diff options
Diffstat (limited to 'drivers/net/ethernet/3com/3c574_cs.c')
-rw-r--r-- | drivers/net/ethernet/3com/3c574_cs.c | 1181 |
1 files changed, 1181 insertions, 0 deletions
diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c new file mode 100644 index 000000000000..9c01bc9235b3 --- /dev/null +++ b/drivers/net/ethernet/3com/3c574_cs.c @@ -0,0 +1,1181 @@ +/* 3c574.c: A PCMCIA ethernet driver for the 3com 3c574 "RoadRunner". + + Written 1993-1998 by + Donald Becker, becker@scyld.com, (driver core) and + David Hinds, dahinds@users.sourceforge.net (from his PC card code). + Locking fixes (C) Copyright 2003 Red Hat Inc + + This software may be used and distributed according to the terms of + the GNU General Public License, incorporated herein by reference. + + This driver derives from Donald Becker's 3c509 core, which has the + following copyright: + Copyright 1993 United States Government as represented by the + Director, National Security Agency. + + +*/ + +/* + Theory of Operation + +I. Board Compatibility + +This device driver is designed for the 3Com 3c574 PC card Fast Ethernet +Adapter. + +II. Board-specific settings + +None -- PC cards are autoconfigured. + +III. Driver operation + +The 3c574 uses a Boomerang-style interface, without the bus-master capability. +See the Boomerang driver and documentation for most details. + +IV. Notes and chip documentation. + +Two added registers are used to enhance PIO performance, RunnerRdCtrl and +RunnerWrCtrl. These are 11 bit down-counters that are preloaded with the +count of word (16 bits) reads or writes the driver is about to do to the Rx +or Tx FIFO. The chip is then able to hide the internal-PCI-bus to PC-card +translation latency by buffering the I/O operations with an 8 word FIFO. +Note: No other chip accesses are permitted when this buffer is used. + +A second enhancement is that both attribute and common memory space +0x0800-0x0fff can translated to the PIO FIFO. Thus memory operations (faster +with *some* PCcard bridges) may be used instead of I/O operations. +This is enabled by setting the 0x10 bit in the PCMCIA LAN COR. + +Some slow PC card bridges work better if they never see a WAIT signal. +This is configured by setting the 0x20 bit in the PCMCIA LAN COR. +Only do this after testing that it is reliable and improves performance. + +The upper five bits of RunnerRdCtrl are used to window into PCcard +configuration space registers. Window 0 is the regular Boomerang/Odie +register set, 1-5 are various PC card control registers, and 16-31 are +the (reversed!) CIS table. + +A final note: writing the InternalConfig register in window 3 with an +invalid ramWidth is Very Bad. + +V. References + +http://www.scyld.com/expert/NWay.html +http://www.national.com/opf/DP/DP83840A.html + +Thanks to Terry Murphy of 3Com for providing development information for +earlier 3Com products. + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/bitops.h> +#include <linux/mii.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ciscode.h> +#include <pcmcia/ds.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> + +/*====================================================================*/ + +/* Module parameters */ + +MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); +MODULE_DESCRIPTION("3Com 3c574 series PCMCIA ethernet driver"); +MODULE_LICENSE("GPL"); + +#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) + +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +INT_MODULE_PARM(max_interrupt_work, 32); + +/* Force full duplex modes? */ +INT_MODULE_PARM(full_duplex, 0); + +/* Autodetect link polarity reversal? */ +INT_MODULE_PARM(auto_polarity, 1); + + +/*====================================================================*/ + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT ((800*HZ)/1000) + +/* To minimize the size of the driver source and make the driver more + readable not all constants are symbolically defined. + You'll need the manual if you want to understand driver details anyway. */ +/* Offsets from base I/O address. */ +#define EL3_DATA 0x00 +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e + +#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD) + +/* The top five bits written to EL3_CMD are a command, the lower + 11 bits are the parameter, if applicable. */ +enum el3_cmds { + TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11, + RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11, + TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11, + FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11, + SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11, + SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11, + StatsDisable = 22<<11, StopCoax = 23<<11, +}; + +enum elxl_status { + IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004, + TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, + IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000 }; + +/* The SetRxFilter command accepts the following classes: */ +enum RxFilter { + RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 +}; + +enum Window0 { + Wn0EepromCmd = 10, Wn0EepromData = 12, /* EEPROM command/address, data. */ + IntrStatus=0x0E, /* Valid in all windows. */ +}; +/* These assumes the larger EEPROM. */ +enum Win0_EEPROM_cmds { + EEPROM_Read = 0x200, EEPROM_WRITE = 0x100, EEPROM_ERASE = 0x300, + EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */ + EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */ +}; + +/* Register window 1 offsets, the window used in normal operation. + On the "Odie" this window is always mapped at offsets 0x10-0x1f. + Except for TxFree, which is overlapped by RunnerWrCtrl. */ +enum Window1 { + TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14, + RxStatus = 0x18, Timer=0x1A, TxStatus = 0x1B, + TxFree = 0x0C, /* Remaining free bytes in Tx buffer. */ + RunnerRdCtrl = 0x16, RunnerWrCtrl = 0x1c, +}; + +enum Window3 { /* Window 3: MAC/config bits. */ + Wn3_Config=0, Wn3_MAC_Ctrl=6, Wn3_Options=8, +}; +enum wn3_config { + Ram_size = 7, + Ram_width = 8, + Ram_speed = 0x30, + Rom_size = 0xc0, + Ram_split_shift = 16, + Ram_split = 3 << Ram_split_shift, + Xcvr_shift = 20, + Xcvr = 7 << Xcvr_shift, + Autoselect = 0x1000000, +}; + +enum Window4 { /* Window 4: Xcvr/media bits. */ + Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10, +}; + +#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ + +struct el3_private { + struct pcmcia_device *p_dev; + u16 advertising, partner; /* NWay media advertisement */ + unsigned char phys; /* MII device address */ + unsigned int autoselect:1, default_media:3; /* Read from the EEPROM/Wn3_Config. */ + /* for transceiver monitoring */ + struct timer_list media; + unsigned short media_status; + unsigned short fast_poll; + unsigned long last_irq; + spinlock_t window_lock; /* Guards the Window selection */ +}; + +/* Set iff a MII transceiver on any interface requires mdio preamble. + This only set with the original DP83840 on older 3c905 boards, so the extra + code size of a per-interface flag is not worthwhile. */ +static char mii_preamble_required = 0; + +/* Index of functions. */ + +static int tc574_config(struct pcmcia_device *link); +static void tc574_release(struct pcmcia_device *link); + +static void mdio_sync(unsigned int ioaddr, int bits); +static int mdio_read(unsigned int ioaddr, int phy_id, int location); +static void mdio_write(unsigned int ioaddr, int phy_id, int location, + int value); +static unsigned short read_eeprom(unsigned int ioaddr, int index); +static void tc574_wait_for_completion(struct net_device *dev, int cmd); + +static void tc574_reset(struct net_device *dev); +static void media_check(unsigned long arg); +static int el3_open(struct net_device *dev); +static netdev_tx_t el3_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static irqreturn_t el3_interrupt(int irq, void *dev_id); +static void update_stats(struct net_device *dev); +static struct net_device_stats *el3_get_stats(struct net_device *dev); +static int el3_rx(struct net_device *dev, int worklimit); +static int el3_close(struct net_device *dev); +static void el3_tx_timeout(struct net_device *dev); +static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static void set_rx_mode(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); + +static void