diff options
Diffstat (limited to 'drivers/net/dsa/sja1105/sja1105_main.c')
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_main.c | 363 |
1 files changed, 282 insertions, 81 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 4ca029650993..7692338730df 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -25,6 +25,8 @@ #include "sja1105_sgmii.h" #include "sja1105_tas.h" +#define SJA1105_UNKNOWN_MULTICAST 0x010000000000ull + static const struct dsa_switch_ops sja1105_switch_ops; static void sja1105_hw_reset(struct gpio_desc *gpio, unsigned int pulse_len, @@ -42,15 +44,16 @@ static void sja1105_port_allow_traffic(struct sja1105_l2_forwarding_entry *l2_fwd, int from, int to, bool allow) { - if (allow) { - l2_fwd[from].bc_domain |= BIT(to); + if (allow) l2_fwd[from].reach_port |= BIT(to); - l2_fwd[from].fl_domain |= BIT(to); - } else { - l2_fwd[from].bc_domain &= ~BIT(to); + else l2_fwd[from].reach_port &= ~BIT(to); - l2_fwd[from].fl_domain &= ~BIT(to); - } +} + +static bool sja1105_can_forward(struct sja1105_l2_forwarding_entry *l2_fwd, + int from, int to) +{ + return !!(l2_fwd[from].reach_port & BIT(to)); } /* Structure used to temporarily transport device tree @@ -220,17 +223,43 @@ static int sja1105_init_mii_settings(struct sja1105_private *priv, static int sja1105_init_static_fdb(struct sja1105_private *priv) { + struct sja1105_l2_lookup_entry *l2_lookup; struct sja1105_table *table; + int port; table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; - /* We only populate the FDB table through dynamic - * L2 Address Lookup entries + /* We only populate the FDB table through dynamic L2 Address Lookup + * entries, except for a special entry at the end which is a catch-all + * for unknown multicast and will be used to control flooding domain. */ if (table->entry_count) { kfree(table->entries); table->entry_count = 0; } + + if (!priv->info->can_limit_mcast_flood) + return 0; + + table->entries = kcalloc(1, table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = 1; + l2_lookup = table->entries; + + /* All L2 multicast addresses have an odd first octet */ + l2_lookup[0].macaddr = SJA1105_UNKNOWN_MULTICAST; + l2_lookup[0].mask_macaddr = SJA1105_UNKNOWN_MULTICAST; + l2_lookup[0].lockeds = true; + l2_lookup[0].index = SJA1105_MAX_L2_LOOKUP_COUNT - 1; + + /* Flood multicast to every port by default */ + for (port = 0; port < priv->ds->num_ports; port++) + if (!dsa_is_unused_port(priv->ds, port)) + l2_lookup[0].destports |= BIT(port); + return 0; } @@ -317,7 +346,7 @@ static int sja1105_init_static_vlan(struct sja1105_private *priv) table->entry_count = 0; } - table->entries = kcalloc(1, table->ops->unpacked_entry_size, + table->entries = kzalloc(table->ops->unpacked_entry_size, GFP_KERNEL); if (!table->entries) return -ENOMEM; @@ -385,11 +414,23 @@ static int sja1105_init_l2_forwarding(struct sja1105_private *priv) for (j = 0; j < SJA1105_NUM_TC; j++) l2fwd[i].vlan_pmap[j] = j; + /* All ports start up with egress flooding enabled, + * including the CPU port. + */ + priv->ucast_egress_floods |= BIT(i); + priv->bcast_egress_floods |= BIT(i); + if (i == upstream) continue; sja1105_port_allow_traffic(l2fwd, i, upstream, true); sja1105_port_allow_traffic(l2fwd, upstream, i, true); + + l2fwd[i].bc_domain = BIT(upstream); + l2fwd[i].fl_domain = BIT(upstream); + + l2fwd[upstream].bc_domain |= BIT(i); + l2fwd[upstream].fl_domain |= BIT(i); } /* Next 8 entries define VLAN PCP mapping from ingress to egress. * Create a one-to-one mapping. @@ -1514,6 +1555,12 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port, */ if (!