diff options
Diffstat (limited to 'drivers/net/dsa/b53/b53_serdes.h')
| -rw-r--r-- | drivers/net/dsa/b53/b53_serdes.h | 128 |
1 files changed, 128 insertions, 0 deletions
diff --git a/drivers/net/dsa/b53/b53_serdes.h b/drivers/net/dsa/b53/b53_serdes.h new file mode 100644 index 000000000000..3bb4f91aec9e --- /dev/null +++ b/drivers/net/dsa/b53/b53_serdes.h @@ -0,0 +1,128 @@ +/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause + * + * Northstar Plus switch SerDes/SGMII PHY definitions + * + * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com> + */ + +#include <linux/phy.h> +#include <linux/types.h> + +/* Non-standard page used to access SerDes PHY registers on NorthStar Plus */ +#define B53_SERDES_PAGE 0x16 +#define B53_SERDES_BLKADDR 0x3e +#define B53_SERDES_LANE 0x3c + +#define B53_SERDES_ID0 0x20 +#define SERDES_ID0_MODEL_MASK 0x3f +#define SERDES_ID0_REV_NUM_SHIFT 11 +#define SERDES_ID0_REV_NUM_MASK 0x7 +#define SERDES_ID0_REV_LETTER_SHIFT 14 + +#define B53_SERDES_MII_REG(x) (0x20 + (x) * 2) +#define B53_SERDES_DIGITAL_CONTROL(x) (0x1e + (x) * 2) +#define B53_SERDES_DIGITAL_STATUS 0x28 + +/* SERDES_DIGITAL_CONTROL1 */ +#define FIBER_MODE_1000X BIT(0) +#define TBI_INTERFACE BIT(1) +#define SIGNAL_DETECT_EN BIT(2) +#define INVERT_SIGNAL_DETECT BIT(3) +#define AUTODET_EN BIT(4) +#define SGMII_MASTER_MODE BIT(5) +#define DISABLE_DLL_PWRDOWN BIT(6) +#define CRC_CHECKER_DIS BIT(7) +#define COMMA_DET_EN BIT(8) +#define ZERO_COMMA_DET_EN BIT(9) +#define REMOTE_LOOPBACK BIT(10) +#define SEL_RX_PKTS_FOR_CNTR BIT(11) +#define MASTER_MDIO_PHY_SEL BIT(13) +#define DISABLE_SIGNAL_DETECT_FLT BIT(14) + +/* SERDES_DIGITAL_CONTROL2 */ +#define EN_PARALLEL_DET BIT(0) +#define DIS_FALSE_LINK BIT(1) +#define FLT_FORCE_LINK BIT(2) +#define EN_AUTONEG_ERR_TIMER BIT(3) +#define DIS_REMOTE_FAULT_SENSING BIT(4) +#define FORCE_XMIT_DATA BIT(5) +#define AUTONEG_FAST_TIMERS BIT(6) +#define DIS_CARRIER_EXTEND BIT(7) +#define DIS_TRRR_GENERATION BIT(8) +#define BYPASS_PCS_RX BIT(9) +#define BYPASS_PCS_TX BIT(10) +#define TEST_CNTR_EN BIT(11) +#define TX_PACKET_SEQ_TEST BIT(12) +#define TX_IDLE_JAM_SEQ_TEST BIT(13) +#define CLR_BER_CNTR BIT(14) + +/* SERDES_DIGITAL_CONTROL3 */ +#define TX_FIFO_RST BIT(0) +#define FIFO_ELAST_TX_RX_SHIFT 1 +#define FIFO_ELAST_TX_RX_5K 0 +#define FIFO_ELAST_TX_RX_10K 1 +#define FIFO_ELAST_TX_RX_13_5K 2 +#define FIFO_ELAST_TX_RX_18_5K 3 +#define BLOCK_TXEN_MODE BIT(9) +#define JAM_FALSE_CARRIER_MODE BIT(10) +#define EXT_PHY_CRS_MODE BIT(11) +#define INVERT_EXT_PHY_CRS BIT(12) +#define DISABLE_TX_CRS BIT(13) + +/* SERDES_DIGITAL_STATUS */ +#define SGMII_MODE BIT(0) +#define LINK_STATUS BIT(1) +#define DUPLEX_STATUS BIT(2) +#define SPEED_STATUS_SHIFT 3 +#define SPEED_STATUS_10 0 +#define SPEED_STATUS_100 1 +#define SPEED_STATUS_1000 2 +#define SPEED_STATUS_2500 3 +#define SPEED_STATUS_MASK SPEED_STATUS_2500 +#define PAUSE_RESOLUTION_TX_SIDE BIT(5) +#define PAUSE_RESOLUTION_RX_SIDE BIT(6) +#define LINK_STATUS_CHANGE BIT(7) +#define EARLY_END_EXT_DET BIT(8) +#define CARRIER_EXT_ERR_DET BIT(9) +#define RX_ERR_DET BIT(10) +#define TX_ERR_DET BIT(11) +#define CRC_ERR_DET BIT(12) +#define FALSE_CARRIER_ERR_DET BIT(13) +#define RXFIFO_ERR_DET BIT(14) +#define TXFIFO_ERR_DET BIT(15) + +/* Block offsets */ +#define SERDES_DIGITAL_BLK 0x8300 +#define SERDES_ID0 0x8310 +#define SERDES_MII_BLK 0xffe0 +#define SERDES_XGXSBLK0_BLOCKADDRESS 0xffd0 + +struct phylink_link_state; + +static inline u8 b53_serdes_map_lane(struct b53_device *dev, int port) +{ + if (!dev->ops->serdes_map_lane) + return B53_INVALID_LANE; + + return dev->ops->serdes_map_lane(dev, port); +} + +int b53_serdes_get_link(struct b53_device *dev, int port); +int b53_serdes_link_state(struct b53_device *dev, int port, + struct phylink_link_state *state); +void b53_serdes_config(struct b53_device *dev, int port, unsigned int mode, + const struct phylink_link_state *state); +void b53_serdes_an_restart(struct b53_device *dev, int port); +void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode, + phy_interface_t interface, bool link_up); +void b53_serdes_phylink_validate(struct b53_device *dev, int port, + unsigned long *supported, + struct phylink_link_state *state); +#if IS_ENABLED(CONFIG_B53_SERDES) +int b53_serdes_init(struct b53_device *dev, int port); +#else +static inline int b53_serdes_init(struct b53_device *dev, int port) +{ + return -ENODEV; +} +#endif |