tc574_detach(struct pcmcia_device *p_dev); + +/* + tc574_attach() creates an "instance" of the driver, allocating + local data structures for one device. The device is registered + with Card Services. +*/ +static const struct net_device_ops el3_netdev_ops = { + .ndo_open = el3_open, + .ndo_stop = el3_close, + .ndo_start_xmit = el3_start_xmit, + .ndo_tx_timeout = el3_tx_timeout, + .ndo_get_stats = el3_get_stats, + .ndo_do_ioctl = el3_ioctl, + .ndo_set_rx_mode = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int tc574_probe(struct pcmcia_device *link) +{ + struct el3_private *lp; + struct net_device *dev; + + dev_dbg(&link->dev, "3c574_attach()\n"); + + /* Create the PC card device object. */ + dev = alloc_etherdev(sizeof(struct el3_private)); + if (!dev) + return -ENOMEM; + lp = netdev_priv(dev); + link->priv = dev; + lp->p_dev = link; + + spin_lock_init(&lp->window_lock); + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; + + dev->netdev_ops = &el3_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + return tc574_config(link); +} + +static void tc574_detach(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + dev_dbg(&link->dev, "3c574_detach()\n"); + + unregister_netdev(dev); + + tc574_release(link); + + free_netdev(dev); +} /* tc574_detach */ + +static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; + +static int tc574_config(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + struct el3_private *lp = netdev_priv(dev); + int ret, i, j; + unsigned int ioaddr; + __be16 *phys_addr; + char *cardname; + __u32 config; + u8 *buf; + size_t len; + + phys_addr = (__be16 *)dev->dev_addr; + + dev_dbg(&link->dev, "3c574_config()\n"); + + link->io_lines = 16; + + for (i = j = 0; j < 0x400; j += 0x20) { + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); + if (i == 0) + break; + } + if (i != 0) + goto failed; + + ret = pcmcia_request_irq(link, el3_interrupt); + if (ret) + goto failed; + + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + dev->irq = link->irq; + dev->base_addr = link->resource[0]->start; + + ioaddr = dev->base_addr; + + /* The 3c574 normally uses an EEPROM for configuration info, including + the hardware address. The future products may include a modem chip + and put the address in the CIS. */ + + len = pcmcia_get_tuple(link, 0x88, &buf); + if (buf && len >= 6) { + for (i = 0; i < 3; i++) + phys_addr[i] = htons(le16_to_cpu(buf[i * 2])); + kfree(buf); + } else { + kfree(buf); /* 0 < len < 6 */ + EL3WINDOW(0); + for (i = 0; i < 3; i++) + phys_addr[i] = htons(read_eeprom(ioaddr, i + 10)); + if (phys_addr[0] == htons(0x6060)) { + pr_notice("IO port conflict at 0x%03lx-0x%03lx\n", + dev->base_addr, dev->base_addr+15); + goto failed; + } + } + if (link->prod_id[1]) + cardname = link->prod_id[1]; + else + cardname = "3Com 3c574"; + + { + u_char mcr; + outw(2<<11, ioaddr + RunnerRdCtrl); + mcr = inb(ioaddr + 2); + outw(0<<11, ioaddr + RunnerRdCtrl); + pr_info(" ASIC rev %d,", mcr>>3); + EL3WINDOW(3); + config = inl(ioaddr + Wn3_Config); + lp->default_media = (config & Xcvr) >> Xcvr_shift; + lp->autoselect = config & Autoselect ? 1 : 0; + } + + init_timer(&lp->media); + + { + int phy; + + /* Roadrunner only: Turn on the MII transceiver */ + outw(0x8040, ioaddr + Wn3_Options); + mdelay(1); + outw(0xc040, ioaddr + Wn3_Options); + tc574_wait_for_completion(dev, TxReset); + tc574_wait_for_completion(dev, RxReset); + mdelay(1); + outw(0x8040, ioaddr + Wn3_Options); + + EL3WINDOW(4); + for (phy = 1; phy <= 32; phy++) { + int mii_status; + mdio_sync(ioaddr, 32); + mii_status = mdio_read(ioaddr, phy & 0x1f, 1); + if (mii_status != 0xffff) { + lp->phys = phy & 0x1f; + dev_dbg(&link->dev, " MII transceiver at " + "index %d, status %x.\n", + phy, mii_status); + if ((mii_status & 0x0040) == 0) + mii_preamble_required = 1; + break; + } + } + if (phy > 32) { + pr_notice(" No MII transceivers found!