diff options
Diffstat (limited to 'drivers/net/ethernet/amd/sun3lance.c')
| -rw-r--r-- | drivers/net/ethernet/amd/sun3lance.c | 961 |
1 files changed, 961 insertions, 0 deletions
diff --git a/drivers/net/ethernet/amd/sun3lance.c b/drivers/net/ethernet/amd/sun3lance.c new file mode 100644 index 000000000000..080b71fcc683 --- /dev/null +++ b/drivers/net/ethernet/amd/sun3lance.c @@ -0,0 +1,961 @@ +/* sun3lance.c: Ethernet driver for SUN3 Lance chip */ +/* + + Sun3 Lance ethernet driver, by Sam Creasey (sammy@users.qual.net). + This driver is a part of the linux kernel, and is thus distributed + under the GNU General Public License. + + The values used in LANCE_OBIO and LANCE_IRQ seem to be empirically + true for the correct IRQ and address of the lance registers. They + have not been widely tested, however. What we probably need is a + "proper" way to search for a device in the sun3's prom, but, alas, + linux has no such thing. + + This driver is largely based on atarilance.c, by Roman Hodek. Other + sources of inspiration were the NetBSD sun3 am7990 driver, and the + linux sparc lance driver (sunlance.c). + + There are more assumptions made throughout this driver, it almost + certainly still needs work, but it does work at least for RARP/BOOTP and + mounting the root NFS filesystem. + +*/ + +static char *version = "sun3lance.c: v1.2 1/12/2001 Sam Creasey (sammy@sammy.net)\n"; + +#include <linux/module.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/bitops.h> + +#include <asm/cacheflush.h> +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/dvma.h> +#include <asm/idprom.h> +#include <asm/machines.h> + +#ifdef CONFIG_SUN3 +#include <asm/sun3mmu.h> +#else +#include <asm/sun3xprom.h> +#endif + +/* sun3/60 addr/irq for the lance chip. If your sun is different, + change this. */ +#define LANCE_OBIO 0x120000 +#define LANCE_IRQ IRQ_AUTO_3 + +/* Debug level: + * 0 = silent, print only serious errors + * 1 = normal, print error messages + * 2 = debug, print debug infos + * 3 = debug, print even more debug infos (packet data) + */ + +#define LANCE_DEBUG 0 + +#ifdef LANCE_DEBUG +static int lance_debug = LANCE_DEBUG; +#else +static int lance_debug = 1; +#endif +module_param(lance_debug, int, 0); +MODULE_PARM_DESC(lance_debug, "SUN3 Lance debug level (0-3)"); +MODULE_LICENSE("GPL"); + +#define DPRINTK(n,a) \ + do { \ + if (lance_debug >= n) \ + printk a; \ + } while( 0 ) + + +/* we're only using 32k of memory, so we use 4 TX + buffers and 16 RX buffers. These values are expressed as log2. */ + +#define TX_LOG_RING_SIZE 3 +#define RX_LOG_RING_SIZE 5 + +/* These are the derived values */ + +#define TX_RING_SIZE (1 << TX_LOG_RING_SIZE) +#define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5) +#define TX_RING_MOD_MASK (TX_RING_SIZE - 1) + +#define RX_RING_SIZE (1 << RX_LOG_RING_SIZE) +#define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5) +#define RX_RING_MOD_MASK (RX_RING_SIZE - 1) + +/* Definitions for packet buffer access: */ +#define PKT_BUF_SZ 1544 + +/* Get the address of a packet buffer corresponding to a given buffer head */ +#define PKTBUF_ADDR(head) (void *)((unsigned long)(MEM) | (head)->base) + + +/* The LANCE Rx and Tx ring descriptors. */ +struct lance_rx_head { + unsigned short base; /* Low word of base