diff options
Diffstat (limited to 'drivers/mtd/nand/raw/Kconfig')
| -rw-r--r-- | drivers/mtd/nand/raw/Kconfig | 157 |
1 files changed, 94 insertions, 63 deletions
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 6871ff0fd300..5fc9a1bde4ac 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -44,12 +44,12 @@ config MTD_NAND_DENALI tristate config MTD_NAND_DENALI_PCI - tristate "Support Denali NAND controller on Intel Moorestown" + tristate "Support Denali NAND controller on Intel Moorestown" select MTD_NAND_DENALI depends on PCI - help - Enable the driver for NAND flash on Intel Moorestown, using the - Denali NAND controller core. + help + Enable the driver for NAND flash on Intel Moorestown, using the + Denali NAND controller core. config MTD_NAND_DENALI_DT tristate "Support Denali NAND controller as a DT device" @@ -77,9 +77,10 @@ config MTD_NAND_AMS_DELTA config MTD_NAND_OMAP2 tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone" - depends on (ARCH_OMAP2PLUS || ARCH_KEYSTONE) + depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST + depends on HAS_IOMEM help - Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4 + Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4 and Keystone platforms. config MTD_NAND_OMAP_BCH @@ -137,7 +138,7 @@ config MTD_NAND_NDFC depends on 4xx select MTD_NAND_ECC_SMC help - NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs + NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs config MTD_NAND_S3C2410_CLKSTOP bool "Samsung S3C NAND IDLE clock stop" @@ -152,6 +153,7 @@ config MTD_NAND_S3C2410_CLKSTOP config MTD_NAND_TANGO tristate "NAND Flash support for Tango chips" depends on ARCH_TANGO || COMPILE_TEST + depends on HAS_IOMEM help Enables the NAND Flash controller on Tango chips. @@ -168,40 +170,40 @@ config MTD_NAND_DISKONCHIP these devices. config MTD_NAND_DISKONCHIP_PROBE_ADVANCED - bool "Advanced detection options for DiskOnChip" - depends on MTD_NAND_DISKONCHIP - help - This option allows you to specify nonstandard address at which to - probe for a DiskOnChip, or to change the detection options. You - are unlikely to need any of this unless you are using LinuxBIOS. - Say 'N'. + bool "Advanced detection options for DiskOnChip" + depends on MTD_NAND_DISKONCHIP + help + This option allows you to specify nonstandard address at which to + probe for a DiskOnChip, or to change the detection options. You + are unlikely to need any of this unless you are using LinuxBIOS. + Say 'N'. config MTD_NAND_DISKONCHIP_PROBE_ADDRESS - hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED - depends on MTD_NAND_DISKONCHIP - default "0" - ---help--- - By default, the probe for DiskOnChip devices will look for a - DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. - This option allows you to specify a single address at which to probe - for the device, which is useful if you have other devices in that - range which get upset when they are probed. - - (Note that on PowerPC, the normal probe will only check at - 0xE4000000.) - - Normally, you should leave this set to zero, to allow the probe at - the normal addresses. + hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED + depends on MTD_NAND_DISKONCHIP + default "0" + help + By default, the probe for DiskOnChip devices will look for a + DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. + This option allows you to specify a single address at which to probe + for the device, which is useful if you have other devices in that + range which get upset when they are probed. + + (Note that on PowerPC, the normal probe will only check at + 0xE4000000.) + + Normally, you should leave this set to zero, to allow the probe at + the normal addresses. config MTD_NAND_DISKONCHIP_PROBE_HIGH - bool "Probe high addresses" - depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED - help - By default, the probe for DiskOnChip devices will look for a - DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. - This option changes to make it probe between 0xFFFC8000 and - 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be - useful to you. Say 'N'. + bool "Probe high addresses" + depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED + help + By default, the probe for DiskOnChip devices will look for a + DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. + This option changes to make it probe between 0xFFFC8000 and + 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be + useful to you. Say 'N'. config MTD_NAND_DISKONCHIP_BBTWRITE bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP" @@ -247,7 +249,8 @@ config MTD_NAND_DOCG4 config MTD_NAND_SHARPSL tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" - depends on ARCH_PXA + depends on ARCH_PXA || COMPILE_TEST + depends on HAS_IOMEM config MTD_NAND_CAFE tristate "NAND support for OLPC CAFÉ chip" @@ -274,7 +277,9 @@ config MTD_NAND_CS553X config MTD_NAND_ATMEL tristate "Support for NAND Flash / SmartMedia on AT91" - depends on ARCH_AT91 + depends on ARCH_AT91 || COMPILE_TEST + depends on HAS_IOMEM + select GENERIC_ALLOCATOR select MFD_ATMEL_SMC help Enables support for NAND Flash / Smart Media Card interface @@ -294,7 +299,8 @@ config MTD_NAND_MARVELL config MTD_NAND_SLC_LPC32XX tristate "NXP LPC32xx SLC Controller" - depends on ARCH_LPC32XX + depends on ARCH_LPC32XX || COMPILE_TEST + depends on HAS_IOMEM help Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell chips) NAND controller. This is the default for the PHYTEC 3250 @@ -305,7 +311,8 @@ config MTD_NAND_SLC_LPC32XX