\n"); + goto failed; + } + i = mdio_read(ioaddr, lp->phys, 16) | 0x40; + mdio_write(ioaddr, lp->phys, 16, i); + lp->advertising = mdio_read(ioaddr, lp->phys, 4); + if (full_duplex) { + /* Only advertise the FD media types. */ + lp->advertising &= ~0x02a0; + mdio_write(ioaddr, lp->phys, 4, lp->advertising); + } + } + + SET_NETDEV_DEV(dev, &link->dev); + + if (register_netdev(dev) != 0) { + pr_notice("register_netdev() failed\n"); + goto failed; + } + + netdev_info(dev, "%s at io %#3lx, irq %d, hw_addr %pM\n", + cardname, dev->base_addr, dev->irq, dev->dev_addr); + netdev_info(dev, " %dK FIFO split %s Rx:Tx, %sMII interface.\n", + 8 << config & Ram_size, + ram_split[(config & Ram_split) >> Ram_split_shift], + config & Autoselect ? "autoselect " : ""); + + return 0; + +failed: + tc574_release(link); + return -ENODEV; + +} /* tc574_config */ + +static void tc574_release(struct pcmcia_device *link) +{ + pcmcia_disable_device(link); +} + +static int tc574_suspend(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) + netif_device_detach(dev); + + return 0; +} + +static int tc574_resume(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) { + tc574_reset(dev); + netif_device_attach(dev); + } + + return 0; +} + +static void dump_status(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + EL3WINDOW(1); + netdev_info(dev, " irq status %04x, rx status %04x, tx status %02x, tx free %04x\n", + inw(ioaddr+EL3_STATUS), + inw(ioaddr+RxStatus), inb(ioaddr+TxStatus), + inw(ioaddr+TxFree)); + EL3WINDOW(4); + netdev_info(dev, " diagnostics: fifo %04x net %04x ethernet %04x media %04x\n", + inw(ioaddr+0x04), inw(ioaddr+0x06), + inw(ioaddr+0x08), inw(ioaddr+0x0a)); + EL3WINDOW(1); +} + +/* + Use this for commands that may take time to finish +*/ +static void tc574_wait_for_completion(struct net_device *dev, int cmd) +{ + int i = 1500; + outw(cmd, dev->base_addr + EL3_CMD); + while (--i > 0) + if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break; + if (i == 0) + netdev_notice(dev, "command 0x%04x did not complete!\n", cmd); +} + +/* Read a word from the EEPROM using the regular EEPROM access register. + Assume that we are in register window zero. + */ +static unsigned short read_eeprom(unsigned int ioaddr, int index) +{ + int timer; + outw(EEPROM_Read + index, ioaddr + Wn0EepromCmd); + /* Pause for at least 162 usec for the read to take place. */ + for (timer = 1620; timer >= 0; timer--) { + if ((inw(ioaddr + Wn0EepromCmd) & 0x8000) == 0) + break; + } + return inw(ioaddr + Wn0EepromData); +} + +/* MII transceiver control section. + Read and write the MII registers using software-generated serial + MDIO protocol. See the MII specifications or DP83840A data sheet + for details. + The maxium data clock rate is 2.5 Mhz. The timing is easily met by the + slow PC card interface. */ + +#define MDIO_SHIFT_CLK 0x01 +#define MDIO_DIR_WRITE 0x04 +#define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE) +#define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE) +#define MDIO_DATA_READ 0x02 +#define MDIO_ENB_IN 0x00 + +/* Generate the preamble required for initial synchronization and + a few older transceivers. */ +static void mdio_sync(unsigned int ioaddr, int bits) +{ + unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt; + + /* Establish sync by sending at least 32 logic ones. */ + while (-- bits >= 0) { + outw(MDIO_DATA_WRITE1, mdio_addr); + outw(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr); + } +} + +static int mdio_read(unsigned int ioaddr, int phy_id, int location) +{ + int i; + int read_cmd = (0xf6 << 10) | (phy_id << 5) | location; + unsigned int retval = 0; + unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt; + + if (mii_preamble_required) + mdio_sync(ioaddr, 32); + + /* Shift the read command bits out. */ + for (i = 14; i >= 0; i--) { + int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; + outw(dataval, mdio_addr); + outw(dataval | MDIO_SHIFT_CLK, mdio_addr); + } + /* Read the two transition, 16 data, and wire-idle bits. */ + for (i = 19; i > 0; i--) { + outw(MDIO_ENB_IN, mdio_addr); + retval = (retval << 1) | ((inw(mdio_addr) & MDIO_DATA_READ) ? 