addr */ + volatile unsigned char flag; + unsigned char base_hi; /* High word of base addr (unused) */ + short buf_length; /* This length is 2s complement! */ + volatile short msg_length; /* This length is "normal". */ +}; + +struct lance_tx_head { + unsigned short base; /* Low word of base addr */ + volatile unsigned char flag; + unsigned char base_hi; /* High word of base addr (unused) */ + short length; /* Length is 2s complement! */ + volatile short misc; +}; + +/* The LANCE initialization block, described in databook. */ +struct lance_init_block { + unsigned short mode; /* Pre-set mode */ + unsigned char hwaddr[6]; /* Physical ethernet address */ + unsigned int filter[2]; /* Multicast filter (unused). */ + /* Receive and transmit ring base, along with length bits. */ + unsigned short rdra; + unsigned short rlen; + unsigned short tdra; + unsigned short tlen; + unsigned short pad[4]; /* is thie needed? */ +}; + +/* The whole layout of the Lance shared memory */ +struct lance_memory { + struct lance_init_block init; + struct lance_tx_head tx_head[TX_RING_SIZE]; + struct lance_rx_head rx_head[RX_RING_SIZE]; + char rx_data[RX_RING_SIZE][PKT_BUF_SZ]; + char tx_data[TX_RING_SIZE][PKT_BUF_SZ]; +}; + +/* The driver's private device structure */ + +struct lance_private { + volatile unsigned short *iobase; + struct lance_memory *mem; + int new_rx, new_tx; /* The next free ring entry */ + int old_tx, old_rx; /* ring entry to be processed */ +/* These two must be longs for set_bit() */ + long tx_full; + long lock; +}; + +/* I/O register access macros */ + +#define MEM lp->mem +#define DREG lp->iobase[0] +#define AREG lp->iobase[1] +#define REGA(a) (*( AREG = (a), &DREG )) + +/* Definitions for the Lance */ + +/* tx_head flags */ +#define TMD1_ENP 0x01 /* end of packet */ +#define TMD1_STP 0x02 /* start of packet */ +#define TMD1_DEF 0x04 /* deferred */ +#define TMD1_ONE 0x08 /* one retry needed */ +#define TMD1_MORE 0x10 /* more than one retry needed */ +#define TMD1_ERR 0x40 /* error summary */ +#define TMD1_OWN 0x80 /* ownership (set: chip owns) */ + +#define TMD1_OWN_CHIP TMD1_OWN +#define TMD1_OWN_HOST 0 + +/* tx_head misc field */ +#define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */ +#define TMD3_RTRY 0x0400 /* failed after 16 retries */ +#define TMD3_LCAR 0x0800 /* carrier lost */ +#define TMD3_LCOL 0x1000 /* late collision */ +#define TMD3_UFLO 0x4000 /* underflow (late memory) */ +#define TMD3_BUFF 0x8000 /* buffering error (no ENP) */ + +/* rx_head flags */ +#define RMD1_ENP 0x01 /* end of packet */ +#define RMD1_STP 0x02 /* start of packet */ +#define RMD1_BUFF 0x04 /* buffer error */ +#define RMD1_CRC 0x08 /* CRC error */ +#define RMD1_OFLO 0x10 /* overflow */ +#define RMD1_FRAM 0x20 /* framing error */ +#define RMD1_ERR 0x40 /* error summary */ +#define RMD1_OWN 0x80 /* ownership (set: ship owns) */ + +#define RMD1_OWN_CHIP RMD1_OWN +#define RMD1_OWN_HOST 0 + +/* register names */ +#define CSR0 0 /* mode/status */ +#define CSR1 1 /* init block addr (low) */ +#define CSR2 2 /* init block addr (high) */ +#define CSR3 3 /* misc */ +#define CSR8 8 /* address filter */ +#define CSR15 15 /* promiscuous mode */ + +/* CSR0 */ +/* (R=readable, W=writeable, S=set on write, C=clear on write) */ +#define CSR0_INIT 0x0001 /* initialize (RS) */ +#define CSR0_STRT 0x0002 /* start (RS) */ +#define CSR0_STOP 0x0004 /* stop (RS) */ +#define CSR0_TDMD 0x0008 /* transmit demand (RS) */ +#define CSR0_TXON 0x0010 /* transmitter on (R) */ +#define CSR0_RXON 0x0020 /* receiver on (R) */ +#define CSR0_INEA 0x0040 /* interrupt enable (RW) */ +#define CSR0_INTR 0x0080 /* interrupt active (R) */ +#define CSR0_IDON 0x0100 /* initialization done (RC) */ +#define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */ +#define CSR0_RINT 0x0400 /* receiver interrupt (RC) */ +#define CSR0_MERR 0x0800 /* memory error (RC) */ +#define CSR0_MISS 0x1000 /* missed frame (RC) */ +#define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */ +#define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */ +#define CSR0_ERR 0x8000 /* error (RC) */ + +/* CSR3 */ +#define CSR3_BCON 0x0001 /* byte control */ +#define CSR3_ACON 0x0002 /* ALE control */ +#define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */ + +/***************************** Prototypes *****************************/ + +static int lance_probe( struct net_device *dev); +static int lance_open( struct net_device *dev ); +static void lance_init_ring( struct net_device *dev ); +static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev ); +static irqreturn_t lance_interrupt( int irq, void *dev_id); +static int lance_rx( struct net_device *dev ); +static int lance_close( struct net_device *dev ); +static void set_multicast_list( struct net_device *dev ); + +/************************* End of Prototypes **************************/ + +struct net_device * __init sun3lance_probe(int unit) +{ + struct net_device *dev; + static int found; + int err = -ENODEV; + + if (!MACH_IS_SUN3 && !MACH_IS_SUN3X) + return ERR_PTR(-ENODEV); + + /* check that this machine has an onboard lance */ + switch(idprom->id_machtype) { + case SM_SUN3|SM_3_50: + case SM_SUN3|SM_3_60: + case SM_SUN3X|SM_3_80: + /* these machines have lance */ + break; + + default: + return ERR_PTR(-ENODEV); + } + + if (found) + return ERR_PTR(-ENODEV); + + dev = alloc_etherdev(sizeof(struct lance_private)); + if (!dev) + return ERR_PTR(-ENOMEM); + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + } + + if (!lance_probe(dev)) + goto out; + + err = register_netdev(dev); + if (err) + goto out1; + found = 1; + return dev; + +out1: +#ifdef CONFIG_SUN3 + iounmap((void __iomem *)dev->base_addr); +#endif +out: + free_netdev(dev); + return ERR_PTR(err); +} + +static const struct net_device_ops lance_netdev_ops = { + .ndo_open = lance_open, + .ndo_stop = lance_close, + .ndo_start_xmit = lance_start_xmit, + .ndo_set_rx_mode = set_multicast_list, + .ndo_set_mac_address = NULL, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + +static int __init lance_probe( struct net_device *dev) +{ + unsigned long ioaddr; + + struct lance_private *lp; + int i; + static int did_version; + volatile unsigned short *ioaddr_probe; + unsigned short tmp1, tmp2; + +#ifdef CONFIG_SUN3 + ioaddr = (unsigned long)ioremap(LANCE_OBIO, PAGE_SIZE); + if (!ioaddr) + return 0; +#else + ioaddr = SUN3X_LANCE; +#endif + + /* test to see if there's really a lance here */ + /* (CSRO_INIT shouldn't be readable) */ + + ioaddr_probe = (volatile unsigned short *)ioaddr; + tmp1 = ioaddr_probe[0]; + tmp2 = ioaddr_probe[1]; + + ioaddr_probe[1] = CSR0; + ioaddr_probe[0] = CSR0_INIT | CSR0_STOP; + + if(ioaddr_probe[0] != CSR0_STOP) { + ioaddr_probe[0] = tmp1; + ioaddr_probe[1] = tmp2; + +#ifdef CONFIG_SUN3 + iounmap((void __iomem *)ioaddr); +#endif + return 0; + } + + lp = netdev_priv(dev); + + /* XXX - leak? */ + MEM = dvma_malloc_align(sizeof(struct lance_memory), 0x10000); + if (MEM == NULL) { +#ifdef CONFIG_SUN3 + iounmap((void __iomem *)ioaddr); +#endif + printk(KERN_WARNING "SUN3 Lance couldn't allocate DVMA memory\n"); + return 0; + } + + lp->iobase = (volatile unsigned short *)ioaddr; + dev->base_addr = (unsigned long)ioaddr; /* informational only */ + + REGA(CSR0) = CSR0_STOP; + + if (request_irq(LANCE_IRQ, lance_interrupt, IRQF_DISABLED, "SUN3 Lance", dev) < 0) { +#ifdef CONFIG_SUN3 + iounmap((void __iomem *)ioaddr); +#endif + dvma_free((void *)MEM); + printk(KERN_WARNING "SUN3 Lance unable to allocate IRQ\n"); + return 0; + } + dev->irq = (unsigned short)LANCE_IRQ; + + + printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ", + dev->name, + (unsigned long)ioaddr, + (unsigned long)MEM, + dev->irq); + + /* copy in the ethernet address from the prom */ + for(i = 0; i < 6 ; i++) + dev->dev_addr[i] = idprom->id_ethaddr[i]; + + /* tell the card it's ether address, bytes swapped */ + MEM->init.hwaddr[0] = dev->dev_addr[1]; + MEM->init.hwaddr[1] = dev->dev_addr[0]; + MEM->init.hwaddr[2] = dev->dev_addr[3]; + MEM->init.hwaddr[3] = dev->dev_addr[2]; + MEM->init.hwaddr[4] = dev->dev_addr[5]; + MEM->init.hwaddr[5] = dev->dev_addr[4]; + + printk("%pM\n", dev->dev_addr); + + MEM->init.mode = 0x0000; + MEM->init.filter[0] = 0x00000000; + MEM->init.filter[1] = 0x00000000; + MEM->init.rdra = dvma_vtob(MEM->rx_head); + MEM->init.rlen = (RX_LOG_RING_SIZE << 13) | + (dvma_vtob(MEM->rx_head) >> 16); + MEM->init.tdra = dvma_vtob(MEM->tx_head); + MEM->init.tlen = (TX_LOG_RING_SIZE << 13) | + (dvma_vtob(MEM->tx_head) >> 16); + + DPRINTK(2, ("initaddr: %08lx rx_ring: %08lx tx_ring: %08lx\n", + dvma_vtob(&(MEM->init)), dvma_vtob(MEM->rx_head), + (dvma_vtob(MEM->tx_head)))); + + if (did_version++ == 0) + printk( version ); + + dev->netdev_ops = &lance_netdev_ops; +// KLUDGE -- REMOVE ME + set_bit(__LINK_STATE_PRESENT, &dev->state); + + + return 1; +} + +static int lance_open( struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + int i; + + DPRINTK( 2, ( "%s: lance_open()\n", dev->name )); + + REGA(CSR0) = CSR0_STOP; + + lance_init_ring(dev); + + /* From now on, AREG is kept to point to CSR0 */ + REGA(CSR0) = CSR0_INIT; + + i = 1000000; + while (--i > 0) + if (DREG & CSR0_IDON) + break; + if (i <= 0 || (DREG & CSR0_ERR)) { + DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n", + dev->name, i, DREG )); + DREG = CSR0_STOP; + return -EIO; + } + + DREG = CSR0_IDON | CSR0_STRT | CSR0_INEA; + + netif_start_queue(dev); + + DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG )); + + return 0; +} + + +/* Initialize the LANCE Rx and Tx rings. */ + +static void lance_init_ring( struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + int i; + + lp->lock = 0; + lp->tx_full = 0; + lp->new_rx = lp->new_tx = 0; + lp->old_rx = lp->old_tx = 0; + + for( i = 0; i < TX_RING_SIZE; i++ ) { + MEM->tx_head[i].base = dvma_vtob(MEM->tx_data[i]); + MEM->tx_head[i].flag = 0; + MEM->tx_head[i].base_hi = + (dvma_vtob(MEM->tx_data[i])) >>16; + MEM->tx_head[i].length = 0; + MEM->tx_head[i].misc = 0; + } + + for( i = 0; i < RX_RING_SIZE; i++ ) { + MEM->rx_head[i].base = dvma_vtob(MEM->rx_data[i]); + MEM->rx_head[i].flag = RMD1_OWN_CHIP; + MEM->rx_head[i].base_hi = + (dvma_vtob(MEM->rx_data[i])) >> 16; + MEM->rx_head[i].buf_length = -PKT_BUF_SZ | 0xf000; + MEM->rx_head[i].msg_length = 0; + } + + /* tell the card it's ether address, bytes swapped */ + MEM->init.hwaddr[0] = dev->dev_addr[1]; + MEM->init.hwaddr[1] = dev->dev_addr[0]; + MEM->init.hwaddr[2] = dev->dev_addr[3]; + MEM->init.hwaddr[3] = dev->dev_addr[2]; + MEM->init.hwaddr[4] = dev->dev_addr[5]; + MEM->init.hwaddr[5] = dev->dev_addr[4]; + + MEM->init.mode = 0x0000; + MEM->init.filter[0] = 0x00000000; + MEM->init.filter[1] = 0x00000000; + MEM->init.rdra = dvma_vtob(MEM->rx_head); + MEM->init.rlen = (RX_LOG_RING_SIZE << 13) | + (dvma_vtob(MEM->rx_head) >> 16); + MEM->init.tdra = dvma_vtob(MEM->tx_head); + MEM->init.tlen = (TX_LOG_RING_SIZE << 13) | + (dvma_vtob(MEM->tx_head) >> 16); + + + /* tell the lance the address of its init block */ + REGA(CSR1) = dvma_vtob(&(MEM->init)); + REGA(CSR2) = dvma_vtob(&(MEM->init)) >> 16; + +#ifdef CONFIG_SUN3X + REGA(CSR3) = CSR3_BSWP | CSR3_ACON | CSR3_BCON; +#else + REGA(CSR3) = CSR3_BSWP; +#endif + +} + + +static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + int entry, len; + struct lance_tx_head *head; + unsigned long flags; + + DPRINTK( 1, ( "%s: transmit start.\n", + dev->name)); + + /* Transmitter timeout, serious problems. */ + if (netif_queue_stopped(dev)) { + int tickssofar = jiffies - dev_trans_start(dev); + if (tickssofar < HZ/5) + return NETDEV_TX_BUSY; + + DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n", + dev->name, DREG )); + DREG = CSR0_STOP; + /* + * Always set BSWP after a STOP as STOP puts it back into + * little endian mode. + */ + REGA(CSR3) = CSR3_BSWP; + dev->stats.tx_errors++; + + if(lance_debug >= 2) { + int i; + printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n", + lp->old_tx, lp->new_tx, + lp->tx_full ? " (full)" : "", + lp->new_rx ); + for( i = 0 ; i < RX_RING_SIZE; i++ ) + printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n", + i, MEM->rx_head[i].base, + -MEM->rx_head[i].buf_length, + MEM->rx_head[i].msg_length); + for( i = 0 ; i < TX_RING_SIZE; i++ ) + printk("tx #%d: base=%04x len=%04x misc=%04x\n", + i, MEM->tx_head[i].base, + -MEM->tx_head[i].length, + MEM->tx_head[i].misc ); + } + + lance_init_ring(dev); + REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT; + + netif_start_queue(dev); + + return NETDEV_TX_OK; + } + + + /* Block a timer-based transmit from overlapping. This could better be + done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */ + + /* Block a timer-based transmit from overlapping with us by + stopping the queue for a bit... */ + + netif_stop_queue(dev); + + if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) { + printk( "%s: tx queue lock!.\n", dev->name); + /* don't clear dev->tbusy flag. */ + return NETDEV_TX_BUSY; + } + + AREG = CSR0; + DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n", + dev->name, DREG )); + +#ifdef CONFIG_SUN3X + /* this weirdness doesn't appear on sun3... */ + if(!