diff options
Diffstat (limited to 'drivers/mtd/maps/ipaq-flash.c')
-rw-r--r-- | drivers/mtd/maps/ipaq-flash.c | 464 |
1 files changed, 464 insertions, 0 deletions
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c new file mode 100644 index 000000000000..712401810841 --- /dev/null +++ b/drivers/mtd/maps/ipaq-flash.c @@ -0,0 +1,464 @@ +/* + * Flash memory access on iPAQ Handhelds (either SA1100 or PXA250 based) + * + * (C) 2000 Nicolas Pitre <nico@cam.org> + * (C) 2002 Hewlett-Packard Company <jamey.hicks@hp.com> + * (C) 2003 Christian Pellegrin <chri@ascensit.com>, <chri@infis.univ.ts.it>: concatenation of multiple flashes + * + * $Id: ipaq-flash.c,v 1.3 2004/11/04 13:24:15 gleixner Exp $ + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <asm/page.h> +#include <asm/mach-types.h> +#include <asm/system.h> +#include <asm/errno.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#ifdef CONFIG_MTD_CONCAT +#include <linux/mtd/concat.h> +#endif + +#include <asm/hardware.h> +#include <asm/arch-sa1100/h3600.h> +#include <asm/io.h> + + +#ifndef CONFIG_IPAQ_HANDHELD +#error This is for iPAQ Handhelds only +#endif +#ifdef CONFIG_SA1100_JORNADA56X + +static void jornada56x_set_vpp(struct map_info *map, int vpp) +{ + if (vpp) + GPSR = GPIO_GPIO26; + else + GPCR = GPIO_GPIO26; + GPDR |= GPIO_GPIO26; +} + +#endif + +#ifdef CONFIG_SA1100_JORNADA720 + +static void jornada720_set_vpp(struct map_info *map, int vpp) +{ + if (vpp) + PPSR |= 0x80; + else + PPSR &= ~0x80; + PPDR |= 0x80; +} + +#endif + +#define MAX_IPAQ_CS 2 /* Number of CS we are going to test */ + +#define IPAQ_MAP_INIT(X) \ + { \ + name: "IPAQ flash " X, \ + } + + +static struct map_info ipaq_map[MAX_IPAQ_CS] = { + IPAQ_MAP_INIT("bank 1"), + IPAQ_MAP_INIT("bank 2") +}; + +static struct mtd_info *my_sub_mtd[MAX_IPAQ_CS] = { + NULL, + NULL +}; + +/* + * Here are partition information for all known IPAQ-based devices. + * See include/linux/mtd/partitions.h for definition of the mtd_partition + * structure. + * + * The *_max_flash_size is the maximum possible mapped flash size which + * is not necessarily the actual flash size. It must be no more than + * the value specified in the "struct map_desc *_io_desc" mapping + * definition for the corresponding machine. + * + * Please keep these in alphabetical order, and formatted as per existing + * entries. Thanks. + */ + +#ifdef CONFIG_IPAQ_HANDHELD +static unsigned long h3xxx_max_flash_size = 0x04000000; +static struct mtd_partition h3xxx_partitions[] = { + { + name: "H3XXX boot firmware", +#ifndef CONFIG_LAB + size: 0x00040000, +#else + size: 0x00080000, +#endif + offset: 0, +#ifndef CONFIG_LAB + mask_flags: MTD_WRITEABLE, /* force read-only */ +#endif + }, + { + name: "H3XXX root jffs2", +#ifndef CONFIG_LAB + size: 0x2000000 - 2*0x40000, /* Warning, this is fixed later */ + offset: 0x00040000, +#else + size: 0x2000000 - 0x40000 - 0x80000, /* Warning, this is fixed later */ + offset: 0x00080000, +#endif + }, + { + name: "asset", + size: 0x40000, + offset: 0x2000000 - 0x40000, /* Warning, this is fixed later */ + mask_flags: MTD_WRITEABLE, /* force read-only */ + } +}; + +#ifndef CONFIG_MTD_CONCAT +static struct mtd_partition h3xxx_partitions_bank2[] = { + /* this is used only on 2 CS machines when concat is not present */ + { + name: "second H3XXX root jffs2", + size: 0x1000000 - 0x40000, /* Warning, this is fixed later */ + offset: 0x00000000, + }, + { + name: "second asset", + size: 0x40000, + offset: 0x1000000 - 0x40000, /* Warning, this is fixed later */ + mask_flags: MTD_WRITEABLE, /* force read-only */ + } +}; +#endif + +static DEFINE_SPINLOCK(ipaq_vpp_lock); + +static void h3xxx_set_vpp(struct map_info *map, int vpp) +{ + static int nest = 0; + + spin_lock(&ipaq_vpp_lock); + if (vpp) + nest++; + else + nest--; + if (nest) + assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 1); + else + assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 0); + spin_unlock(&ipaq_vpp_lock); +} + +#endif + +#if