(l2_lookup.destports & BIT(port))) continue; + + /* We need to hide the FDB entry for unknown multicast */ + if (l2_lookup.macaddr == SJA1105_UNKNOWN_MULTICAST && + l2_lookup.mask_macaddr == SJA1105_UNKNOWN_MULTICAST) + continue; + u64_to_ether_addr(l2_lookup.macaddr, macaddr); /* We need to hide the dsa_8021q VLANs from the user. */ @@ -1524,17 +1571,10 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port, return 0; } -/* This callback needs to be present */ -static int sja1105_mdb_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_mdb *mdb) -{ - return 0; -} - -static void sja1105_mdb_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_mdb *mdb) +static int sja1105_mdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) { - sja1105_fdb_add(ds, port, mdb->addr, mdb->vid); + return sja1105_fdb_add(ds, port, mdb->addr, mdb->vid); } static int sja1105_mdb_del(struct dsa_switch *ds, int port, @@ -1543,6 +1583,50 @@ static int sja1105_mdb_del(struct dsa_switch *ds, int port, return sja1105_fdb_del(ds, port, mdb->addr, mdb->vid); } +/* Common function for unicast and broadcast flood configuration. + * Flooding is configured between each {ingress, egress} port pair, and since + * the bridge's semantics are those of "egress flooding", it means we must + * enable flooding towards this port from all ingress ports that are in the + * same forwarding domain. + */ +static int sja1105_manage_flood_domains(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_entry *l2_fwd; + struct dsa_switch *ds = priv->ds; + int from, to, rc; + + l2_fwd = priv->static_config.tables[BLK_IDX_L2_FORWARDING].entries; + + for (from = 0; from < ds->num_ports; from++) { + u64 fl_domain = 0, bc_domain = 0; + + for (to = 0; to < priv->ds->num_ports; to++) { + if (!sja1105_can_forward(l2_fwd, from, to)) + continue; + + if (priv->ucast_egress_floods & BIT(to)) + fl_domain |= BIT(to); + if (priv->bcast_egress_floods & BIT(to)) + bc_domain |= BIT(to); + } + + /* Nothing changed, nothing to do */ + if (l2_fwd[from].fl_domain == fl_domain && + l2_fwd[from].bc_domain == bc_domain) + continue; + + l2_fwd[from].fl_domain = fl_domain; + l2_fwd[from].bc_domain = bc_domain; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, + from, &l2_fwd[from], true); + if (rc < 0) + return rc; + } + + return 0; +} + static int sja1105_bridge_member(struct dsa_switch *ds, int port, struct net_device *br, bool member) { @@ -1580,8 +1664,12 @@ static int sja1105_bridge_member(struct dsa_switch *ds, int port, return rc; } - return sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, - port, &l2_fwd[port], true); + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, + port, &l2_fwd[port], true); + if (rc) + return rc; + + return sja1105_manage_flood_domains(priv); } static void sja1105_bridge_stp_state_set(struct dsa_switch *ds, int port, @@ -1612,12 +1700,12 @@ static void sja1105_bridge_stp_state_set(struct dsa_switch *ds, int port, case BR_STATE_LEARNING: mac[port].ingress = true; mac[port].egress = false; - mac[port].dyn_learn = true; + mac[port].dyn_learn = !!(priv->learn_ena & BIT(port)); break; case BR_STATE_FORWARDING: mac[port].ingress = true; mac[port].egress = true; - mac[port].dyn_learn = true; + mac[port].dyn_learn = !!(priv->learn_ena & BIT(port)); break; default: dev_err(ds->dev, "invalid STP state: %d\n", state); @@ -2607,35 +2695,12 @@ out: return rc; } -static int sja1105_vlan_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct sja1105_private *priv = ds->priv; - u16 vid; - - if (priv->vlan_state == SJA1105_VLAN_FILTERING_FULL) - return 0; - - /* If the user wants best-effort VLAN filtering (aka vlan_filtering - * bridge plus tagging), be sure to at least deny alterations to the - * configuration done by dsa_8021q. - */ - for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { - if (vid_is_dsa_8021q(vid)) { - dev_err(ds->dev, "Range 1024-3071 reserved for dsa_8021q operation\n"); - return -EBUSY; - } - } - - return 0; -} - /* The TPID setting belongs to the General Parameters