config MTD_NAND_MLC_LPC32XX tristate "NXP LPC32xx MLC Controller" - depends on ARCH_LPC32XX + depends on ARCH_LPC32XX || COMPILE_TEST + depends on HAS_IOMEM help Uses the LPC32XX MLC (i.e. for Multi Level Cell chips) NAND controller. This is the default for the WORK92105 controller @@ -339,17 +346,18 @@ config MTD_NAND_NANDSIM MTD nand layer. config MTD_NAND_GPMI_NAND - tristate "GPMI NAND Flash Controller driver" - depends on MTD_NAND && MXS_DMA - help - Enables NAND Flash support for IMX23, IMX28 or IMX6. - The GPMI controller is very powerful, with the help of BCH - module, it can do the hardware ECC. The GPMI supports several - NAND flashs at the same time. + tristate "GPMI NAND Flash Controller driver" + depends on MXS_DMA + help + Enables NAND Flash support for IMX23, IMX28 or IMX6. + The GPMI controller is very powerful, with the help of BCH + module, it can do the hardware ECC. The GPMI supports several + NAND flashs at the same time. config MTD_NAND_BRCMNAND tristate "Broadcom STB NAND controller" - depends on ARM || ARM64 || MIPS + depends on ARM || ARM64 || MIPS || COMPILE_TEST + depends on HAS_IOMEM help Enables the Broadcom NAND controller driver. The controller was originally designed for Set-Top Box but is used on various BCM7xxx, @@ -358,6 +366,7 @@ config MTD_NAND_BRCMNAND config MTD_NAND_BCM47XXNFLASH tristate "Support for NAND flash on BCM4706 BCMA bus" depends on BCMA_NFLASH + depends on BCMA help BCMA bus can have various flash memories attached, they are registered by bcma as platform devices. This enables driver for @@ -399,7 +408,8 @@ config MTD_NAND_FSL_ELBC config MTD_NAND_FSL_IFC tristate "NAND support for Freescale IFC controller" - depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A + depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST + depends on HAS_IOMEM select FSL_IFC select MEMORY help @@ -437,7 +447,8 @@ config MTD_NAND_VF610_NFC config MTD_NAND_MXC tristate "MXC NAND support" - depends on ARCH_MXC + depends on ARCH_MXC || COMPILE_TEST + depends on HAS_IOMEM help This enables the driver for the NAND flash controller on the MXC processors. @@ -451,15 +462,17 @@ config MTD_NAND_SH_FLCTL for NAND Flash using FLCTL. config MTD_NAND_DAVINCI - tristate "Support NAND on DaVinci/Keystone SoC" - depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) - help + tristate "Support NAND on DaVinci/Keystone SoC" + depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST + depends on HAS_IOMEM + help Enable the driver for NAND flash chips on Texas Instruments DaVinci/Keystone processors. config MTD_NAND_TXX9NDFMC tristate "NAND Flash support for TXx9 SoC" - depends on SOC_TX4938 || SOC_TX4939 + depends on SOC_TX4938 || SOC_TX4939 || COMPILE_TEST + depends on HAS_IOMEM help This enables the NAND flash controller on the TXx9 SoCs. @@ -471,28 +484,31 @@ config MTD_NAND_SOCRATES config MTD_NAND_NUC900 tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards." - depends on ARCH_W90X900 + depends on ARCH_W90X900 || COMPILE_TEST + depends on HAS_IOMEM help This enables the driver for the NAND Flash on evaluation board based on w90p910 / NUC9xx. config MTD_NAND_JZ4740 tristate "Support for JZ4740 SoC NAND controller" - depends on MACH_JZ4740 + depends on MACH_JZ4740 || COMPILE_TEST + depends on HAS_IOMEM help - Enables support for NAND Flash on JZ4740 SoC based boards. + Enables support for NAND Flash on JZ4740 SoC based boards. config MTD_NAND_JZ4780 tristate "Support for NAND on JZ4780 SoC" - depends on MACH_JZ4780 && JZ4780_NEMC + depends on JZ4780_NEMC help Enables support for NAND Flash connected to the NEMC on JZ4780 SoC based boards, using the BCH controller for hardware error correction. config MTD_NAND_FSMC tristate "Support for NAND on ST Micros FSMC" - depends on OF - depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 + depends on OF && HAS_IOMEM + depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 || \ + COMPILE_TEST help Enables support for NAND Flash chips on the ST Microelectronics Flexible Static Memory Controller (FSMC) @@ -506,19 +522,22 @@ config MTD_NAND_XWAY config MTD_NAND_SUNXI tristate "Support for NAND on Allwinner SoCs" - depends on ARCH_SUNXI + depends on ARCH_SUNXI || COMPILE_TEST + depends on HAS_IOMEM help Enables support for NAND Flash chips on Allwinner SoCs. config MTD_NAND_HISI504 tristate "Support for NAND controller on Hisilicon SoC Hip04" depends on ARCH_HISI || COMPILE_TEST + depends on HAS_IOMEM help Enables support for NAND controller on Hisilicon SoC Hip04. config MTD_NAND_QCOM tristate "Support for NAND on QCOM SoCs" - depends on ARCH_QCOM + depends on ARCH_QCOM || COMPILE_TEST + depends on HAS_IOMEM help Enables support for NAND flash chips on SoCs containing the EBI2 NAND controller. This controller is found on IPQ806x SoC. @@ -526,8 +545,20 @@ config MTD_NAND_QCOM config MTD_NAND_MTK tristate "Support for NAND controller on MTK SoCs" depends on ARCH_MEDIATEK || COMPILE_TEST + depends on HAS_IOMEM help Enables support for NAND controller on MTK SoCs. This controller is found on mt27xx, mt81xx, mt65xx SoCs. +config MTD_NAND_TEGRA + tristate "Support for NAND controller on NVIDIA Tegra" + depends on ARCH_TEGRA || COMPILE_TEST + depends on HAS_IOMEM + help + Enables support for NAND flash controller on NVIDIA Tegra SoC. + The driver has been developed and tested on a Tegra 2 SoC. DMA + support, raw read/write page as well as HW ECC read/write page + is supported. Extra OOB bytes when using HW ECC are currently + not supported. + endif # MTD_NAND |