defined(CONFIG_SA1100_JORNADA56X) || defined(CONFIG_SA1100_JORNADA720) +static unsigned long jornada_max_flash_size = 0x02000000; +static struct mtd_partition jornada_partitions[] = { + { + name: "Jornada boot firmware", + size: 0x00040000, + offset: 0, + mask_flags: MTD_WRITEABLE, /* force read-only */ + }, { + name: "Jornada root jffs2", + size: MTDPART_SIZ_FULL, + offset: 0x00040000, + } +}; +#endif + + +static struct mtd_partition *parsed_parts; +static struct mtd_info *mymtd; + +static unsigned long cs_phys[] = { +#ifdef CONFIG_ARCH_SA1100 + SA1100_CS0_PHYS, + SA1100_CS1_PHYS, + SA1100_CS2_PHYS, + SA1100_CS3_PHYS, + SA1100_CS4_PHYS, + SA1100_CS5_PHYS, +#else + PXA_CS0_PHYS, + PXA_CS1_PHYS, + PXA_CS2_PHYS, + PXA_CS3_PHYS, + PXA_CS4_PHYS, + PXA_CS5_PHYS, +#endif +}; + +static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; + +static int __init h1900_special_case(void); + +int __init ipaq_mtd_init(void) +{ + struct mtd_partition *parts = NULL; + int nb_parts = 0; + int parsed_nr_parts = 0; + const char *part_type; + int i; /* used when we have >1 flash chips */ + unsigned long tot_flashsize = 0; /* used when we have >1 flash chips */ + + /* Default flash bankwidth */ + // ipaq_map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4; + + if (machine_is_h1900()) + { + /* For our intents, the h1900 is not a real iPAQ, so we special-case it. */ + return h1900_special_case(); + } + + if (machine_is_h3100() || machine_is_h1900()) + for(i=0; i<MAX_IPAQ_CS; i++) + ipaq_map[i].bankwidth = 2; + else + for(i=0; i<MAX_IPAQ_CS; i++) + ipaq_map[i].bankwidth = 4; + + /* + * Static partition definition selection + */ + part_type = "static"; + + simple_map_init(&ipaq_map[0]); + simple_map_init(&ipaq_map[1]); + +#ifdef CONFIG_IPAQ_HANDHELD + if (machine_is_ipaq()) { + parts = h3xxx_partitions; + nb_parts = ARRAY_SIZE(h3xxx_partitions); + for(i=0; i<MAX_IPAQ_CS; i++) { + ipaq_map[i].size = h3xxx_max_flash_size; + ipaq_map[i].set_vpp = h3xxx_set_vpp; + ipaq_map[i].phys = cs_phys[i]; + ipaq_map[i].virt = __ioremap(cs_phys[i], 0x04000000, 0, 1); + if (machine_is_h3100 () || machine_is_h1900()) + ipaq_map[i].bankwidth = 2; + } + if (machine_is_h3600()) { + /* No asset partition here */ + h3xxx_partitions[1].size += 0x40000; + nb_parts--; + } + } +#endif +#ifdef CONFIG_ARCH_H5400 + if (machine_is_h5400()) { + ipaq_map[0].size = 0x02000000; + ipaq_map[1].size = 0x02000000; + ipaq_map[1].phys = 0x02000000; + ipaq_map[1].virt = ipaq_map[0].virt + 0x02000000; + } +#endif +#ifdef CONFIG_ARCH_H1900 + if (machine_is_h1900()) { + ipaq_map[0].size = 0x00400000; + ipaq_map[1].size = 0x02000000; + ipaq_map[1].phys = 0x00080000; + ipaq_map[1].virt = ipaq_map[0].virt + 0x00080000; + } +#endif + +#ifdef CONFIG_SA1100_JORNADA56X + if (machine_is_jornada56x()) { + parts = jornada_partitions; + nb_parts = ARRAY_SIZE(jornada_partitions); + ipaq_map[0].size = jornada_max_flash_size; + ipaq_map[0].set_vpp = jornada56x_set_vpp; + ipaq_map[0].virt = (__u32)__ioremap(0x0, 0x04000000, 0, 1); + } +#endif +#ifdef CONFIG_SA1100_JORNADA720 + if (machine_is_jornada720()) { + parts = jornada_partitions; + nb_parts = ARRAY_SIZE(jornada_partitions); + ipaq_map[0].size = jornada_max_flash_size; + ipaq_map[0].set_vpp = jornada720_set_vpp; + } +#endif + + + if (machine_is_ipaq()) { /* for iPAQs only */ + for(i=0; i<MAX_IPAQ_CS; i++) { + printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with CFI.\n", ipaq_map[i].bankwidth*8, ipaq_map[i].virt); + my_sub_mtd[i] = do_map_probe("cfi_probe", &ipaq_map[i]); + if (!my_sub_mtd[i]) { + printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[i].bankwidth*8, ipaq_map[i].virt); + my_sub_mtd[i] = do_map_probe("jedec_probe", &ipaq_map[i]); + } + if (!my_sub_mtd[i]) { + printk(KERN_NOTICE "iPAQ flash: failed to find flash.