1 : 0); + outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); + } + return (retval>>1) & 0xffff; +} + +static void mdio_write(unsigned int ioaddr, int phy_id, int location, int value) +{ + int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value; + unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt; + int i; + + if (mii_preamble_required) + mdio_sync(ioaddr, 32); + + /* Shift the command bits out. */ + for (i = 31; i >= 0; i--) { + int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; + outw(dataval, mdio_addr); + outw(dataval | MDIO_SHIFT_CLK, mdio_addr); + } + /* Leave the interface idle. */ + for (i = 1; i >= 0; i--) { + outw(MDIO_ENB_IN, mdio_addr); + outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr); + } +} + +/* Reset and restore all of the 3c574 registers. */ +static void tc574_reset(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + int i; + unsigned int ioaddr = dev->base_addr; + unsigned long flags; + + tc574_wait_for_completion(dev, TotalReset|0x10); + + spin_lock_irqsave(&lp->window_lock, flags); + /* Clear any transactions in progress. */ + outw(0, ioaddr + RunnerWrCtrl); + outw(0, ioaddr + RunnerRdCtrl); + + /* Set the station address and mask. */ + EL3WINDOW(2); + for (i = 0; i < 6; i++) + outb(dev->dev_addr[i], ioaddr + i); + for (; i < 12; i+=2) + outw(0, ioaddr + i); + + /* Reset config options */ + EL3WINDOW(3); + outb((dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl); + outl((lp->autoselect ? 0x01000000 : 0) | 0x0062001b, + ioaddr + Wn3_Config); + /* Roadrunner only: Turn on the MII transceiver. */ + outw(0x8040, ioaddr + Wn3_Options); + mdelay(1); + outw(0xc040, ioaddr + Wn3_Options); + EL3WINDOW(1); + spin_unlock_irqrestore(&lp->window_lock, flags); + + tc574_wait_for_completion(dev, TxReset); + tc574_wait_for_completion(dev, RxReset); + mdelay(1); + spin_lock_irqsave(&lp->window_lock, flags); + EL3WINDOW(3); + outw(0x8040, ioaddr + Wn3_Options); + + /* Switch to the stats window, and clear all stats by reading. */ + outw(StatsDisable, ioaddr + EL3_CMD); + EL3WINDOW(6); + for (i = 0; i < 10; i++) + inb(ioaddr + i); + inw(ioaddr + 10); + inw(ioaddr + 12); + EL3WINDOW(4); + inb(ioaddr + 12); + inb(ioaddr + 13); + + /* .. enable any extra statistics bits.. */ + outw(0x0040, ioaddr + Wn4_NetDiag); + + EL3WINDOW(1); + spin_unlock_irqrestore(&lp->window_lock, flags); + + /* .. re-sync MII and re-fill what NWay is advertising. */ + mdio_sync(ioaddr, 32); + mdio_write(ioaddr, lp->phys, 4, lp->advertising); + if (!auto_polarity) { + /* works for TDK 78Q2120 series MII's */ + i = mdio_read(ioaddr, lp->phys, 16) | 0x20; + mdio_write(ioaddr, lp->phys, 16, i); + } + + spin_lock_irqsave(&lp->window_lock, flags); + /* Switch to register set 1 for normal use, just for TxFree. */ + set_rx_mode(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); + outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ + outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ + outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ + /* Allow status bits to be seen. */ + outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD); + /* Ack all pending events, and set active indicator mask. */ + outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + ioaddr + EL3_CMD); + outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull + | AdapterFailure | RxEarly, ioaddr + EL3_CMD); +} + +static int el3_open(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + + if (!pcmcia_dev_present(link)) + return -ENODEV; + + link->open++; + netif_start_queue(dev); + + tc574_reset(dev); + lp->media.function = media_check; + lp->media.data = (unsigned long) dev; + lp->media.expires = jiffies + HZ; + add_timer(&lp->media); + + dev_dbg(&link->dev, "%s: opened, status %4.4x.\n", + dev->name, inw(dev->base_addr + EL3_STATUS)); + + return 0; +} + +static void el3_tx_timeout(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + + netdev_notice(dev, "Transmit timed out!\n"); + dump_status(dev); + dev->stats.tx_errors++; + dev->trans_start = jiffies; /* prevent tx timeout */ + /* Issue TX_RESET and TX_START commands. */ + tc574_wait_for_completion(dev, TxReset); + outw(TxEnable, ioaddr + EL3_CMD); + netif_wake_queue(dev); +} + +static void pop_tx_status(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + int i; + + /* Clear the Tx status stack. */ + for (i = 32; i > 0; i--) { + u_char tx_status = inb(ioaddr + TxStatus); + if (!