw->hw_addr + E1000_EITR_82574(vector));
- adapter->eiac_mask |= E1000_IMS_OTHER;
/* Cause Tx interrupts on every write back */
ivar |= BIT(31);
@@ -2265,7 +2254,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
if (adapter->msix_entries) {
ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
- ew32(IMS, adapter->eiac_mask | E1000_IMS_LSC);
+ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER |
+ IMS_OTHER_MASK);
} else if (hw->mac.type >= e1000_pch_lpt) {
ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
} else {
@@ -2333,8 +2323,8 @@ static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
{
struct pci_dev *pdev = adapter->pdev;
- ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
- GFP_KERNEL);
+ ring->desc = dma_zalloc_coherent(&pdev->dev, ring->size, &ring->dma,
+ GFP_KERNEL);
if (!ring->desc)
return -ENOMEM;
@@ -2707,8 +2697,7 @@ static int e1000e_poll(struct napi_struct *napi, int weight)
napi_complete_done(napi, work_done);
if (!test_bit(__E1000_DOWN, &adapter->state)) {
if (adapter->msix_entries)
- ew32(IMS, adapter->rx_ring->ims_val |
- E1000_IMS_OTHER);
+ ew32(IMS, adapter->rx_ring->ims_val);
else
e1000_irq_enable(adapter);
}
@@ -5101,7 +5090,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
case e1000_media_type_copper:
if (hw->mac.get_link_status) {
ret_val = hw->mac.ops.check_for_link(hw);
- link_active = ret_val > 0;
+ link_active = !hw->mac.get_link_status;
} else {
link_active = true;
}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 0da5aa2c8aba..9fc063af233c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1888,6 +1888,14 @@ static void ixgbe_dma_sync_frag(struct ixgbe_ring *rx_ring,
ixgbe_rx_pg_size(rx_ring),
DMA_FROM_DEVICE,
IXGBE_RX_DMA_ATTR);
+ } else if (ring_uses_build_skb(rx_ring)) {
+ unsigned long offset = (unsigned long)(skb->data) & ~PAGE_MASK;
+
+ dma_sync_single_range_for_cpu(rx_ring->dev,
+ IXGBE_CB(skb)->dma,
+ offset,
+ skb_headlen(skb),
+ DMA_FROM_DEVICE);
} else {
struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];