\n"); + if (i) + break; + else + return -ENXIO; + } else + printk(KERN_NOTICE "iPAQ flash: found %d bytes\n", my_sub_mtd[i]->size); + + /* do we really need this debugging? --joshua 20030703 */ + // printk("my_sub_mtd[%d]=%p\n", i, my_sub_mtd[i]); + my_sub_mtd[i]->owner = THIS_MODULE; + tot_flashsize += my_sub_mtd[i]->size; + } +#ifdef CONFIG_MTD_CONCAT + /* fix the asset location */ +# ifdef CONFIG_LAB + h3xxx_partitions[1].size = tot_flashsize - 0x40000 - 0x80000 /* extra big boot block */; +# else + h3xxx_partitions[1].size = tot_flashsize - 2 * 0x40000; +# endif + h3xxx_partitions[2].offset = tot_flashsize - 0x40000; + /* and concat the devices */ + mymtd = mtd_concat_create(&my_sub_mtd[0], i, + "ipaq"); + if (!mymtd) { + printk("Cannot create iPAQ concat device\n"); + return -ENXIO; + } +#else + mymtd = my_sub_mtd[0]; + + /* + *In the very near future, command line partition parsing + * will use the device name as 'mtd-id' instead of a value + * passed to the parse_cmdline_partitions() routine. Since + * the bootldr says 'ipaq', make sure it continues to work. + */ + mymtd->name = "ipaq"; + + if ((machine_is_h3600())) { +# ifdef CONFIG_LAB + h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x80000; +# else + h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000; +# endif + nb_parts = 2; + } else { +# ifdef CONFIG_LAB + h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000 - 0x80000; /* extra big boot block */ +# else + h3xxx_partitions[1].size = my_sub_mtd[0]->size - 2*0x40000; +# endif + h3xxx_partitions[2].offset = my_sub_mtd[0]->size - 0x40000; + } + + if (my_sub_mtd[1]) { +# ifdef CONFIG_LAB + h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x80000; +# else + h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x40000; +# endif + h3xxx_partitions_bank2[1].offset = my_sub_mtd[1]->size - 0x40000; + } +#endif + } + else { + /* + * Now let's probe for the actual flash. Do it here since + * specific machine settings might have been set above. + */ + printk(KERN_NOTICE "IPAQ flash: probing %d-bit flash bus, window=%lx\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt); + mymtd = do_map_probe("cfi_probe", &ipaq_map[0]); + if (!mymtd) + return -ENXIO; + mymtd->owner = THIS_MODULE; + } + + + /* + * Dynamic partition selection stuff (might override the static ones) + */ + + i = parse_mtd_partitions(mymtd, part_probes, &parsed_parts, 0); + + if (i > 0) { + nb_parts = parsed_nr_parts = i; + parts = parsed_parts; + part_type = "dynamic"; + } + + if (!parts) { + printk(KERN_NOTICE "IPAQ flash: no partition info available, registering whole flash at once\n"); + add_mtd_device(mymtd); +#ifndef CONFIG_MTD_CONCAT + if (my_sub_mtd[1]) + add_mtd_device(my_sub_mtd[1]); +#endif + } else { + printk(KERN_NOTICE "Using %s partition definition\n", part_type); + add_mtd_partitions(mymtd, parts, nb_parts); +#ifndef CONFIG_MTD_CONCAT + if (my_sub_mtd[1]) + add_mtd_partitions(my_sub_mtd[1], h3xxx_partitions_bank2, ARRAY_SIZE(h3xxx_partitions_bank2)); +#endif + } + + return 0; +} + +static void __exit ipaq_mtd_cleanup(void) +{ + int i; + + if (mymtd) { + del_mtd_partitions(mymtd); +#ifndef CONFIG_MTD_CONCAT + if (my_sub_mtd[1]) + del_mtd_partitions(my_sub_mtd[1]); +#endif + map_destroy(mymtd); +#ifdef CONFIG_MTD_CONCAT + for(i=0; i<MAX_IPAQ_CS; i++) +#else + for(i=1; i<MAX_IPAQ_CS; i++) +#endif + { + if (my_sub_mtd[i]) + map_destroy(my_sub_mtd[i]); + } + if (parsed_parts) + kfree(parsed_parts); + } +} + +static int __init h1900_special_case(void) +{ + /* The iPAQ h1900 is a special case - it has weird ROM. */ + simple_map_init(&ipaq_map[0]); + ipaq_map[0].size = 0x80000; + ipaq_map[0].set_vpp = h3xxx_set_vpp; + ipaq_map[0].phys = 0x0; + ipaq_map[0].virt = __ioremap(0x0, 0x04000000, 0, 1); + ipaq_map[0].bankwidth = 2; + + printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt); + mymtd = do_map_probe("jedec_probe", &ipaq_map[0]); + if (!mymtd) + return -ENODEV; + add_mtd_device(mymtd); + printk(KERN_NOTICE "iPAQ flash: registered h1910 flash\n"); + + return 0; +} + +module_init(ipaq_mtd_init); +module_exit(ipaq_mtd_cleanup); + +MODULE_AUTHOR("Jamey Hicks"); +MODULE_DESCRIPTION("IPAQ CFI map driver"); +MODULE_LICENSE("MIT"); |