(tx_status & 0x84)) + break; + /* reset transmitter on jabber error or underrun */ + if (tx_status & 0x30) + tc574_wait_for_completion(dev, TxReset); + if (tx_status & 0x38) { + pr_debug("%s: transmit error: status 0x%02x\n", + dev->name, tx_status); + outw(TxEnable, ioaddr + EL3_CMD); + dev->stats.tx_aborted_errors++; + } + outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */ + } +} + +static netdev_tx_t el3_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + struct el3_private *lp = netdev_priv(dev); + unsigned long flags; + + pr_debug("%s: el3_start_xmit(length = %ld) called, " + "status %4.4x.\n", dev->name, (long)skb->len, + inw(ioaddr + EL3_STATUS)); + + spin_lock_irqsave(&lp->window_lock, flags); + + dev->stats.tx_bytes += skb->len; + + /* Put out the doubleword header... */ + outw(skb->len, ioaddr + TX_FIFO); + outw(0, ioaddr + TX_FIFO); + /* ... and the packet rounded to a doubleword. */ + outsl(ioaddr + TX_FIFO, skb->data, (skb->len+3)>>2); + + /* TxFree appears only in Window 1, not offset 0x1c. */ + if (inw(ioaddr + TxFree) <= 1536) { + netif_stop_queue(dev); + /* Interrupt us when the FIFO has room for max-sized packet. + The threshold is in units of dwords. */ + outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); + } + + pop_tx_status(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +/* The EL3 interrupt handler. */ +static irqreturn_t el3_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr; + unsigned status; + int work_budget = max_interrupt_work; + int handled = 0; + + if (!netif_device_present(dev)) + return IRQ_NONE; + ioaddr = dev->base_addr; + + pr_debug("%s: interrupt, status %4.4x.\n", + dev->name, inw(ioaddr + EL3_STATUS)); + + spin_lock(&lp->window_lock); + + while ((status = inw(ioaddr + EL3_STATUS)) & + (IntLatch | RxComplete | RxEarly | StatsFull)) { + if (!netif_device_present(dev) || + ((status & 0xe000) != 0x2000)) { + pr_debug("%s: Interrupt from dead card\n", dev->name); + break; + } + + handled = 1; + + if (status & RxComplete) + work_budget = el3_rx(dev, work_budget); + + if (status & TxAvailable) { + pr_debug(" TX room bit was handled.\n"); + /* There's room in the FIFO for a full-sized packet. */ + outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); + netif_wake_queue(dev); + } + + if (status & TxComplete) + pop_tx_status(dev); + + if (status & (AdapterFailure | RxEarly | StatsFull)) { + /* Handle all uncommon interrupts. */ + if (status & StatsFull) + update_stats(dev); + if (status & RxEarly) { + work_budget = el3_rx(dev, work_budget); + outw(AckIntr | RxEarly, ioaddr + EL3_CMD); + } + if (status & AdapterFailure) { + u16 fifo_diag; + EL3WINDOW(4); + fifo_diag = inw(ioaddr + Wn4_FIFODiag); + EL3WINDOW(1); + netdev_notice(dev, "adapter failure, FIFO diagnostic register %04x\n", + fifo_diag); + if (fifo_diag & 0x0400) { + /* Tx overrun */ + tc574_wait_for_completion(dev, TxReset); + outw(TxEnable, ioaddr + EL3_CMD); + } + if (fifo_diag & 0x2000) { + /* Rx underrun */ + tc574_wait_for_completion(dev, RxReset); + set_rx_mode(dev); + outw(RxEnable, ioaddr + EL3_CMD); + } + outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD); + } + } + + if (--work_budget < 0) { + pr_debug("%s: Too much work in interrupt, " + "status %4.4x.\n", dev->name, status); + /* Clear all interrupts */ + outw(AckIntr | 0xFF, ioaddr + EL3_CMD); + break; + } + /* Acknowledge the IRQ. */ + outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); + } + + pr_debug("%s: exiting interrupt, status %4.4x.\n", + dev->name, inw(ioaddr + EL3_STATUS)); + + spin_unlock(&lp->window_lock); + return IRQ_RETVAL(handled); +} + +/* + This timer serves two purposes: to check for missed interrupts + (and as a last resort, poll the NIC for events), and to monitor + the MII, reporting changes in cable status. +*/ +static void media_check(unsigned long arg) +{ + struct net_device *dev = (struct net_device *) arg; + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + unsigned long flags; + unsigned short /* cable, */ media, partner; + + if (!netif_device_present(dev)) + goto reschedule; + + /* Check for pending interrupt with expired latency timer: with + this, we can limp along even if the interrupt is blocked */ + if ((inw(ioaddr + EL3_STATUS) & IntLatch) && (inb(ioaddr + Timer) == 0xff)) { + if (!lp->fast_poll) + netdev_info(dev, "interrupt(s) dropped!