diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.h | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 9 |
3 files changed, 16 insertions, 7 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index d6d4ed7acf03..31277d3bb7dc 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1367,6 +1367,9 @@ out: * Checks to see of the link status of the hardware has changed. If a * change in link status has been detected, then we read the PHY registers * to get the current speed/duplex if link exists. + * + * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link + * up). **/ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) { @@ -1382,7 +1385,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * Change or Rx Sequence Error interrupt. */ if (!mac->get_link_status) - return 0; + return 1; /* First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex @@ -1613,10 +1616,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * different link partner. */ ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) + if (ret_val) { e_dbg("Error configuring flow control\n"); + return ret_val; + } - return ret_val; + return 1; } static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index 67163ca898ba..00a36df02a3f 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -113,7 +113,8 @@ #define NVM_SIZE_MULTIPLIER 4096 /*multiplier for NVMS field */ #define E1000_FLASH_BASE_ADDR 0xE000 /*offset of NVM access regs */ #define E1000_CTRL_EXT_NVMVS 0x3 /*NVM valid sector */ -#define E1000_TARC0_CB_MULTIQ_3_REQ (1 << 28 | 1 << 29) +#define E1000_TARC0_CB_MULTIQ_3_REQ 0x30000000 +#define E1000_TARC0_CB_MULTIQ_2_REQ 0x20000000 #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index f2f49239b015..9f18d39bdc8f 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3034,9 +3034,12 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) ew32(IOSFPC, reg_val); reg_val = er32(TARC(0)); - /* SPT and KBL Si errata workaround to avoid Tx hang */ - reg_val &= ~BIT(28); - reg_val |= BIT(29); + /* SPT and KBL Si errata workaround to avoid Tx hang. + * Dropping the number of outstanding requests from + * 3 to 2 in order to avoid a buffer overrun. + */ + reg_val &= ~E1000_TARC0_CB_MULTIQ_3_REQ; + reg_val |= E1000_TARC0_CB_MULTIQ_2_REQ; ew32(TARC(0), reg_val); } } |