(DREG & CSR0_INIT)) { + DPRINTK( 1, ("INIT not set, reinitializing...\n")); + REGA( CSR0 ) = CSR0_STOP; + lance_init_ring(dev); + REGA( CSR0 ) = CSR0_INIT | CSR0_STRT; + } +#endif + + /* Fill in a Tx ring entry */ +#if 0 + if (lance_debug >= 2) { + printk( "%s: TX pkt %d type 0x%04x" + " from %s to %s" + " data at 0x%08x len %d\n", + dev->name, lp->new_tx, ((u_short *)skb->data)[6], + DEV_ADDR(&skb->data[6]), DEV_ADDR(skb->data), + (int)skb->data, (int)skb->len ); + } +#endif + /* We're not prepared for the int until the last flags are set/reset. + * And the int may happen already after setting the OWN_CHIP... */ + local_irq_save(flags); + + /* Mask to ring buffer boundary. */ + entry = lp->new_tx; + head = &(MEM->tx_head[entry]); + + /* Caution: the write order is important here, set the "ownership" bits + * last. + */ + + /* the sun3's lance needs it's buffer padded to the minimum + size */ + len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN; + +// head->length = -len; + head->length = (-len) | 0xf000; + head->misc = 0; + + skb_copy_from_linear_data(skb, PKTBUF_ADDR(head), skb->len); + if (len != skb->len) + memset(PKTBUF_ADDR(head) + skb->len, 0, len-skb->len); + + head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP; + lp->new_tx = (lp->new_tx + 1) & TX_RING_MOD_MASK; + dev->stats.tx_bytes += skb->len; + + /* Trigger an immediate send poll. */ + REGA(CSR0) = CSR0_INEA | CSR0_TDMD | CSR0_STRT; + AREG = CSR0; + DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n", + dev->name, DREG )); + dev_kfree_skb(skb); + + lp->lock = 0; + if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) == + TMD1_OWN_HOST) + netif_start_queue(dev); + + local_irq_restore(flags); + + return NETDEV_TX_OK; +} + +/* The LANCE interrupt handler. */ + +static irqreturn_t lance_interrupt( int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct lance_private *lp = netdev_priv(dev); + int csr0; + static int in_interrupt; + + if (dev == NULL) { + DPRINTK( 1, ( "lance_interrupt(): invalid dev_id\n" )); + return IRQ_NONE; + } + + if (in_interrupt) + DPRINTK( 2, ( "%s: Re-entering the interrupt handler.\n", dev->name )); + in_interrupt = 1; + + still_more: + flush_cache_all(); + + AREG = CSR0; + csr0 = DREG; + + /* ack interrupts */ + DREG = csr0 & (CSR0_TINT | CSR0_RINT | CSR0_IDON); + + /* clear errors */ + if(csr0 & CSR0_ERR) + DREG = CSR0_BABL | CSR0_MERR | CSR0_CERR | CSR0_MISS; + + + DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n", + dev->name, csr0, DREG )); + + if (csr0 & CSR0_TINT) { /* Tx-done interrupt */ + int old_tx = lp->old_tx; + +// if(lance_debug >= 3) { +// int i; +// +// printk("%s: tx int\n", dev->name); +// +// for(i = 0; i < TX_RING_SIZE; i++) +// printk("ring %d flag=%04x\n", i, +// MEM->tx_head[i].flag); +// } + + while( old_tx != lp->new_tx) { + struct lance_tx_head *head = &(MEM->tx_head[old_tx]); + + DPRINTK(3, ("on tx_ring %d\n", old_tx)); + + if (head->flag & TMD1_OWN_CHIP) + break; /* It still hasn't been Txed */ + + if (head->flag & TMD1_ERR) { + int status = head->misc; + dev->stats.tx_errors++; + if (status & TMD3_RTRY) dev->stats.tx_aborted_errors++; + if (status & TMD3_LCAR) dev->stats.tx_carrier_errors++; + if (status & TMD3_LCOL) dev->stats.tx_window_errors++; + if (status & (TMD3_UFLO | TMD3_BUFF)) { + dev->stats.tx_fifo_errors++; + printk("%s: Tx FIFO error\n", + dev->name); + REGA(CSR0) = CSR0_STOP; + REGA(CSR3) = CSR3_BSWP; + lance_init_ring(dev); + REGA(CSR0) = CSR0_STRT | CSR0_INEA; + return IRQ_HANDLED; + } + } else if(head->flag & (TMD1_ENP | TMD1_STP)) { + + head->flag &= ~(TMD1_ENP | TMD1_STP); + if(head->flag & (TMD1_ONE | TMD1_MORE)) + dev->stats.collisions++; + + dev->stats.tx_packets++; + DPRINTK(3, ("cleared tx ring %d\n", old_tx)); + } + old_tx = (old_tx +1) & TX_RING_MOD_MASK; + } + + lp->old_tx = old_tx; + } + + + if (netif_queue_stopped(dev)) { + /* The ring is no longer full, clear tbusy. */ + netif_start_queue(dev); + netif_wake_queue(dev); + } + + if (csr0 & CSR0_RINT) /* Rx interrupt */ + lance_rx( dev ); + + /* Log misc errors. */ + if (csr0 & CSR0_BABL) dev->stats.tx_errors++; /* Tx babble. */ + if (csr0 & CSR0_MISS) dev->stats.rx_errors++; /* Missed a Rx frame. */ + if (csr0 & CSR0_MERR) { + DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), " + "status %04x.\n", dev->name, csr0 )); + /* Restart the chip. */ + REGA(CSR0) = CSR0_STOP; + REGA(CSR3) = CSR3_BSWP; + lance_init_ring(dev); + REGA(CSR0) = CSR0_STRT | CSR0_INEA; + } + + + /* Clear any other interrupt, and set interrupt enable. */ +// DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR | +// CSR0_IDON | CSR0_INEA; + + REGA(CSR0) = CSR0_INEA; + + if(DREG & (CSR0_RINT | CSR0_TINT)) { + DPRINTK(2, ("restarting interrupt, csr0=%#04x\n", DREG)); + goto still_more; + } + + DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n", + dev->name, DREG )); + in_interrupt = 0; + return IRQ_HANDLED; +} + +/* get packet, toss into skbuff */ +static int lance_rx( struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + int entry = lp->new_rx; + + /* If we own the next entry, it's a new packet. Send it up. */ + while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) { + struct lance_rx_head *head = &(MEM->rx_head[entry]); + int status = head->flag; + + if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */ + /* There is a tricky error noted by John Murphy, + <murf@perftech.com> to Russ Nelson: Even with + full-sized buffers it's possible for a jabber packet to use two + buffers, with only the last correctly noting the error. */ + if (status & RMD1_ENP) /* Only count a general error at the */ + dev->stats.rx_errors++; /* end of a packet.*/ + if (status & RMD1_FRAM) dev->stats.rx_frame_errors++; + if (status & RMD1_OFLO) dev->stats.rx_over_errors++; + if (status & RMD1_CRC) dev->stats.rx_crc_errors++; + if (status & RMD1_BUFF) dev->stats.rx_fifo_errors++; + head->flag &= (RMD1_ENP|RMD1_STP); + } else { + /* Malloc up new buffer, compatible with net-3. */ +// short pkt_len = head->msg_length;// & 0xfff; + short pkt_len = (head->msg_length & 0xfff) - 4; + struct sk_buff *skb; + + if (pkt_len < 60) { + printk( "%s: Runt packet!