\n"); + + local_irq_save(flags); + el3_interrupt(dev->irq, dev); + local_irq_restore(flags); + + lp->fast_poll = HZ; + } + if (lp->fast_poll) { + lp->fast_poll--; + lp->media.expires = jiffies + 2*HZ/100; + add_timer(&lp->media); + return; + } + + spin_lock_irqsave(&lp->window_lock, flags); + EL3WINDOW(4); + media = mdio_read(ioaddr, lp->phys, 1); + partner = mdio_read(ioaddr, lp->phys, 5); + EL3WINDOW(1); + + if (media != lp->media_status) { + if ((media ^ lp->media_status) & 0x0004) + netdev_info(dev, "%s link beat\n", + (lp->media_status & 0x0004) ? "lost" : "found"); + if ((media ^ lp->media_status) & 0x0020) { + lp->partner = 0; + if (lp->media_status & 0x0020) { + netdev_info(dev, "autonegotiation restarted\n"); + } else if (partner) { + partner &= lp->advertising; + lp->partner = partner; + netdev_info(dev, "autonegotiation complete: " + "%dbaseT-%cD selected\n", + (partner & 0x0180) ? 100 : 10, + (partner & 0x0140) ? 'F' : 'H'); + } else { + netdev_info(dev, "link partner did not autonegotiate\n"); + } + + EL3WINDOW(3); + outb((partner & 0x0140 ? 0x20 : 0) | + (dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl); + EL3WINDOW(1); + + } + if (media & 0x0010) + netdev_info(dev, "remote fault detected\n"); + if (media & 0x0002) + netdev_info(dev, "jabber detected\n"); + lp->media_status = media; + } + spin_unlock_irqrestore(&lp->window_lock, flags); + +reschedule: + lp->media.expires = jiffies + HZ; + add_timer(&lp->media); +} + +static struct net_device_stats *el3_get_stats(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + + if (netif_device_present(dev)) { + unsigned long flags; + spin_lock_irqsave(&lp->window_lock, flags); + update_stats(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); + } + return &dev->stats; +} + +/* Update statistics. + Surprisingly this need not be run single-threaded, but it effectively is. + The counters clear when read, so the adds must merely be atomic. + */ +static void update_stats(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + u8 rx, tx, up; + + pr_debug("%s: updating the statistics.\n", dev->name); + + if (inw(ioaddr+EL3_STATUS) == 0xffff) /* No card. */ + return; + + /* Unlike the 3c509 we need not turn off stats updates while reading. */ + /* Switch to the stats window, and read everything. */ + EL3WINDOW(6); + dev->stats.tx_carrier_errors += inb(ioaddr + 0); + dev->stats.tx_heartbeat_errors += inb(ioaddr + 1); + /* Multiple collisions. */ inb(ioaddr + 2); + dev->stats.collisions += inb(ioaddr + 3); + dev->stats.tx_window_errors += inb(ioaddr + 4); + dev->stats.rx_fifo_errors += inb(ioaddr + 5); + dev->stats.tx_packets += inb(ioaddr + 6); + up = inb(ioaddr + 9); + dev->stats.tx_packets += (up&0x30) << 4; + /* Rx packets */ inb(ioaddr + 7); + /* Tx deferrals */ inb(ioaddr + 8); + rx = inw(ioaddr + 10); + tx = inw(ioaddr + 12); + + EL3WINDOW(4); + /* BadSSD */ inb(ioaddr + 12); + up = inb(ioaddr + 13); + + EL3WINDOW(1); +} + +static int el3_rx(struct net_device *dev, int worklimit) +{ + unsigned int ioaddr = dev->base_addr; + short rx_status; + + pr_debug("%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n", + dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus)); + while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) && + worklimit > 0) { + worklimit--; + if (rx_status & 0x4000) { /* Error, update stats. */ + short error = rx_status & 0x3800; + dev->stats.rx_errors++; + switch (error) { + case 0x0000: dev->stats.rx_over_errors++; break; + case 0x0800: dev->stats.rx_length_errors++; break; + case 0x1000: dev->stats.rx_frame_errors++; break; + case 0x1800: dev->stats.rx_length_errors++; break; + case 0x2000: dev->stats.rx_frame_errors++; break; + case 0x2800: dev->stats.rx_crc_errors++; break; + } + } else { + short pkt_len = rx_status & 0x7ff; + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_len+5); + + pr_debug(" Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + if (skb != NULL) { + skb_reserve(skb, 2); + insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len), + ((pkt_len+3)>>2)); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } else { + pr_debug("%s: couldn't allocate a sk_buff of" + " size %d.