table, * which can only be partially reconfigured at runtime (and not the TPID). * So a switch reset is required. */ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, - struct switchdev_trans *trans) + struct netlink_ext_ack *extack) { struct sja1105_l2_lookup_params_entry *l2_lookup_params; struct sja1105_general_params_entry *general_params; @@ -2647,16 +2712,12 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, u16 tpid, tpid2; int rc; - if (switchdev_trans_ph_prepare(trans)) { - list_for_each_entry(rule, &priv->flow_block.rules, list) { - if (rule->type == SJA1105_RULE_VL) { - dev_err(ds->dev, - "Cannot change VLAN filtering with active VL rules\n"); - return -EBUSY; - } + list_for_each_entry(rule, &priv->flow_block.rules, list) { + if (rule->type == SJA1105_RULE_VL) { + NL_SET_ERR_MSG_MOD(extack, + "Cannot change VLAN filtering with active VL rules"); + return -EBUSY; } - - return 0; } if (enabled) { @@ -2736,7 +2797,7 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, rc = sja1105_static_config_reload(priv, SJA1105_VLAN_FILTERING); if (rc) - dev_err(ds->dev, "Failed to change VLAN Ethertype\n"); + NL_SET_ERR_MSG_MOD(extack, "Failed to change VLAN Ethertype"); /* Switch port identification based on 802.1Q is only passable * if we are not under a vlan_filtering bridge. So make sure @@ -2794,29 +2855,36 @@ static int sja1105_vlan_del_one(struct dsa_switch *ds, int port, u16 vid, return 0; } -static void sja1105_vlan_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) +static int sja1105_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) { struct sja1105_private *priv = ds->priv; bool vlan_table_changed = false; - u16 vid; int rc; - for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { - rc = sja1105_vlan_add_one(ds, port, vid, vlan->flags, - &priv->bridge_vlans); - if (rc < 0) - return; - if (rc > 0) - vlan_table_changed = true; + /* If the user wants best-effort VLAN filtering (aka vlan_filtering + * bridge plus tagging), be sure to at least deny alterations to the + * configuration done by dsa_8021q. + */ + if (priv->vlan_state != SJA1105_VLAN_FILTERING_FULL && + vid_is_dsa_8021q(vlan->vid)) { + NL_SET_ERR_MSG_MOD(extack, + "Range 1024-3071 reserved for dsa_8021q operation"); + return -EBUSY; } + rc = sja1105_vlan_add_one(ds, port, vlan->vid, vlan->flags, + &priv->bridge_vlans); + if (rc < 0) + return rc; + if (rc > 0) + vlan_table_changed = true; + if (!vlan_table_changed) - return; + return 0; - rc = sja1105_build_vlan_table(priv, true); - if (rc) - dev_err(ds->dev, "Failed to build VLAN table: %d\n", rc); + return sja1105_build_vlan_table(priv, true); } static int sja1105_vlan_del(struct dsa_switch *ds, int port, @@ -2824,14 +2892,11 @@ static int sja1105_vlan_del(struct dsa_switch *ds, int port, { struct sja1105_private *priv = ds->priv; bool vlan_table_changed = false; - u16 vid; int rc; - for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { - rc = sja1105_vlan_del_one(ds, port, vid, &priv->bridge_vlans); - if (rc > 0) - vlan_table_changed = true; - } + rc = sja1105_vlan_del_one(ds, port, vlan->vid, &priv->bridge_vlans); + if (rc > 0) + vlan_table_changed = true; if (!vlan_table_changed) return 0; @@ -2934,7 +2999,7 @@ static int sja1105_setup(struct dsa_switch *ds) ds->mtu_enforcement_ingress = true; - ds->configure_vlan_while_not_filtering = true; + priv->best_effort_vlan_filtering = true; rc = sja1105_devlink_setup(ds); if (rc < 0) @@ -3274,6 +3339,142 @@ static void sja1105_port_policer_del(struct dsa_switch *ds, int port) sja1105_static_config_reload(priv, SJA1105_BEST_EFFORT_POLICING); } +static int sja1105_port_set_learning(struct sja1105_private *priv, int port, + bool enabled) +{ + struct sja1105_mac_config_entry *mac; + int rc; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + mac[port].dyn_learn = enabled; + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, + &mac[port], true); + if (rc) + return rc; + + if (enabled) + priv->learn_ena |= BIT(port); + else + priv->learn_ena &= ~BIT(port); + + return 0; +} + +static int sja1105_port_ucast_bcast_flood(struct sja1105_private *priv, int to, + struct switchdev_brport_flags flags) +{ + if (flags.mask & BR_FLOOD) { + if (flags.val & BR_FLOOD) + priv->ucast_egress_floods |= BIT(to); + else + priv->ucast_egress_floods |= BIT(to); + } + + if (flags.mask & BR_BCAST_FLOOD) { + if (flags.val & BR_BCAST_FLOOD) + priv->bcast_egress_floods |= BIT(to); + else + priv->bcast_egress_floods |= BIT(to); + } + + return sja1105_manage_flood_domains(priv); +} + +static int sja1105_port_mcast_flood(struct sja1105_private *priv, int to, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct sja1105_l2_lookup_entry *l2_lookup; + struct sja1105_table *table; + int match; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; + l2_lookup = table->entries; + + for (match = 0; match < table->entry_count; match++) + if (l2_lookup[match].macaddr == SJA1105_UNKNOWN_MULTICAST && + l2_lookup[match].mask_macaddr == SJA1105_UNKNOWN_MULTICAST) + break; + + if (match == table->entry_count) { + NL_SET_ERR_MSG_MOD(extack, + "Could not find FDB entry for unknown multicast"); + return -ENOSPC; + } + + if (flags.val & BR_MCAST_FLOOD) + l2_lookup[match].destports |= BIT(to); + else + l2_lookup[match].destports &= ~BIT(to); + + return sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + l2_lookup[match].index, + &l2_lookup[match], + true); +} + +static int sja1105_port_pre_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct sja1105_private *priv = ds->priv; + + if (flags.mask & ~(BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | + BR_BCAST_FLOOD)) + return -EINVAL; + + if (flags.mask & (BR_FLOOD | BR_MCAST_FLOOD) && + !priv->info->can_limit_mcast_flood) { + bool multicast = !!(flags.val & BR_MCAST_FLOOD); + bool unicast = !!(flags.val & BR_FLOOD); + + if (unicast != multicast) { + NL_SET_ERR_MSG_MOD(extack, + "This chip cannot configure multicast flooding independently of unicast"); + return -EINVAL; + } + } + + return 0; +} + +static int sja1105_port_bridge_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + struct sja1105_private *priv = ds->priv; + int rc; + + if (flags.mask & BR_LEARNING) { + bool learn_ena = !!(flags.val & BR_LEARNING); + + rc = sja1105_port_set_learning(priv, port, learn_ena); + if (rc) + return rc; + } + + if (flags.mask & (BR_FLOOD | BR_BCAST_FLOOD)) { + rc = sja1105_port_ucast_bcast_flood(priv, port, flags); + if (rc) + return rc; + } + + /* For chips that can't offload BR_MCAST_FLOOD independently, there + * is nothing to do here, we ensured the configuration is in sync by + * offloading BR_FLOOD. + */ + if (flags.mask & BR_MCAST_FLOOD && priv->info->can_limit_mcast_flood) { + rc = sja1105_port_mcast_flood(priv, port, flags, + extack); + if (rc) + return rc; + } + + return 0; +} + static const struct dsa_switch_ops sja1105_switch_ops = { .get_tag_protocol = sja1105_get_tag_protocol, .setup = sja1105_setup, @@ -3297,12 +3498,12 @@ static const struct dsa_switch_ops sja1105_switch_ops = { .port_fdb_del = sja1105_fdb_del, .port_bridge_join = sja1105_bridge_join, .port_bridge_leave = sja1105_bridge_leave, + .port_pre_bridge_flags = sja1105_port_pre_bridge_flags, + .port_bridge_flags = sja1105_port_bridge_flags, .port_stp_state_set = sja1105_bridge_stp_state_set, - .port_vlan_prepare = sja1105_vlan_prepare, .port_vlan_filtering = sja1105_vlan_filtering, .port_vlan_add = sja1105_vlan_add, .port_vlan_del = sja1105_vlan_del, - .port_mdb_prepare = sja1105_mdb_prepare, .port_mdb_add = sja1105_mdb_add, .port_mdb_del = sja1105_mdb_del, .port_hwtstamp_get = sja1105_hwtstamp_get, |