\n", dev->name ); + dev->stats.rx_errors++; + } + else { + skb = dev_alloc_skb( pkt_len+2 ); + if (skb == NULL) { + DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n", + dev->name )); + + dev->stats.rx_dropped++; + head->msg_length = 0; + head->flag |= RMD1_OWN_CHIP; + lp->new_rx = (lp->new_rx+1) & + RX_RING_MOD_MASK; + } + +#if 0 + if (lance_debug >= 3) { + u_char *data = PKTBUF_ADDR(head); + printk("%s: RX pkt %d type 0x%04x" + " from %pM to %pM", + dev->name, lp->new_tx, ((u_short *)data)[6], + &data[6], data); + + printk(" data %02x %02x %02x %02x %02x %02x %02x %02x " + "len %d at %08x\n", + data[15], data[16], data[17], data[18], + data[19], data[20], data[21], data[22], + pkt_len, data); + } +#endif + if (lance_debug >= 3) { + u_char *data = PKTBUF_ADDR(head); + printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len); + } + + + skb_reserve( skb, 2 ); /* 16 byte align */ + skb_put( skb, pkt_len ); /* Make room */ + skb_copy_to_linear_data(skb, + PKTBUF_ADDR(head), + pkt_len); + + skb->protocol = eth_type_trans( skb, dev ); + netif_rx( skb ); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } + } + +// head->buf_length = -PKT_BUF_SZ | 0xf000; + head->msg_length = 0; + head->flag = RMD1_OWN_CHIP; + + entry = lp->new_rx = (lp->new_rx +1) & RX_RING_MOD_MASK; + } + + /* From lance.c (Donald Becker): */ + /* We should check that at least two ring entries are free. + If not, we should free one and mark stats->rx_dropped++. */ + + return 0; +} + + +static int lance_close( struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + + netif_stop_queue(dev); + + AREG = CSR0; + + DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n", + dev->name, DREG )); + + /* We stop the LANCE here -- it occasionally polls + memory if we don't. */ + DREG = CSR0_STOP; + return 0; +} + + +/* Set or clear the multicast filter for this adaptor. + num_addrs == -1 Promiscuous mode, receive all packets + num_addrs == 0 Normal mode, clear multicast list + num_addrs > 0 Multicast mode, receive normal and MC packets, and do + best-effort filtering. + */ + +/* completely untested on a sun3 */ +static void set_multicast_list( struct net_device *dev ) +{ + struct lance_private *lp = netdev_priv(dev); + + if(netif_queue_stopped(dev)) + /* Only possible if board is already started */ + return; + + /* We take the simple way out and always enable promiscuous mode. */ + DREG = CSR0_STOP; /* Temporarily stop the lance. */ + + if (dev->flags & IFF_PROMISC) { + /* Log any net taps. */ + DPRINTK( 3, ( "%s: Promiscuous mode enabled.\n", dev->name )); + REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */ + } else { + short multicast_table[4]; + int num_addrs = netdev_mc_count(dev); + int i; + /* We don't use the multicast table, but rely on upper-layer + * filtering. */ + memset( multicast_table, (num_addrs == 0) ? 0 : -1, + sizeof(multicast_table) ); + for( i = 0; i < 4; i++ ) + REGA( CSR8+i ) = multicast_table[i]; + REGA( CSR15 ) = 0; /* Unset promiscuous mode */ + } + + /* + * Always set BSWP after a STOP as STOP puts it back into + * little endian mode. + */ + REGA( CSR3 ) = CSR3_BSWP; + + /* Resume normal operation and reset AREG to CSR0 */ + REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT; +} + + +#ifdef MODULE + +static struct net_device *sun3lance_dev; + +int __init init_module(void) +{ + sun3lance_dev = sun3lance_probe(-1); + if (IS_ERR(sun3lance_dev)) + return PTR_ERR(sun3lance_dev); + return 0; +} + +void __exit cleanup_module(void) +{ + unregister_netdev(sun3lance_dev); +#ifdef CONFIG_SUN3 + iounmap((void __iomem *)sun3lance_dev->base_addr); +#endif + free_netdev(sun3lance_dev); +} + +#endif /* MODULE */ + |