\n", dev->name, pkt_len); + dev->stats.rx_dropped++; + } + } + tc574_wait_for_completion(dev, RxDiscard); + } + + return worklimit; +} + +/* Provide ioctl() calls to examine the MII xcvr state. */ +static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + struct mii_ioctl_data *data = if_mii(rq); + int phy = lp->phys & 0x1f; + + pr_debug("%s: In ioct(%-.6s, %#4.4x) %4.4x %4.4x %4.4x %4.4x.\n", + dev->name, rq->ifr_ifrn.ifrn_name, cmd, + data->phy_id, data->reg_num, data->val_in, data->val_out); + + switch(cmd) { + case SIOCGMIIPHY: /* Get the address of the PHY in use. */ + data->phy_id = phy; + case SIOCGMIIREG: /* Read the specified MII register. */ + { + int saved_window; + unsigned long flags; + + spin_lock_irqsave(&lp->window_lock, flags); + saved_window = inw(ioaddr + EL3_CMD) >> 13; + EL3WINDOW(4); + data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f, + data->reg_num & 0x1f); + EL3WINDOW(saved_window); + spin_unlock_irqrestore(&lp->window_lock, flags); + return 0; + } + case SIOCSMIIREG: /* Write the specified MII register */ + { + int saved_window; + unsigned long flags; + + spin_lock_irqsave(&lp->window_lock, flags); + saved_window = inw(ioaddr + EL3_CMD) >> 13; + EL3WINDOW(4); + mdio_write(ioaddr, data->phy_id & 0x1f, + data->reg_num & 0x1f, data->val_in); + EL3WINDOW(saved_window); + spin_unlock_irqrestore(&lp->window_lock, flags); + return 0; + } + default: + return -EOPNOTSUPP; + } +} + +/* The Odie chip has a 64 bin multicast filter, but the bit layout is not + documented. Until it is we revert to receiving all multicast frames when + any multicast reception is desired. + Note: My other drivers emit a log message whenever promiscuous mode is + entered to help detect password sniffers. This is less desirable on + typical PC card machines, so we omit the message. + */ + +static void set_rx_mode(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + + if (dev->flags & IFF_PROMISC) + outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm, + ioaddr + EL3_CMD); + else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI)) + outw(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD); + else + outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); +} + +static void set_multicast_list(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&lp->window_lock, flags); + set_rx_mode(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); +} + +static int el3_close(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + struct el3_private *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + + dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name); + + if (pcmcia_dev_present(link)) { + unsigned long flags; + + /* Turn off statistics ASAP. We update lp->stats below. */ + outw(StatsDisable, ioaddr + EL3_CMD); + + /* Disable the receiver and transmitter. */ + outw(RxDisable, ioaddr + EL3_CMD); + outw(TxDisable, ioaddr + EL3_CMD); + + /* Note: Switching to window 0 may disable the IRQ. */ + EL3WINDOW(0); + spin_lock_irqsave(&lp->window_lock, flags); + update_stats(dev); + spin_unlock_irqrestore(&lp->window_lock, flags); + + /* force interrupts off */ + outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); + } + + link->open--; + netif_stop_queue(dev); + del_timer_sync(&lp->media); + + return 0; +} + +static const struct pcmcia_device_id tc574_ids[] = { + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0574), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0556, "cis/3CCFEM556.cis"), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, tc574_ids); + +static struct pcmcia_driver tc574_driver = { + .owner = THIS_MODULE, + .name = "3c574_cs", + .probe = tc574_probe, + .remove = tc574_detach, + .id_table = tc574_ids, + .suspend = tc574_suspend, + .resume = tc574_resume, +}; + +static int __init init_tc574(void) +{ + return pcmcia_register_driver(&tc574_driver); +} + +static void __exit exit_tc574(void) +{ + pcmcia_unregister_driver(&tc574_driver); +} + +module_init(init_tc574); +module_exit(exit_tc574); |