diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 205 |
1 files changed, 177 insertions, 28 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index c509a5c900f5..e62b9dcb91fe 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1,5 +1,5 @@ /* Intel PRO/1000 Linux driver - * Copyright(c) 1999 - 2014 Intel Corporation. + * Copyright(c) 1999 - 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -48,7 +48,7 @@ #define DRV_EXTRAVERSION "-k" -#define DRV_VERSION "2.3.2" DRV_EXTRAVERSION +#define DRV_VERSION "3.2.5" DRV_EXTRAVERSION char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -3525,22 +3525,30 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca) switch (hw->mac.type) { case e1000_pch2lan: case e1000_pch_lpt: - case e1000_pch_spt: - /* On I217, I218 and I219, the clock frequency is 25MHz - * or 96MHz as indicated by the System Clock Frequency - * Indication - */ - if (((hw->mac.type != e1000_pch_lpt) && - (hw->mac.type != e1000_pch_spt)) || - (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) { + if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) { /* Stable 96MHz frequency */ incperiod = INCPERIOD_96MHz; incvalue = INCVALUE_96MHz; shift = INCVALUE_SHIFT_96MHz; adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz; + } else { + /* Stable 25MHz frequency */ + incperiod = INCPERIOD_25MHz; + incvalue = INCVALUE_25MHz; + shift = INCVALUE_SHIFT_25MHz; + adapter->cc.shift = shift; + } + break; + case e1000_pch_spt: + if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) { + /* Stable 24MHz frequency */ + incperiod = INCPERIOD_24MHz; + incvalue = INCVALUE_24MHz; + shift = INCVALUE_SHIFT_24MHz; + adapter->cc.shift = shift; break; } - /* fall-through */ + return -EINVAL; case e1000_82574: case e1000_82583: /* Stable 25MHz frequency */ @@ -3788,6 +3796,108 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) } /** + * e1000_flush_tx_ring - remove all descriptors from the tx_ring + * + * We want to clear all pending descriptors from the TX ring. + * zeroing happens when the HW reads the regs. We assign the ring itself as + * the data of the next descriptor. We don't care about the data we are about + * to reset the HW. + */ +static void e1000_flush_tx_ring(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_tx_desc *tx_desc = NULL; + u32 tdt, tctl, txd_lower = E1000_TXD_CMD_IFCS; + u16 size = 512; + + tctl = er32(TCTL); + ew32(TCTL, tctl | E1000_TCTL_EN); + tdt = er32(TDT(0)); + BUG_ON(tdt != tx_ring->next_to_use); + tx_desc = E1000_TX_DESC(*tx_ring, tx_ring->next_to_use); + tx_desc->buffer_addr = tx_ring->dma; + + tx_desc->lower.data = cpu_to_le32(txd_lower | size); + tx_desc->upper.data = 0; + /* flush descriptors to memory before notifying the HW */ + wmb(); + tx_ring->next_to_use++; + if (tx_ring->next_to_use == tx_ring->count) + tx_ring->next_to_use = 0; + ew32(TDT(0), tx_ring->next_to_use); + mmiowb(); + usleep_range(200, 250); +} + +/** + * e1000_flush_rx_ring - remove all descriptors from the rx_ring + * + * Mark all descriptors in the RX ring as consumed and disable the rx ring + */ +static void e1000_flush_rx_ring(struct e1000_adapter *adapter) +{ + u32 rctl, rxdctl; + struct e1000_hw *hw = &adapter->hw; + + rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + e1e_flush(); + usleep_range(100, 150); + + rxdctl = er32(RXDCTL(0)); + /* zero the lower 14 bits (prefetch and host thresholds) */ + rxdctl &= 0xffffc000; + + /* update thresholds: prefetch threshold to 31, host threshold to 1 + * and make sure the granularity is "descriptors" and not "cache lines" + */ + rxdctl |= (0x1F | (1 << 8) | E1000_RXDCTL_THRESH_UNIT_DESC); + + ew32(RXDCTL(0), rxdctl); + /* momentarily enable the RX ring for the changes to take effect */ + ew32(RCTL, rctl | E1000_RCTL_EN); + e1e_flush(); + usleep_range(100, 150); + ew32(RCTL, rctl & ~E1000_RCTL_EN); +} + +/** + * e1000_flush_desc_rings - remove all descriptors from the descriptor rings + * + * In i219, the descriptor rings must be emptied before resetting the HW + * or before changing the device state to D3 during runtime (runtime PM). + * + * Failure to do this will cause the HW to enter a unit hang state which can + * only be released by PCI reset on the device + * + */ + +static void e1000_flush_desc_rings(struct e1000_adapter *adapter) +{ + u16 hang_state; + u32 fext_nvm11, tdlen; + struct e1000_hw *hw = &adapter->hw; + + /* First, disable MULR fix in FEXTNVM11 */ + fext_nvm11 = er32(FEXTNVM11); + fext_nvm11 |= E1000_FEXTNVM11_DISABLE_MULR_FIX; + ew32(FEXTNVM11, fext_nvm11); + /* do nothing if we're not in faulty state, or if the queue is empty */ + tdlen = er32(TDLEN(0)); + pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS, + &hang_state); + if (!(hang_state & FLUSH_DESC_REQUIRED) || !tdlen) + return; + e1000_flush_tx_ring(adapter); + /* recheck, maybe the fault is caused by the rx ring */ + pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS, + &hang_state); + if (hang_state & FLUSH_DESC_REQUIRED) + e1000_flush_rx_ring(adapter); +} + +/** * e1000e_reset - bring the hardware into a known good state * * This function boots the hardware and enables some settings that @@ -3807,7 +3917,7 @@ void e1000e_reset(struct e1000_adapter *adapter) /* reset Packet Buffer Allocation to default */ ew32(PBA, pba); - if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { + if (adapter->max_frame_size > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) { /* To maintain wire speed transmits, the Tx FIFO should be * large enough to accommodate two full transmit packets, * rounded up to the next 1KB and expressed in KB. Likewise, @@ -3943,6 +4053,8 @@ void e1000e_reset(struct e1000_adapter *adapter) } } + if (hw->mac.type == e1000_pch_spt) + e1000_flush_desc_rings(adapter); /* Allow time for pending master requests to run */ mac->ops.reset_hw(hw); @@ -4016,6 +4128,20 @@ void e1000e_reset(struct e1000_adapter *adapter) phy_data &= ~IGP02E1000_PM_SPD; e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); } + if (hw->mac.type == e1000_pch_spt && adapter->int_mode == 0) { + u32 reg; + + /* Fextnvm7 @ 0xe4[2] = 1 */ + reg = er32(FEXTNVM7); + reg |= E1000_FEXTNVM7_SIDE_CLK_UNGATE; + ew32(FEXTNVM7, reg); + /* Fextnvm9 @ 0x5bb4[13:12] = 11 */ + reg = er32(FEXTNVM9); + reg |= E1000_FEXTNVM9_IOSFSB_CLKGATE_DIS | + E1000_FEXTNVM9_IOSFSB_CLKREQ_DIS; + ew32(FEXTNVM9, reg); + } + } int e1000e_up(struct e1000_adapter *adapter) @@ -4115,8 +4241,6 @@ void e1000e_down(struct e1000_adapter *adapter, bool reset) spin_unlock(&adapter->stats64_lock); e1000e_flush_descriptors(adapter); - e1000_clean_tx_ring(adapter->tx_ring); - e1000_clean_rx_ring(adapter->rx_ring); adapter->link_speed = 0; adapter->link_duplex = 0; @@ -4127,8 +4251,14 @@ void e1000e_down(struct e1000_adapter *adapter, bool reset) e1000_lv_jumbo_workaround_ich8lan(hw, false)) e_dbg("failed to disable jumbo frame workaround mode\n"); - if (reset && !pci_channel_offline(adapter->pdev)) - e1000e_reset(adapter); + if (!pci_channel_offline(adapter->pdev)) { + if (reset) + e1000e_reset(adapter); + else if (hw->mac.type == e1000_pch_spt) + e1000_flush_desc_rings(adapter); + } + e1000_clean_tx_ring(adapter->tx_ring); + e1000_clean_rx_ring(adapter->rx_ring); } void e1000e_reinit_locked(struct e1000_adapter *adapter) @@ -4151,9 +4281,16 @@ static cycle_t e1000e_cyclecounter_read(const struct cyclecounter *cc) cc); struct e1000_hw *hw = &adapter->hw; cycle_t systim, systim_next; + /* SYSTIMH latching upon SYSTIML read does not work well. To fix that + * we don't want to allow overflow of SYSTIML and a change to SYSTIMH + * to occur between reads, so if we read a vale close to overflow, we + * wait for overflow to occur and read both registers when its safe. + */ + u32 systim_overflow_latch_fix = 0x3FFFFFFF; - /* latch SYSTIMH on read of SYSTIML */ - systim = (cycle_t)er32(SYSTIML); + do { + systim = (cycle_t)er32(SYSTIML); + } while (systim > systim_overflow_latch_fix); systim |= (cycle_t)er32(SYSTIMH) << 32; if ((hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82583)) { @@ -4196,9 +4333,9 @@ static int e1000_sw_init(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; + adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN; adapter->rx_ps_bsize0 = 128; - adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + adapter->max_frame_size = netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; adapter->tx_ring_count = E1000_DEFAULT_TXD; adapter->rx_ring_count = E1000_DEFAULT_RXD; @@ -5781,17 +5918,17 @@ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev_priv(netdev); - int max_frame = new_mtu + VLAN_HLEN + ETH_HLEN + ETH_FCS_LEN; + int max_frame = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; /* Jumbo frame support */ - if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) && + if ((max_frame > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) && !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { e_err("Jumbo Frames not supported.\n"); return -EINVAL; } /* Supported frame sizes */ - if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) || + if ((new_mtu < (VLAN_ETH_ZLEN + ETH_FCS_LEN)) || (max_frame > adapter->max_hw_frame_size)) { e_err("Unsupported MTU setting\n"); return -EINVAL; @@ -5831,10 +5968,8 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->rx_buffer_len = 4096; /* adjust allocation if LPE protects us, and we aren't using SBP */ - if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || - (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) - adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN - + ETH_FCS_LEN; + if (max_frame <= (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) + adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN; if (netif_running(netdev)) e1000e_up(adapter); @@ -6678,6 +6813,19 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter) } } +static netdev_features_t e1000_fix_features(struct net_device *netdev, + netdev_features_t features) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */ + if ((hw->mac.type >= e1000_pch2lan) && (netdev->mtu > ETH_DATA_LEN)) + features &= ~NETIF_F_RXFCS; + + return features; +} + static int e1000_set_features(struct net_device *netdev, netdev_features_t features) { @@ -6734,6 +6882,7 @@ static const struct net_device_ops e1000e_netdev_ops = { .ndo_poll_controller = e1000_netpoll, #endif .ndo_set_features = e1000_set_features, + .ndo_fix_features = e1000_fix_features, }; /** @@ -7289,7 +7438,7 @@ static int __init e1000_init_module(void) pr_info("Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_version); - pr_info("Copyright(c) 1999 - 2014 Intel Corporation.\n"); + pr_info("Copyright(c) 1999 - 2015 Intel Corporation.\n"); ret = pci_register_driver(&e1000_driver); return ret; |